RF Lightning Arrestor - N Female to N Male

The RF Lightning Arrestor is a Sealed Bulkhead Lightning Arrester which offers protection from overload in electronic circuits by diverting excessive current generated by thunderstorms directly to ground. The IP67-rated ARR-NF includes a silicone gasket, 5/8" (0.625mm) washer and 5/8"-24 (0.625mm) hex nut. These devices operate from 0Hz up to 8GHz and are tested to meet corrosion resistance, vibration, and mechanical/thermal shock requirements. The ARR-NF Lightning Arresters are ideal for outdoor networking applications, as well as low-power LPWA, private cellular networks, public safety, IoT, cellular vehicle to infrastructure, cellular IoT, cellular, and WiFi 6E/6/5/4 applications.

Quick Spec

• Operation Frequency: 0Hz ~ 8GHz
• Type: Gas discharge DC pass-through
• Connections:
• N plug (male), gold-plated brass center contact
• N jack (female), gold-plated brass center contact
• IP67 Rated
• Low-Band Cellular/ISM/LPWA band
• 400MHz to 960MHz frequency range
• 0.06dB to 0.11dB maximum insertion loss
• 1.0 to 1.1 maximum VSWR
• Midband Cellular/GNSS band
• 1.1GHz to 5GHz frequency range
• 0.14dB to 0.27dB maximum insertion loss
• 1.2 to 1.3 maximum VSWR
• ISM band
• 2.4GHz frequency
• 0.08dB to 0.16dB maximum insertion loss
• 1.0 to 1.1 maximum VSWR
• WiFI 6/5/4 band
• 2.4GHz to 6GHz frequency range
• 0.20dB to 0.39dB maximum insertion loss
• 1.2 to 1.3 maximum VSWR
• 50Ω impedance
• Input power
• 90W/CW at 30MHz
• 9W/CW at 3GHz
• 10kA surge current (wave 8/20µs)
• 230V or 300V (±20%) turn-on voltage
• ≥1GΩ insulation resistance at 100VDC
• Temperature Range: -55C ~ +105°C
• 5/8"-24UNEF threaded coupling fastening type
• MIL-STD-348A interface
• 0.85N/m recommended torque
• 500 cycle minimum connector durability

Dimensions

Resources

• Datasheet

Shipping List

• 1 x RF Lightning Arrestor - N Female to N Male