Questions for '911 (1978 – 1983)'

Do you have any info/recommendations re: Ziza led H4 replacement bulbs for my 81 911SC?

Sunday 03/14/2021 | 1981 | Other

Looking for feedback on LED replacement bulbs from ZIZA or other suppliers as direct swap for my H4 bulbs. Are these LED bulbs worthwile or are the replacement full H4 LED asemblies worth the additional cost? 

READ ANSWER

Getting keys cut

Wednesday 03/10/2021 | 1982 | Accessories

Hi, I'm a new member and this is my first time using the PCA website- think this is the right area. Hoping someone can maybe help with a key cutting question. I bought 2 of the new Flat Six keys to replace my very worn originals and took one to my local hardware store. They cut it but it doesn't fit (and they say they can't guarantee work on car keys). I've tried calling Porsche to get a recommendation of a key cutter and they say they don't know anyone. Can anyone recommend someone in the NY ...

READ ANSWER

1983 911SC- sunroof motor operates but sunroof will not open. Suggestions??

Wednesday 02/17/2021 | 1983 | Other

Sunroof will not open, although motor operates.

READ ANSWER

Interior Color

Tuesday 02/16/2021 | 1981 | Other

I have the original window sticker and it lists my body color and that the car has special leather interior but I can not find a match for the inside.  the color code on the window sticker is A2A292.  Does this tell me the interior color?

READ ANSWER

1979 911 SC Targa stalling

Saturday 02/13/2021 | 1979 | Other

911 1979 SC Targa - 115,000 miles Garage kept  I have owned the car for 8-9 years and it has had this problem since I purchased it. Original engine, rebuilt transmission/new clutch, valve adjustment 2,000 miles ago. Car will stall after extended driving, 20 miles. Cranks back up immediately. Does not stall after every outing, just sometimes. Sometimes will stall once, sometimes repeatedly. Always cranks back up immediately. What has been done: ...

READ ANSWER

Where can I find 911 SC production numbers by paint color? I’m buying a 1980 light blue metallic and would like to know how many Porsche produced in that color. Thanks!

Thursday 12/17/2020 | 1980 | Other

Trying to find quantity of 911 SCs produced in Light Blue Metallic paint. 

READ ANSWER

My 79 930 suffered a left front body damage in a collision. Anyone know a good body shop that can make her new again in the norther virginia area?

Sunday 12/13/2020 | 1979 | Body

Need to find a body shop that specializes in classic 930s

READ ANSWER

Recommended Indy shop in Sacramento?

Friday 12/04/2020 | 1978 | Engine

I'm hoping someone could recommend a good Indy shop in Sacramento valley area to get a 1978 911SC targa back into running shape.  Car has not been driven since it was parked around 9 years ago, but was mechanically sound the day it was stored.  Not looking to "overhaul" the engine, but would like to do the very minimum needed to get it back to driving shape.  Any Indy shops in SVR recommended that could do this job for me?       ...

READ ANSWER

The tachometer needle on my 83 SC floats sometimes, and the druck pressure gauge has a bit of a tremor under idle. Is this a gauge issue or an electrical issue?

Monday 11/02/2020 | 1983 | Electrical

The tach needle periodically "floats up" above what should be the true reading at startup and under normal driving conditions.  Appears to read correctly under acceleration and idle most times.  The druck pressure gauge also has a tremor (ticks between 4-5) at idle when the car is at operating temp, but appears to read correctly under load.  Trying to determine whether these are gauge issues or sensor issues (or whether that's one and the same).  Speedo, temp, oil level an ...

READ ANSWER

Is my car a Euro/grey market 911? VIN# 91A0132911

Tuesday 10/20/2020 | 1980 | Other

Hi - I have tried using the vin decoder, however I am having difficulty determining if my 10 digit vin (1980) was a U.S. spec car, or a grey market/european/ROW car. Can anyone help? VIN# 91A0132911

READ ANSWER

car floats at speed

Wednesday 07/08/2020 | 1982 | Body

HI PCA The car has been lowered, the person that services most things 911 for me does not think it needs a tail to stabilize it. The front smile has a small piece out of the bottom edge that I cut away after a friend hooked it over a parking curb. BTW, the last friend to drive it. Anyway, the car sways a bit, even on a day without great winds. Is it possible that I have lowered it too much for proper air flow on an SC? Speed range wo ...

READ ANSWER

cold start idle problem

Wednesday 07/08/2020 | 1982 | Fuel System

When starting cold, engine will start, but the idle rpm does not rev above idle speed. I have to increase the throtle to keep it running. Performance is fine. I'm thinking it's the Auxarily Air Valve.

READ ANSWER

Clutch not engaging

Monday 05/11/2020 | 1982 | Transmission/Clutch

Ok, I made the bad decision this weekend of letting my brother in-law attempt to drive my 1982 911.  He dumped the clutch and killed the engine, then after starting it again he dumped it a second time but I heard a pop and the car remained running.  From then on the clutch would not engage in any gear including reverse..  While in gear with the car on or off it acts like it is in neutral and will roll when pushed.  The shifter feels like it is going into all the gears just ...

READ ANSWER

windshield replacement

Monday 04/20/2020 | 1982 | Body

Does anyone know of a good windshield replacement installer in the Columbia / Baltimore MD area?

READ ANSWER

Turbo conversion

Sunday 04/12/2020 | 1979 | Engine

I purchased a1979 SC with its original 3.0L converted to a Turbo, PO added 930 P&C’s, fuel system, IC, ignition system and external oil coolers. Motor is out and completely disassembled. I want to keep the Turbo upgrade and need guidance on the internals. I measured out the crank it's in spec and is the original SC crank, rods are SC, heads are SC and had work done to the intake ports, engine block is 3.0L. Question: what can I do to strengthen the current crank and block to kee ...

READ ANSWER