Questions for '356'

Leather Hood Straps

Friday 12/01/2017 | 2008 | Body

Hello All: I am a somewhat experienced leather craftsman and have been thinking about making replacement parts for the leather straps that I sometimes see on the hoods of old 356 and 550 spyders.  But to be honest, I'm not sure if the kinds of straps I see were standard equipment on these older cars or if they were added as aftermarket accessories.  If these kinds of straps were factory accessories, I'm curious to know where I can find more information.  Given some me ...

READ ANSWER

aircooled mechanic in north Georgia?

Tuesday 07/05/2016 | 1959 | Engine

I just got a 2003 Intermeccanica Roadster with a cb 1775 engine - that needs rebuilding. (The car also will need suspension and trans work - lucky me) Anyone know a good aircooled mechanice in north Georgia or Chattanooga? Thanks.

READ ANSWER

I have a 356 B 1600 Super. The brakes squeal a lot. They stop good but are noisy. Any recommendations?

Tuesday 12/29/2015 | 1960 | Brakes

I have a 1960 356 B 1600 Super.  The brakes squeal a lot.  The car seems to stop ok.  Do you have any recommendations?  Thanks  John Readel

READ ANSWER

fog lights

Wednesday 02/19/2014 | Other

Model: 356A, Year:1959, Mileage:120K, Type of use:Street use onlyI have a 1959 coupe and the Kardex says it originally had fog lights. The switch, wiring, and mounting holes in the bumper are present but the fog lights are missing. What make and model of fog lights should I look for to duplicate the original lights? Are modern reproductions of thses lights available? Many thanks!

READ ANSWER

1976- 912E Rear Sway Bar

Friday 01/24/2014 | Suspension

Model: 912E, Year:1976, Mileage:90,100, Type of use:Street use onlyWas there a factory option back in 1976...Is there a factory part#s (parts needed) to install a factory type sway bar? If not, what might be the best one (Mfgr. and mm to get from a secondary supplier. My is not used for racing and autocrossing. I just would like it to handle "flater" on higher speed corners.Thanks, Allen Wehr, Minneapolis ...

READ ANSWER

leaking fuel pump

Friday 10/11/2013 | Fuel System

Model: 912, Year:1969, Mileage:145000, Type of use:Street use onlyjust rebuilt fuel pump on 912 and one year later it is leaking gas. Is this normal for California gas formula? I would of course like to repair but would prefer not to buy a total rebuild kit. The car is in storage and I start it every 3-4 months. Recommendation please.

READ ANSWER

tire size options, 1967 912 coupe

Thursday 08/22/2013 | Wheels and Tires

Model: 912, Year:1967, Mileage:145000, Type of use:Street use onlyWhat are my tire size options. Currently I have 195-60-r15 on Fuchs

READ ANSWER

4 cam Engine

Sunday 08/18/2013 | Engine

Model: 356, Year:1956, Mileage:76,000, Type of use:Street use onlyI have located a true Barn Find 1956 356 Cab. How can I determine if it has a 4 cam engine? I plan to make an offer on the car and that could make a big difference.

READ ANSWER

Fuel in oil

Friday 08/16/2013 | Engine

Model: 912, Year:1968, Mileage:68,000, Type of use:Street use onlyMy '68 912 is in fact in a barn in Maine, and only driven on sunny Sundays (~68K). I started it up earlier this summer and it would not idle well. I cleaned the carbs and tried again the other day, with the same result; it revved fine but would not idle. I then noticed that there was a lot of oil and possibly gas coming out the exhaust. When I pulled the dipstick the oil looked and smelled odd.I just drained t ...

READ ANSWER

Vapor lock?

Monday 08/12/2013 | Fuel System

Model: speedster, Year:1958, Mileage:10000, Type of use:Street use onlyWe have a 58 Speedster here in Denver, CO. On a hot day the car will run for 30 minutes or so and then simply die, ie like vapor lock occurs. We let her sit for 15 to 20 minutes and she is good for another 30 minutes?Could this be vapor lock caused by fuel line routing problem ? Or must I run race gas in this car ? thanks for the help. ...

READ ANSWER

oil leak

Monday 07/22/2013 | Engine

Model: 912E, Year:1976, Mileage:130000, Type of use:Street use onlyMy 1976 912E has developed a hefty oil leak that seems to be problematic on the passenger side, with a lot of oil on the floor and burned oil on the exhaust rolling from the passenger side rear wheel well after a ten or fifteen minute drive. I checked and replaced the valve cover gaskets and the oil return tube seal rings, to no avail. The only thing else I can think of that could be slinging oil near the back bump ...

READ ANSWER

One fouled plug

Sunday 06/23/2013 | Engine

Model: 912E, Year:76, Mileage:82,000, Type of use:Street use onlyI have one fouled plug. No apparent oil smoke. It looks like fuel fouling to me. I did a compression test and hot the cylinder with the fouled plug tests 16% higher than the others which are all the same. A cold compression test shows all cylinders the same while understandably lower. I've never seen this before. I am picturing one injector that is rich...? Any ideas? Thanks. ...

READ ANSWER

356 Speedster America

Wednesday 05/29/2013 | Body

Model: Carrera, Year:1996, Mileage:68,000, Type of use:Both Street & TrackI am a 35 year PCA member and Porsche model collector. Recently I obtained a very highly detailed 1:43 scale model made by Premium ClassiXXs in Germany. The model is labeled as a Porsche 356 Speedster "America" with racing number 5 and Rennstube Steber on the back. I cannot find any information on a Speedster "America". Are there any 356 technical experts in PCA that can tell me if Porsche ever actually ma ...

READ ANSWER

flywheel removal

Wednesday 03/06/2013 | Engine

Model: 912, Year:1967, Mileage:93000, Type of use:Street use onlyhow to remove flywheel on 1967 912

READ ANSWER

Oil Cool case leak

Thursday 12/20/2012 | Engine

Model: 912, Year:67, Mileage:125000, Type of use:Street use onlyA friend of mine is in the process of rebuilding his 912 engine. Back in the 70's I rebuilt a 61' 356. After I completed the work I developed a crack in the case just below the oil cooler radiator. My mechanic at the time told me there was retrofit to prevent the case from cracking. are you familiar with this fix? I'd like to pass it on the my friend. ...

READ ANSWER