Emerging Objects' ONEder Grant research, Under Fire, transforms two of California's defining climate threats, wildfire and extreme heat, into building materials that remember rather than destroy. Co-founders Ronald Rael and Virginia San Fratello share with us how they 3D-printed wildfire ash from California fires into a 22-foot tapestry, and how a foot-thick earthen pump house in the Colorado high desert holds a steady interior temperature through weather extremes with no mechanical heating. Together they explore the alchemy of turning ash into printable filament, the cultural memory embedded in earthen building, and why good design research has to leave room for failure along the way. Listen in for an overview of Emerging Objects’ research for architects, designers, and anyone curious about building for a climate-impacted future.
We want to use materials that are local to us, like earth, wildfire ash, and salt, because they're part of the place we live. A lot of these materials are already in the waste stream; we think of them as viable building materials, not trash." Virginia San Fratello, Emerging Objects
CCB: Welcome to the ONEder Podcast. The question today is, what if the future of building is hiding in plain sight? In the earth beneath our feet and the ash left behind wildfires? We're really excited to welcome Ronald Rael and Virginia San Fratello to the ONEder Podcast today. Ronald and Virginia are the co-founders of Emerging Objects and their research project, Under Fire, pursues exactly that question on two fronts. On one side, a 22-foot tapestry made from wildfire ash collected from recent California wildfires transformed through biopolymers and 3D printing, (that was easy for me to say) Into something that builds rather than destroys. A pump house with foot-thick earthen walls that held steady at 57 degrees on a night the desert dropped to 38 degrees. No heating system, just mass, material, and time. Together these two experiments ask the same fundamental question from different angles. Can we design and build for a climate-impacted future by returning to the intelligence already embedded in the world around us?
Ronald, Virginia, welcome to the ONEder Podcast.
Ronald Rael: Thank you.
Virginia San Fratello: Thank you so much.
CCB: We are so excited to have you here. So first off, I want to ask: Emerging Objects describes itself as a 3D printing “make tank”. And looking at your portfolio, you've printed with salt and wood waste and cement, corks, ceramics, coral, and now wildfire ash and adobe. For listeners who are new to your work, how did Emerging Objects come to be? What's the through line connecting 15 years of experimenting with materials that most people wouldn't think of putting in a printer?
Ronald Rael: Thanks, Carolyn. You know, Emerging Objects was founded on a really fundamental principle, which is that the early onset of 3D printing, materials and machines were very inexpensive and very inaccessible. And our curiosity was, could we use the materials around us? And in the same way, could we use machines that were around us and softwares that were around us? There's sort of an ecosystem that draws from ideas connected to the slow food movement, for example. Thinking about what are the foods available around us? For us, what are the materials and resources available close by that we can draw from? And so, the idea of the make tank was very much like a think tank, but rather than ideas flowing, the making is flowing in some ways literally flowing. And so we're constantly making as a way to think and to understand and to learn and to experiment.
CCB: Fantastic. There will be a web page devoted to this particular podcast where you're going to have links to a lot of the things that we're talking about and to Ronald and Virginia. So you'll be able to find out lots more about them if you so desire. Okay, so on your ONEder Grant project, the research is called Under Fire and it's clearly personal as much as it is technical. How did witnessing the escalation of wildfires in California shape the direction of some of this work?
Virginia San Fratello: Well, of course, we were living through these days of the wildfires back in 2020 alongside the COVID pandemic, which I think amplified to the conditions because we were all stuck at home. We couldn't be with other people. We needed to be outside to walk and get fresh air, but even that was proving to be difficult because of all of the ash that was floating up over the Bay Area. Back in 2020, we had the worst air quality in the world if you were following those statistics. And even in September 2020, we had in the Bay Area, Orange Sky Day, which is the day that the sun never came up. And a lot of us remember that, I think as being this kind of traumatic turning point of, oh my, like the world is changing. This is devastating. The sun is not coming up and the sun is not setting. And it was a horrifying event. And we were living through that.
And I remember the wildfire ash was blowing over my house in Oakland, and it was raining down on the house and the cars and the sidewalks. And I decided to go out and actually collect some of the ash off of the car hood and the windowsills. And I had no idea what could be done with it, but I thought here's an opportunity to potentially 3D print with it or use it in some way in the future to help us remember what we're going through now, because I do think sometimes we have these horrifying experiences and then time passes, days and nights, days and nights and we slowly forget about that event or about that moment or about that devastating period. And I thought, let's collect this ash so that we don't forget, so that we can continuously think about not only this particular event, but wildfires have been happening in California for many, many decades and hundreds of years. And there are moments where people try to address the problem and then, we're no longer in a drought, we don't have them, we forget to address the problem. And this would be something potentially that would help us remember this is an ongoing problem that we need to address. So, we collected this wildfire ash with the idea that we would do something with it in the future. And it took some years to figure out what to do with it. And we did a number of tests but ultimately came back to this idea of 3D printing with it, because that's what we do. We develop materials for 3D printing.
CCB: Okay, so walk us through the alchemy of turning wildfire ash into a printable filament. Like, what happens?
Virginia San Fratello: Yeah, so well, I'll just preface this by saying I tried a couple of different ways of 3d printing with it I put it in a paste extrusion printer. That's normally used for printing with printing clay and that turned out to be pretty devastating. I cracked the acrylic tube and I and I say this because whoever's listening, I want them to know that this wasn't an easy and perfect process. There was a lot of kind of failure and experimentation along the way, but ultimately decided to develop it for desktop printing to use in a standard desktop printer which uses filament and so in order to make that I had to sift through the wildfire ash and sift it down to a very, very, very fine particle size and I started that process by just using like a kitchen sieve. And then getting finer and finer sieves till it's down to a really, really fine particle size that can then be compounded with a biopolymer. Which is in the United States usually a corn based Polymer or plastic and those two materials are mixed together and made into a slurry, which is then dried into little chunks or particles, little pellets. We worked with a company called Proto pasta to extrude that Biopolymer compound into a filament which could be used in any desktop printer. And it took a couple of iterations to make it so that it would really work well in the printer without clogging the hot end, but we finally got there
CCB: You also had to have that ash tested, didn't you, for heavy metals?
Virginia San Fratello: We decided to have the ash tested for heavy metals. There was a period of course while we were using it prior to testing, but we were using it very safely with gloves, respirators, etc. And then eventually we had it tested by two professors at the University of Southern California for heavy metals. And it turned out to be quite safe. There was nothing extremely dangerous or toxic about the material that we were using, which makes me feel good about handling the filament and the objects that have been created with that material now."
CCB: Okay, I have one more question about this portion of the project and that is some of the materials or some of the printed objects that you came up with are going to create something else and I'd love for you to describe the smoke screen tapestry and also the involvement of your students at San Jose State University in the creation of those.
Virginia San Fratello: So. some of the early experiments or some of the early objects were these small vessels that we created. But as architects, I think we were interested in creating something larger that wouldn't just be an object in the interior, but actually creating something out of the wildfire ash that would be part of the interior architecture. So we decided to scale this up to create a curtain, which we call the smoke screen. And this curtain is made out of thousands of 3D-printed beads that are printed out of the California wildfire ash. And they are strong in combination with some black porcelain beads. And the black porcelain was chosen because it is fired to a really high temperature in the kiln, which makes it fire-resistant. So this smoke screen is composed of 3D-printed California wildfire ash, the material itself, and then another material that is resistant to wildfire. And they come together to make this very large curtain, it's a very large screen that reminds us of the structures and is embodied and made of the structures that we have lost. And these last fires in California, we've lost over 16,000 structures, different types of buildings. And so here's a new piece of a building that's made out of what we have lost. I worked with a group of art and design students at SJSU to fabricate some of the porcelain beads in a series of three short workshops. And this was an opportunity for the students to kind of get their hands dirty, to learn by doing, and to make the beads. And during the time that they were making beads, I was presenting this research to them, the Under Fire research, but also sharing with them the history of the different materials that we've developed for 3D printing, which was something that many of our incoming students have never heard of before. So it was completely radical for them to think, oh my gosh, you can make something out of wildfire ash, you can make a building out of salt. So, I think it was a moment for them to think about, what is my future here at San Jose State University look like in the Department of Design or look like an interior design? I thought I might be picking out upholstery or I might be selecting furniture. And yes, you're going to do those things, but you also might be inventing a material while you're here. And I think that was an epiphany for a lot of the students and they were excited about it. And there was even a little core group that wrote me later and they said, can we come back and work with you some more on this project than other projects? So, I found a little research group, which was really nice.
CCB: That's fantastic. Okay, so we go from almost like the micro looking at the small objects to the other portion of this research project, which is more on the macro side, I'm going to say and interestingly enough tapping a material that is always with us and so Ronald I'd love for you to start to describe the pump house and I'm not going say La Casa de la Pompa because I probably wouldn't say it right
Virginia San Fratello: That sounded pretty good.
Ronald Rael: Yeah, so, you know, our work sometimes calls attention to issues and then sometimes addresses it. It happens in poetic ways and it happens in very pragmatic ways. The Casa de la Pompe is a very pragmatic project that is meant to protect a wellhouse at 8,000 feet above sea level in the Colorado landscape that has been also devastated by fires in the many past decades, but also in the in the past several years. But it's also a high alpine desert where the temperature swings from 20 to it can go up to 50-60 degrees in one single day. And so this project used Earth, which is a material that represents the oldest buildings on the planet and certainly the oldest buildings in California. It's a fire-resistant material often known as Adobe in Spanish, Adobe. And over the last eight years, and especially in the last three or four years, have been really dedicated to advancing the technology of using additive manufacturing 3D printing for the making of earthen buildings. And much of this has been research, but slowly, and maybe even quickly, moving into the making of buildings, fireproof buildings that are non-toxic, that are recyclable, that have incredible longevity, and that are made out of the soil right beneath our feet. And in this case, have a tremendous thermal mass.
And there's maybe two ways to think about how thermal mass is appropriate in this context of extreme temperatures. And one is the fire resistance and the fire resiliency. Fire resiliency meaning that it doesn't burn, but the building material actually improves after fire. And so you can reuse that material. There's no chemical transformation. But also the tremendous thermal mass also keeps buildings very cool in very hot temperatures as well. So, fires are related to climate change. The earth is getting warmer. Buildings made of earth can offset the amount of energies that are used to cool buildings in contemporary buildings using air conditioning. So there's a lot of advantages to use this building material. And so the pump house is a small research project that demonstrates that thermal mass capability. So as you mentioned early in the podcast, we see temperature swings down to 10 below zero and inside the building retains a very consistent temperature.
CCB: On the web page for our listeners, the research report is also included and you'll be able to see some of the images from the project. But when you see the very large 3D printing robot building the one-foot-thick adobe wall, it creates this kind of like dichotomy in appreciation, understanding of earth being created, changed into something else by a robot. So, I think there's like that interesting challenge to accept everything that's going on in our world today, all the capabilities, and you show it very, very clearly. I thought there was an interesting comment that you made about describing the walls as negotiating with the environment rather than sealing it out. That's such a different philosophy from how we typically think about building envelopes. So where does that thinking come from?
Ronald Rael: Well, that thinking may come from my own personal background. I think my family has been living continuously in buildings made of earth, probably for the last several thousand years. And I still live in a building made of earth built by my great grandfather. And so building at one time was a land-based practice. Now today it's a consumer practice. You buy the materials; you hire someone that you probably don't know to navigate all the materials that are used to make up a wall. And there could be 20 different companies that are making many different materials that are in six inches of a wall compared to the understanding that someone you may know, like your grandfather, your father or your grandmother dug the dirt, cultivated that dirt, build the building, clean that building. And so it continues this and recognizing that in some cases the buildings return to the earth as well. If they're abandoned, they don't go to landfills. They don't go to dumps. They don't burn and produce toxic waste. Actually just return quietly and gently back to the earth. And so I think when I say that we navigate this is that it's a heritage practice that's navigated, not a construction practice that is devoid of personal meaning. Like you can't really walk into a construction site and ask if you can participate because it's highly specialized and very dangerous. But you can often find many people building buildings made of earth today and they welcome the help and that knowledge base gets passed on.
CCB: Oh my gosh, that's just so beautiful. I, momentarily I'm interjecting a personal observation. I just came back from two weeks in Ireland on a trip visiting where my ancestors come from. And the structures are very much still like that and built by community in a lot of the smaller rural areas. It's that feeling of connection in a way that, to your point, we don't have with today's construction of oftentimes lovely structures. Anyway, which makes me think about the whole concept of meaning and memory as it relates to design. And I'd love for both of you to talk about how might that be presented in the work that you've been doing.
Ronald Rael: There's a number of ways that meaning and memory are connected to the work we do. And one is just the acknowledgement of material as a cultural phenomenon that has a provenance. And what I mean by that is that I think we're often interested in understanding where material came from, what has been its trajectory. For example, wildfire ash and what brought wildfire ash to the top of the car hood? What was that journey? What was that provenance? And we ask that for all materials that we've used. We printed with salt and coffee and sawdust and grape skins and earth. And so in each case, we think of that as kind of a material culture that exists. And so when I say culture, it's not only that a tree comes from a forest, but there's a culture of harvesting trees, the tools that are used to harvest trees. But then there's also a culture that is decimating forests and there's a culture that's transforming the climate. And so the trees aren't growing or they're diseased because of beetle kill pine. And so we want to understand that larger ecosystem of the politics and nature of what gives an architect a building material.
Virginia San Fratello: Also, from a practical note. We want to use materials that are local to us like earth, wildfire ash, salt, chardonnay grape skins, because they are very much a part of the place where we live. A lot of the materials that we're using are in the waste stream already. And I think that's something that is an important part of our work as well. Thinking about waste materials, not as trash, but as viable building materials. And we might not have started this practice thinking that we have to use recycled materials, but I think we are growing every year by using those materials. Recently, for example, we've been 3D printing with eggshells, right, just collecting thousands and thousands of eggshells and recognizing that these materials that are in the local waste stream have incredible value. And they're our own materials, so they're very personal, so they have these cultural stories, they have personal connections to our day-to-day lives as well.
CCB: Both of you work in academia as well, and both of you share practices and share thinking and concepts with students who are coming up in our world of design. And I'm wondering, what are you seeing from receptivity? Virginia, you talked about how some of those students want to come back and help you work, but how receptive is our new generation of design to the work that you're doing?
Virginia San Fratello: I was going to say I just taught a studio at the University of Texas at Austin where I asked students to choose a local material that's in the waste stream and to develop and transform that material to think about new products that could be made using this material to think about new architectural applications using this material and we spent the whole first part of the semester literally just developing this material and there were some fascinating choices for example one group chose Sotoal which is pretty much a very regional material and hasn't been experimented with or researched on by anyone in the world outside of making alcohol with it so they were using the byproduct of this alcohol manufacturing process and they're going to continue this research out of the final review they have someone who wants to keep working with them to develop commercial products in the future and I think that's really exciting for them and they recognize the problems around climate change they recognize the problems around waste and they feel really strongly about moving forward in this space
Ronald Rael: I like to pose questions that incite skepticism in students. I've taught studios that discuss high security prisons and rural areas of border walls, Native American slavery, and often those are related to these materials, systems that I spoke about. I think even robotics and earth are materials and systems that incite skepticism. There's preconceptions around what an earth building is. Sometimes people think it's for the poor, or it's only in rural areas, or it's in developing countries. But as I noted, the oldest buildings in California, the most celebrated buildings in California are made of earth. Ronald Reagan lived in a building made of earth in California called the Western White House. It spans continents and economies of scale.
Students are sometimes skeptical of can earth be a material in the 21st century, and for people with particular economic status, or for certain programs, is a robot a good idea. I talked a lot about community and building with earth, and now I'm saying, well, it might be a robot can do it. And that raises a lot of questions. In my studios, I talk a lot about three AIs, ancestral intelligence, additive intelligence, and artificial intelligence. And young students today are very skeptical of artificial intelligence for many, many reasons. So the past studio that I taught at Berkeley was a studio that students did storytelling through large language model videos, AI videos. We thought about earthen architecture in the restoration of historic building in Colorado made of Adobe, where indigenous slavery was practice and recorded. And for me, it's those kinds of questions that allow students to determine how they want to move forward. I don't then categorize how a student should operate or what they should think, but I like to put in front of them difficult questions so they can make difficult decisions about how they want to design in the world.
CCB: So, for everyone in the Bay Area, there is going to be an exhibit coming up at Yerba Buena Center for the Arts, and I think it's called Sanctuary. Is that still the name?
Virginia San Fratello: The final name is well, Prototypes and Provocations.
CCB: Excellent. Okay. So all of us in the Bay Area have the opportunity to go through the exhibition and see some of the work that Emerging Objects has been working on. And it'll be in September of this year, 2026. And my question to you is what do you hope people feel when they walk into that space?
Ronald Rael: It's actually challenging to reflect on 20 years of work. And I think the title, Prototypes and Provocations, is a good one because everything from the work on the border wall or additive manufacturing, we see as a prototype. It's part of this make tank idea that we're making and through the act of making, we're thinking and deriving meaning and those prototypes teach us something and I hope they teach others something as well. This question like what do people feel? I just hope they recognize that design doesn't have to placate to any kind of status quo. We can actually challenge status quo and innovate in resistance to that status quo. Maybe that's what I feel is the aspiration of our work and I hope it comes across that way.
CCB: Well, I can definitely anticipate that there will be a lot of thinking and a lot of questioning about practices. When you are exposed to the work of Emerging Objects, it does make you stop and wonder, which is, I think, always valuable for folks to, you know, to short circuit the standard status quo, if you will, or the practical everyday thinking. I want to say, gosh, thank you for this remarkable conversation. It always ends faster than I want it to. Are there any final comments that you'd like to make about the work that you did? One thing I will say is, One Workplace is very honored on a regular basis to support the work of designers in our communities with the ONEder Grant, which either adds to ongoing research work or sometimes starts up new. So as recipients of the ONEder Grant, again, we're delighted that you have been continuing to do the work that you're doing. And I just wonder, what might you have for final comments?
Ronald Rael: I'll just say that I'm, you know, I think we're very grateful for the opportunity to do this research. And as research, it doesn't stop. And so in the pump house, we are testing thermal mass and building codes by default go by insulative values. And so it's denied the opportunity to use thermal mass in buildings. But because there are sensors measuring the ambient temperatures on the inside and outside, in a current project we're working on, we use that data to demonstrate that the capacity of thermal mass, we're working with building officials and other professionals in a county where we're attempting to build the first 3D printed earthen buildings. The lab reports came back and say, you know, that that wall you're building has the same insulative value as an R40 wall through thermal mass, which is double the standard of contemporary R value requirements in a commercial building. So it's a big win. So thank you ONEder Grant.
CCB: Well that's fantastic to hear.
Virginia San Fratello: This grant, this research has been really wonderful for us because we're very good at making and designing. We don't always follow through with the scientific research and testing and that's what this grant allowed us to do, maybe forced us to do a little bit and there were some really wonderful outcomes there. So thank you for that.
CCB: Well, I'm going to repeat, if you're in San Francisco this fall, you're definitely going to want to stop by Yerba Buena Center for the Arts and see the exhibit, whatever the name of it is, and follow up with Ronald and Virginia through the website. Learn more about Emerging Objects. Our ONEder Grant exists because we believe that design research worth doing deserves support. And Ronald and Virginia's work is exactly why it's such a great demonstration. Thank you both for spending the time with us and for building things that ask us to pay attention to the world that we're in.
Virginia San Fratello, Thank you.