Before you Begin

Moisture can begin damaging gear immediately after exposure.

Proper recovery starts by minimizing additional damage while DRYOUT removes moisture.

Keep these principles in mind:

• Power off electronic devices immediately after moisture exposure.

• Do not charge wet electronics.

• Do not intentionally apply direct heat to wet gear.

• Remove trapped moisture as soon as practical.

• Allow sufficient recovery time before returning gear to service.

 

Step 1- Power Down and Prepare

If your gear contains electronics:

• Turn the device off immediately.

• Disconnect external power sources.

• Remove batteries when the manufacturer permits.

• Remove memory cards or removable accessories when practical.

Avoid repeatedly turning the device on to test whether it has recovered.

Electrical current flowing through moisture can permanently damage electronic components.

​

Remove Moisture Traps

Remove anything that may prevent moisture from escaping, including:

• Protective phone cases

• Tablet covers

• Laptop sleeves

• Charging cables

• Dust covers

• Lens caps

• Magazine pouches

• External accessories

• Other removable covers

The more exposed the gear is to the DRYOUT material, the more effectively moisture can migrate away from the gear.

​

Contaminated Gear

If the gear has been exposed to contaminants such as:

• Saltwater

• Ocean spray

• Chlorinated water

• Mud

• Dirty water

• Sweat

• Coffee

• Soda

• Sports drinks

• Soap

• Detergent

• Sunscreen

• Chemicals

follow the manufacturer's cleaning recommendations whenever available before placing the gear into DRYOUT.

Removing contaminants helps reduce long-term corrosion and residue buildup.

​

Remove Standing Water

Before using DRYOUT:

• Shake out pooled water whenever appropriate.

• Wipe away visible moisture using a clean, dry cloth.

• Do not attempt to completely dry the gear before placing it into DRYOUT.

DRYOUT is designed to remove remaining visible and unseen moisture after standing water has been removed.

 

Step 2- Place Gear into a DRYOUT-engineered product

Place the gear inside the DRYOUT-enabled product as intended.

General recommendations:

• Allow as much exposed surface area as practical.

• Avoid tightly wrapping gear unless the product is specifically designed to do so.

• Avoid stacking multiple pieces of gear together.

• Close the DRYOUT-enabled product completely.

DRYOUT begins removing moisture automatically once the gear is enclosed.

No electricity, batteries, or activation are required.

 

Step 3- Allow Sufficient Recovery Time

Recovery time depends on several factors.

​

Gear Type

Larger or more complex gear generally requires additional recovery time because moisture must migrate farther before being absorbed.

Examples include:

• Laptops

• Long guns

• Camera lenses

• Drone controllers

• Night vision devices

​

Moisture Exposure

Protection (Light Exposure)

Examples include:

• Humidity

• Condensation

• Sweat

• Dew

• Light rain

• Brief exposure to moisture

These situations generally require shorter recovery times.

 

Rescue (Heavy Exposure)

Examples include:

• Heavy rain

• Significant moisture intrusion

• Water splashes

• Prolonged exposure

• Partial submersion

• Full submersion

These situations generally require substantially longer recovery times.​

​

Recovery Time Tables (click link)

Smartphone

Earbuds

Tablet

Laptop

Over-Ear Headphones

Camera Lens

Night Vision Goggles

Long Gun

Hand Gun

Drone Controller​

​

Ambient Temperature

Warmer environments generally improve moisture-removal performance.

Cold environments slow moisture migration.

Freezing temperatures may temporarily pause moisture movement until the gear warms above freezing.

For this reason, recovery times increase as temperature decreases.

​

Relative Humidity

High humidity slows moisture removal because less moisture can be released into the surrounding air.

Dry air generally produces faster recovery.

 

Airflow

Normal airflow around the DRYOUT-enabled product helps moisture leave the DRYOUT material over time.

Completely stagnant environments may increase recovery time.

 

Contaminants

Additional recovery time may be required following exposure to:

• Saltwater

• Chlorinated water

• Mud

• Dirt

• Beverages

• Chemicals

• Soap

• Sunscreen

Contaminants can slow drying and increase the likelihood of corrosion.

When contaminants are present, always allow additional recovery time.

 

Step 4- Returning Gear to Service

 

Electronic Devices

Before powering electronics back on:

• Complete at least the recommended recovery time.

• Inspect the device for visible moisture.

• Verify that charging ports and openings appear dry.

• Ensure no condensation or fogging remains.

If the device does not function properly after the recommended recovery time:

• Turn it off immediately.

• Return it to the DRYOUT-engineered product.

• Allow additional recovery time before testing again.

Avoid repeatedly cycling power while moisture may still be present.

 

Non-Electronic Gear

For firearms, optics, tools, knives, and other non-electronic equipment:

Allow at least the recommended recovery time before returning the gear to service or storage.

Before use, inspect for:

• Condensation

• Fogging

• Water droplets

• Damp residue

• Rust

• Corrosion

• Surface oxidation

If any signs of retained moisture remain, continue recovery before use or storage.