고부가가치 자전거 개발을 위한 제품모델 및 관리시스템 개발

Transactions of the Korean Society of Automotive Engineers, 2014

There are many type vehicles in army. They are jeep and truck by basic type. Recently many countries are developing new conceptual military vehicles. And they try for export of those military vehicles to another countries. Also Korea Army is developing military tactical and combat vehicles, and considering various necessary factors for export. But as easing the cold war system tension and reducing of defense budget, decrease in quantity of military vehicles. We think this trend is accelerative. Therefore Government(Military) and defense industry make every effort to increasing sales and productions. In this study, I'll inquire '2013~2017 basic plan for defense industry promotion' for strengthen the power of international competitiveness , and then suggest the increasing method for productions of military vehicles.

Korean Journal of Construction Engineering and Management, 2010

The Journal of Korea Navigation Institute, 2015

This paper introduces development of the MATLAB GUI based software for generating GPS RINEX observation file. The purpose of this software is to generate GPS measurements of reference station or dynamic user, which are similar to the real GPS receiver data, accurately and efficiently. This software includes two data generation modes. One is Precision mode which generates GPS measurements as accurate as possible using post-processing data. The other is Real-time mode which generates GPS measurements using GPS error modeling technique. GPS error sources are calculated on the basis of each data generation mode, and L1/L2 pseudorange, L1/L2 carrier phase, and Doppler measurements are produced. These generated GPS measurements are recorded in the RINEX observation version 3.0 file. Using received GPS data at real reference station, we analyzed three items to verify software reliability; measurement bias, rate of change, and noise level. Consequently, RMS error of measurement bias is about 0.7 m, and this verification results demonstrate that our software can generate relatively exact GPS measurements.

The Journal of Society for e-Business Studies, 2011

Korean Journal of Sport Biomechanics, 2012

The purpose of this study was to develop an electric riding machine for cycle fitting to control riding posture easily, to measure frame size quantitatively, and to overcome disadvantages of the traditional systems. The electric riding machine consisted of actuator, load controller, and display & control unit. The actuator unit by BLDC(BrushLess Direct Current) motor drives the saddle height up and down, the crank forward and backward, the handlebar up and down, and the handlebar forward and backward. The load controller unit controls loads by Eddy current controller with electromagnet and aluminum circular plate. The display & control unit consisted of frame size controller and display panel which shows top tube length(485~663mm), head tube length(85~243mm), seat tube length(481~671mm), and seat tube angle(62.7~76.4˚). The range of frame size control for developed electric riding machine did not have difference compared to traditional commercial systems, but quantitative and precise control with 0.1 mm length and 0.1°angle was possible through digital measurement. Unlike traditional commercial systems, frame size control was possible during riding through motor driven method, thus fitting duration decreased. It is necessary for further improvement to have feedback from users. It is believed that developed electric riding machine can help to develop domestic fitting system.

Journal of the Society of Naval Architects of Korea, 2008

The design process becomes more difficult due to the increasing complexity of products. Thus, without any proper design experience, designer cannot handle his design problems systematically. Besides, the conventional optimal design method cannot be used effectively at the early design stage, since most design problems must be formulated in terms of objective and constraint functions based on the mathematical concepts of Operation Research. Thus, in this paper, new design concept based on FBS (Function-Behavior-Structure) design model is introduced to help the novice designer formulate the complex design problems systematically into a mathematical form. In this FBS model, function means the designer's new intents designer wants to create for, structure stand for a final product configuration and behaviour is a product's performance. FBS design model is thus rather totally different concept used for formulating design problem, compared with conventional optimal design method. To validate this new FBS model, 330K VLCC design case is performed, and we found, though it is one design example case, that this new design concept could be effectively used for future ship design problems since, during the formulating design problem, the only engineering terminology such as function, structure, and behaviour of design product is used based on the engineering concepts, instead of mathematical terminology such as objective and constraints.

Journal of the Korea Academia-Industrial cooperation Society, 2011

The core of IT products, electronic components, especially the MLCC, chip inductors, chip Varistors and so on. In order to test the electrical characteristics of the chip using the Reno-pin contact test method has been used. In current chips, mass production of semiconductor manufacturing processes, high-speed production test for the chip speed up, precision is required. But Vibration displacement is a very short, so in order to overcome these shortcomings, the displacement amplification to design the structure has been actively studied. In this paper, a building structure with a flexible hinge was designed amplification instrument, semiconductor chip industry in the performance test and inspection equipment to measure the electrical characteristics of high speed linear actuators Reno-Pin using system was developed.

Transactions of the Korean Society of Automotive Engineers, 2016

This paper discusses about analyzing in-wheel vehicle's dynamic motion and load torque. Since in-wheel vehicle controls each left and right driving wheels, it is dangerous if vehicle's wheels are not in a cooperative control. First, this study builds the main wheel control logic using PID control theory and evaluates the stability. Using Carsim-Matlab/Simulink, vehicle dynamic motion is simulated in virtual 3D driving road. Through this, in-wheel vehicle's driving performance can be analyzed. The target vehicle is a rear-wheel drive in D-class sedan. Second, by using the first In-wheel vehicle's performance results, it derivate the drive motor's dynamic load torque for applying the dynamometer. Extracted load torque impute to dynamometer's load motor, linear experiment in dynamometer can replicated the 3-D road driving status. Also it, will be able to evaluate the more accurate performance analysis and stability, as a previous step of actual vehicle experiment.

Journal of the Korea Society of Systems Engineering, 2013

The aim of this study is to propose the design process suitable for developing the cognitive interface considering system engineering process (SEP) models. Due to the cognitive workload in an operation of HMS, some cognitive interfaces have been developed. It is somehow difficult to use the developed cognitive interface in real working environment since they often showed a conflict to stereotyped interface. So it is necessary to develop the design process suitable for the more operator-specific interface. Various SEP models were reviewed for selecting the suitable design process which might resolve the problem from design-specific interface. The suitable process for designing cognitive interface was proposed considering currently usable SEP models. The findings from the study may be helpful for systematic approach to designing cognitive interface in digitalized environment. The proposed design process would be applied for easily employing the cognitive interface in digitalized working environment such as main control room in nuclear power plant.

Journal of the Korean Society of Marine Engineering, 2008