Complex Fluids Based on Methacrylated Hyaluronic Acid

Journal of Biomedical Materials Research Part A, 2014

Viscosupplements, used for treating joint and cartilage diseases, restore the rheological properties of synovial fluid, regulate joint homeostasis and act as scaffolds for cell growth and tissue regeneration. Most viscosupplements are hydrogels composed of hyaluronic acid (HA) microparticles suspended in fluid HA. These microparticles are crosslinked with chemicals to assure their stability against enzyme degradation and to prolong the action of the viscosupplement. However, the crosslinking also modifies the mechanical, swelling and rheological properties of the HA microparticle hydrogels, with consequences on the effectiveness of the application. The aim of this study is to correlate the crosslinking degree (CD) with these properties to achieve modulation of HA/DVS microparticles through CD control. Because divinyl sulfone (DVS) is the usual crosslinker of HA in visco-supplements, we examined the effects of CD by preparing HA microparticles at 1:1, 2:1, 3:1, and 5:1 HA/DVS mass ratios. The CD was calculated from inductively coupled plasma spectrometry data. HA microparticles were previously sized to a mean diameter of 87.5 mm. Higher CD increased the viscoelasticity and the extrusion force and reduced the swelling of the HA microparticle hydrogels, which also showed Newtonian pseudoplastic behavior and were classified as covalent weak. The hydrogels were not cytotoxic to fibroblasts according to an MTT (3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyltetrazolium bromide) assay. V C 2014 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 00A:000-000, 2014.

Journal of Biomedical Materials Research Part B: Applied Biomaterials, 2013

Hyaluronic acid (HA) is a naturally occurring biodegradable polymer with a variety of applications in medicine. The use of HA as a filler or scaffold for regenerating tissues often requires improving the elastic properties of HA. This is conventionally accomplished via chemical crosslinking, which might require the generation of toxic free radicals. Although the mechanical properties of the resulting gel material can be tuned, these types of materials are static and susceptible to mechanical failure. The aim of this study was to develop a colloidal system for scaffold fabrication that is held together by physical interactions between HA nanoparticles. HA nanoparticles composed of 17 kDa HA suspended in water at different concentrations (15%, 30%, and 45% w/v, respectively) formed a stable threedimensional (3D) colloidal gel as a result of physical entanglement of free polymer chains on the surfaces of nanoparticles. The swelling ratio, shear moduli (G), compressive failure properties, and viscosity of colloidal gels were concentration dependent. The colloidal gels also were found to exhibit dynamic and recoverable properties, thus suggesting that these "self-associating colloids" offer characteristics distinct arising from crosslinked polymers or high concentration colloids. V

Journal of colloid and interface science, 2018

Macroscopic hydrogels are commonly used as injectable scaffolds or fillers, however they may easily obstruct blood vessels, which poses risks and limits their clinical use. In the present study, three types of hyaluronic acid (HA)-based hydrogel micro-particles with non-covalent, covalent semi-interpenetrating and conventional 3D molecular networks, have been designed, fabricated and characterized. The micro-particles are spherical, biconcave or irregular in shape and their diameter ranged between 2.5 and 3.5 µm; their suspensions exhibit a tuneable viscosity, shear-thinning behaviour, dynamic stability and dispersity in microfluidic flow as a result of their specific particulate nature, providing thus a well-controlled injectable platform. Hydrogel particle suspensions also demonstrate an enhanced safety profile, in terms of the dispersity, cell safety, and hemocompatibility. In addition, Rhodamine 6G has successfully been loaded and released from the particles as a model for drug ...

Carbohydrate Polymers, 2018

Here, we report synthesis of a terpolymeric covalently crosslinked hydrogel of hyaluronate (HA) as biomaterial with elasticity, mechanical properties and cell interactions via conventional free radical polymerization technique. To provide elasticity and mechanical properties, 2-hydroxyethyl acrylate (HEA) was grafted in HA, while to tune cellular interactions, gelatin methacryloyl (GM) was used as crosslinker. The composition and probable structure of the terpolymer (HA-g-pHEA-x-GM) were analysed by FTIR, 1 H HR-MAS-NMR, and TGA analyses. The SEM and texture analyses of hydrogel showed interconnected micro-porous network and high mechanical properties, respectively. In vitro biocompatibility was studied against human chondrocytes, whereas, in vivo biocompatibility and tissue regeneration were confirmed using mouse model. The hydrogel releases model protein-bovine serum albumin, and corticosteroid drug-dexamethasone in a sustain way at pH 7.4 and 37°C. Overall, the tunable mechanical properties, micro-porous network, and cytocompatibility of the HA-g-pHEA-x-GM hydrogel highlights its potential applicability in cartilage tissue engineering and drug delivery.

Biomacromolecules, 2013

Biomimetic hybrid hydrogels have generated broad interest in tissue engineering and regenerative medicine. Hyaluronic acid (HA) and gelatin (hydrolyzed collagen) are naturally derived polymers and biodegradable under physiological conditions. Moreover, collagen and HA are major components of the extracellular matrix (ECM) in most of the tissues (e.g. cardiovascular, cartilage, neural). When used as a hybrid material, HA-gelatin hydrogels may enable mimicking the ECM of native tissues. Although HA-gelatin hybrid hydrogels are promising biomimetic substrates, their material properties have not been thoroughly characterized in the literature. Herein, we generated hybrid hydrogels with tunable physical and biological properties by using different concentrations of HA and gelatin. The physical properties of the fabricated hydrogels including swelling ratio, degradation, and mechanical properties were investigated. In addition, in vitro cellular responses in both two and three dimensional (2D and 3D) culture conditions were assessed. It was found that the addition of gelatin methacrylate (GelMA) into HA methacrylate (HAMA) promoted cell spreading in the hybrid hydogels. Moreover, the hybrid hydrogels showed significantly improved mechanical properties compared to their single component analogs. The HAMA-GelMA hydrogels exhibited remarkable tunability behavior and may be useful for cardiovascular tissue engineering applications.

Journal of Biomedical Materials Research Part A, 2012

Sensitive hydrogels attract interest due to their soft wet appearance and shape response to environmental variations. The synthesis and characterization of semi-interpenetrated hydrogels obtained by radical-induced polymerization of 2-ethyl-(2-pyrrolidone)methacrylate (EPM) in the presence of different concentrations of hyaluronic acid (HA) using N,N 0-methylene-bisacrylamide or triethylene glycol dimethacrylate as crosslinker, followed by freeze-drying, are described. Polymeric systems were characterized by NMR, FTIR, SEM, TGA, and DMA. PEPMHA hydrogels' mechanical properties and swelling were found to be intimately related to HA concentration and crosslinker. The swelling response was assessed for temperature and pH variation in order to study the behavior of the hydrogels. We found that the presence of HA in PEPM polymeric systems induced a sensitivity to pH variation rather than temperature. Finally, the biocompatibility profile of the hydrogels was evaluated, using mesenchymal stem cells. Cell adhesion and proliferation results revealed the non-cytotoxicity of the systems. We estimate that PEPMHA hydrogels can be used for applications in tissue engineering and for the controlled release of bioactive compounds. V

Journal of Colloid and Interface Science, 2007

pH-responsive microgels are crosslinked polymer particles that swell when the pH approaches the pK a of the ionic monomer incorporated within the particles. In recent work from our group it was demonstrated that the mechanical properties of degenerated intervertebral discs (IVDs) could be restored to normal values by injection of poly(EA/MAA/BDDA) (ethylacrylate, methacrylic acid and butanediol diacrylate) microgel dispersions [J.M. Saunders, T. Tong, C.L. Le Maitre, T.J. Freemont, B.R. Saunders, Soft Matter 3 (2007) 486]. In this work we report the pH dependent swelling and rheological properties of poly(MMA/MAA/EGDMA) (methylmethacrylate and ethyleneglycol dimethacrylate) microgel dispersions. This system was investigated because it contains monomers that are already used as biomaterials. The poly(MMA/MAA/EGDMA) particles exhibit pH-triggered volume swelling ratios of up to ca. 250. The swelling onset for these particles occurs at pH values greater than ca. 6.0. A pK a for these particles of ca. 6.7 is consistent with titration and swelling data. Fluid-to-gel phase diagrams for concentrated poly(MMA/MAA/EGDMA) dispersions were determined as a function of polymer volume fraction and pH using tube-inversion measurements. The rheological properties for the gelled microgel dispersions were investigated using dynamic rheology measurements. The elastic modulus data for the poly(MMA/MAA/EGDMA) gelled dispersions were compared to data for poly(EA/MAA/BDDA) microgels. A similar pH-dependence for the elastic modulus was apparent. The maximum elastic modulus was achieved at a pH of about 7.0. The elastic modulus is an exponentially increasing function of polymer volume fraction at pH 7.0. Preliminary cell challenge experimental data are reported that indicate that gelled poly(MMA/MAA/EGDMA) microgel dispersions are biocompatible with cells from human intervertebral discs. However, the duration over which these experiments could be performed was limited by gradual redispersion of the gelled microgel dispersions. Based on the results presented it is suggested that poly(MMA/MAA/EGDMA) microgel would be a good candidate as a biomaterial for structural support of soft connective tissues. (B.R. Saunders). degenerated intervertebral discs (IVDs) could be restored by injection of poly(EA/MAA/BDDA) microgel dispersion followed by pH triggered swelling. (EA, MAA and BDDA are ethylacrylate, methacrylic acid and butanediol diacrylate, respectively.) Poly(EA/MAA/BDDA) microgel was originally developed by Rodriguez et al. [5] In this study we replaced EA and BDDA with components which should be more acceptable for potential use in the body. The comonomers chosen were MMA and EGDMA, which are methylmethacrylate and ethyleneglycol dimethacrylate, respectively. The aims of this study were to investigate the pH-dependent swelling behaviour of two poly(MMA/MAA/EGDMA) microgels and compare the data with those for poly(EA/MAA/BDDA) microgel to determine

Macromolecular Bioscience, 2009

Hydrogels that mimic the natural extracellular matrix (ECM) are used in three-dimensional cell culture, cell therapy, and tissue engineering. A semi-synthetic ECM based on cross-linked hyaluronana offers experimental control of both composition and gel stiffness. The mechanical properties of the ECM in part determine the ultimate cell phenotype. We now describe a rheological study of synthetic ECM hydrogels with storage shear moduli that span three orders of magnitude, from 11 to 3 500 Pa, a range important for engineering of soft tissues. The concentration of the chemically modified HA and the cross-linking density were the main determinants of gel stiffness. Increase in the ratio of thiol-modified gelatin reduced gel stiffness by diluting the effective concentration of the HA component.

Hyaluronic acid (HA) is widely used in the design of engineered hydrogels, due to its biofunctionality, as well as numerous sites for modification with reactive groups. There are now widespread examples of modified HA macromers that form either covalent or physical hydrogels through crosslinking reactions such as with click chemistry or supramolecular assemblies of guest-host pairs. HA hydrogels range from relatively static matrices to those that exhibit spatiotemporally dynamic properties through external triggers like light. Such hydrogels are being explored for the culture of cells in vitro, as carriers for cells in vivo, or to deliver therapeutics, including in an environmentally responsive manner. The future will bring new examples of HA hydrogels due to the synthetic diversity of HA.

International Journal of Biological Macromolecules, 2018

We report a facile methodology for the synthesis of inorganic-organic hydrogels based on integrative assembly aminopropyl magnesium phyllosilicate (aminoclay) and sodium salt of hyaluronic acid. The viscoelastic materials produced by electrostatic interactions and crosslinking of hyaluronan in the presence of exfoliated synthetic organoclay results in the formation of gel-like behavior retaining a high amount of water. This was confirmed by a rheological study revealing significant dominance of the elastic response over the entire deformation frequency range used. The mechanical strength of the aminoclay-hyaluronan hydrogels was found to be higher than that for related materials based on poly(vinylpyrrolidone)-aminoclay hydrogels.