Indian payloads (RT-2 experiment) onboard CORONAS-PHOTON mission

Experimental Astronomy, 2011

Phoswich detectors (RT-2/S & RT-2/G) are major scientific payloads of the RT-2 Experiment onboard the CORONAS-PHOTON mission, which was launched into a polar Low Earth Orbit of around 550 km on 2009 January 30. These RT-2 instruments are designed and developed to observe solar flares in hard X-rays and to understand the energy transport processes associated with these flares. Apart from this, these instruments are capable of observing Gamma Ray Bursts (GRBs) and Cosmic diffuse X-ray background (CDXRB). Both detectors consist of identical NaI(Tl) and CsI(Na) scintillation crystals in a Phoswich combination, having the same diameter (116 mm) but different thicknesses. The normal working energy range is from 15 keV to 150 keV, but may be extendable up to ~1 MeV. In this paper, we present the RT-2/S and RT-2/G instruments and discuss their testing and calibration results. We used different radio-active sources to calibrate both detectors. The radio-active source 57Co (122 keV) is used for onboard calibration of both instruments. During its lifetime (∼3–5 years), RT-2 is expected to cover the peak of the 24th solar cycle.

Experimental Astronomy, 2011

Cadmium Zinc Telluride (CZT) detectors are high sensitivity and high resolution devices for hard X-ray imaging and spectroscopic studies. The new series of CZT detector modules (OMS40G256) manufactured by Orbotech Medical Solutions (OMS), Israel, are used in the RT-2/CZT payload onboard the CORONAS-PHOTON satellite. The CZT detectors, sensitive in the energy range of 20 to 150 keV, are used to image solar flares in hard X-rays. Since these modules are essentially manufactured for commercial applications, we have carried out a series of comprehensive tests on these modules so that they can be confidently used in space-borne systems. These tests lead us to select the best three pieces of the ‘Gold’ modules for the RT-2/CZT payload. This paper presents the characterization of CZT modules and the criteria followed for selecting the ones for the RT-2/CZT payload. The RT-2/CZT payload carries, along with three CZT modules, a high spatial resolution CMOS detector for high resolution imaging of transient X-ray events. Therefore, we discuss the characterization of the CMOS detector as well.

Experimental Astronomy, 2011

The onboard software and data communication in the RT-2 Experiment onboard the Coronas–Photon satellite is organized in a hierarchical way to effectively handle and communicate asynchronous data generated by the X-ray detectors. A flexible data handling system is organized in the X-ray detector packages themselves and the processing electronic device, namely RT-2/E, has the necessary intelligence to communicate with the three scientific payloads by issuing commands and receiving data. It has direct interfacing with the Satellite systems and issues commands to the detectors and processes the detector data before sending to the satellite systems. The onboard software is configured with several novel features like (a) device independent communication scheme, (b) loss-less data compression and (c) Digital Signal Processor. Functionality of the onboard software along with the data structure, command structure, complex processing scheme etc. are discussed in this paper.

Experimental Astronomy, 2011

Imaging in hard X-rays of any astrophysical source with high angular resolution is a challenging job. Shadow-casting technique is one of the most viable options for imaging in hard X-rays. We have used two different types of shadow-casters, namely, Coded Aperture Mask (CAM) and Fresnel Zone Plate (FZP) pair and two types of pixellated solid-state detectors, namely, CZT and CMOS in RT-2/CZT payload, the hard X-ray imaging instrument onboard the CORONAS-PHOTON satellite. In this paper, we present the results of simulations with different combinations of coders (CAM & FZP) and detectors that are employed in the RT-2/CZT payload. We discuss the possibility of detecting transient Solar flares with good angular resolution for various combinations. Simulated results are compared with laboratory experiments to verify the consistency of the designed configuration.

Solar System Research, 2012

A joint analysis is carried out of data obtained with the help of the solar X ray SphinX spectropho tometer and the electron and proton satellite telescope STEP F in May 2009 in the course of the scientific space experiment CORONAS PHOTON. In order to determine the energies and particle types, in the anal ysis of spectrophotometer records data are used on the intensities of electrons, protons, and secondary γ radi ation, obtained by the STEP F telescope, which was located in close proximity to the SphinX spectropho tometer. The identical reaction of both instruments is noted at the intersection of regions of the Brazilian magnetic anomaly and the Earth's radiation belts. It is shown that large area photodiodes, serving as sensors of the X ray spectrometer, reliably record electron fluxes of low and intermediate energies, as well as fluxes of the secondary gamma radiation from construction materials of detector modules, the TESIS instrument complex, and the spacecraft itself. The dynamics of electron fluxes, recorded by the SphinX spectrophotom eter in the vicinity of a weak geomagnetic storm, supplements the information about the processes of radial diffusion of electrons, which was studied using the STEP F telescope.

galprop.stanford.edu

The operation of the "PENGUIN-M" device on board the "CORONAS-PHOTON" spacecraft during first months in orbit is described. Characteristics of the device are given as well as general description of software for experimental data processing and analysis. The progress of in-flight adjustment of the "PENGUIN-MD" detector unit in actual background conditions is described. Observation results are reported for soft X-ray solar flare emission and hard X-rays from cosmic gamma-ray bursts. The registered events were used for estimating the sensitivity of the device.

Advances in Space Research, 2011

The CORONAS-F mission experiments and results have been reviewed. The observations with the DIFOS multi-channel photometer in a broad spectral range from 350 to 1500 nm have revealed the dependence of the relative amplitudes of p-modes of the global solar oscillations on the wavelength that agrees perfectly well with the earlier data obtained in a narrower spectral ranges. The SPIRIT EUV observations have enabled the study of various manifestations of solar activity and high-temperature events on the Sun. The data from the X-ray spectrometer RESIK, gamma spectrometer HELICON, flare spectrometer IRIS, amplitude-temporal spectrometer AVS-F, and X-ray spectrometer RPS-1 have been used to analyze the X-and gamma-ray emission from solar flares and for diagnostics of the flaring plasma. The absolute and relative content of various elements (such as potassium, argon, and sulfur) of solar plasma in flares has been determined for the first time with the X-ray spectrometer RESIK. The Solar Cosmic Ray Complex monitored the solar flare effects in the Earth's environment. The UV emission variations recorded during solar flares in the vicinity of the 120-nm wavelength have been analyzed and the amplitude of relative variations has been determined.

Solar Physics, 2005

The first space-borne solar astronomy experiment of India, namely “Solar X-ray Spectrometer (SOXS)”, was successfully launched on 08 May 2003 on board geostationary satellite GSAT-2 of India. The SOXS is composed of two independent payloads, viz. SOXS Low-Energy Detector (SLD) Payload and SOXS High-Energy Detector (SHD) Payload. The SOXS aims to study the full-disk integrated X-ray emission in the energy range from 4 keV to 10 MeV. In this paper we present the first report on the SLD instrumentation and its in-orbit performance. The SLD payload was designed and developed at the Physical Research Laboratory in collaboration with various centers of Indian Space Research Organisation (ISRO). The basic scientific aim of the SLD payload is to study solar flares in the energy range from 4 to 60 keV with high spectral and temporal resolution. To meet these requirements, the SLD payload employs state-of-the-art solid state detectors, the first time for a solar astronomy experiment, viz. Si PIN (4 –25 keV), and cadmium–zinc–telluride (4 –60 keV). With their superb high-energy resolution characteristics, SLD can observe iron and iron–nickel complex lines that are visible only during solar flares. In view of its 3.4∘ FOV, the detector package is mounted on a Sun Aspect System, for the first time, to get uninterrupted observations in a geostationary orbit. The SLD payload configuration, its in-flight operation, and the response of the detectors are presented. We also present the first observations of solar flares made by the SLD payload and briefly describe their temporal and spectral mode results.

Bulletin of the Russian Academy of Sciences: Physics, 2011

Bulletin of the Russian Academy of Sciences: Physics, 2009

We describe the main parameters of the PENGUIN-MD detector unit of the PENGUIN-M instrument designed to measure the degree of linear polarization of X-ray radiation from solar flares in the energy range 20-150 keV and the X-ray spectra of solar flares in the energy range 2-500 keV. The method for measuring the X-ray polarization employed in the PENGUIN-MD unit is based on registration of coincidences in an active scatterer and scattered-radiation detectors. This method makes it possible to substantially reduce the background and to increase the sensitivity and reliability of the measurements.