Short time investigation of the neurospora kinesin step
Giovanni Cappello2006, Journal of Physics: Condensed Matter
Sign up for access to the world's latest research
checkGet notified about relevant papers
checkSave papers to use in your research
checkJoin the discussion with peers
checkTrack your impact
Abstract
The kinesin is a dimeric molecular motor, which processively moves along Q.1 the microtubule in a sequence of 8 nm steps. The stepping dynamics needs to Q.2 be clarified: there are controversial reports about the existence of substructures in the mechanical step and the step timescale. We present observations of the kinesin steps in the absence of external forces, measured with subnanometre precision and microsecond time resolution using a technique which we have recently introduced and named travelling wave tracking. The data suggest that, at zero load, the 8 nm step occurs in less than 30 µs and without any long mechanical substeps.
Related papers
Measuring Microtubule Supertwist and Defects by Three-Dimensional-Force-Clamp Tracking of Single Kinesin-1 Motors
Nano letters, 2018
Three-dimensional (3D) nanometer tracking of single biomolecules provides important information about their biological function. However, existing microscopy approaches often have only limited spatial or temporal precision and do not allow the application of defined loads. Here, we developed and applied a high-precision 3D-optical-tweezers force clamp to track in vitro the 3D motion of single kinesin-1 motor proteins along microtubules. To provide the motors with unimpeded access to the whole microtubule lattice, we mounted the microtubules on topographic surface features generated by UV-nanoimprint lithography. Because kinesin-1 motors processively move along individual protofilaments, we could determine the number of protofilaments the microtubules were composed of by measuring the helical pitches of motor movement on supertwisted microtubules. Moreover, we were able to identify defects in microtubules, most likely arising from local changes in the protofilament number. While it i...
Microtubule dynamics and the role of molecular motors in Neurospora crassa
Fungal Genetics and …, 2008
Live-cell imaging methods were used to study microtubule dynamics in the apical regions of leading hyphae and germ tubes of Neurospora crassa expressing b-tubulin-GFP. Microtubule polymerization rates in hyphae of N. crassa were much faster than those previously reported in any other eukaryotic organism. In order to address the roles of motor proteins in microtubule dynamic instability in N. crassa, the microtubule-motor mutant strains, Dnkin and ro-1, were examined. Polymerization and depolymerization rates in leading hyphae of these strains were reduced by one half relative to the wild type. Furthermore, microtubules in germ tubes of wild type and microtubule-motor mutants exhibited similar dynamic characteristics as those in hyphae of mutant strains. Small microtubule fragments exhibiting anterograde and retrograde motility were present in leading hyphae of all strains and germ tubes of wild-type strains. Our data suggest that microtubule motors play important roles in regulating microtubule dynamic instability in leading hyphae but not in germ tubes.
Fluctuation in the microtubule sliding movement driven by kinesin in vitro
Biophysical Journal, 1996
We studied the fluctuation in the translational sliding movement of microtubules driven by kinesin in a motility assay in vitro. By calculating the mean-square displacement deviation from the average as a function of time, we obtained motional diffusion coefficients for microtubules and analyzed the dependence of the coefficients on microtubule length. Our analyses suggest that 1) the motional diffusion coefficient consists of the sum of two terms, one that is proportional to the inverse of the microtubule length (as the longitudinal diffusion coefficient of a filament in Brownian movement is) and another that is independent of the length, and 2) the length-dependent term decreases with increasing kinesin concentration. This latter term almost vanishes within the length range we studied at high kinesin concentrations. From the length-dependence relationship, we evaluated the friction coefficient for sliding microtubules. This value is much larger than the solvent friction and thus consistent with protein friction. The length independence of the motional diffusion coefficient observed at sufficiently high kinesin concentrations indicates the presence of correlation in the sliding movement fluctuation. This places significant constraint on the possible mechanisms of the sliding movement generation by kinesin motors in vitro.
Direction and speed of microtubule movements driven by kinesin motors arranged on catchin thick filaments
Cell motility and the cytoskeleton, 2008
Conventional kinesin (Kinesin-1) is a microtubule-based molecular motor that supports intracellular vesicle/organelle transport in various eukaryotic cells. To arrange kinesin motors similarly to myosin motors on thick filaments in muscles, the motor domain of rat conventional kinesin (amino acid residues 1-430) fused to the C-terminal 829 amino acid residues of catchin (KHC430Cat) was bacterially expressed and attached to catchin filaments that can attach to and arrange myosin molecules in a bipolar manner on their surface. Unlike the case of myosin where actin filaments move toward the center much faster than in the opposite direction along the catchin filaments, microtubules moved at the same speed in both directions. In addition, many microtubules moved across the filaments at the same speed with various angles between the axes of the microtubule and catchin filament. Kinesin/catchin chimera proteins with a shorter kinesin neck domain were also prepared. Those without the whole ...
Dynamics and cooperativity of microtubule decoration by the motor protein kinesin
Journal of Molecular Biology, 2001
We describe a theoretical and experimental analysis of the interaction between microtubules and dimeric motor proteins (kinesin, NCD), with special emphasis on the stoichiometry of the interaction, cooperative effects, and their consequences for the interpretation of biochemical and image reconstruction results. Monomeric motors can bind equivalently to microtubules without interference, at a stoichiometry of one motor head per tubulin subunit (ab-heterodimer). By contrast, dimeric motors can interact with stoichiometries ranging between one and two heads per tubulin subunit, depending on binding constants of the ®rst head and the subsequent binding of the second head, and the concentration of dimers in solution. Further, we show that an attractive interaction between the bound motor molecules can explain the higher periodicities observed in decorated microtubules (e.g. 16 nm periodicity), and the nonuniform decoration of a population of microtubules and give an estimate of the strength of this interaction.
The kinesin-5 tail domain directly modulates the mechanochemical cycle of the motor domain for anti-parallel microtubule sliding
eLife
Kinesin-5 motors organize mitotic spindles by sliding apart microtubules. They are homotetramers with dimeric motor and tail domains at both ends of a bipolar minifilament. Here, we describe a regulatory mechanism involving direct binding between tail and motor domains and its fundamental role in microtubule sliding. Kinesin-5 tails decrease microtubule-stimulated ATP-hydrolysis by specifically engaging motor domains in the nucleotide-free or ADP states. Cryo-EM reveals that tail binding stabilizes an open motor domain ATP-active site. Full-length motors undergo slow motility and cluster together along microtubules, while tail-deleted motors exhibit rapid motility without clustering. The tail is critical for motors to zipper together two microtubules by generating substantial sliding forces. The tail is essential for mitotic spindle localization, which becomes severely reduced in tail-deleted motors. Our studies suggest a revised microtubule-sliding model, in which kinesin-5 tails s...
Stepping and Stretching. HOW KINESIN USES INTERNAL STRAIN TO WALK PROCESSIVELY
Journal of Biological Chemistry, 2003
The ability of kinesin to travel long distances on its microtubule track without dissociating has led to a variety of models to explain how this remarkable degree of processivity is maintained. All of these require that the two motor domains remain enzymatically "out of phase," a behavior that would ensure that, at any given time, one motor is strongly attached to the microtubule. The maintenance of this coordination over many mechanochemical cycles has never been explained, because key steps in the cycle could not be directly observed. We have addressed this issue by applying several novel spectroscopic approaches to monitor motor dissociation, phosphate release, and nucleotide binding during processive movement by a dimeric kinesin construct. Our data argue that the major effect of the internal strain generated when both motor domains of kinesin bind the microtubule is to block ATP from binding to the leading motor. This effect guarantees the two motor domains remain out of phase for many mechanochemical cycles and provides an efficient and adaptable mechanism for the maintenance of processive movement.
Processive movement of single kinesins on crowded microtubules visualized using quantum dots
The EMBO Journal, 2006
Kinesin-1 is a processive molecular motor transporting cargo along microtubules. Inside cells, several motors and microtubule-associated proteins compete for binding to microtubules. Therefore, the question arises how processive movement of kinesin-1 is affected by crowding on the microtubule. Here we use total internal reflection fluorescence microscopy to image in vitro the runs of single quantum dot-labelled kinesins on crowded microtubules under steady-state conditions and to measure the degree of crowding on a microtubule at steady-state. We find that the runs of kinesins are little affected by high kinesin densities on a microtubule. However, the presence of high densities of a mutant kinesin that is not able to step efficiently reduces the average speed of wild-type kinesin, while hardly changing its processivity. This indicates that kinesin waits in a strongly bound state on the microtubule when encountering an obstacle until the obstacle unbinds and frees the binding site for kinesin's next step. A simple kinetic model can explain quantitatively the behaviour of kinesin under both crowding conditions.
Detection of fractional steps in cargo movement by the collective operation of kinesin-1 motors
Proceedings of the National Academy of Sciences, 2007
The stepping behavior of single kinesin-1 motor proteins has been studied in great detail. However, in cells, these motors often do not work alone but rather function in small groups when they transport cellular cargo. Until now, the cooperative interactions between motors in such groups were poorly understood. A fundamental question is whether two or more motors that move the same cargo step in synchrony, producing the same step size as a single motor, or whether the step size of the cargo movement varies. To answer this question, we performed in vitro gliding motility assays, where microtubules coated with quantum dots were driven over a glass surface by a known number of kinesin-1 motors. The motion of individual microtubules was then tracked with nanometer precision. In the case of transport by two kinesin-1 motors, we found successive 4-nm steps, corresponding to half the step size of a single motor. Dwell-time analysis did not reveal any coordination, in the sense of alternate stepping, between the motors. When three motors interacted in collective transport, we identified distinct forward and backward jumps on the order of 10 nm. The existence of the fractional steps as well as the distinct jumps illustrate a lack of synchronization and has implications for the analysis of motor-driven organelle movement investigated in vivo.
Mechanical Properties of Organelles Driven by Microtubule-Dependent Molecular Motors in Living Cells
PLoS ONE, 2011
The organization of the cytoplasm is regulated by molecular motors which transport organelles and other cargoes along cytoskeleton tracks. Melanophores have pigment organelles or melanosomes that move along microtubules toward their minus and plus end by the action of cytoplasmic dynein and kinesin-2, respectively. In this work, we used single particle tracking to characterize the mechanical properties of motor-driven organelles during transport along microtubules. We tracked organelles with high temporal and spatial resolutions and characterized their dynamics perpendicular to the cytoskeleton track. The quantitative analysis of these data showed that the dynamics is due to a spring-like interaction between melanosomes and microtubules in a viscoelastic microenvironment. A model based on a generalized Langevin equation explained these observations and predicted that the stiffness measured for the motor complex acting as a linker between organelles and microtubules is , one order smaller than that determined for motor proteins in vitro. This result suggests that other biomolecules involved in the interaction between motors and organelles contribute to the mechanical properties of the motor complex. We hypothesise that the high flexibility observed for the motor linker may be required to improve the efficiency of the transport driven by multiple copies of motor molecules. Citation: Bruno L, Salierno M, Wetzler DE, Despó sito MA, Levi V (2011) Mechanical Properties of Organelles Driven by Microtubule-Dependent Molecular Motors in Living Cells. PLoS ONE 6(4): e18332.
Related topics
Related papers
Structure and dynamics of motor-driven microtubule bundles
arXiv (Cornell University), 2022
Nonlinear Model of Microtubule Dynamics and Its Impact on Kinesin Motion
2006 25th International Conference on Microelectronics
In this paper we elaborate the nonlinear model based on ferroelectric properties of microtubules (MTs) and triggered by hydrolysis of GTP (guanosine triphosphate) followed by conversion of chemical energy into large conformational rotation of corresponding tubulin dimer. We attempted to elucidate some functional properties of microtubules pertaining kinesin motor protein on the basis of this elegant model.
Kinesin Moves by an Asymmetric Hand-Over-Hand Mechanism
Science, 2003
Kinesin is a double-headed motor protein that moves along microtubules in 8-nanometer steps. Two broad classes of model have been invoked to explain kinesin movement: hand-over-hand and inchworm. In hand-over-hand models, the heads exchange leading and trailing roles with every step, whereas no such exchange is postulated for inchworm models, where one head always leads. By measuring the stepwise motion of individual enzymes, we find that some kinesin molecules exhibit a marked alternation in the dwell times between sequential steps, causing these motors to "limp" along the microtubule. Limping implies that kinesin molecules strictly alternate between two different conformations as they step, indicative of an asymmetric, hand-over-hand mechanism.
Diffusive Movement of Processive Kinesin-1 on Microtubules
Traffic, 2009
The processive motor kinesin-1 moves unidirectionally toward the plus end of microtubules. This process can be visualized by total internal reflection fluorescence (TIRF) microscopy of kinesin bound to a carboxylated Quantum dot (Qdot), which acts both as cargo and label. Surprisingly, when kinesin is bound to an anti-HIS Qdot, it shows diffusive movement on microtubules, which decreased in favor of processive runs with increasing salt concentration. This observation implies that kinesin movement on microtubules is governed by its conformation, as it is well-established that kinesin undergoes a salt-dependent transition from a folded (inactive) to an extended (active) molecule. A truncated kinesin lacking the last 75 amino acids (kinesin-ΔC) showed both processive and diffusive movement on microtubules. The extent of each behavior depends on the relative amounts of ADP and ATP, with purely diffusive movement occurring in ADP alone. Taken together, these data imply that folded kinesin.ADP can exist in a state that diffuses along the microtubule lattice without expending energy. This mechanism may facilitate the ability of kinesin to pick up cargo, and/or allow the kinesin/cargo complex to stay bound after encountering obstacles.
Rectified Brownian motion and kinesin motion along microtubules
Physical Review E, 2001
The mechanism of rectified Brownian movement is used to analyze measured data for kinesin motion along microtubules. A key component of the mechanism is the diffusive movement of the microtubule binding heads of kinesin during the adenosine triphosphate ͑ATP͒ cycle. The first-passage time distribution for this step is analyzed in detail and is shown to be responsible for observed load-velocity profiles. The ATPase activity of the kinesin heads is that of a nucleotide switch and not that of a direct chemomechanical energy converter. Experimental data acquisition, rate constants, and alternative explanations are discussed. The mechanism described in this paper is fundamental to the nanobiology of intracellular processes.
Kinesin motion in the absence of external forces characterized by interference total internal reflection microscopy
Physical review. E, Statistical, nonlinear, and soft matter physics, 2003
We study the motion of the kinesin molecular motor along microtubules using interference total internal reflection microscopy. This technique achieves nanometer scale resolution together with a fast time response. We describe the first in vitro observation of kinesin stepping at high ATP concentration in the absence of an external load, where the 8-nm step can be clearly distinguished. The short-time resolution allows us to measure the time constant related to the relative motion of the bead-motor connection; we deduce the associated bead-motor elastic modulus.
Studying Kinesin Motors by Optical 3D-Nanometry in Gliding Motility Assays
Methods in Cell Biology, 2010
Probing the kinesin reaction cycle with a 2D optical force clamp
Proceedings of The National Academy of Sciences, 2003
With every step it takes, the kinesin motor undergoes a mechanochemical reaction cycle that includes the hydrolysis of one ATP molecule, ADP͞Pi release, plus an unknown number of additional transitions. Kinesin velocity depends on both the magnitude and the direction of the applied load. Using specialized apparatus, we subjected single kinesin molecules to forces in differing directions. Sideways and forward loads up to 8 pN exert only a weak effect, whereas comparable forces applied in the backward direction lead to stall. This strong directional bias suggests that the primary working stroke is closely aligned with the microtubule axis. Sideways loads slow the motor asymmetrically, but only at higher ATP levels, revealing the presence of additional, load-dependent transitions late in the cycle. Fluctuation analysis shows that the cycle contains at least four transitions, and confirms that hydrolysis remains tightly coupled to stepping. Together, our findings pose challenges for models of kinesin motion.
The Kinesin-5 Tail Domain Directly Modulates the Mechanochemical Cycle of the Motor for Anti-Parallel Microtubule Sliding
Kinesin-5 motors organize mitotic spindles by sliding apart anti-parallel microtubules. They are homotetramers composed of two antiparallel dimers placing orthogonal motor and tail domains at opposite ends of a bipolar minifilament. Here, we describe a regulatory mechanism, involving direct binding of the tail to motor domain and reveal its fundamental role in microtubule sliding motility. Biochemical analyses reveal that the tail down-regulates microtubule-activated ATP hydrolysis by specifically engaging the motor in the nucleotide-free or ADP-bound states. Cryo-EM structures reveal that the tail stabilizes a unique conformation of the motor N-terminal subdomain opening its active site. Full-length kinesin-5 motors undergo slow motility and cluster together along microtubules, while tail-deleted motors exhibit rapid motility without clustering along microtubules. The tail is critical for motors to zipper together two microtubules by generating substantial forces within sliding zon...
Visualisation of a Kinesin-13 Motor on Microtubule End Mimics
Journal of Molecular Biology, 2008
An expanding collection of proteins localises to microtubule ends to regulate cytoskeletal dynamics and architecture by unknown molecular mechanism(s). Electron microscopy is invaluable for studying microtubule structure, but because microtubule ends are heterogeneous, their structures are difficult to determine. We therefore investigated whether tubulin oligomers induced by the drug dolastatin could mimic microtubule ends. The microtubule end-dependent ATPase of kinesin-13 motors is coupled to microtubule depolymerisation. Significantly, kinesin-13 motor ATPase activity is stimulated by dolastatin-tubulin oligomers suggesting, first, that these oligomers share properties with microtubule ends and, second, that the physical presence of an end is less important than terminal tubulin flexibility for microtubule end recognition by the kinesin-13 motor. Using electron microscopy, we visualised the kinesin-13 motor-dolastatin-tubulin oligomer interaction in nucleotide states mimicking steps in the ATPase cycle. This enabled us to detect conformational changes that the motor undergoes during depolymerisation. Our data suggest that such tubulin oligomers can be used to examine other microtubule end-binding proteins.
Loading Preview
Sorry, preview is currently unavailable. You can download the paper by clicking the button above.