Papers by Jonathan H Tsui
Advanced Materials Interfaces, 2021
Circulation Research, 2021
Recent advancement of human induced pluripotent stem cell-derived cardiomyocyte (hiPSC-CM) techno... more Recent advancement of human induced pluripotent stem cell-derived cardiomyocyte (hiPSC-CM) technologies has opened the door to next-generation modeling of human cardiac biology and disease. Not only does this alleviate the need for human primary tissue and compensate for the well documented deficiencies of rodent models for cardiovascular disease, but these technologies may lead to the identification of better candidates for clinical development. Unfortunately, most current 2D hiPSC-CM models lack the biochemical, mechanical, and electrical feedback that cardiomyocytes endure in a multi-cellular aligned tissue, which limits their translatability into clinical settings. To address this, we incorporated hiPSC-CMs modeling various genetic dilated cardiomyopathies (DCM) into 3D engineered heart tissues (EHTs). Here, we show these models develop distinguishable contractile defects recapitulating hallmarks of DCM when compared to biologically relevant controls. Moreover, this distinct phe...
Advanced Materials Interfaces, 2021
In this paper, we report a simple and facile method to fabricate nanomolded Nafion thin films wit... more In this paper, we report a simple and facile method to fabricate nanomolded Nafion thin films with tunable mechanical, and electrical properties. To achieve this, we combine a novel thermal
Advanced Healthcare Materials, 2016
Nano Letters, 2014
Bacterial sepsis is a serious clinical condition that can lead to multiple organ dysfunction and ... more Bacterial sepsis is a serious clinical condition that can lead to multiple organ dysfunction and death despite timely treatment with antibiotics and fluid resuscitation. We have developed an approach to clearing bacteria and endotoxin from the bloodstream, using magnetic nanoparticles (MNPs) modified with bis-Zn-DPA, a synthetic ligand that binds to both Grampositive and Gram-negative bacteria. Magnetic microfluidic devices were used to remove MNPs bound to Escherichia coli, a Gram-negative bacterium commonly implicated in bacterial sepsis, from bovine whole blood at flows as high as 60 mL/h, resulting in almost 100% clearance. Such devices could be adapted to clear bacteria from septicemic patients.
ACS Nano, 2014
Current tissue engineering methods lack the ability to properly recreate scaffold-free, cell-dens... more Current tissue engineering methods lack the ability to properly recreate scaffold-free, cell-dense tissues with physiological structures. Recent studies have shown that the use of nanoscale cues allows for precise control over large-area 2D tissue structures without restricting cell growth or cell density. In this study, we developed a simple and versatile platform combining a thermoresponsive nanofabricated substratum (TNFS) incorporating nanotopographical cues and the gel casting method for the fabrication of scaffold-free 3D tissues. Our TNFS allows for the structural control of aligned cell monolayers which can be spontaneously detached via a change in culture temperature. Utilizing our gel casting method, viable, aligned cell sheets can be transferred without loss of anisotropy or stacked with control over individual layer orientations. Transferred cell sheets and individual cell layers within multilayered tissues robustly retain structural anisotropy, allowing for the fabrication of scaffold-free, 3D tissues with hierarchical control of overall tissue structure.
Microsystems & Nanoengineering
We report on a simple and efficient method for the selective positioning of Au/DNA hybrid nanocir... more We report on a simple and efficient method for the selective positioning of Au/DNA hybrid nanocircuits using a sequential combination of electron-beam lithography (EBL), plasma ashing, and a molecular patterning process. The nanostructures produced by the EBL and ashing process could be uniformly formed over a 12.6 in2 substrate with sub-10 nm patterning with good pattern fidelity. In addition, DNA molecules were immobilized on the selectively nanopatterned regions by alternating surface coating procedures of 3-(aminopropyl)triethoxysilane (APS) and diamond like carbon (DLC), followed by deposition of DNA molecules into a well-defined single DNA nanowire. These single DNA nanowires were used not only for fabricating Au/DNA hybrid nanowires by the conjugation of Au nanoparticles with DNA, but also for the formation of Au/DNA hybrid nanocircuits. These nanocircuits prepared from Au/DNA hybrid nanowires demonstrate conductivities of up to 4.3 × 105 S/m in stable electrical performance....
Human induced pluripotent stem cell-derived cardiomyocytes (hiPSC-CMs) offer tremendous potential... more Human induced pluripotent stem cell-derived cardiomyocytes (hiPSC-CMs) offer tremendous potential for use in engineering human tissues for regenerative therapy and drug screening. However, differentiated cardiomyocytes are phenotypically immature, reducing assay reliability when translating in vitro results to clinical studies and precluding hiPSC-derived cardiac tissues from therapeutic use in vivo. To address this, we have developed hybrid hydrogels comprised of decellularized porcine myocardial extracellular matrix (dECM) and reduced graphene oxide (rGO) to provide a more instructive microenvironment for proper cellular and tissue development. A tissue-specific protein profile was preserved post-decellularization, and through the modulation of rGO content and degree of reduction, the mechanical and electrical properties of the hydrogels could be tuned. Engineered heart tissues (EHTs) generated using dECM-rGO hydrogel scaffolds and hiPSC-derived cardiomyocytes exhibited significan...
Bio-sourced and biodegradable polymers for additive manufacturing could enable the rapid fabricat... more Bio-sourced and biodegradable polymers for additive manufacturing could enable the rapid fabrication of parts for a broad spectrum of applications ranging from healthcare to aerospace. However, a limited number of these materials are suitable for vat photopolymerization processes. Herein, we report a two-step additive manufacturing process to fabricate robust protein-based constructs using a commercially available laser-based SLA printer. Methacrylated bovine serum albumin (MA-BSA) was synthesized and formulated into aqueous resins that were used to print complex 3D objects with a resolution comparable to a commercially available resin. The MA-BSA resins were characterized by rheometry to determine the viscosity and the cure rate, as both of these parameters can ultimately be used to predict the printability of the resin. In the first step of patterning these materials, the MA-BSA resin was 3D printed, and in the second step, the printed construct was thermally cured to denature the...
ACS Nano
Intravenous regional anesthesia (IVRA; Bier block) is commonly used to anesthetize an extremity f... more Intravenous regional anesthesia (IVRA; Bier block) is commonly used to anesthetize an extremity for surgery. Limitations of the procedure include pain from the required tourniquet, the toxicity that can occur from systemic release of local anesthetics, and the lack of postoperative pain relief. We hypothesized that the nanoencapsulation of the local anesthetic would prolong local anesthesia and enhance safety. Here, we developed an ∼15 nm micellar bupivacaine formulation (M-Bup) and tested it in a rat tail vein IVRA model, in which active agents were restricted in the tail by a tourniquet for 15 min. After tourniquet removal, M-Bup provided local anesthesia for 4.5 h, which was two times longer than that from a larger dose of free bupivacaine. Approximately 100 nm liposomal bupivacaine (L-Bup) with the same drug dose as M-Bup did not cause anesthesia. Blood levels of bupivacaine after tourniquet removal were lower in animals receiving M-Bup than L-Bup or free bupivacaine, demonstrating enhanced safety. Tissue reaction to M-Bup was benign.
Journal of Materials Chemistry B
Imparting electroconductive and nanotopographical cues to biodegradable silk–fibroin films enhanc... more Imparting electroconductive and nanotopographical cues to biodegradable silk–fibroin films enhanced the maturation of cultured human stem cell-derived cardiomyocytes.
Progress in Polymer Science, 2016
Human tissues are sophisticated ensembles of many distinct cell types embedded in the complex, bu... more Human tissues are sophisticated ensembles of many distinct cell types embedded in the complex, but well-defined, structures of the extracellular matrix (ECM). Dynamic biochemical, physicochemical, and mechano-structural changes in the ECM define and regulate tissue-specific cell behaviors. To recapitulate this complex environment in vitro, dynamic polymer-based biomaterials have emerged as powerful tools to probe and direct active changes in cell function. The rapid evolution of polymerization chemistries, structural modulation, and processing technologies, as well as the incorporation of stimuli-responsiveness, now permit synthetic microenvironments to capture much of the dynamic complexity of native tissue. These platforms are comprised not only of natural polymers chemically and molecularly similar to ECM, but those fully synthetic in origin. Here, we review recent in vitro efforts to mimic the dynamic microenvironment comprising native tissue ECM from the viewpoint of material design. We also discuss how these dynamic polymer-based biomaterials are being used in fundamental cell mechanobiology studies, as well as towards efforts in tissue engineering and regenerative medicine.
ACS applied materials & interfaces, Aug 11, 2016
Understanding the phenotypic development of human induced pluripotent stem cell-derived cardiomyo... more Understanding the phenotypic development of human induced pluripotent stem cell-derived cardiomyocytes (hiPSC-CMs) is a prerequisite to advancing regenerative cardiac therapy, disease modeling, and drug screening applications. Lack of consistent hiPSC-CM in vitro data can be largely attributed to the inability of conventional culture methods to mimic the structural, biochemical, and mechanical aspects of the myocardial niche accurately. Here, we present a nanogrid culture array comprised of nanogrooved topographies, with groove widths ranging from 350 to 2000 nm, to study the effect of different nanoscale structures on the structural development of hiPSC-CMs in vitro. Nanotopographies were designed to have a biomimetic interface, based on observations of the oriented myocardial extracellular matrix (ECM) fibers found in vivo. Nanotopographic substrates were integrated with a self-assembling chimeric peptide containing the Arg-Gly-Asp (RGD) cell adhesion motif. Using this platform, c...
Nano Letters, 2012
Cell-biomaterial interactions can be controlled by modifying the surface chemistry or nanotopogra... more Cell-biomaterial interactions can be controlled by modifying the surface chemistry or nanotopography of the material, to induce cell proliferation and differentiation if desired. Here we combine both approaches in forming silk nanofibers (SNFs) containing gold nanoparticles (AuNPs) and subsequently chemically modifying the fibers. Silk fibroin mixed with gold seed nanoparticles was electrospun to form SNFs doped with gold seed nanoparticles (SNF(seed)). Following gold reduction, there was a 2-fold increase in particle diameter confirmed by the appearance of a strong absorption peak at 525 nm. AuNPs were dispersed throughout the AuNP-doped silk nanofibers (SNFs(Au)). The Young's modulus of the SNFs(Au) was almost 70% higher than that of SNFs. SNFs(Au) were modified with the arginine-glycine-aspartic acid (RGD) peptide. Human mesenchymal stem cells that were cultured on RGD-modified SNF(Au) had a more than 2-fold larger cell area compared to the cells cultured on bare SNFs; SNF(Au) also increased cell size. This approach may be used to alter the cell-material interface in tissue engineering and other applications.
Proceedings of the National Academy of Sciences, 2012
Aberrant neuronal activity in injured peripheral nerves is believed to be an important factor in ... more Aberrant neuronal activity in injured peripheral nerves is believed to be an important factor in the development of neuropathic pain. Pharmacological blockade of that activity has been shown to mitigate the onset of associated molecular events in the nervous system. However, results in preventing onset of pain behaviors by providing prolonged nerve blockade have been mixed. Furthermore, the experimental techniques used to date to provide that blockade were limited in clinical potential in that they would require surgical implantation. To address these issues, we have used liposomes (SDLs) containing saxitoxin (STX), a site 1 sodium channel blocker, and the glucocorticoid agonist dexamethasone to provide nerve blocks lasting ∼1 wk from a single injection. This formulation is easily injected percutaneously. Animals undergoing spared nerve injury (SNI) developed mechanical allodynia in 1 wk; nerve blockade with a single dose of SDLs (duration of block 6.9 ± 1.2 d) delayed the onset of allodynia by 2 d. Treatment with three sequential SDL injections resulting in a nerve block duration of 18.1 ± 3.4 d delayed the onset of allodynia by 1 mo. This very prolonged blockade decreased activation of astrocytes in the lumbar dorsal horn of the spinal cord due to SNI. Changes in expression of injury-related genes due to SNI in the dorsal root ganglia were not affected by SDLs. These findings suggest that formulations of this kind, which could be easy to apply clinically, can mitigate the development of neuropathic pain.
Advanced Healthcare Materials, 2015
Electrically conductive materials provide a suitable platform for the in vitro study of excitable... more Electrically conductive materials provide a suitable platform for the in vitro study of excitable cells, such as skeletal muscle cells, due to their inherent conductivity and electroactivity. Here it is demonstrated that bioinspired electroconductive nanopatterned substrates enhance myogenic differentiation and maturation. The topographical cues from the highly aligned collagen bundles that form the extracellular matrix of skeletal muscle tissue are mimicked using nanopatterns created with capillary force lithography. Electron beam deposition is then utilized to conformally coat nanopatterned substrates with a thin layer of either gold or titanium to create electroconductive substrates with well-defined, large-area nanotopographical features. C2C12 cells, a myoblast cell line, are cultured for 7 d on substrates and the effects of topography and electrical conductivity on cellular morphology and myogenic differentiation are assessed. It is found that biomimetic nanotopography enhances the formation of aligned myotubes and the addition of an electroconductive coating promotes myogenic differentiation and maturation, as indicated by the upregulation of myogenic regulatory factors Myf5, MyoD, and myogenin (MyoG). These results suggest the suitability of electroconductive nanopatterned substrates as a biomimetic platform for the in vitro engineering of skeletal muscle tissue.
Advanced Healthcare Materials, 2015
Electrically conductive materials provide a suitable platform for the in vitro study of excitable... more Electrically conductive materials provide a suitable platform for the in vitro study of excitable cells, such as skeletal muscle cells, due to their inherent conductivity and electroactivity. Here it is demonstrated that bioinspired electroconductive nanopatterned substrates enhance myogenic differentiation and maturation. The topographical cues from the highly aligned collagen bundles that form the extracellular matrix of skeletal muscle tissue are mimicked using nanopatterns created with capillary force lithography. Electron beam deposition is then utilized to conformally coat nanopatterned substrates with a thin layer of either gold or titanium to create electroconductive substrates with well-defined, large-area nanotopographical features. C2C12 cells, a myoblast cell line, are cultured for 7 d on substrates and the effects of topography and electrical conductivity on cellular morphology and myogenic differentiation are assessed. It is found that biomimetic nanotopography enhances the formation of aligned myotubes and the addition of an electroconductive coating promotes myogenic differentiation and maturation, as indicated by the upregulation of myogenic regulatory factors Myf5, MyoD, and myogenin (MyoG). These results suggest the suitability of electroconductive nanopatterned substrates as a biomimetic platform for the in vitro engineering of skeletal muscle tissue.
Uploads
Papers by Jonathan H Tsui