General

Couple of questions regardnig the new version:Why does date say November 2025 for the latest release: Download TimeXtender 20.10 – TimeXtender Support. A bit confusing. Is it the latest version, or is the latest version only available in customer portail? Here is says that V25 is TimeXtenders new focus for on-prem solution, but the lasted version on customer portail is 20.10.74.64. Where can v25 be downloaded from? If upgraded to the Time

At our client Heijmans, we're experiencing differences in mappings from the same table in the Ingest.We're on TDI 7208.1 and Prepare Instance oDataWareHouse version 3655Using a Salesforce source, we're using the table Object__c where we approximately have 400 fields available. At the moment, we only have about 350 ‘checked’ in the Ingest. However, when adding new fields (of the remaining 50), and transferring and synchronizing the project, the mapping doesn’t update. It's even possible to add the same table as a second source and then, the whole list becomes available. To give another example, the standard field [odx_timestamp] has been checked in the Ingest, but is only visible in the second mapping in the project.   

Hi,I have a question regarding history-enabled tables and slowly changing dimensions (SCDs). In my case, I have a specific store that recently changed its store name. In the transaction table, I want to keep the old store name for all transactions prior to 01.01.2023.The best solution is probably to introduce a history table with a Slowly Changing Dimension on the store dimension, right?Currently, my table is incremental, but once a week we perform a full load back to 2021 (a large amount of data). According to the article I read, I should add an additional join similar to the one shown in the picture below. However, in my experience, adding such lookups often makes the execution significantly slower.What do you think? Do you have any suggestions for a better approach, or is this perhaps already the best solution?I’m also wondering whether it would help to convert the trans

Hi,  I missed the webinar today as shown below. Is it possible to get the recording from this webinar?Data Trends & Challenges from FabCon Europe 2025: Practical Solutions with TimeXtender   Best regards,Michael Müller

We are suddenly having issues with opening last saved project in TimeXtender. The error says:An error occurred while fetching data from the database.Failed to enable constraints. One or more rows contain values violating non-null, unique, or foreign-key constraints.Location: Table: SelectionRuleFieldsForeignKeyConstraint DataFields_SelectionRuleFields requires the child key values (5b2c48b9-abad-4a3b-a9b2-002fedfc582a) to exist in the parent table..We have tried to go back to the project that we saved before the lastest one. We are able to open that it not able to save it. The errror says:An error occurred while saving the project to the database.An error occurred while fetching data from the database.Failed to enable constraints. One or more rows contain values violating non-null, unique, or foreign-key constraints.Location: Table: SelectionRuleFieldsForeignKeyConstraint

Hi all, Does anyone have experience with or managed to do a “dynamic” kind of flexi multi key join in TimeXteder? Example like this --- a.[BUYER_GROUP_CD], b.[BUYER_GROUP]FROM[DSA].[SYNAPSE_SILVER] aLEFT JOIN[DSA].[XLS_PURCHASING_GRP] b    ON a.[BUYERGRP] = b.[BUYER_GROUP] OR ON a.[BUYER_GROUP_DESC] = b.[BUYER_GROUP_ID] OR ON a.[BUYER = b.[BUYER_GROUP_WORKSPACE_ID]

Hi. Is it possible to move my current community account to my new e-mail address? I could not find anywhere to update this on my profile.

Hi!I have just installed TX 20.10.66.64 on a new server for a customer and following the steps of the “Configure Multiple Environments” article. Created a service account and setup the Windows Services through TimeXtender. Logged in on TimeXtender with the Service account for prod and linked it to the prod repository (which is on a different server). Now I'm trying to setup the production environment in TimeXtender. I opened Environment properties and clicked New Environment, gave it a name and filled in the address of the server (and instance) containing the prod repository. Filled in the ports. When clicking OK to close the Add Environment window I almost immediately get the error from the printscreen below:

Hi!I am currently investigating something for a customer of ours. They just switched their Telephony system to Teams Telephone  and want to use a dashboard in Power BI to show the current queue of callers. The data can be extracted from Teams Telephone by MS Graph API. This customer has a TimeXtender environment in production, so adding a new datasource (TimeXtender REST connection to the MS Graph API) will not be the hardest part.But, they want the dashboard to show (near) real-time data. Is it possible for TimeXtender to take in data, prepare it for the report and refresh the semantic layer within seconds and then start again?I am aware MS have created a plugin for Teams to show these numbers in a dashboard of their own in the application, but our customer would like to know if it is possible to create this in Power BI using TimeXtender. Kind regards, Richard

 Hi!A customer I am working for recently did an upgrade to TX Classic 20.10.66.64.After switching all data sources from ODX to Business Units not all datatypes are set correctly in TimeXtender. Especially the columns containing the datatype “time(7)”. When you check the fields in the new datasource the datatype for that field is shown as unknown, while sql recognizes the source as a “time(7)” field. We were able to resolve this with the overrule datatype option, but would like to have it investigated to check if this is desirable. TimeXtender:  SSMS: Datasource: Any Source ADO.netDataprovider: SQLClient Data Provider (.Ne

Hi Just installed TX 20.10.66.64 on a new server for a customer and connected to the server where the txrepository is kept, all without any problems. Now I need to setup the Prod environment and therefore start the service I created for that, but this keeps showing an error message:  From the application log of the server:  

Hi!A customer I am working for has been wanting to upgrade their TimeXtender version to the new V25 / Classic. According to this article: Important information regarding TimeXtender 20.10 (V20), TimeXtender Data Integration (TDI), and TimeXtender Classic (V25 / Classic) the release would be end of march. But until now there has been no update on this new version. Would it be possible to get an update on the release date so they can decide which version to upgrade to? 

is it possible, as the title says .. to Copy and entire semantic layer to a new semantic layer, or copy the exsisting tables with relations from 1 semantic layer to a new one ?

At one point you had a link to describe how to write a custom data source so it will show up in the list of Custom Data Sources in TX.  Can you link me to that documentation?

Hi, I have a virtual machine that is currently hosting the ODX service and I would like to get my local machine up and running with TX desktop.  I have installed the application but am getting an error that can be found below.  I have looked through the documentation regarding this but it seems that the legacy documenation is all I can find with anything relevant.  In the screen shots it is asking to review settings in the ODX tab and the Project repository tab which are non existent in the latest TX version I am using.  I only see General and Customer editors when looking at Tools>options. ERROR> A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: TCP Provider, error: 0 - The specified network name is no longer available.)Details:SQL Server: 'sql-instances-prod.database.windows.net'SQL Error Number: 64

In the TimeXtender Classic training, I only see 4 modules, while Peter Jensen (element61) sees 5 modules. See below screenshots. We are wondering why Peter has a module named ‘Business units’ that I don’t see.  

hi thereAfter the latest update executionengine_x64 and Jet datamanager server takes 100% of my cpu ..  are there anyone who have experienced the same ?

We're experiencing projects to open very slowly using TX 20.10.38 (we're above version 10000 of the project) Is there an easy way to remove old versions of a project ? We are using multi environment with global databases, and don't want to go through the export, create new repo DB and import hustle.We're also trying to delete the logs, but deleting them from within TX seems to take forever.

Good DayOne of our clients who use TimeXtender (20.10.47.64) experiences a Server Memory issue in Production when IT Operations opened the Multiple Environment Transfer Window. IT Operations reported that the window took ages to open but did eventually open. The Network Administrator did then have to hard reboot the server in order to get it to respond.Attached are the messages reported within TimeXtender. 

Hi,I am currently working in TimeXtender Data Integration (version 6766.1) and would like to view the relationships between my tables. However, when I access the “Relation Diagram,” I do not see any relationships—neither between tables across different data areas (e.g., DSA and MDW) nor between tables with lookup fields.Is there a specific setting I need to enable to view these relationships? The data lineage for specific fields is functioning perfectly.

Hi,I previously obtained my TimeXtender Solutions Architect certificate. How can I get the badge to show up in the community? Kind regards,Ludwig

Hi,Is there a way to view the data lineage for tables populated using the Custom Table Insert method? When we select the “Data Lineage” option for a column in a Custom Table Insert table, it only shows the data lineage with that table as the source, rather than displaying the tables used within the Custom Table Insert itself.I saw that this post had a similar question like mine, but I couldn't find an update about it: data lineage for custom table insert | CommunityThank you in advance!

Hi everyone, we're migrating from onprem to an azure SQL db. (version 6x).What would be the approach to migrate history tables? Can't find much on the forums that fits our usecase.

Hi all,our customer has tables that are SCD2 historized with valid_from and valid_to columns and a “version” column, where 1 is the most recent entry, 2 the next older entry and so on.Is there a possibility to load these tables into TimeXtender, preserve the history (make it useable for TimeXtender) and continue historizing in TimeXtender, so that they can turn off the historization in their source table?

Dear Sir,I am looking for a sql query on my local sql repository to create a list of all my datasources in my projects.I am using v20.10.45.Thanks in advance.Regards,Arthur