Gigabit internet still chokes Revit because Revit worksharing and cloud BIM depend on low latency, not raw bandwidth. When latency climbs above roughly 40 to 50 milliseconds to Autodesk cloud services, syncs slow and fail, and Wi-Fi, undersized firewalls, 1 Gbps server links, and CAD over VPN make it worse. Fix the latency path, wire production workstations, upgrade the storage backbone, and stream pixels instead of files. Rudick Innovation & Technology provides IT support for architecture firms and engineers that tunes networks for exactly these workloads.
Think of bandwidth as a 10-lane highway and latency as the potholes and stoplights on it. You can fit plenty of cars, but none of them move fast.
Why can’t a standard office network handle CAD and BIM?
Standard networks are built for bursty traffic such as web pages, email, and video, which tolerate small delays. Revit, Civil 3D, and Navisworks need a constant, chatty stream between the user and the server or cloud. Every model rotation or committed change exchanges hundreds of small packets.
When the network treats those packets like marketing email, you get:
- Packet loss: data disappears, which can corrupt files
- Jitter: uneven delays that make the cursor rubber band across the screen
- Sync failures: the server times out waiting for a response stuck in traffic
You cannot fix a physics problem by buying a bigger circuit. The network has to be engineered for high-performance engineering workflows.
How much latency can Revit tolerate?
Autodesk guidance for cloud collaboration such as BIM 360 and Autodesk Construction Cloud is to keep latency under about 40 to 50 milliseconds. Past 100 ms, packet loss increases and model syncs fail or corrupt. When engineers ask why worksharing keeps failing, latency is almost always the answer.
Buy for low latency, not just speed, and optimize routing so data takes the fewest hops to Autodesk servers.
Should design workstations use Wi-Fi?
Not for production work. Wi-Fi is half duplex, meaning it sends or receives but not both at once, while central models need constant full-duplex reads and writes.
Our standard is hardwired Cat6a for every production workstation. It sounds old school, but it removes jitter and packet loss. Wi-Fi 6 is fine for email and meetings.
Why does the server backbone matter so much?
Many generalist IT providers still connect file servers at 1 Gbps. When a single point cloud scan reaches 50 GB, that link is a straw draining a swimming pool.
We upgrade the backbone between switches and storage to 10 Gbps or 40 Gbps uplinks and enable jumbo frames (MTU 9000), which carries more data per packet, reduces server CPU load, and speeds large transfers. This tuning is part of our managed IT services.
Can a firewall slow down cloud BIM?
Yes. You may pay for 1 Gbps internet, but many firewalls cannot inspect that much traffic. When deep packet inspection is on, an undersized appliance becomes a dam between your team and the cloud.
We size security appliances to keep throughput high with full cybersecurity threat protection enabled, so you do not have to choose between speed and safety.
What is the best way to use CAD remotely?
Stream the pixels, not the data. Opening .dwg or .rvt files over a standard VPN sends data back and forth for every command, which is painfully slow and risks corruption.
High-performance remote desktop protocols such as PCoIP or Blast keep heavy files on the office server and stream a high-definition view of the desktop to the remote user. It is one of the fixes we use when hunting down the silent IT killers slowing firms down. For more on remote and multi-office setups, see the architect’s guide to sharing BIM and CAD files in the cloud.
How do you know where your network is losing time?
Measure it. Latency to Autodesk services, packet loss, firewall throughput under inspection, and server link utilization tell you more than a download speed test ever will. Our related post on whether your network is slowing down Revit or AutoCAD covers the symptoms to watch for.
Get a network audit built for Revit
Call (469) 916-9362 or book a BIM network audit. We will test latency, packet loss, firewall throughput, and backbone speed, then show you exactly what is slowing your models down.
Frequently asked questions
What internet speed does an architecture firm need for Revit?
Speed matters less than latency. Most firms do well with symmetrical business fiber, as long as latency to Autodesk services stays under about 50 ms.
Why does Revit sync work in the office but fail from home?
Home connections and VPNs add latency and packet loss. Remote desktop streaming usually fixes this by keeping the model on the office network.
Is Cat6 enough or do we need Cat6a?
Cat6a supports 10 Gbps over longer runs and is the safer choice for new cabling in design offices.
Do jumbo frames work with every device?
Every device on the storage path must support the same MTU. They should be configured carefully and tested before rollout.



