Local Law 152 of 2016: NYC Gas Piping Inspection Requirements
A gas explosion due to two improperly welded Consolidated Edison gas pipes leveled two buildings in East Harlem in 2014, killing eight people, injuring at least 70 others, and displaced over 100 families. A year later, an illegal tap into a gas main in the East Village led to a gas explosion which killed two people, injured nineteen, and destroyed three buildings located in the East Village/Lower East Side Historic District. In the wake of these catastrophic gas explosions, New York City enacted a series of gas safety laws in 2016, including Local Law 152 of 2016, which requires the periodic inspection and testing of gas piping systems.

What does the Local Law 152 inspection and certification process entail?
Gas piping systems in most NYC buildings must be inspected at least once every four years by a Licensed Master Plumber (LMP) or a qualified, registered Journeyman Plumber working under the direct and continuing supervision of an LMP.
Under Local Law 142 of 2025, the inspection scope extends from the point where gas piping enters the building through the connection to gas appliances, including applicable commercial spaces. Gas piping and appliances within individual dwelling units are excluded.
Inspections cover exposed gas piping in common areas, mechanical rooms, rooftops, and applicable non-residential spaces, checking for:
- Excess atmospheric corrosion or piping deterioration that has led to an unsafe conditions
- Gas leaks
- Illegal connections (such as theft, diversion of service, cross connections or connections made with substandard parts or materials)
- Non-code compliant installations
In addition, public spaces, hallways, corridors, and mechanical and boiler rooms that contain gas piping or gas utilization equipment must be tested with a portable combustible gas detector to determine if there is any gas leak.
Inspection report
Within 30 days of the inspection, the inspection entity must provide the building owner with a report documenting the inspection results and any conditions requiring correction.
Inspection certification
At least two days before the inspection, the Licensed Master Plumber (LMP) or qualified Journeyman Plumber performing the inspection must submit an inspection notification through DOB NOW: Safety.
Within 60 days of the inspection, the owner must submit the required Initial Certification through DOB NOW: Safety. The building owner must also complete the required electronic attestation.
Effective July 27, 2026, DOB discontinued the GPS1 and GPS2 forms and the previous gas piping certification portal. Certifications, correction filings, and related requests are now submitted through DOB NOW: Safety.
If conditions requiring correction are identified, owners must complete the necessary work and submit a Certification of Correction within 120 days of the initial inspection, or within 180 days if additional correction time was indicated in the Initial Certification.
Filing fees: The standard inspection certification fee is $35. Extension requests and certifications of correction also carry a $35 fee. Certification that a building has no gas piping costs $375, while documentation establishing that a building has no active gas service costs $480.
Owners must retain required inspection and certification records for at least 10 years and make them available to DOB upon request.
What type of buildings does the law affect?
All buildings with gas piping systems must comply except for those in occupancy group R-3. Buildings classified as group R-3 includes buildings or portions of buildings that have no more than two dwelling units, such as single and two-family homes, and group homes such as convents and monasteries with fewer than 20 occupants. To identify a building’s classification, the occupancy group can be found on the building’s Certificate of Occupancy.

When are the inspections due?
Inspection and certification filing windows are organized by community district and are one year long, with the first ever cycle having begun on January 1, 2020. To identify your community district, search by address at communityprofiles.planning.nyc.gov. After the initial cycle, inspections must be performed and submitted every four years. The second cycle of inspection windows for the four groups of community districts are as follows:
| Date Range for Inspection | Buildings in Community Districts |
| January 1, 2024 – December 31, 2024* | 1, 3, and 10 in all boroughs |
| January 1, 2025 – December 31, 2025* | 2, 5, 7, 13, and 18 in all boroughs |
| January 1, 2026 – December 31, 2026* | 4, 6, 8, 9, and 16 in all boroughs |
| January 1, 2027 – December 31, 2027* | 11, 12, 14, 15, and 17 in all boroughs |
* and no later than December 31 within every fourth calendar year thereafter
Inspections must be completed within the applicable calendar-year inspection window, with certifications submitted within 60 days of the inspection. Owners should schedule inspections early enough to complete the required filing process and address any identified deficiencies.
Buildings that cannot complete their inspection by the applicable deadline may qualify for a one-time 180-day extension, which must be requested through DOB NOW: Safety by the original deadline.
For the latest inspection schedules, requirements, and exemptions, visit the NYC Department of Buildings’ Periodic Gas Piping Inspections page.
When are the inspections due for new buildings?
New buildings must be inspected for the first time in the tenth year after a temporary or final certificate of occupancy or letter of completion is issued. Subsequent inspections must follow the above schedule by community district.
What is the penalty for non-compliance?
Failure to file the required gas piping inspection certification by the applicable deadline may result in a civil penalty of $5,000 for most covered buildings or $1,500 for three-family residential buildings.
Owners may challenge a violation or request a penalty waiver through DOB NOW: Safety, subject to applicable requirements and deadlines.
What about buildings without gas piping systems?
Buildings subject to Local Law 152 that do not contain gas piping must submit a certification confirming the absence of a gas piping system. This certification may be provided by a Licensed Master Plumber, Registered Design Professional, or utility company.
Under the updated rules, a certification confirming that a building has no gas piping system generally needs to be submitted only once.
Buildings that contain gas piping but no longer receive active gas service have separate documentation requirements, including statements from the owner and utility company. These must be submitted during each applicable inspection cycle.
What if a unsafe or hazardous condition is found?
If an unsafe or hazardous condition is identified, the inspector must immediately notify the building owner, the gas utility, and DOB. For an active gas leak or other immediate danger, call 911.
Building owners must take immediate action to address the hazardous condition in accordance with NYC Construction Codes, including obtaining required permits and arranging corrective work.

What are other gas safety laws?
To prevent conditions that might lead to gas explosions, New York City has enacted a series of gas safety laws. The most important to know for your building’s safety include:
Local Law 150 of 2016: All “gas work” other than that performed, serviced, and maintained by utility companies must be performed by a Licensed Master Plumber (LMP) with gas work qualification. Effective January 1, 2020.
Local Law 151 of 2016: The final inspection of gas piping systems must be performed by the DOB in the presence of the permit holder, the registered design professional of record, or the superintendent of construction. Any defects noted must be corrected. Self-certifications are no longer allowed for any “gas work” throughout New York City. Effective January 1, 2018.
Local Law 153 of 2016: Owners must notify their residents of the correct procedures to follow if they suspect that there is a gas leak. Effective April 2017.
Local Law 154 of 2016: Gas utility companies must notify the DOB within 24 hours if gas is shut off and/or not restored after inspection because of safety concerns. Effective March 2017.
Local Law 157 of 2016: Amends both the Housing Maintenance Code and the Administrative Code regarding the mandatory installation of carbon monoxide, smoke and natural gas alarms for residential occupancies.
Local Law 159 of 2016: Building owners are required to take immediate action to immediately correct hazardous (Class 1) gas piping defects to avoid additional penalties. Effective March 6, 2017.
In addition, New York State law requires that gas utilities (ConEd/National Grid) inspect gas service lines once every three years in residential districts, and annually in business districts. The inspection work includes a gas leakage survey and a visual inspection for atmospheric corrosion on all exposed piping to the outlet of the gas meter inside the building.
For additional information, read the DOB’s Local Law 152 of 2016 Frequently Asked Questions.
