Pharmaceutics & Drug Industries

Gastroretentive levofloxacin (LVF) floating mini-tablets for the eradication of Helicobacter pylori (H. pylori) were prepared using the matrix forming polymer hydroxypropyl methylcellulose (HPMC K100M), alone or with Carbopol 940P in different ratios by wet granulation technique. Buoyancy of mini-tablets was achieved by an addition of an effervescent mixture consisting of sodium bicarbonate and anhydrous citric acid to some formulations. The prepared mini-tablets were evaluated for weight variation, thickness, friability, hardness, drug content, in vitro buoyancy, water uptake and in vitro release. The optimized formula was subjected to further studies: FT-IR, DSC analysis and in vivo examination in healthy volunteers. The prepared mini-tablets exhibited satisfactory physicochemical characteristics. Incorporation of gas-generating agent improved the floating parameters. HPMC K100M mini-tablet formulation (F1) offered the best controlled drug release (>8 h) along with floating lag time <1 s and total floating time >24 h. The obtained DSC thermograms and FT-IR charts indicated that there is no positive evidence for the interaction between LVF and ingredients of the optimized formula. The in vivo test

The aim of the current study was to formulate terconazole (TCZ) loaded polymeric mixed micelles (PMMs) incorporating Cremophor EL as a stabilizer and a penetration enhancer. A 2 full factorial design was performed using Design-Expert® software for the optimization of the PMMs which were formulated using Pluronic P123 and Pluronic F127 together with Cremophor EL. To confirm the role of Cremophor EL, PMMs formulation lacking Cremophor EL was prepared for the purpose of comparison. Results showed that the optimal PMMs formulation (F7, where the ratio of total Pluronics to drug was 40:1, the weight ratio of Pluronic P123 to Pluronic F127 was 4:1, and the percentage of Cremophor EL in aqueous phase was 5%) had a high micellar incorporation efficiency (92.98 ± 0.40%) and a very small micellar size (33.23 ± 8.00 nm). Transmission electron microscopy revealed that PMMs possess spherical shape and good dispersibility. The optimal PMMs exhibited superior physical stability when compared with ...

Background Fumaria officinalis (F. officinalis, FO) has been used in many inflammatory and painful-ailments. The main aim of this work is to perform an in-depth bio-guided phytochemical investigation of F. officinalis by identifying its main-active ingredients. Optimizing pharmacokinetics via niosomal-preparation will also be done to enhance their in vivo antineuropathic and anti-inflammatory potentials, and to explore their possible-mechanism of actions. Methods Bio-guided phytochemical-investigations including fractionation, isolation, chromatographic-standardization, and identification of the most active compound(s) were done. Optimized niosomal formulations of F. officinalis most active compound(s) were prepared and characterized. An in vivo biological-evaluation was done exploring acute, subchronic, and chronic alloxan-induced diabetes and diabetic-neuropathy, and carrageenan-induced acute inflammatory-pain and chronic-inflammatory edema. Results In-vivo bio-guided fractionatio...

Background. Diabetes is a debilitating chronic health condition that is associated with certain pain syndromes. The present study sought to evaluate chronic pain and its association with diabetes mellitus at a population level. Methods. A population-based cross-sectional questionnaire survey study was conducted in Al-Kharj, Saudi Arabia, from January 2016 to June 2016. Participants from both private and governmental institutions were selected following a multistage sampling technique and using a cluster sampling method. Anthropometric measurements were taken, including body weight, height, body mass index (BMI) and waist circumference. A blood sample was also drawn from each respondent for fasting blood sugar, HbA1c, and fasting lipid profile. A P value of less than 0.05 indicated statistical significance. Results. A total of 1003 subjects were included for final analysis. Compared to prediabetic and nondiabetic individuals, diabetic subjects had a higher prevalence of lower limb pa...

Burn wound is usually associated by antibiotic-resistant Pseudomonas aeruginosa infection that worsens and complicates its management. An effective approach is to use natural antibiotics such as cinnamon oil as a powerful alternative. This study aims to investigate topical nanostructured lipid carrier (NLC) gel loaded cinnamon oil for Pseudomonas aeruginosa wound infection. A 2 4 full factorial design was performed to optimize the formulation with particle size 108.48 ± 6.35 nm, zeta potential À37.36 ± 4.01 mV, and EE% 95.39 ± 0.82%. FTIR analysis revealed no excipient interaction. Poloxamer 407 in a concentration 20% w/w NLC gel was prepared for topical application. Drug release exhibited an initial burst release in the first five hours, followed by a slow, sustained release of up to five days. NLC-cinnamon gel has a significant ability to control the drug release with the lowest minimum inhibitory concentration again P. aeruginosa compared to other formulations (p < .05). In vivo study also showed NLC-cinnamon gel effectively healed the infected burned wound after a six-day treatment course with better antibacterial efficacy in burned animal models. Histological examination ensured the tolerability of NLC-cinnamon gel. The results suggest that nanoparticle-based cinnamon oil gel is a promising natural product against antibiotic-resistant strains of P. aeruginosa in wound infection.

Background At the end of 2019, the new Coronavirus disease 2019 (COVID-19) strain causing severe acute respiratory syndrome swept the world. From November 2019 till February 2021, this virus infected nearly 104 million, with more than two million deaths and about 25 million active cases. This has prompted scientists to discover effective drugs to combat this pandemic. Area covered Drug repurposing is the magic bullet for treating severe acute respiratory syndrome coronavirus 2 (SARS-CoV2). Therefore, several drugs have been investigated in silico, in vitro, as well as through human trials such as anti-SARS-CoV2 agents, or to prevent the complications resulting from the virus. In this review, the mechanisms of action of different therapeutic strategies are summarized. According to the WHO, different classes of drugs can be used, including anti-malarial, antiviral, anti-inflammatory, and anti-coagulant drugs, as well as angiotensin-converting enzyme inhibitors, antibiotics, vitamins, zinc, neutralizing antibodies, and convalescent plasma therapy. Recently, there are some vaccines which are approved against SARS-CoV2. Expert opinion A complete understanding of the structure and function of all viral proteins that play a fundamental role in viral infection, which contribute to the therapeutic intervention and the development of vaccine in order to reduce the mortality rate.

Purpose A novel coronavirus (COVID-19) that has not been previously identified in humans and has no specific treatment has recently spread. Treatment trials using antiviral and immune-modulating drugs such as hydroxychloroquine (HCQ) were used to control this viral outbreak however several side effects have emerged. Berberine (BER) is an alkaloid that has been reported to reveal some pharmacological properties including antioxidant and antimicrobial activities. Additionally, Zinc oxide nanoparticles (ZnO-NPs) possess potent antioxidant and anti-inflammatory properties. Therefore, this study was undertaken to estimate the efficiency of both BER and synthetic ZnO/BER complex as an anti-COVID-19 therapy. Methods First, the ZnO/BER complex was prepared by the facile mixing method. Then in vitro studies on the two compounds were conducted including VeroE6 toxicity, anti-COVID-19 activity, determination of inhibitory activity towards papain-like proteinase (PL pro) and spike protein-and receptor-binding domain (RBD) as well as assessment of drug toxicity on RBCs. Results The results showed that ZnO/BER complex acts as an anti-COVID-19 by inhibiting spike protein binding with angiotensin-converting enzyme II (ACE II), PL pro activity, spike protein and E protein levels, and expression of both E-gene and RNA dependent RNA polymerase (RdRp) at a concentration lower than that of BER or ZnO-NPs alone. Furthermore, ZnO/BER complex had antioxidant and antimicrobial properties where it prevents the auto oxidation of 2,2-Diphenyl-1-picrylhydrazyl (DPPH) and the culture of lower respiratory system bacteria that affected Covid 19 patients. The ZnO/BER complex prevented as well the HCQ cytotoxic effect on both RBC and WBC (in vitro) and hepatotoxicity, nephrotoxicity and anemia that occurred after HCQ long administration in vivo. Conclusion The ZnO/BER complex can be accounted as promising anti-COVID 19 candidate because it inhibited the virus entry, replication, and assembly. Furthermore, it could be used to treat a second bacterial infection that took place in hospitalized COVID 19 patients. Moreover, ZnO/BER complex was found to eliminate the toxicity of long-term administration of HCQ in vivo.

The increasing burden of respiratory diseases caused by microbial infections poses an immense threat to global health. This review focuses on the various types of biofilms that affect the respiratory system and cause pulmonary infections, specifically bacterial biofilms. The article also sheds light on the current strategies employed for the treatment of such pulmonary infection-causing biofilms. The potential of nanocarriers as an effective treatment modality for pulmonary infections is discussed, along with the challenges faced during treatment and the measures that may be implemented to overcome these. Understanding the primary approaches of treatment against biofilm infection and applications of drug-delivery systems that employ nanoparticle-based approaches in the disruption of biofilms are of utmost interest which may guide scientists to explore the vistas of biofilm research while determining suitable treatment modalities for pulmonary respiratory infections.

Gastroretentive levofloxacin (LVF) floating mini-tablets for the eradication of Helicobacter pylori (H. pylori) were prepared using the matrix forming polymer hydroxypropyl methylcellulose (HPMC K100M), alone or with Carbopol 940P in different ratios by wet granulation technique. Buoyancy of mini-tablets was achieved by an addition of an effervescent mixture consisting of sodium bicarbonate and anhydrous citric acid to some formulations. The prepared mini-tablets were evaluated for weight variation, thickness, friability, hardness, drug content, in vitro buoyancy, water uptake and in vitro release. The optimized formula was subjected to further studies: FT-IR, DSC analysis and in vivo examination in healthy volunteers. The prepared mini-tablets exhibited satisfactory physicochemical characteristics. Incorporation of gas-generating agent improved the floating parameters. HPMC K100M mini-tablet formulation (F1) offered the best controlled drug release (>8 h) along with floating lag time <1 s and total floating time >24 h. The obtained DSC thermograms and FT-IR charts indicated that there is no positive evidence for the interaction between LVF and ingredients of the optimized formula. The in vivo test

Burn wound is usually associated by antibiotic-resistant Pseudomonas aeruginosa infection that worsens and complicates its management. An effective approach is to use natural antibiotics such as cinnamon oil as a powerful alternative. This study aims to investigate topical nanostructured lipid carrier (NLC) gel loaded cinnamon oil for Pseudomonas aeruginosa wound infection. A 2 4 full factorial design was performed to optimize the formulation with particle size 108.48 ± 6.35 nm, zeta potential À37.36 ± 4.01 mV, and EE% 95.39 ± 0.82%. FTIR analysis revealed no excipient interaction. Poloxamer 407 in a concentration 20% w/w NLC gel was prepared for topical application. Drug release exhibited an initial burst release in the first five hours, followed by a slow, sustained release of up to five days. NLC-cinnamon gel has a significant ability to control the drug release with the lowest minimum inhibitory concentration again P. aeruginosa compared to other formulations (p < .05). In vivo study also showed NLC-cinnamon gel effectively healed the infected burned wound after a six-day treatment course with better antibacterial efficacy in burned animal models. Histological examination ensured the tolerability of NLC-cinnamon gel. The results suggest that nanoparticle-based cinnamon oil gel is a promising natural product against antibiotic-resistant strains of P. aeruginosa in wound infection.

The interaction between mercaptoacetic acid (MA)-capped CdTe QDs, MA-capped CdTe/ZnS QDs or glutathione (GSH)-capped CdTe QDs with As(III) was studied using fluorescence spectrometry. As (III) has a high-affinity to reduced-GSH to form As(SG) 3 , and the emission of the GSH-capped CdTe QDs (em. = 612 nm) is quenched effectively. Thus, a novel fluorescence spectrometric method was developed for As (III) determination by using GSH-CdTe QDs. Under optimal conditions, the quenched fluores-cence intensity (F 0 /F) increased linearly with the concentration of As (III) ranging from 5.0 × 10 −6 to 25 × 10 −5 mol L −1. The limit of detection (3) for As (III) was found to be 2 × 10 −8 mol L −1. This method is potentially useful in visual detection of As (III) under irradiation of the ultraviolet light.

h i g h l i g h t s We studied the radiation resistance of the glass fiber reinforced epoxy composite. The ILSS at 77 K was not affected up to 5 MGy but decreased significantly at 10 MGy. The T g of the resin decreased slightly with the increase of irradiation dose. The composite appears to be resistant to a dose of 5.0 MGy.

In this work a new method was developed for synthesis of aqueous cadmium-free, CuInS (CIS) quantum dots (QDs) at room temperature. CIS QDs as cores were alloyed with 25% of Zn 2þ ions at room temperature and followed by the growth of ZnS shell to form CIS and ZCIS QDs. X-ray diffraction (XRD) analysis confirmed that the ZCIS QDs have a wurtzite structure. Moreover, the energy-dispersive X-ray (EDX) analysis demonstrated that ZCIS QDs are composed of Cu, In, Zn and S elements. It was found that Zn ions introduced into CIS QDs lattice structure did not change in the crystal structure. ZCIS/ZnS QDs showed high photoluminescence (PL) peak and its position and intensity depend on the Cu:In ratio. High resolution transmission electron microscope (HRTEM) images showed that ZCIS and ZCIS/ZnS QDs have a spherical shape with average diameter sizes of 4.0 nm and 7.0 nm, respectively. The selected area electron diffraction (SAED) suggested that the prepared ZCIS QDs are crystalline with an interplanar distance of 0.320 nm.