Questions for Model Year '1988'

My reverse lights (white) stay on in all forward gears, curious why and how to correct this minor aggravation.

Wednesday 10/14/2026 | 1988 | 911 Carrera Targa | Electrical

Of course its hard for me to tell while driving, but I know they are on when in neutral, and pretty sure they don't cut off when going in forward gears.Please advise on whey and how to correct this.ThanksGreg

READ ANSWER

Engine Stalling When Cold

Monday 07/20/2026 | 1988 | 911 Carrera | Engine

After not being started for 10 years, my engine had new plugs, ignition components, fuel pump, and DME unit installed 3 years ago during its restoration. Injectors were cleaned. It starts easily when cold and idles well after starting. While still cold, however, when I disengage the clutch at a stop, the RPMs will often plummet and the engine will stall. It restarts easily. Once the engine is warm the problem disappears and it then idles well at stops. The engine performs perfectly well ...

READ ANSWER

Does the timing belt tensioner need replaced when the timing belt is changed?

Thursday 07/02/2026 | 1988 | 944S | Engine

George,I could not find you covering this subject in my search of existing tech articles. I just received a quote to do the timing belt and water pump and it included the timing belt tensioner for an additional $1000. Is it necessary?Thanks,Dan

READ ANSWER

Reference 1988 944S, at what interval should water pump be replaced when the timing belt is replaced? Also, what version of water pump, as I see there are different later styles as it pertains to open or blocked ports?

Monday 01/05/2026 | 1988 | 944S | Engine

READ ANSWER

Horn hook up

Wednesday 12/17/2025 | 1988 | 911 Carrera Cabriolet | Electronics

My horn stopped working and I replaced the relay. I just noticed these two wires were not connected at the horn box. The one main does attach but the ground does not fit on the tab thats attached to the bracket. Fyi. My horn did work previously. Is this correct or am I doing something wrong with the attached wires?

READ ANSWER

Window frame rubber guide install

Tuesday 12/09/2025 | 1988 | 911 Carrera Cabriolet | Other

Id like to replace my window frame rubber guides. I see the top 2 Allen nuts but theres 2 more behind the window seal but they are just odd looking flat circles. How do I remove these guides!?

READ ANSWER

Part#: 944-512-463-00-OEM Rear Wing Rubber Gasket Rear Wing Rubber Gasket(between glass and spoiler)

Monday 12/08/2025 | 1988 | 944 Turbo S | Body

Hello,I’m having trouble installing my new Genuine Porsche rear wing rubber gasket. Please note that I am not referring to the thick rubber hatch gasket. From what I see from the old one, each end of the gasket has a flap to cover the screw once installed. The gasket I received has ends that appear solid, whereas my old one has visible flaps. Additionally, I don’t see a separate split that would allow me to insert the screw and cover it with the flap. I tried to separate th ...

READ ANSWER

Independent mechanic in San Fernando Valley

Sunday 11/23/2025 | 1988 | 911 Carrera Cabriolet | Other

Looking for a mechanic that has a business out of his home or can come to my house to do work. Trying to avoid the ridiculous Mark up on parts and service hour rates if possible!

READ ANSWER

Mr Bueselinck - Thanks for the info about an extended hub steering wheel for one of the 924S, 944 and 968 cars. My local Porsche dealer parts department hasn’t been able to find the parts number. Do you know it or how to get it?

Sunday 11/09/2025 | 1988 | 924S | Other

FYI Pelican offers a 1/2” extender piece for the steering column if all else fails.

READ ANSWER

Does anyone recommend a Place near Independence Louisiana that can do a thorough PPI on an 80s 911 ?

Tuesday 11/04/2025 | 1988 | 911 Carrera Cabriolet | Other

I need a thorough PPI done on an 88 911Including paint meter readings and compression test. I am in the independent area of LA. Not far from Baton Rouge or Hammond

READ ANSWER

How to remove gauge cluster, due to odometer failure.

Monday 10/27/2025 | 1988 | 944S | Cables and Controls

re: George Beuselinck's recommendation to send gauge cluster to professional repair shop.However, I would appreciate some guidance on how to remove the cluster. Does the steering wheel need removed? How to remove air bag/steering wheel? How to disarm airbag? Thank you,Dan [email protected]

READ ANSWER

Mr Bueselimck: Thanks for hour past help. Did any if the successors to the 924S have an adjustable steering column that could be used on a 924S. The reason for this odd question is that the space between the steering wheel and the brake pedal is a little short for my legs.

Tuesday 10/21/2025 | 1988 | 924S | Cables and Controls

Did any of the 0924S’s successors have an adjustable steering column, or an extra like a longer one, that could be adapted for my 924S? My legs are a little longer than the distance between the steering wheel and the brake pedal. I’ve had this car since 1990, but as I get older I would appreciate a direct shot the brake pedal. ThanksRick Heyke

READ ANSWER

Certificate of authenticity

Sunday 09/28/2025 | 1988 | 911 Carrera Cabriolet | Other

Hi,How do I go about getting an "authencity certificate"? I have a 1988 Porsche 911 Cab with the rare Metallic Diamond Blue color and marine blue interior but it's not an anniversary model. Definitely ordered from the dealer as a special request. Mark

READ ANSWER

Power Convertible top latch (right side only) does not un-latch reliably.

Saturday 09/13/2025 | 1988 | 911 Carrera Cabriolet | Cables and Controls

My power convertible top does not reliably un-latch from the top of the windshield when opening. Right side only. Latch motor runs but the cam hangs up during the un-latch sequence. I can usually get it to unlatch by hitting that latch area with the palm of my hand during the sequence. The top closes and re-latches as designed. Is this just a lubrication issue or could the motor or latch mechanism be failing?thank you. ...

READ ANSWER

Brake light issue

Tuesday 09/09/2025 | 1988 | 911 Carrera Cabriolet | Brakes

I had my brake lines replaced and now my interior brake light will not turn off! Im trying to avoid not having to go back to my mechanic to fix this. Is there something I can do on my end to remedy this?

READ ANSWER