Questions for ''

Hydraulic ram for cabriolet 2000 carrera leaking

Saturday 09/05/2026 | 2000 | 911 Carrera Cabriolet | Cables and Controls

Hydraulic ram leaking on cabriolet

READ ANSWER

2007 987 Cayman Base - Codes P0491 and P0492

Friday 09/04/2026 | 2007 | Cayman | Electrical

I have a 2007 987.1 base and periodically get a P0491 and P0492. I put a ICARSOFT on it and when I run the SAI actuator test I just clicks. One I’m guessing it should run and 2 I bought a new relay but can’t find anything online where the relay goes. I know under the drivers dash and in back, I can’t find any diagrams of the relay boxes. Where would the relay go? I want to also jump it and try to manually turn it on. I also tried to run the engine compartment fan and got the same c ...

READ ANSWER

Correct Fuel Pressure for Zenith 40 TIN carbs

Friday 09/04/2026 | 1970 | 911T | Fuel System

I'm attempting to optimize the fuel pressure on my very original 1970 911T. I'm getting occasional flooding on hot starts; seems to be happening mostly on the right carb (passenger side). I'm aware that this could be a float level or needle valve issue, so I'll be checking both. But I'm also checking fuel pressure. My original fuel pump, which has been recently (by Fuel Injection in Calif.), the pressure reading I'm getting is a bit over 4 PSI, however I've been reading that these Zeniths ca ...

READ ANSWER

Over Revs and Porsche safety stance

Friday 09/04/2026 | 2008 | 911 Turbo | Engine

Option 2: Professional & FormalIs my understanding correct that following recent range 3–6 over-rev events, Porsche requires a minimum of 50 to 75 operating hours without further incidents to certify the engine is free of damage?Thanks

READ ANSWER

Any advice on how to repair a door sag on a 997.1 Targa4 that impacts locking...

Wednesday 09/02/2026 | 2007 | 911 Targa 4 | Body

Hello! I have a 997.1 Targa4 that is experiencing door sag (I think) that impacts me locking the door (it won't lock unless push up on the door as I shut it). It looks fine (no gaps or obvious over hand/under hang) but so far my solution is just to lift up as I shut it. Can I/should I try and lift the door in such a manner that it maybe bends back? the hinge looks fine (no cracks on paint or wear I can see). Thanks much in advance, ...

READ ANSWER

Effect of recent Over Revs on a cars desirability and resale value

Wednesday 09/02/2026 | 2008 | 911 Turbo | Engine

Morning I own an excellent-condition 2008 Porsche 997.1 Turbo 6-speed with 37,000 miles. Because the market for these cars continues to rise, I am getting ready to sell it.I recently dropped the car off at an independent repair shop. They have admitted to putting 42 unauthorized miles on the odometer. Furthermore, when I had them run an over-rev report, it revealed new over-revs in ranges 1 through 4.This inci ...

READ ANSWER

Looking for Pre Purchase Inspection Reference, San Antonio, TX

Tuesday 09/01/2026 | 1974 | 914 2.0 | Other

Hello,I’m finalizing a purchase of a ‘74 914 2.0 in San Antonio, TX and need a pre purchase inspection. This car may be a candidate for a full restore, but I need eyes on the vehicle from a competent technician who can identify obvious signs of damage, such as Hell hole rust. I’m in Northern California. if this request could be forwarded to the regional membership leadership, a few recommendations in the area from would be greatly appreciated.Thank you.Thomas Fil READ ANSWER

I'm trying to find a reliable porsche mechanic, how do I find a reliable list?

Tuesday 09/01/2026 | 2000 | Boxster S | Other

I've been unable to find a reliable Porsche mechanic and I've had the car for 18 plus years. Is there a registry or some established list of shops and/or mechanics?

READ ANSWER

Are there any other 1997 Boxster s in the club.

Tuesday 09/01/2026 | 1997 | Boxster | Other

READ ANSWER

Installation help with tonneau on 986

Tuesday 09/01/2026 | 2001 | Boxster S | Accessories

Where is this elastic strap supposed to clip when using the tonneau?

READ ANSWER

Best independent Boxster IMS mechanic Monterey CA?

Monday 08/31/2026 | 2003 | Boxster S | Engine

Looking dor best Boxster mechanic including possible IMS bearing replacement in Monterey, CA

READ ANSWER

Where can I buy a faceplate for a CDR 220 unit

Sunday 08/30/2026 | 2001 | 911 Carrera 4 | Electronics

Looking for a replacement faceplate for the radio in my 2001 Carrera 4

READ ANSWER

Continuing my special tools question: This is my home made spec tool 9593 to hold the crank pulley when romoving the crank nut. not pretty, but....

Saturday 08/29/2026 | 2004 | 911 Carrera | Engine

READ ANSWER

How can I connect an iPhone 17 (USB-C) to the audio PCM on a 2010 911?

Saturday 08/29/2026 | 2010 | 911 Carrera | Electronics

I have an iPhone 17 with a USB-C port, and I have made so many fruitless attempts using numerous connector configurations to get audio to the PCM. I was able to get things going with my former iPhone through its lightning port.Has anyone solved this?Thanks! --Rich S.

READ ANSWER

I have a 2000 996 911 cab My fob starts to blink rapidly when I try to set the alarm. Other than that it works fine. My Porsche dealer told me they could not reprogram the key without the unique code that is for the vehicle. Where or how can I get the code without having to get completely new keys. Thanks

Saturday 08/29/2026 | 2000 | 911 Carrera Cabriolet | Electronics

READ ANSWER