Questions for ''
Is it safe to plug a small hole in the rear tire
Saturday 09/05/2026 | 2015 | Boxster S | Wheels and Tires
Small nail in tire. PSI dropped to 26 while the vehicle was parked for about 2 weeks
READ ANSWERHydraulic ram for cabriolet 2000 carrera leaking
Saturday 09/05/2026 | 2000 | 911 Carrera Cabriolet | Cables and Controls
Hydraulic ram leaking on cabriolet
READ ANSWER2007 987 Cayman Base - Codes P0491 and P0492
Friday 09/04/2026 | 2007 | Cayman | Electrical
I have a 2007 987.1 base and periodically get a P0491 and P0492. I put a ICARSOFT on it and when I run the SAI actuator test I just clicks. One I’m guessing it should run and 2 I bought a new relay but can’t find anything online where the relay goes. I know under the drivers dash and in back, I can’t find any diagrams of the relay boxes. Where would the relay go? I want to also jump it and try to manually turn it on. I also tried to run the engine compartment fan and got the same c ...
READ ANSWERCorrect Fuel Pressure for Zenith 40 TIN carbs
Friday 09/04/2026 | 1970 | 911T | Fuel System
I'm attempting to optimize the fuel pressure on my very original 1970 911T. I'm getting occasional flooding on hot starts; seems to be happening mostly on the right carb (passenger side). I'm aware that this could be a float level or needle valve issue, so I'll be checking both. But I'm also checking fuel pressure. My original fuel pump, which has been recently (by Fuel Injection in Calif.), the pressure reading I'm getting is a bit over 4 PSI, however I've been reading that these Zeniths ca ...
READ ANSWEROver Revs and Porsche safety stance
Friday 09/04/2026 | 2008 | 911 Turbo | Engine
Option 2: Professional & FormalIs my understanding correct that following recent range 3–6 over-rev events, Porsche requires a minimum of 50 to 75 operating hours without further incidents to certify the engine is free of damage?Thanks
READ ANSWERAny advice on how to repair a door sag on a 997.1 Targa4 that impacts locking...
Wednesday 09/02/2026 | 2007 | 911 Targa 4 | Body
Hello! I have a 997.1 Targa4 that is experiencing door sag (I think) that impacts me locking the door (it won't lock unless push up on the door as I shut it). It looks fine (no gaps or obvious over hand/under hang) but so far my solution is just to lift up as I shut it. Can I/should I try and lift the door in such a manner that it maybe bends back? the hinge looks fine (no cracks on paint or wear I can see). Thanks much in advance, ...
READ ANSWEREffect of recent Over Revs on a cars desirability and resale value
Wednesday 09/02/2026 | 2008 | 911 Turbo | Engine
Morning I own an excellent-condition 2008 Porsche 997.1 Turbo 6-speed with 37,000 miles. Because the market for these cars continues to rise, I am getting ready to sell it.I recently dropped the car off at an independent repair shop. They have admitted to putting 42 unauthorized miles on the odometer. Furthermore, when I had them run an over-rev report, it revealed new over-revs in ranges 1 through 4.This inci ...
READ ANSWERLooking for Pre Purchase Inspection Reference, San Antonio, TX
Tuesday 09/01/2026 | 1974 | 914 2.0 | Other
Hello,I’m finalizing a purchase of a ‘74 914 2.0 in San Antonio, TX and need a pre purchase inspection. This car may be a candidate for a full restore, but I need eyes on the vehicle from a competent technician who can identify obvious signs of damage, such as Hell hole rust. I’m in Northern California. if this request could be forwarded to the regional membership leadership, a few recommendations in the area from would be greatly appreciated.Thank you.Thomas Fil ...
READ ANSWERI'm trying to find a reliable porsche mechanic, how do I find a reliable list?
Tuesday 09/01/2026 | 2000 | Boxster S | Other
I've been unable to find a reliable Porsche mechanic and I've had the car for 18 plus years. Is there a registry or some established list of shops and/or mechanics?
READ ANSWERAre there any other 1997 Boxster s in the club.
Tuesday 09/01/2026 | 1997 | Boxster | Other
READ ANSWERInstallation help with tonneau on 986
Tuesday 09/01/2026 | 2001 | Boxster S | Accessories
Where is this elastic strap supposed to clip when using the tonneau?
READ ANSWERBest independent Boxster IMS mechanic Monterey CA?
Monday 08/31/2026 | 2003 | Boxster S | Engine
Looking dor best Boxster mechanic including possible IMS bearing replacement in Monterey, CA
READ ANSWERWhere can I buy a faceplate for a CDR 220 unit
Sunday 08/30/2026 | 2001 | 911 Carrera 4 | Electronics
Looking for a replacement faceplate for the radio in my 2001 Carrera 4
READ ANSWERContinuing my special tools question: This is my home made spec tool 9593 to hold the crank pulley when romoving the crank nut. not pretty, but....
Saturday 08/29/2026 | 2004 | 911 Carrera | Engine
READ ANSWERHow can I connect an iPhone 17 (USB-C) to the audio PCM on a 2010 911?
Saturday 08/29/2026 | 2010 | 911 Carrera | Electronics
I have an iPhone 17 with a USB-C port, and I have made so many fruitless attempts using numerous connector configurations to get audio to the PCM. I was able to get things going with my former iPhone through its lightning port.Has anyone solved this?Thanks! --Rich S.
READ ANSWER

