Questions for 'Suspension'

Vibration at 65-75 Mph. Fresh tire balance. Vibration continues when placed in neutral at speed. Any Ideas on where the problem lies?

Friday 10/16/2026 | 2015 | Cayenne Turbo | Suspension

READ ANSWER

Thank you for the answer regarding my tiptronic buttons. the horn also isn't workinig and I've scheduled a visit to get the clockspring. Next question: My 02 boxster 2.7 has wheel spacers. What are the pros and cons. Thanks you in advANCE. Dave

Wednesday 10/07/2026 | 2002 | Boxster | Suspension

The spacers presented a real problem when the rotors needed to be replaced. Real stuck to the rotor I was told

READ ANSWER

Guidance on 986 Boxster springs

Wednesday 09/09/2026 | 1999 | Boxster | Suspension

I’ve been on several forums but the answers have been wildly divergent.What I’m trying to accomplish is sharpen the handling a little while maintaining the compliance which makes it great for travel. The ROW 030 sounds temping, but again, no solid indicators if this is a good choice for Illinois’ MX-like roads. I will add that at 80k miles, I am surprised to find the OE shocks seem good. I had a previous positive experience with Koni yellows on another German car so that part is easy. ...

READ ANSWER

What shocks would you reccomend in order to get a smoother ride. I won't be tracking the car.

Monday 08/10/2026 | 2014 | Cayman | Suspension

READ ANSWER

Bilstein Shocks Out of Stock since last year

Tuesday 07/21/2026 | 2006 | 911 Carrera 4S Cabriolet | Suspension

I am wondering if you could be of help to understand when Bilstein will have shock absorbers available for my car. They have been "out of stock" since last year and no one seems to know when they will be available again. I even wrote (via Linkedin) to the person who seems to be in charge at Bilstein - Steve Beaty in San Diego (linkedin.com/in/steven-beaty-a

READ ANSWER

Creaking noise in suspension when going over bump off camber

Friday 07/03/2026 | 2017 | Macan S | Suspension

I get a creaking noise when I go over a bump off camber. Noise sounds like it's coming from front passenger wheel area. Creaking noise can also be heard when braking and car lifts toward front suspension. Noise doesn't seem to happen when hitting the bump square with both wheels at same time.

READ ANSWER

Shock/Strut Assembly Kit

Friday 07/03/2026 | 1997 | Boxster | Suspension

This is a hobby car purchased from one original owner @ 48,000 miles.Shocks/struts are original @ 29 years and 66,300 miles. Need replacing!I do not race or rally this car. Looking for a good, after-market replacementoffering firm, but not harsh ride at a "moderate" price ... e.g., $1,200 - $1,500for 2 fronts + 2 rears.Something like Bilstein 13801-168-3801732 perhaps.a) Is that a good choice?b) Are there pothers I should consider?THX ve ...

READ ANSWER

Original owner of my 99 986 5 speed with 72k miles. While making a very hard left turn I'm hearing a brief grinding sound, so I stopped doing that. Someone told me it's likely a motor mount issue?

Tuesday 06/23/2026 | 1999 | Boxster | Suspension

READ ANSWER

Do you have to replace your shock mounts when replacing your rear shocks on a 2004 Porsche 4S/

Thursday 04/09/2026 | 2004 | 911 Carrera 4S | Suspension

I have Bilstien B6s on the rear now, but they are too stiff, and I am replacing them with B4s.

READ ANSWER

Koni strut installation issue

Thursday 03/12/2026 | 1973 | 914 2.0 | Suspension

I replace my very old Koni front strut inserts with new adjustable Koni inserts. All went well until I was tightening the top nut. When trying to get the required 59 lb/ft on it, the alignment tab on the washer sheared off. I replaced the washer and tried securing it with large channel-locks while torquing the nut to no avail. The same thing happened again. Yes, I lubed the bottom of the nut in both instances. ...

READ ANSWER

How where the rubber bushings originally installed at the factory on the 914?

Tuesday 03/10/2026 | 1973 | 914 2.0 | Suspension

I am not confident that my measurements taken prior to bushing removal are accurate. When I reinstall the bushings with liquid soap (the commonly recommended procedure), how much "working time" will I have to make corrections as I install the control arms to the chassis? Are there different solutions (glycerin, ??) that I can use that will increase it?

READ ANSWER

Is there an alternative to liquid soap when installing rubber suspension bushings?

Sunday 03/08/2026 | 1973 | 914 2.0 | Suspension

Can a high quality non-petroleum based grease be used to install the rubber suspension bushings on the front control arms?

READ ANSWER

Does anyone have experience tuning PASM shock dampers with DSC Sport Controller?

Monday 02/23/2026 | 2016 | Cayman GTS | Suspension

I just installed the v3 DSC Sport Controller with the default settings for 981 GTS with PDK and PASM. I’ve used it for one AutoX event, and it felt fine. However, I’ve read that the default tuning file can be improved for AutoX. Does anyone have experience using this controller and adjusting the settings for AutoX or similar use?

READ ANSWER

Lowering my 2011 base cayman, do not track car, other than an alignment, what else needs to be considered

Monday 02/16/2026 | 2011 | Cayman | Suspension

READ ANSWER

Looking for an alignment shop in cypress area

Wednesday 02/04/2026 | 2011 | Cayman S | Suspension

READ ANSWER