997 Park Assist In-Op With PCCM+

asked on Fri 10/16/2026
2006 | 911 Carrera S | Electronics | East Brunswick, NJ | 58500 miles

My recently acquired 997 has the Park Assist option (rear parking sensors) from the factory.

The previous owner had the PCCM+ installed and mentioned he never noticed the park assist work.

I had my local dealership look into the issue and complete the handover, no luck, the sensors still not working. Service advisor said its possible they just don't work.

Had my local Porsche specialist look into it and also did the handovers. The shop took apart the console and mentioned the installation was done correctly, fiber optic loops were properly closed, and during the handover procedure the PCM and the Park Assist function both showed an exclamation mark. They also checked that the carpet is dry and there were no watermarks under the seat.

I got a used park assist module from eBay and installed it, still doesn't work. The fuse was fine as well. The rear license plate light is working without issues since the sensors are powered by the same cables.

Do we know whether or not the PCCM+ works with the Park Assist system?


Expert Answer:

  1. PCCM and Park Assist

    submitted by Casey Parkin [POT] on

    Hello, I would reach out to the dealership, or your local dealership, where you purchased the system from and have them put in a request to Porsche after sales(parts/service) to answer your question.