Base Program
* Reverse mechanized reverb, swelling up to dry slaps, lightly sprinkled glitch dust.
* Combinable variations using footswitches, hotswitches & external pedals.
* Dual-forward reverbs, regeneration, diffusion & various modulations.

* Insert Mode Program. Program Mix 50%. Adjust for prominence of effect.
* Reverse Reverb into Glitch. Expected level of fine detail in optional Parallel routing.
* All controls programmed for an interactive approach.

HOTKNOBS
Program [P] HotKnob – default (60 OR CC#70)
* Adjust the reversed decay time, with multiple rate variables for glitching.

Preset [A] HotKnob – default (50 OR CC#1)
* Cross-mixing for low & high levels, with contour influence.
* Default has been set to the flattest EQ positioning.

Preset [B] HotKnob – default (60 OR CC#2)
* Select two-ended processor combinations, along with pitch shift intervals.

PEDALS
EXP1 (saved @ full Heel)
* Increases feedback & modulation levels.
* Decreases the late dry component.
* Adds diffusion to the initial reverb pair.
* Increases wet signal for the Glitch section.
* Mid-throw on pedal switches Interrupt to ON for reverb slicing.
* Decreases chance probability & stereo panning toward center.
* Dramatically increases the glide time for clock modulations.

EXP2 (saved @ full Heel)
* Increases forward reverb levels at two points in the effect chain.
* Slight movements near Toe captures huge reverbs infinitely or frozen.
* Smooths over glitches with extended envelope layering.

SWITCHES
* AUX 0 = default
* AUX 1,2,3 mapped to HS1, HS2, HS3 (momentary)
* AUX 4,5,6 mapped to HS1, HS2, HS3 (latching)

Program Alternates
0). medium reverse – no forward reverb – late dry slap – subtle interference clicks – no backend reverb.
1). short reverse – big forward wash – late dry touch – rhythmic glitch-let attack – long canyon reverb.
2). tiny reverse – small space reverb – medium late dry – manual clocking glitch – large room reverb.
3). long reverse – forward cathedral reverb – late dry tap – sweeping guttural chatter – small hall reverb.

PERFORM
1). [P] Act/Byp
2). TAP: 85 BPM
3). HS3 [L]
4). HS1 [L]
5). HS2 [L] ) + manual glitch
6). GLITCH [L]

See the Program Notes for specifics on external control parameters & MIDI mappings.