+420 267 313 996
Dual element probe 10E6
Description
Purpose
Thickness measurement of pipes and curved areas of containers with a small radius, with the ability to measure through and ignore coatings.
Particulars
Good acoustic contact on rough and very rusted surface.
Basic technical characteristics
| Technical data | Dual element probe 10E6 | Units |
|---|---|---|
| operation frequency | 10 | MHz |
| thickness range (for steel): | from 0.6 mm to 50 mm (without coating, Pulse-Echo mode) | |
| from 0.6 mm to 50 mm (through coatings up to 0.5 mm thick, Pulse-Echo-Coating mode) | ||
| from 0.6 mm to 10 mm (through coatings up to 1 mm thick, Echo-Echo mode) | ||
| dimensions of contact surface | Ø8 | mm |
| element dimensions | Ø6/2 | mm |
| min. product radius R at wall thickness S | R5/S1.2 | mm |
| max. product surface roughness | 40 | µm |
| overall dimensions | Ø25 x 45 | mm |
| operating temperature range | from -10 to +50 | °C |
Related products
-
B6-C – Ultrasonic Thickness Gauge
The B6-C ultrasonic thickness gauge is designed for corrosion and erosion monitoring of pipelines, tanks, pressure vessels and other industrial components, as well as thickness measurement of thin, curved, rough...
The B6-C is a portable ultrasonic thickness gauge for one-sided measurement of metals, alloys and suitable non-metallic materials. With dedicated probes, it can determine remaining wall thickness through protective coatings and display ultrasonic signals in A-scan and B-scan modes.
-
Dual element probe 5E10
Purpose Thickness measurement of metal tank walls, containers, large diameter pipes, with the ability to measure through and ignore coatings.
-
Delay line probe 15DL6
A probe is recommended for thickness measurement of very thin materials. Particulars High locality, possibility of testing in hard-to-access locations (longerons, pipes with small diameter, etc).