The properties of thermal radiation exchange between hot and cold objects can be strongly modifie... more The properties of thermal radiation exchange between hot and cold objects can be strongly modified if they interact in the near field where electromagnetic coupling occurs across gaps narrower than the dominant wavelength of thermal radiation. Using a rigorous fluctuational electrodynamics approach, we predict that ultra-thin films of plasmonic materials can be used to dramatically enhance near-field heat transfer. The total spectrally integrated film-to-film heat transfer is over an order of magnitude larger than between the same materials in bulk form and also exceeds the levels achievable with polar dielectrics such as SiC. We attribute this enhancement to the significant spectral broadening of radiative heat transfer due to coupling between surface plasmon polaritons (SPPs) on both sides of each thin film. We show that the radiative heat flux spectrum can be further shaped by the choice of the substrate onto which the thin film is deposited. In particular, substrates supporting surface phonon polaritons (SPhP) strongly modify the heat flux spectrum owing to the interactions between SPPs on thin films and SPhPs of the substrate. The use of thin film phase change materials on polar dielectric substrates allows for dynamic switching of the heat flux spectrum between SPP-mediated and SPhP-mediated peaks.
A new approach is introduced to significantly improve the performance of thermophotovoltaic (TPV)... more A new approach is introduced to significantly improve the performance of thermophotovoltaic (TPV) systems using low-dimensional thermal emitters and photovoltaic (PV) cells. By reducing the thickness of both the emitter and the PV cell, strong spectral selectivity in thermal emission and absorption can be achieved by confining photons in trapped waveguide modes inside the thin-films that act as thermal analogs to quantum wells. Simultaneously, photo-excited carriers travel shorter distances across the thin-films reducing bulk recombination losses resulting in a lower saturation current in the PV cell. We predict a TPV efficiency enhancement with near-field coupling between the thermal emitter and the PV cell up to 38.7% using a thin-film germanium (Ge) emitter at 1000 K and an ultra-thin gallium antimonide (GaSb) cell supported by perfect back reflectors separated by 100 nm. Even in the far-field limit, the efficiency is predicted to reach 31.5%, which is over an order of magnitude ...
Volume 10: Heat and Mass Transport Processes, Parts A and B, 2011
ABSTRACT Highly stretched polyethylene nanofibers are demonstrated to have thermal conductivities... more ABSTRACT Highly stretched polyethylene nanofibers are demonstrated to have thermal conductivities as high as ∼ 100 W/m.K along the fiber direction, which is comparable to many metals and is 3 orders of magnitude larger than the typical thermal conductivity of bulk polymers. The high thermal conductivity is attributed to the restructure of polymer chains in nanofibers by stretching, which improves the fiber quality toward the “ideal” single crystalline fibers. Our results suggest that high thermal conductivity polyethylene nanofibers may be able to serve as a cheaper alternative to conventional metal-based heat transfer materials in a wide range of applications.
Bulk polymers are generally regarded as thermal insulators, and typically have thermal conductivi... more Bulk polymers are generally regarded as thermal insulators, and typically have thermal conductivities on the order of 0.1 W m 21 K 21 (ref. 1). However, recent work 2-4 suggests that individual chains of polyethylene-the simplest and most widely used polymer-can have extremely high thermal conductivity. Practical applications of these polymers may also require that the individual chains form fibres or films. Here, we report the fabrication of high-quality ultra-drawn polyethylene nanofibres with diameters of 50-500 nm and lengths up to tens of millimetres. The thermal conductivity of the nanofibres was found to be as high as ∼104 W m 21 K 21 , which is larger than the conductivities of about half of the pure metals. The high thermal conductivity is attributed to the restructuring of the polymer chains by stretching, which improves the fibre quality toward an 'ideal' single crystalline fibre. Such thermally conductive polymers are potentially useful as heat spreaders and could supplement conventional metallic heat-transfer materials, which are used in applications such as solar hot-water collectors, heat exchangers and electronic packaging.
We revisit the mechanisms governing the sub-wavelength spatial localization of light in surface p... more We revisit the mechanisms governing the sub-wavelength spatial localization of light in surface plasmon polariton (SPP) modes by investigating both local and global features in optical powerflow at SPP frequencies. Close inspection of the instantaneous Poynting vector reveals formation of optical vortices -localized areas of cyclic powerflow -at the metal-dielectric interface. As a result, optical energy circulates through a subwavelength-thick 'conveyor belt' between the metal and dielectric where it creates a high density of optical states (DOS), tight optical energy localization, and low group velocity associated with SPP waves. The formation of bonding and anti-bonding SPP modes in metaldielectric-metal waveguides can also be conveniently explained in terms of different spatial arrangements of localized powerflow vortices between two metal interfaces. Finally, we investigate the underlying mechanisms of global topological transitions in metamaterials composed of multiple metal and dielectric films, i.e., transitions of their iso-
The properties of thermal radiation exchange between hot and cold objects can be strongly modifie... more The properties of thermal radiation exchange between hot and cold objects can be strongly modified if they interact in the near field where electromagnetic coupling occurs across gaps narrower than the dominant wavelength of thermal radiation. Using a rigorous fluctuational electrodynamics approach, we predict that ultra-thin films of plasmonic materials can be used to dramatically enhance near-field heat transfer. The total spectrally integrated film-to-film heat transfer is over an order of magnitude larger than between the same materials in bulk form and also exceeds the levels achievable with polar dielectrics such as SiC. We attribute this enhancement to the significant spectral broadening of radiative heat transfer due to coupling between surface plasmon polaritons (SPPs) on both sides of each thin film. We show that the radiative heat flux spectrum can be further shaped by the choice of the substrate onto which the thin film is deposited. In particular, substrates supporting surface phonon polaritons (SPhP) strongly modify the heat flux spectrum owing to the interactions between SPPs on thin films and SPhPs of the substrate. The use of thin film phase change materials on polar dielectric substrates allows for dynamic switching of the heat flux spectrum between SPP-mediated and SPhP-mediated peaks.
A new approach is introduced to significantly improve the performance of thermophotovoltaic (TPV)... more A new approach is introduced to significantly improve the performance of thermophotovoltaic (TPV) systems using low-dimensional thermal emitters and photovoltaic (PV) cells. By reducing the thickness of both the emitter and the PV cell, strong spectral selectivity in thermal emission and absorption can be achieved by confining photons in trapped waveguide modes inside the thin-films that act as thermal analogs to quantum wells. Simultaneously, photo-excited carriers travel shorter distances across the thin-films reducing bulk recombination losses resulting in a lower saturation current in the PV cell. We predict a TPV efficiency enhancement with near-field coupling between the thermal emitter and the PV cell up to 38.7% using a thin-film germanium (Ge) emitter at 1000 K and an ultra-thin gallium antimonide (GaSb) cell supported by perfect back reflectors separated by 100 nm. Even in the far-field limit, the efficiency is predicted to reach 31.5%, which is over an order of magnitude ...
Volume 10: Heat and Mass Transport Processes, Parts A and B, 2011
ABSTRACT Highly stretched polyethylene nanofibers are demonstrated to have thermal conductivities... more ABSTRACT Highly stretched polyethylene nanofibers are demonstrated to have thermal conductivities as high as ∼ 100 W/m.K along the fiber direction, which is comparable to many metals and is 3 orders of magnitude larger than the typical thermal conductivity of bulk polymers. The high thermal conductivity is attributed to the restructure of polymer chains in nanofibers by stretching, which improves the fiber quality toward the “ideal” single crystalline fibers. Our results suggest that high thermal conductivity polyethylene nanofibers may be able to serve as a cheaper alternative to conventional metal-based heat transfer materials in a wide range of applications.
Bulk polymers are generally regarded as thermal insulators, and typically have thermal conductivi... more Bulk polymers are generally regarded as thermal insulators, and typically have thermal conductivities on the order of 0.1 W m 21 K 21 (ref. 1). However, recent work 2-4 suggests that individual chains of polyethylene-the simplest and most widely used polymer-can have extremely high thermal conductivity. Practical applications of these polymers may also require that the individual chains form fibres or films. Here, we report the fabrication of high-quality ultra-drawn polyethylene nanofibres with diameters of 50-500 nm and lengths up to tens of millimetres. The thermal conductivity of the nanofibres was found to be as high as ∼104 W m 21 K 21 , which is larger than the conductivities of about half of the pure metals. The high thermal conductivity is attributed to the restructuring of the polymer chains by stretching, which improves the fibre quality toward an 'ideal' single crystalline fibre. Such thermally conductive polymers are potentially useful as heat spreaders and could supplement conventional metallic heat-transfer materials, which are used in applications such as solar hot-water collectors, heat exchangers and electronic packaging.
We revisit the mechanisms governing the sub-wavelength spatial localization of light in surface p... more We revisit the mechanisms governing the sub-wavelength spatial localization of light in surface plasmon polariton (SPP) modes by investigating both local and global features in optical powerflow at SPP frequencies. Close inspection of the instantaneous Poynting vector reveals formation of optical vortices -localized areas of cyclic powerflow -at the metal-dielectric interface. As a result, optical energy circulates through a subwavelength-thick 'conveyor belt' between the metal and dielectric where it creates a high density of optical states (DOS), tight optical energy localization, and low group velocity associated with SPP waves. The formation of bonding and anti-bonding SPP modes in metaldielectric-metal waveguides can also be conveniently explained in terms of different spatial arrangements of localized powerflow vortices between two metal interfaces. Finally, we investigate the underlying mechanisms of global topological transitions in metamaterials composed of multiple metal and dielectric films, i.e., transitions of their iso-
Uploads
Papers by Jonathan Tong