Perfect solution for precise flow throttling
The design of diaphragm valves allows them to be used in high-cycle applications without wear to their sealing surfaces. Because their open-to-close cycle is greater than 90 degrees, they can be used for more precise throttling than standard ball or butterfly valves. In the closed position, there is no entrapment of fluid within the valve body; this means that diaphragm valves are a good choice for volatile fluids that are off-gas or high purity applications where stagnation can lead to bacterial growth.
Diaphragm valves are available from 1/2” to 6” sizes in PVC, CPVC, ABS, PP, and PVDF and are the perfect solution when flow throttling is required, and dirty or volatile fluids are involved. The weir-style design — no dead space in the valve — is extremely good for abrasive slurries.
Industrial Diaphragm Valve Types
We engineer and manufacture our industrial offerings, including ABS diaphragm valves, to strict quality, performance, and dimensional standards. Our team designs each diaphragm valve series to meet specific demands, from OEM compact configurations to heavy-duty slurry lines, so you can select the right valve for the right job.
CM Series Compact Diaphragm Valve
The CM Series Compact Diaphragm Valve is purpose-built for OEM applications where space is limited, and performance cannot be compromised. Available in PVC and CPVC at 1/2″ and in PP and PVDF from 16 mm to 20 mm, it handles operating pressures up to 90 psi at 73°F. Our EPDM, FPM, and PTFE valve diaphragms offer broad chemical compatibility.
DK Series Dialock® Diaphragm Valve
The DK Series Dialock® is one of the most advanced thermoplastic diaphragm valves available, built around a patented locking mechanism that allows the handwheel to be set and locked in more than 300 distinct positions. Available in PVC, CPVC, PP, and PVDF from 1/2″ through 2-1/2″, it carries a 150 psi pressure rating and offers end connection options including spigot, true union (socket or threaded), and ANSI 150 flanged.
DKD Series Diaphragm Valve
The DKD Series is an ultra-compact, direct-acting pneumatic diaphragm valve built specifically for shutting off extremely dirty and highly viscous fluids. Its polypropylene actuator provides superior chemical resistance, and the EPDM liner is reinforced with textile fibers for added durability under pressure. Sized from 1/2″ diaphragm valves through 2″, with a 120 psi pressure rating, the DKD uses an optimized weir design that increases flow rate through improved internal geometry.
DV Series Diaphragm Valve
The DV Series is a rugged industrial diaphragm valve designed for throttling service and abrasive slurry lines, available from 1/2″ through 6″ with a 150 psi pressure rating. Its rising position indicator doubles as an adjustable travel stop, allowing operators to prevent over-compression of EPDM or PTFE diaphragms or to set a fixed “closed” position for repeatable flow control. As a 6″ diaphragm valve option, the DV Series fills a critical gap for large-diameter industrial process lines.
VM Series Diaphragm Valve
The VM Series Weir-Style Diaphragm Valve covers 3″ and 4″ sizes and has a 150 psi pressure rating at 73°F. Available in PVC, CPVC, PP, and PVDF with four body styles and three diaphragm choices (EPDM, FPM, and PTFE), it installs in any orientation and performs equally well in high-purity water systems and abrasive slurry lines. A proprietary PTFE diaphragm design sets the VM Series apart from standard offerings.
Diaphragm Valve Applications
IPEX industrial diaphragm valves serve numerous industries where corrosive media, abrasive slurries, high-purity requirements, or volatile fluids rule out standard metal valves. Common applications include:
- Water and Wastewater Treatment — Chlorine injection systems, alum and ferric chloride handling, aeration beds, and potable water systems benefit from the chemical resistance of PVC and CPVC diaphragm valves and the weir-style body’s ability to handle solids without trapping fluid.
- Metals and Mining — Aggressive acids, caustics, and abrasive slurries are routine in mineral processing. PVDF and PP diaphragm valves hold up where metal valves corrode or require constant maintenance.
- Aquarium and Marine Piping Systems — High-cycle, corrosion-resistant service with no contamination risk makes thermoplastic diaphragm valves the standard choice in large-scale aquarium and marine environments.
- Shipbuilding and Offshore — Saltwater exposure, tight spaces, and the need for lightweight components make our compact valve options ideal for shipboard and offshore installations.
- Pharmaceutical and High-Purity Applications — The weir-style design eliminates dead space, prevents stagnation, and minimizes particle generation during cycling, critical requirements in pharmaceutical manufacturing and ultrapure water systems.
- Chemical Processing and Industrial Piping — For facilities handling acids, caustics, and specialty chemicals, CPVC diaphragm valves and PVDF diaphragm valves offer the internal and external chemical resistance that metal valves cannot match without liners or coatings.
Why Thermoplastic Diaphragm Valves Belong in Your System
Engineers and facility managers accustomed to specifying metal valves often find that thermoplastic diaphragm valves decisively outperform their metal counterparts in corrosive or high-purity service. Here’s what puts thermoplastics in a different class for these applications:
- Full Chemical Resistance — Thermoplastics resist highly corrosive acids, caustics, and salts that would attack metal valve bodies and trim. Because thermoplastics are nonconductive, galvanic and electrolytic corrosion are nonissues. Biofilm, crystallization, and fouling are also less likely to adhere to smooth thermoplastic surfaces than to metal.
- Wide Temperature Range — Depending on material and configuration, thermoplastic diaphragm valves handle fluids from -40°F up to 248°F. PVC and CPVC diaphragm valves each have distinct temperature envelopes, while PVDF diaphragm valves extend performance further in high-temperature chemical service.
- Pressure Performance — IPEX industrial diaphragm valves are rated up to 250 psi at 73°F. As operating temperature rises, pressure ratings are derated, and we provide full pressure/temperature derating data so engineers can spec with accuracy.
- Easier Installation and Maintenance — Thermoplastic valves weigh significantly less than metal, requiring no specialized lifting equipment or installation tools. True union end connections on the CM, DK, and DKD Series allow in-line valve removal and replacement without cutting or disturbing adjacent piping.
- Availability and Replaceability — We stock thermoplastic diaphragm valves, so they’re readily available for replacement. Material options span the most common industrial thermoplastics, and we ensure that spare diaphragms across EPDM, FPM, and PTFE are easy to source and swap in the field.
Why Work with IPEX
IPEX is a North American thermoplastic pipe, valve, and fitting manufacturer with decades of application experience across industrial process piping, chemical handling, water treatment, and high-purity systems. Our diaphragm valves are part of a complete, integrated system, manufactured and engineered to the same dimensional and quality standards as our pipe and fittings, so you’re not mixing specifications or troubleshooting compatibility issues at commissioning.
As a diaphragm valve manufacturer with real application data behind every product recommendation, we go beyond catalog specs. Our in-field technical sales representatives and engineering services team provide the material selection and system design knowledge that helps facilities get it right the first time. Chemical resistance guides, pressure/temperature derating data, CAD and BIM files, installation guides, and technical manuals are all available through our resource library.
When your application involves corrosive fluids, abrasive slurries, or zero tolerance for contamination, the right valve material matters as much as the right valve type. Talk to an IPEX expert to identify the best diaphragm valve series, material, and configuration for your process.
Frequently Asked Questions About Diaphragm Valves
What is the difference between a weir-type and a straight-through (full-bore) diaphragm valve?
Weir-type diaphragm valves, which are what IPEX manufactures, use a raised saddle inside the valve body that the diaphragm presses against to stop flow. This design reduces the stroke distance required to open and close the valve, extends diaphragm life, and eliminates dead space where fluid could pool or bacteria could grow. Straight-through diaphragm valves have a flat body with no weir, allowing full-bore flow and easier passage of solids but requiring the diaphragm to travel farther with each cycle, which shortens its service life. For most industrial throttling, chemical, and high-purity applications, the weir-type design is preferred.
How often should a valve diaphragm be replaced?
Replacement intervals depend on the fluid being handled, operating pressure and temperature, cycle frequency, and the diaphragm material itself. In general, EPDM and FPM diaphragms in moderate-duty service may last several years, while diaphragms in high-cycle or chemically aggressive applications may need inspection annually or more frequently. A good practice is to inspect the diaphragm during scheduled maintenance shutdowns for signs of swelling, cracking, or deformation. Many facilities establish a preventive replacement schedule based on cycle count rather than calendar time.
Can diaphragm valves be automated, and what actuator types are compatible?
Yes. All series in our diaphragm valve lineup are actuator-capable or available with pneumatic actuation as a standard configuration option. Pneumatic actuators are the most common choice for industrial automation, and the DK Series Dialock® is available from the factory in double-acting, normally open, and normally closed pneumatic configurations. For applications requiring on/off automated shutoff or modulating flow control, pneumatic actuation paired with a positioner gives precise, repeatable results. Integrally molded mounting brackets on the VM, DK, and CM Series simplify actuator mounting and keep the installed assembly compact, an important consideration in tight panel or skid installations.
Product Types & Specifications
The CM Series Compact Diaphragm Valves have an efficient design and are ideal for OEMs. A variety of body and diaphragm materials plus the option of pneumatic actuation combine to make this valve the perfect choice for a wide range of applications.
specifications
- Size: 1/2″ in PVC and CPVC, 16 mm – 20 mm in PP and PVDF
- Pressure: up to 90 psi at 73°F
features & benefits
- Precise flow control
- High cycle life
- Excellent for abrasive slurries
- All bodies to be used with EPDM or Viton® diaphragms shall feature raised molded sealing rings (concentric), or with PTFE diaphragms shall be machined flat
- All manual valves shall have a rising position indicator
- Bodies of all sizes and materials shall have integral mounting brass inserts
product overview
The CM is a compact design with true union ends, available in PVC, CPVC, PP, or PVDF. With three diaphragm options (EPDM, FPM, or PTFE). These manually operated or pneumatically actuated valves are ideal for OEMs. The standard position indicator and integrated mounting bushings complete the long list of the CM Series Compact Diaphragm Valve features. These valves are a part of our complete systems of pipe, valves, and fittings, engineered and manufactured to our strict quality, performance, and dimensional standards.
They are widely used in high-purity applications because their design prevents friction and subsequent particle creation when cycling. All valves shall be weir-style for throttling applications. Many bodies and diaphragm material options are available as well as simple pneumatic actuation.
This valve can be found in applications such as:
- Aquarium Piping Systems
- Metals & Mining
- Shipbuilding and Offshore applications
- Water and wastewater treatment
The new DK series Dialock® diaphragm valves are available in PVC, CPVC, PP, or PVDF, with four body styles, and three choices of diaphragms (EPDM, FPM, or PTFE). They can be mounted in any position and it is an ideal solution for modulating flow in either very clean or abrasive slurry applications.
specifications
- Size: 1/2″ through 2-1/2″
- Pressure: 150 psi
- Body Material: PVC, CPVC, PP, PVDF
- Diaphragm: EPDM, FPM, or PTFE (EPDM Backed)
- Control Style: Manual – Handwheel, Pneumatic – Double Acting, Normally Open, Normally Closed
- End Connection: Spigot, True Union (Socket, Threaded), Flanged (ANSI 150)
- Dialock® Locking Mechanism: Allows the manual handwheel to be adjusted and locked in over 300 positions
features & benefits
- Graduated optical indicator
- Optimized fluid dynamic design (high Cv value)
- Dialock® handwheel
- Custom labeling plate
- Integrally molded mounting bracket
- Stroke limiter adjustment
- Floating pin connection
- Facilitates precise linear flow regulation
product overview
The new innovative and patented Dialock® locking mechanism allows the manual handwheel to be adjusted and locked in over 300 positions. The re-designed weir style body has significantly improved the DK’s flow rate compared to the other designs, and it facilitates precise linear flow regulation through the valve’s full range of operation. The new DK is available in manual and pneumatic control styles.
This valve can be found in applications such as:
- Aquarium Piping Systems
- Metals & Mining
- Shipbuilding and Offshore applications
- Water and wastewater treatment
The DKD Series diaphragm valve is an ultra-compact, direct acting pneumatic valve that is ideal for shutting off extremely dirty and highly viscous fluids.
Specifications
- Size: 1/2” through 2”
- Pressure:120 psi
featureS & BENEFITS
- Compact Polypropylene Actuator for superior chemical resistance
- EPDM liner Re-enforced with textile fibers
- Improved weir design and optimized flow performance
- Standard IPS connections
- True Union design for ease of replacement. Spigot design is also available
- The normally open design utilizes the line pressure to open the diaphragm and control pressure to close it. No spring required!
- Threaded Stainless Steel insert for wall mount applications
- Small body size and lightweight
product overview
The internal geometry of the body optimizes fluid dynamic efficiency by increasing the flow rate. The valve is comprised of three elements: the body, diaphragm, and sealing bonnet. When compressed air enters the bonnet, the diaphragm is pressed against the body’s weir, interrupting the flow. This simplified operating principle and the lower number of components guarantee high reliability and durability. The DKD Series Diaphragm Valves are part of our complete systems of pipe, valves, and fittings, engineered and manufactured to our strict quality, performance, and dimensional standards.
This valve can be found in applications such as:
- Aquarium Piping Systems
- Metals & Mining
- Shipbuilding and Offshore applications
- Water and wastewater treatment
Diaphragm valves are the perfect solution when precise flow throttling is required.
specifications
- Size: 1/2″ through 6″
- Pressure: 150 psi
FEATURES & BENEFITS
- Precise flow control
- High cycle life
- Excellent for abrasive slurries
product overview
The DV Series Diaphragm Valve is a rugged industrial product ideal for throttling or use in abrasive slurry lines. The raising position indicator also functions as an adjustable travel stop. This feature can be used to avoid over-compression of the EPDM or PTFE diaphragm or as a travel limiter allowing different settings for the “closed” position. The molded flanged body eliminates potentially leaky joints while featuring end-to-end dimensions identical to most plastic-lined metal diaphragm valves, allowing for direct replacement.
This valve can be found in applications such as:
- Aquarium Piping Systems
- Metals & Mining
- Shipbuilding and Offshore applications
- Water and wastewater treatment
The VM Series Diaphragm Valve is ideal for dirty or abrasive slurry applications and high-purity water. Diaphragm valves are the perfect solution when precise flow throttling is required, and for systems requiring a diaphragm valve over 2 ½”.
SPECIFICATIONS
- Size: 3″ and 4″ (1/2″ through 2-1/2″ replaced by the NEW DK Series Dialock® Diaphragm Valve) – Link
- Pressure: up to 150 psi at 73°F
features & benefits
- Precise flow control
- High cycle life
- Excellent for abrasive slurries
- Position indicator
- Proprietary PTFE diaphragm design
- Integrally molded mounting bracket
- Actuator capable
product overview
The VM Series Weir-Style Diaphragm Valves are available in PVC, CPVC, PP, or PVDF, with four body styles, and three choices of diaphragms (EPDM, FPM, or PTFE). Able to be mounted in any position, the VM Series is ideal for either very clean or abrasive slurry applications. A unique and proprietary PTFE diaphragm design, available automation, and multiple accessories make this one of the most advanced and versatile lines in the industry. IPEX diaphragm valves can be pneumatically actuated providing precise control of critical applications.
This valve can be found in applications such as:
- Aquarium Piping Systems
- Metals & Mining
- Shipbuilding and Offshore applications
- Water and wastewater treatment