algorithms are widely used in inverse synthetic aperture radar (ISAR) imaging. In the standard RD... more algorithms are widely used in inverse synthetic aperture radar (ISAR) imaging. In the standard RD algorithm, envelope alignment and autofocus are first applied to transform the original data into equivalent turntable target data, and then FFT is used for the image formation. Usually, the migration through resolution cells (MTRCs) due to target rotation is ignored. With the improvement of resolution or the increase of target size, MTRCs cannot be ignored and must be mitigated. For high speed moving targets, the most widely used 'stop-and-go' data model is violated. In this case, the mitigation of MTRCs becomes even more complicated. In the paper, technical issues associated with high resolution ISAR imaging of high speed moving targets are addressed. A preprocessing algorithm is first proposed to convert the non-coherent raw ISAR data into coherent data, then a keystone formatting algorithm developed for the imaging of slow ground moving targets in SAR is applied to mitigate the MTRCs owing to rotational motion, and, finally, a high resolution time -frequency analysis based range -instantaneous Doppler (RID) algorithm is used to produce the focused ISAR image. Numerical examples are provided to illustrate the performance of the proposed approach.
In recent years, ground moving target imaging in synthetic aperture radar (SAR) has attracted the... more In recent years, ground moving target imaging in synthetic aperture radar (SAR) has attracted the attention of many researchers all over the world. A novel approach is proposed for the ground moving target imaging and motion parameter estimation using single channel SAR. First, a second-order generalised keystone formatting method is used to compensate for the range curvature. Secondly, the estimated slope of the target echo's envelope is used for the range walk compensation. Thirdly, Doppler parameters of moving targets obtained via spectral analysis are used for the imaging and positioning of ground moving targets. Finally, motion parameters of moving targets can be estimated on the basis of the relationship between Doppler and motion parameters. Both numerical and experimental results are provided to demonstrate the performance of the proposed approach.
Surface Coatings International Part B-coatings Transactions, 2005
Precursor N-halamine siloxane monomers and polymers have been prepared for the purpose of functio... more Precursor N-halamine siloxane monomers and polymers have been prepared for the purpose of functionalising the surfaces of materials in order to render them biocidal upon exposure to oxidative halogen solutions. The biocidal function can be imparted to the N-halamine moiety either before or after siloxane bonding or adhesion to the surface or material. The biocidal surfaces and materials can then be used to inactivate pathogenic micro-organisms such as bacteria, fungi and yeasts, as well as virus particles, which can cause infectious diseases, and those micro-organisms which cause noxious odours and unpleasant colouring such as mildew. Examples of surfaces and materials which can be rendered biocidal with the N-halamine siloxanes include cellulose, synthetic fibres, ceramics, plastics, polyurethanes and metals. Preparation procedures and some biocidal efficacy data on paper, cotton and polyurethane paint are discussed. Des monomères et des polymères précurseurs à N-halamine siloxane ont été préparés afin de fonctionnaliser la surface des matériaux pour les rendre biocides quand ils sont exposés à des solutions oxydatives à l’halogène. L’addition de la fonction biocide au groupe caractéristique N-halamine peut précéder ou suivre la liaison du siloxane comme elle peut précéder ou suivre l’adhésion à la surface ou au matériau. Les surfaces biocides et les matériaux peuvent alors être utilisées pour inactiver des micro-organismes pathogéniques inactifs tels que les bactéries, les champignons, les levures, et les particules de virus, qui peuvent provoquer des maladies infectieuses, aussi bien que ces microorganismes, tels que la moisissure, qui créent des odeurs nocives et la coloration désagréable. Des exemples de surfaces et de matériaux qui peuvent être traités des N-halamine siloxanes pour les rendre biocides comprennent la cellulose, les fibres synthétiques, les céramiques, les plastiques, les polyuréthanes, et les métaux. Les procédés de préparation et quelques données dans le domaine de l’efficacité biocide sur le papier, le coton, et la peinture polyuréthane sont discutés. N-Halaminsiloxanmonomere und -polymere wurden darauf vorbereitel, duch die Aussetzung an oxidierende Halogenlösungen Oberflächen eine disinfizierende Wirkung zu verleihen. Die Biozid-Wirkung kann der N-Halaminhälfte entweder vor oder nach der Bildung der Siloxanverbindung oder nach Auftragung des Anstriches auf eine Oberfläche verliehen werden. Die Biozidwirkung der Oberfläche neutralisiert sowohl Pathogene wie Bakterien, Pilze, Hefen oder Viren, als auch geruchs- und fleckbildende Mikroorganismen wie Schimmelpilze. Zu den Oberflächen, die mit N-Halaminsiloxan-Biozidanstrichen behandelt werden können, gehören Zellulosen, Synthetik-Fasern, Keramik, Plastik, Polyurethane und Metalle. Wir legen ausserdem die Herstellungsmethoden und Daten zur Effektivität der Biozide auf Papier, Baumwolle und Polyurethananstrichen dar.
Surface Coatings International Part B-coatings Transactions, 2003
A novel N-halamine monomer has been prepared which can be copolymerised with a commercial water-b... more A novel N-halamine monomer has been prepared which can be copolymerised with a commercial water-borne acrylic polyol and a commercial isocyanate to produce a polyurethane coating which can be applied to a broad variety of surfaces. After curing, the coating can be chlorinated with a source of free chlorine, such as bleach, to render it biocidal. Once the coating loses its chlorine loading, and hence its biocidal activity, regeneration is possible by further exposure to free chlorine. In one experimental observation a coating on a wall retained its biocidal activity for more than six months. The biocidal coating should have many applications, for example, in medical facilities, in food preparation areas, in the prevention of biofouling in aqueous and humid environments, etc. Un nouveau monomère à la n-halamine a été préparé qui peut être copolymérisé avec un polyol acrylique hydrodiluable commercial et un isocyanate commercial afin de produire un revêtement polyuréthanique qui peut être appliqué à une large variété de surfaces. Après séchage le revêtement peut être chloré en utilisant une source de chlore libre, telle que l’eau de Javel, pour le rendre biocide. Une fois que le revêtement perd sa charge de chlore, et donc son activité biocide, la régénération est possible par le moyen d’une autre exposition au chlore libre. Au cours d’une certaine observation d’expérience on a noté que le revêtement d’un mur a retenu son activité biocide pendant plus de six mois. Le revêtement biocide devrait avoir de nombreuses applications, par example, dans les établissements médicaux, dans les lieux de préparation des produits alimentaires, dans le domaine de la prévention de la biocontamination des environnements humides ou aqueux, etc. Wir haben einen neuartigen N-Balaminmonomer hergestellt, der durch ein handelsübliches acrylisches Polyol und ein Isocyanat copolymerisiert werden kann. Der so erhaltene Lack kann auf eine weite Reihe von Oberflächen aufgetragen werden. Nach dem Härteprozess kann der Lack mit einem Produzenten von freiem Chlor wie Bleiche chloriniert werden, um die Biozidwirkung zu aktivieren. Da der Lack mit der Zeit seinen Chlorgehalt verliert und damit seine Wirkungskraft, kann diese Behandlung kann nach Bedarf wiederholt werden. Eines unserer Experimente zeigte dass der Lack seine Biozidwirkung für über sechs Monate beibehalten kann. Dieser Biozidlack dürfte vielfältig Anwendung finden, z. B. in Krankenhäusern, Küchen, zum Verhindern von Pilzbefall in feuchten Räumen und so weiter.
Surface Coatings International Part B-coatings Transactions, 2005
Antimicrobial coatings on a wide variety of hard and soft substrates were prepared by exposing su... more Antimicrobial coatings on a wide variety of hard and soft substrates were prepared by exposing surfaces treated with novel N-halamine siloxane precursor monomers and macro-monomers to oxidative halogen solutions. Suspensions of a range of bacterial, viral, fungal and yeast micro-organisms were applied to the halogen-charged coatings for defined intervals, before recovery and quantification of surviving microbes using appropriate neutralisation and culture techniques. The biocidal surfaces exhibited powerful, broad-spectrum antimicrobial properties, inactivating most challenge microbes in contact times measured in minutes to hours, rather than the extended contact incubation periods usually associated with substrate-bound antimicrobial agents. Antimicrobial effects were also demonstrated to prevent odour caused by bacterial generation of ammonia in an experimental simulation of a urine-soaked nappy pad. Contact times for efficacy were related to bound halogen concentrations per unit of surface area. Potential benefits of these novel rechargeable biocidal surfaces cover a range, from limiting contamination of environmental surfaces with disease agents in healthcare or food service facilities, to controlling odour and mildew in bathrooms, and preventing odour formation in incontinence pads. They also confer antimicrobial protective functions on textiles and non-woven filter media for air and water. On a préparé des revêtements antimicrobiens qui étaient appliqués à une large variété de substrats durs et mous. Cómme préparation, des surfaces traitées à de nouveaux monomères précurseurs n-halamine siloxane et à des macro-monomères ont été exposées à des solutions d’halogène oxydatif. Des suspensions d’une gamme de levures et de micro-organismes bactériens, viraux et fongiques étaient appliquées aux revêtements chargés d’halogène pendant des périodes définies avant d’être récupérées et soumises à une quantification des microbes survivants grâce à des techniques de culture et de neutralisation appropriées. Les surfaces biocides ont montré de puissantes propriétés anti-microbiennes à large spectre, désactivant la plupart des microbes « de challeng» au cours des temps de contact qui duraient des minutes ou des heures. Il ne s’agissait pas des temps de contact/incubation prolongés qui sont d’habitude associés aux agents antimicrobiens liés au substrat. Aussi, au cours d’une simulation expérimentale d’une couche trempée d’urine, on a fait preuve des effets antimicrobiens dans le domaine de la prévention de l’odeur dû à la génération de l’ammoniac par des bactéries. Les temps de contact nécessaire pour garantir l’efficacité étaient associés aux concentrations de l’halogène lié par unité de superficie. Les avantages éventuels des ces nouvelles surfaces biocides rechargeables présentent toute une gamme de possibilités, de la limitation de la contamination des surfaces environnementales par des agents causaux de maladie dans le domaine des soins de la santé et des services alimentaires, jusqu’au contrôle des odeurs et de la moisissure dans la salle de bains et la prévention de la formation d’odeur dans les couches d’incontinence. Elles pourvoient aussi les textiles et les médias non-tissés de filtration de fonctions protectrices antimicrobiennes. Wir trugen antimikrobielle Beschichtungen auf eine Reihe von harten und weichen Substraten auf, die mit einem neuartigen n-Halamin Siloxanmonomer und Makromonomeren vorbehandelt worden waren und dann oxidierenden Halogenlösungen ausgesetzt wurden. Wir trugen dann mehrere Suspensionen von Bakterien, Viren, Pilzen und Hefepilzen auf die Halogen-behandelten Substrate auf, und überprüften die antimikrobielle Wirkung durch Neutralisation und Kultivierung der überlebenden Organismen. Die Biozid-behandelten Oberflächen zeigten eine starke und breite antimikrobielle Wirkung, und neutraliserten auch hartnäckige Mikroben innerhalb von Minuten oder Stunden statt den langen Kontaktzeiten die normalerweise bei antimikrobiellen Oberflächen nötig sind. Der antimikrobielle Effekt verhinderte auch die Bildung von Gerüchen durch die bakterielle Herstellung von Ammoniak in einer experimentellen Simulation einer Urin-durchnäßten Windel. Die effektive Kontaktzeit ergab sich aus dem Verhältnis von gebundenen Halogenen zur Oberfläche. Diese neuartigen erneuerbaren antimikrobiellen Oberflächen haben viele mögliche Anwendungen, von der Verminderung des Mikrobenbefalls in der Krankenhausern und in der Lebensmittelherstellung zur Kontrolle von Geruch und Schimmelpilzen in Badezimmern, und zur Verhinderung der Geruchsbildung in Windeln und Inkontinenzpads. Die Biozide waren auch auf Textilien und Luft- und Wasserfiltern wirksam.
algorithms are widely used in inverse synthetic aperture radar (ISAR) imaging. In the standard RD... more algorithms are widely used in inverse synthetic aperture radar (ISAR) imaging. In the standard RD algorithm, envelope alignment and autofocus are first applied to transform the original data into equivalent turntable target data, and then FFT is used for the image formation. Usually, the migration through resolution cells (MTRCs) due to target rotation is ignored. With the improvement of resolution or the increase of target size, MTRCs cannot be ignored and must be mitigated. For high speed moving targets, the most widely used 'stop-and-go' data model is violated. In this case, the mitigation of MTRCs becomes even more complicated. In the paper, technical issues associated with high resolution ISAR imaging of high speed moving targets are addressed. A preprocessing algorithm is first proposed to convert the non-coherent raw ISAR data into coherent data, then a keystone formatting algorithm developed for the imaging of slow ground moving targets in SAR is applied to mitigate the MTRCs owing to rotational motion, and, finally, a high resolution time -frequency analysis based range -instantaneous Doppler (RID) algorithm is used to produce the focused ISAR image. Numerical examples are provided to illustrate the performance of the proposed approach.
In recent years, ground moving target imaging in synthetic aperture radar (SAR) has attracted the... more In recent years, ground moving target imaging in synthetic aperture radar (SAR) has attracted the attention of many researchers all over the world. A novel approach is proposed for the ground moving target imaging and motion parameter estimation using single channel SAR. First, a second-order generalised keystone formatting method is used to compensate for the range curvature. Secondly, the estimated slope of the target echo's envelope is used for the range walk compensation. Thirdly, Doppler parameters of moving targets obtained via spectral analysis are used for the imaging and positioning of ground moving targets. Finally, motion parameters of moving targets can be estimated on the basis of the relationship between Doppler and motion parameters. Both numerical and experimental results are provided to demonstrate the performance of the proposed approach.
Surface Coatings International Part B-coatings Transactions, 2005
Precursor N-halamine siloxane monomers and polymers have been prepared for the purpose of functio... more Precursor N-halamine siloxane monomers and polymers have been prepared for the purpose of functionalising the surfaces of materials in order to render them biocidal upon exposure to oxidative halogen solutions. The biocidal function can be imparted to the N-halamine moiety either before or after siloxane bonding or adhesion to the surface or material. The biocidal surfaces and materials can then be used to inactivate pathogenic micro-organisms such as bacteria, fungi and yeasts, as well as virus particles, which can cause infectious diseases, and those micro-organisms which cause noxious odours and unpleasant colouring such as mildew. Examples of surfaces and materials which can be rendered biocidal with the N-halamine siloxanes include cellulose, synthetic fibres, ceramics, plastics, polyurethanes and metals. Preparation procedures and some biocidal efficacy data on paper, cotton and polyurethane paint are discussed. Des monomères et des polymères précurseurs à N-halamine siloxane ont été préparés afin de fonctionnaliser la surface des matériaux pour les rendre biocides quand ils sont exposés à des solutions oxydatives à l’halogène. L’addition de la fonction biocide au groupe caractéristique N-halamine peut précéder ou suivre la liaison du siloxane comme elle peut précéder ou suivre l’adhésion à la surface ou au matériau. Les surfaces biocides et les matériaux peuvent alors être utilisées pour inactiver des micro-organismes pathogéniques inactifs tels que les bactéries, les champignons, les levures, et les particules de virus, qui peuvent provoquer des maladies infectieuses, aussi bien que ces microorganismes, tels que la moisissure, qui créent des odeurs nocives et la coloration désagréable. Des exemples de surfaces et de matériaux qui peuvent être traités des N-halamine siloxanes pour les rendre biocides comprennent la cellulose, les fibres synthétiques, les céramiques, les plastiques, les polyuréthanes, et les métaux. Les procédés de préparation et quelques données dans le domaine de l’efficacité biocide sur le papier, le coton, et la peinture polyuréthane sont discutés. N-Halaminsiloxanmonomere und -polymere wurden darauf vorbereitel, duch die Aussetzung an oxidierende Halogenlösungen Oberflächen eine disinfizierende Wirkung zu verleihen. Die Biozid-Wirkung kann der N-Halaminhälfte entweder vor oder nach der Bildung der Siloxanverbindung oder nach Auftragung des Anstriches auf eine Oberfläche verliehen werden. Die Biozidwirkung der Oberfläche neutralisiert sowohl Pathogene wie Bakterien, Pilze, Hefen oder Viren, als auch geruchs- und fleckbildende Mikroorganismen wie Schimmelpilze. Zu den Oberflächen, die mit N-Halaminsiloxan-Biozidanstrichen behandelt werden können, gehören Zellulosen, Synthetik-Fasern, Keramik, Plastik, Polyurethane und Metalle. Wir legen ausserdem die Herstellungsmethoden und Daten zur Effektivität der Biozide auf Papier, Baumwolle und Polyurethananstrichen dar.
Surface Coatings International Part B-coatings Transactions, 2003
A novel N-halamine monomer has been prepared which can be copolymerised with a commercial water-b... more A novel N-halamine monomer has been prepared which can be copolymerised with a commercial water-borne acrylic polyol and a commercial isocyanate to produce a polyurethane coating which can be applied to a broad variety of surfaces. After curing, the coating can be chlorinated with a source of free chlorine, such as bleach, to render it biocidal. Once the coating loses its chlorine loading, and hence its biocidal activity, regeneration is possible by further exposure to free chlorine. In one experimental observation a coating on a wall retained its biocidal activity for more than six months. The biocidal coating should have many applications, for example, in medical facilities, in food preparation areas, in the prevention of biofouling in aqueous and humid environments, etc. Un nouveau monomère à la n-halamine a été préparé qui peut être copolymérisé avec un polyol acrylique hydrodiluable commercial et un isocyanate commercial afin de produire un revêtement polyuréthanique qui peut être appliqué à une large variété de surfaces. Après séchage le revêtement peut être chloré en utilisant une source de chlore libre, telle que l’eau de Javel, pour le rendre biocide. Une fois que le revêtement perd sa charge de chlore, et donc son activité biocide, la régénération est possible par le moyen d’une autre exposition au chlore libre. Au cours d’une certaine observation d’expérience on a noté que le revêtement d’un mur a retenu son activité biocide pendant plus de six mois. Le revêtement biocide devrait avoir de nombreuses applications, par example, dans les établissements médicaux, dans les lieux de préparation des produits alimentaires, dans le domaine de la prévention de la biocontamination des environnements humides ou aqueux, etc. Wir haben einen neuartigen N-Balaminmonomer hergestellt, der durch ein handelsübliches acrylisches Polyol und ein Isocyanat copolymerisiert werden kann. Der so erhaltene Lack kann auf eine weite Reihe von Oberflächen aufgetragen werden. Nach dem Härteprozess kann der Lack mit einem Produzenten von freiem Chlor wie Bleiche chloriniert werden, um die Biozidwirkung zu aktivieren. Da der Lack mit der Zeit seinen Chlorgehalt verliert und damit seine Wirkungskraft, kann diese Behandlung kann nach Bedarf wiederholt werden. Eines unserer Experimente zeigte dass der Lack seine Biozidwirkung für über sechs Monate beibehalten kann. Dieser Biozidlack dürfte vielfältig Anwendung finden, z. B. in Krankenhäusern, Küchen, zum Verhindern von Pilzbefall in feuchten Räumen und so weiter.
Surface Coatings International Part B-coatings Transactions, 2005
Antimicrobial coatings on a wide variety of hard and soft substrates were prepared by exposing su... more Antimicrobial coatings on a wide variety of hard and soft substrates were prepared by exposing surfaces treated with novel N-halamine siloxane precursor monomers and macro-monomers to oxidative halogen solutions. Suspensions of a range of bacterial, viral, fungal and yeast micro-organisms were applied to the halogen-charged coatings for defined intervals, before recovery and quantification of surviving microbes using appropriate neutralisation and culture techniques. The biocidal surfaces exhibited powerful, broad-spectrum antimicrobial properties, inactivating most challenge microbes in contact times measured in minutes to hours, rather than the extended contact incubation periods usually associated with substrate-bound antimicrobial agents. Antimicrobial effects were also demonstrated to prevent odour caused by bacterial generation of ammonia in an experimental simulation of a urine-soaked nappy pad. Contact times for efficacy were related to bound halogen concentrations per unit of surface area. Potential benefits of these novel rechargeable biocidal surfaces cover a range, from limiting contamination of environmental surfaces with disease agents in healthcare or food service facilities, to controlling odour and mildew in bathrooms, and preventing odour formation in incontinence pads. They also confer antimicrobial protective functions on textiles and non-woven filter media for air and water. On a préparé des revêtements antimicrobiens qui étaient appliqués à une large variété de substrats durs et mous. Cómme préparation, des surfaces traitées à de nouveaux monomères précurseurs n-halamine siloxane et à des macro-monomères ont été exposées à des solutions d’halogène oxydatif. Des suspensions d’une gamme de levures et de micro-organismes bactériens, viraux et fongiques étaient appliquées aux revêtements chargés d’halogène pendant des périodes définies avant d’être récupérées et soumises à une quantification des microbes survivants grâce à des techniques de culture et de neutralisation appropriées. Les surfaces biocides ont montré de puissantes propriétés anti-microbiennes à large spectre, désactivant la plupart des microbes « de challeng» au cours des temps de contact qui duraient des minutes ou des heures. Il ne s’agissait pas des temps de contact/incubation prolongés qui sont d’habitude associés aux agents antimicrobiens liés au substrat. Aussi, au cours d’une simulation expérimentale d’une couche trempée d’urine, on a fait preuve des effets antimicrobiens dans le domaine de la prévention de l’odeur dû à la génération de l’ammoniac par des bactéries. Les temps de contact nécessaire pour garantir l’efficacité étaient associés aux concentrations de l’halogène lié par unité de superficie. Les avantages éventuels des ces nouvelles surfaces biocides rechargeables présentent toute une gamme de possibilités, de la limitation de la contamination des surfaces environnementales par des agents causaux de maladie dans le domaine des soins de la santé et des services alimentaires, jusqu’au contrôle des odeurs et de la moisissure dans la salle de bains et la prévention de la formation d’odeur dans les couches d’incontinence. Elles pourvoient aussi les textiles et les médias non-tissés de filtration de fonctions protectrices antimicrobiennes. Wir trugen antimikrobielle Beschichtungen auf eine Reihe von harten und weichen Substraten auf, die mit einem neuartigen n-Halamin Siloxanmonomer und Makromonomeren vorbehandelt worden waren und dann oxidierenden Halogenlösungen ausgesetzt wurden. Wir trugen dann mehrere Suspensionen von Bakterien, Viren, Pilzen und Hefepilzen auf die Halogen-behandelten Substrate auf, und überprüften die antimikrobielle Wirkung durch Neutralisation und Kultivierung der überlebenden Organismen. Die Biozid-behandelten Oberflächen zeigten eine starke und breite antimikrobielle Wirkung, und neutraliserten auch hartnäckige Mikroben innerhalb von Minuten oder Stunden statt den langen Kontaktzeiten die normalerweise bei antimikrobiellen Oberflächen nötig sind. Der antimikrobielle Effekt verhinderte auch die Bildung von Gerüchen durch die bakterielle Herstellung von Ammoniak in einer experimentellen Simulation einer Urin-durchnäßten Windel. Die effektive Kontaktzeit ergab sich aus dem Verhältnis von gebundenen Halogenen zur Oberfläche. Diese neuartigen erneuerbaren antimikrobiellen Oberflächen haben viele mögliche Anwendungen, von der Verminderung des Mikrobenbefalls in der Krankenhausern und in der Lebensmittelherstellung zur Kontrolle von Geruch und Schimmelpilzen in Badezimmern, und zur Verhinderung der Geruchsbildung in Windeln und Inkontinenzpads. Die Biozide waren auch auf Textilien und Luft- und Wasserfiltern wirksam.
Uploads
Papers by Robert Wu