Ionic polymer metal composites (IPMCs) are a class of materials with a rising appeal in biologica... more Ionic polymer metal composites (IPMCs) are a class of materials with a rising appeal in biological micro-electromechanical systems (bio-MEMS) due to their unique properties (low voltage output, bio-compatibility, affinity with ionic medium). While tailoring and improving actuation capabilities of IPMCs is a key motivator in almost all IPMC manufacturing reports, very little efforts have been dedicated to sensing using IPMC thinner than 100 µm. Most reports on IPMC manufacturing and utilization rely on 180 µm-thick Nafion with platinum electrodes, too stiff for bio-MEMS applications. The same fabrication process on thinner membranes does yield in very poor electrodes and performance, and needs to be studied to increase flexibility and sensitivity in the microscale range. This study demonstrates an electroless Pt deposition method for fabricating bio-MEMS-suitable 50 µm-thick IPMC samples. First, we perform a comparative study on the platinum distribution within the Nafion backbone as...
2020 3rd IEEE International Conference on Soft Robotics (RoboSoft)
Organ-on-chip (OoC) devices are in rising demand for high-throughput and low-cost development and... more Organ-on-chip (OoC) devices are in rising demand for high-throughput and low-cost development and toxicological screening of chemicals and pharmaceuticals, as they accurately mimic in vitro physiological conditions as in the human body. In particular, OoCs are urgently needed for screening cardiovascular drug toxicity. Physiological relevance of cardiovascular cell cultures requires moving substrates. To date cell culture substrates have been commonly actuated by pneumatic systems, which are bulky, expensive and nonuser-friendly, and may thus limit the adoption of OoCs by researchers and industry. In this paper we propose the first actuating and sensing smart material-based OoC device and demonstrate its functionality by culturing human vascular smooth muscle cells (vSMC). Our device utilizes a single ionic polymer metal composite (IPMC)-based transducer to provide both actuation and sensing. The soft IPMC substrate allows to intermittently apply cyclic loading to tissues and to sense their spontaneous contractions. We integrated the transducer within a compact, easy-to-operate, economically affordable and scalable OoC prototype, which achieves an actuation range of 0.2 mm and 0.72 V/mm sensing resolution. The 0.1 % strain induced by actuation on cells accurately corresponds to in vivo strains for vSMCs. We successfully grew vSMCs on the IPMC substrate, and actuated them for 150 min at 1 Hz. Fluorescent staining showed no evidence of adverse effects. These results are a major step towards versatile OoCs for a wide variety of biological modelling of human tissues.
2021 21st International Conference on Solid-State Sensors, Actuators and Microsystems (Transducers), 2021
Stemming from the convergence of tissue engineering and microfluidics, organ-on-chip (OoC) techno... more Stemming from the convergence of tissue engineering and microfluidics, organ-on-chip (OoC) technology can reproduce in vivo-like dynamic microphysiological environments for tissues in vitro. The possibility afforded by OoC devices of realistic recapitulation of tissue and organ (patho)physiology may hold the key to bridge the current translational gap in drug development, and possibly foster personalized medicine. Here we underline the biotechnological convergence at the root of OoC technology, and outline research tracks under development in our group at TU Delft along two main directions: fabrication of innovative microelectromechanical OoC devices, integrating stimulation and sensing of tissue activity, and their embedding within advanced platforms for pre-clinical research. We conclude with remarks on the role of open technology platforms for the broader establishment of OoC technology in pre-clinical research and drug development.
Organ-on-a-chip (OoC) and microfluidic devices are conventionally produced using microfabrication... more Organ-on-a-chip (OoC) and microfluidic devices are conventionally produced using microfabrication procedures that require cleanrooms, silicon wafers, and photomasks. The prototyping stage often requires multiple iterations of design steps. A simplified prototyping process could therefore offer major advantages. Here, we describe a rapid and cleanroom-free microfabrication method using maskless photolithography. The approach utilizes a commercial digital micromirror device (DMD)-based setup using 375 nm UV light for backside exposure of an epoxy-based negative photoresist (SU-8) on glass coverslips. We show that microstructures of various geometries and dimensions, microgrooves, and microchannels of different heights can be fabricated. New SU-8 molds and soft lithography-based polydimethylsiloxane (PDMS) chips can thus be produced within hours. We further show that backside UV exposure and grayscale photolithography allow structures of different heights or structures with height grad...
Ionic polymer metal composites (IPMCs) are a class of materials with a rising appeal in biologica... more Ionic polymer metal composites (IPMCs) are a class of materials with a rising appeal in biological micro-electromechanical systems (bio-MEMS) due to their unique properties (low voltage output, bio-compatibility, affinity with ionic medium). While tailoring and improving actuation capabilities of IPMCs is a key motivator in almost all IPMC manufacturing reports, very little efforts have been dedicated to sensing using IPMC thinner than 100 µm. Most reports on IPMC manufacturing and utilization rely on 180 µm-thick Nafion with platinum electrodes, too stiff for bio-MEMS applications. The same fabrication process on thinner membranes does yield in very poor electrodes and performance, and needs to be studied to increase flexibility and sensitivity in the microscale range. This study demonstrates an electroless Pt deposition method for fabricating bio-MEMS-suitable 50 µm-thick IPMC samples. First, we perform a comparative study on the platinum distribution within the Nafion backbone as...
2020 3rd IEEE International Conference on Soft Robotics (RoboSoft)
Organ-on-chip (OoC) devices are in rising demand for high-throughput and low-cost development and... more Organ-on-chip (OoC) devices are in rising demand for high-throughput and low-cost development and toxicological screening of chemicals and pharmaceuticals, as they accurately mimic in vitro physiological conditions as in the human body. In particular, OoCs are urgently needed for screening cardiovascular drug toxicity. Physiological relevance of cardiovascular cell cultures requires moving substrates. To date cell culture substrates have been commonly actuated by pneumatic systems, which are bulky, expensive and nonuser-friendly, and may thus limit the adoption of OoCs by researchers and industry. In this paper we propose the first actuating and sensing smart material-based OoC device and demonstrate its functionality by culturing human vascular smooth muscle cells (vSMC). Our device utilizes a single ionic polymer metal composite (IPMC)-based transducer to provide both actuation and sensing. The soft IPMC substrate allows to intermittently apply cyclic loading to tissues and to sense their spontaneous contractions. We integrated the transducer within a compact, easy-to-operate, economically affordable and scalable OoC prototype, which achieves an actuation range of 0.2 mm and 0.72 V/mm sensing resolution. The 0.1 % strain induced by actuation on cells accurately corresponds to in vivo strains for vSMCs. We successfully grew vSMCs on the IPMC substrate, and actuated them for 150 min at 1 Hz. Fluorescent staining showed no evidence of adverse effects. These results are a major step towards versatile OoCs for a wide variety of biological modelling of human tissues.
2021 21st International Conference on Solid-State Sensors, Actuators and Microsystems (Transducers), 2021
Stemming from the convergence of tissue engineering and microfluidics, organ-on-chip (OoC) techno... more Stemming from the convergence of tissue engineering and microfluidics, organ-on-chip (OoC) technology can reproduce in vivo-like dynamic microphysiological environments for tissues in vitro. The possibility afforded by OoC devices of realistic recapitulation of tissue and organ (patho)physiology may hold the key to bridge the current translational gap in drug development, and possibly foster personalized medicine. Here we underline the biotechnological convergence at the root of OoC technology, and outline research tracks under development in our group at TU Delft along two main directions: fabrication of innovative microelectromechanical OoC devices, integrating stimulation and sensing of tissue activity, and their embedding within advanced platforms for pre-clinical research. We conclude with remarks on the role of open technology platforms for the broader establishment of OoC technology in pre-clinical research and drug development.
Organ-on-a-chip (OoC) and microfluidic devices are conventionally produced using microfabrication... more Organ-on-a-chip (OoC) and microfluidic devices are conventionally produced using microfabrication procedures that require cleanrooms, silicon wafers, and photomasks. The prototyping stage often requires multiple iterations of design steps. A simplified prototyping process could therefore offer major advantages. Here, we describe a rapid and cleanroom-free microfabrication method using maskless photolithography. The approach utilizes a commercial digital micromirror device (DMD)-based setup using 375 nm UV light for backside exposure of an epoxy-based negative photoresist (SU-8) on glass coverslips. We show that microstructures of various geometries and dimensions, microgrooves, and microchannels of different heights can be fabricated. New SU-8 molds and soft lithography-based polydimethylsiloxane (PDMS) chips can thus be produced within hours. We further show that backside UV exposure and grayscale photolithography allow structures of different heights or structures with height grad...
Uploads
Papers by Paul Ragot