Papers by Kittisak Jantanasakulwong
Plants
In Thai folklore wisdom, shallot (Allium ascalonicum L.) was applied as a traditional herbal medi... more In Thai folklore wisdom, shallot (Allium ascalonicum L.) was applied as a traditional herbal medicine for hair growth promotion with no scientific evidence. Androgenetic alopecia (AGA) is a progressive hair loss caused by multiple factors, including androgen hormones, inflammation, and oxidative stress. Conventional medicines (finasteride, dutasteride, corticosteroids, and minoxidil) have been used with limited therapeutic efficacy and unpleasant side effects. In this study, we aimed to give the first estimation of bioactive compounds in shallot extract and evaluate the hair growth-promoting activities regarding anti-inflammatory and gene expression modulation involving androgen, Wnt/β-catenin, sonic hedgehog, and angiogenesis pathways. The results reveal that phenolic compounds (quercetin, rosmarinic, and p-coumaric acids) are the major constituents of the methanolic shallot extract. Compared with the lipopolysaccharide-stimulated control group (2.68 ± 0.13 µM), nitric oxide produc...
Biology
Sperm sexing technique is favored in the dairy industry. This research focuses on the efficiency ... more Sperm sexing technique is favored in the dairy industry. This research focuses on the efficiency of bovine sperm sexing using magnetic-activated cell sorting (MACS) by scFv antibody against Y-chromosome-bearing sperm (Y-scFv) coupled to magnetic microbeads and its effects on kinematic variables, sperm quality, and X/Y-sperm ratio. In this study, the optimal concentration of Y-scFv antibody coupling to the surface of magnetic microbeads was 2–4 mg/mL. PY-microbeads revealed significantly enriched Y-chromosome-bearing sperm (Y-sperm) in the eluted fraction (78.01–81.43%) and X-chromosome-bearing sperm (X-sperm) in the supernatant fraction (79.04–82.65%). The quality of frozen–thawed sexed sperm was analyzed by CASA and imaging flow cytometer, which showed that PY-microbeads did not have a negative effect on X-sperm motility, viability, or acrosome integrity. However, sexed Y-sperm had significantly decreased motility and viability. The X/Y-sperm ratio was determined using an imaging f...
Foods, 2022
This study was conducted to find out the effects of perilla cake (PC) supplementation in a low-ly... more This study was conducted to find out the effects of perilla cake (PC) supplementation in a low-lysine diet on Thai crossbred finishing pigs’ productivity, carcass and meat quality, and fatty acid composition. For six weeks, a total of 21 barrows of finishing pigs were fed with three dietary treatments (T1: basal diet, T2: 2.5 percent PC supplementation in a low-lysine diet, and T3: 4.5 percent PC supplementation in a low-lysine diet). The results show that the intramuscular fat and marbling score was significantly increased by T2 and T3. On the other hand, it was found that the boiling loss and shear force value were significantly decreased by T2 and T3 (p < 0.05). In a low-lysine diet, dietary PC supplementation caused a significant increase in malondialdehyde levels in meat (p < 0.05) compared with the basal diet. It was also shown that alpha-linolenic acid level in backfat and the longissimus thoracis et lumborum muscle was increased considerably by T2 and T3. Therefore, su...
Polymers, 2022
Poly(lactic acid) was melt-blended with epoxy resin without hardener and chitosan (CTS) to prepar... more Poly(lactic acid) was melt-blended with epoxy resin without hardener and chitosan (CTS) to prepare modified PLA (PLAEC). Epoxy resin 5% and CTS 1–20% (wt/wt) were incorporated into PLA during melt mixing. PLAEC was melt-blended with an epoxidized natural rubber (ENR) 80/20 wt. The PLAEC CTS 1% blended with ENR (PLAEC1/ENR) showed a high tensile strength (30 MPa) and elongation at break (7%). The annealing process at 80 °C for 0–15 min maintained a tensile strength of approximately 30 MPa. SEM images of the PLAE/ENR blend showed phase inversion from co-continuous to ENR particle dispersion in the PLA matrix with the addition of CTS, whereas the annealing time reduced the hole sizes of the extracted ENR phase due to the shrinkage of PLA by crystallization. Thermal properties were observed by DSC and a Vicat softening test. The annealing process increased the crystallinity and Vicat softening temperature of the PLAEC1/ENR blend. Reactions of −COOH/epoxy groups and epoxy/−NH2 groups occ...
Molecules, 2022
Oily skin from overactive sebaceous glands affects self-confidence and personality. There is repo... more Oily skin from overactive sebaceous glands affects self-confidence and personality. There is report of an association between steroid 5-alpha reductase gene (SRD5A) expression and facial sebum production. There is no study of the effect of Asparagus racemosus Willd. root extract on the regulation of SRD5A mRNA expression and anti-sebum efficacy. This study extracted A. racemosus using the supercritical carbon dioxide fluid technique with ethanol and investigated its biological compounds and activities. The A. racemosus root extract had a high content of polyphenolic compounds, including quercetin, naringenin, and p-coumaric acid, and DPPH scavenging activity comparable to that of the standard L-ascorbic acid. A. racemosus root extract showed not only a significant reduction in SRD5A1 and SRD5A2 mRNA expression by about 45.45% and 90.86%, respectively, but also a reduction in the in vivo anti-sebum efficacy in male volunteers, with significantly superior percentage changes in facial ...
Pharmaceutics, 2022
With the ability to fabricate personalized dosage forms and considerably shorter manufacturing ti... more With the ability to fabricate personalized dosage forms and considerably shorter manufacturing time, semisolid extrusion (SSE) 3D printing has rapidly grown in popularity in recent years as a novel, versatile manufacturing method that powers a wide range of applications in the pharmaceutical field. In this work, the feasibility of using SSE 3D printing to fabricate fast-disintegrating tablets (FDTs) that are pre-filled in dosing syringes was evaluated. The novel design approach, ‘tablet-in-syringe’, was aimed to ease the oral drug administration and improve the dosing accuracy for dysphagic patients. The effect of varying polymer (hydroxypropyl methylcellulose E15) concentrations and printing parameters (e.g., extrusion rate) on dimensional accuracy, physicochemical properties, disintegration time, and content uniformity of 3D-printed FDTs was studied. An overall comparison of results demonstrated that the best FDT formulation among those developed was with a polymer:drug ratio (w/w...
Polymers, 2022
Carboxymethyl chitosan (CMCH) from native chitosan of high molecular weight (H, 310–375 kDa) was ... more Carboxymethyl chitosan (CMCH) from native chitosan of high molecular weight (H, 310–375 kDa) was synthesized for improving water solubility. The water solubility of high-molecular-weight carboxymethyl chitosan (H-CMCH) was higher than that of native chitosan by 89%. The application of H-CMCH as enhancing the moisturizer in mangosteen extract deodorant cream was evaluated. Different concentrations of H-CMCH (0.5–2.5%) were investigated in physicochemical characteristics of creams, including appearance, phase separation, pH, and viscosity, by an accelerated stability test. The different degrees of skin moisturizing (DM) on pig skin after applying H-CMCH solution, compared with untreated skin, water, and propylene glycol for 15 and 30 min using a Corneometer®, were investigated. The results showed that the 0.5% H-CMCH provided the best DM after applying the solution on pig skin for 30 min. Trans-2-nonenal, as an unsatisfied odor component, was also evaluated against components of the m...
Molecules, 2022
Carboxymethyl rice starch films were prepared from carboxymethyl rice starch (CMSr) treated with ... more Carboxymethyl rice starch films were prepared from carboxymethyl rice starch (CMSr) treated with sodium hydroxide (NaOH) at 10–50% w/v. The objective of this research was to determine the effect of NaOH concentrations on morphology, mechanical properties, and water barrier properties of the CMSr films. The degree of substitution (DS) and morphology of native rice starch and CMSr powders were examined. Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and differential scanning calorimetry (DSC) were used to investigate the chemical structure, crystallinity, and thermal properties of the CMSr films. As the NaOH concentrations increased, the DS of CMSr powders increased, which affected the morphology of CMSr powders; a polyhedral shape of the native rice starch was deformed. In addition, the increase in NaOH concentrations of the synthesis of CMSr resulted in an increase in water solubility, elongation at break, and water vapor permeability (WVP) of CMSr films. ...
International Journal of Biological Macromolecules, 2021
Thermoplastic starch (TPS) was prepared from cassava starch blended with glycerol (70:30 w/w). Ge... more Thermoplastic starch (TPS) was prepared from cassava starch blended with glycerol (70:30 w/w). Gelatin (Gel) was incorporated into the TPS in water. The TPS/Gel was melt-blended with polyethylene-grafted-maleic anhydride (PEMAH). Maximum tensile strength of the TPS/PEMAH/Gel10 (29.3 MPa) increased significantly compared to the TPS/PEMAH blend (6.3 MPa), while elongation at break was 70%. The morphology of the TPS/PEMAH showed co-continuous morphology, while phase inversion occurred with the addition of Gel. The Gel was dispersed in the TPS matrix and covered the PEMAH. The TPS/PEMAH/Gel was nanoparticles (200 nm) in the TPS matrix. It showed two melting temperatures for PEMAH due to two structures with different crystal sizes. Melt viscosity of the TPS/PEMAH was enhanced with increasing Gel as the reaction induced chain extension. FTIR and rheology measurements confirmed the reaction between -NH groups of Gel and MAH groups of PEMAH. This reaction improved interfacial adhesion, morphology, and the mechanical properties of the blends.
Polymers, 2020
Cellulose from Asparagus officinalis stalk end was extracted and synthesized to carboxymethyl cel... more Cellulose from Asparagus officinalis stalk end was extracted and synthesized to carboxymethyl cellulose (CMCas) using monochloroacetic acid (MCA) via carboxymethylation reaction with various sodium hydroxide (NaOH) concentrations starting from 20% to 60%. The cellulose and CMCas were characterized by the physical properties, Fourier Transform Infrared spectroscopy (FTIR), Differential scanning calorimetry (DSC), Scanning electron microscopy (SEM) and X-ray diffraction (XRD). In addition, mechanical properties of CMCas films were also investigated. The optimum condition for producing CMCas was found to be 30% of NaOH concentration for the carboxymethylation reaction, which provided the highest percent yield of CMCas at 44.04% with the highest degree of substitution (DS) at 0.98. The melting point of CMCas decreased with increasing NaOH concentrations. Crystallinity of CMCas was significantly deformed (p < 0.05) after synthesis at a high concentration. The L* value of the CMCas was...
Horticulturae
Basils of the genus Ocimum are aromatic plants grown widely throughout the tropical and temperate... more Basils of the genus Ocimum are aromatic plants grown widely throughout the tropical and temperate regions. The essential oils obtained from their aerial parts are enriched with volatile organic compounds with high market demand for food and pharmaceutical industries. The volatile organic compounds have been shown to exhibit biological activities. Therefore, their novel applications have been extensively explored in the last few decades. The most widely available basils in the tropical areas include white holy basil (O. sanctum var. Shyama), red holy basil (O. sanctum var. Rama), Thai basil (O. basilicum var. thyrsiflorum), lemon basil (O. citriodorum), and tree basil (O. gratissimum). Over 60 volatiles of different classes have been exclusively described, and some of them could be useful as biomarkers for genotype specification. The major volatile ingredient is the phenylpropanoids, such as methyl eugenol, which has the potential as a natural product for mitigating Oriental fruit fl...
Plants
Androgenetic alopecia (AGA), a hair loss disorder, is a genetic predisposition to sensitive andro... more Androgenetic alopecia (AGA), a hair loss disorder, is a genetic predisposition to sensitive androgens, inflammation, and oxidative stress. Unfortunately, current treatments with synthetic medicines contain a restricted mechanism along with side effects, whereas the bioactive constituents of plant extracts are multifunctional, with fewer side effects. The massive amounts of rice husk and bran are agricultural wastes that may cause pollution and environmental problems. Owing to these rationales, the local rice variety, Bue Bang 3 CMU (BB3CMU), which is grown in northern Thailand, was evaluated for the valuable utilization of rice by-products, husk (BB3CMU-H) and bran (BB3CMU-RB) extracts, for AGA treatment regarding antioxidant, anti-inflammatory, anti-androgenic activities, and the characterization of bioactive compounds. Our study verified that BB3CMU-H had the highest level of polyphenols, contributing to its greater antioxidant activity. Conversely, BB3CMU-RB was the predominant s...
Journal of Fungi
Dictyophora indusiata or Phallus indusiatus is widely used as not only traditional medicine, func... more Dictyophora indusiata or Phallus indusiatus is widely used as not only traditional medicine, functional foods, but also, skin care agents. Biological activities of the fruiting body from D. indusiata were widely reported, while the studies on the application of immature bamboo mushroom extracts were limited especially in the wound healing effect. Wound healing process composed of 4 stages including hemostasis, inflammation, proliferation, and remodelling. This study divided the egg stage of bamboo mushroom into 3 parts: peel and green mixture (PGW), core (CW), and whole mushroom (WW). Then, aqueous extracts were investigated for their nucleotide sequencing, biological compound contents, and wound healing effect. The anti-inflammatory determination via the levels of cytokine releasing from macrophages, and the collagen stimulation activity on fibroblasts by matrix metalloproteinase-2 (MMP-2) inhibitory activity were determined to serve for the wound healing process promotion in the s...
ABSTRACT Poly(butylene succinate) (PBS) was melt blended with maleic anhydride-grafted ethylene-p... more ABSTRACT Poly(butylene succinate) (PBS) was melt blended with maleic anhydride-grafted ethylene-propylene-diene terpolymer (EPDM-MAH) and maleic anhydride-grafted ethylene-1-butene copolymer (EB-MAH) to obtain thermoplastic elastomers (TPEs) containing a biodegradable polyester. PBS/EB-MAH blend showed lower modulus and excellent strain recovery compared to PBS/EPDM-MAH blend due to the smaller rubber particle size. Tensile strength of PBS/EPDM-MAH blend was found to be significantly improved by annealing because of the increased interfacial reaction between PBS matrix phase and EPDM dispersed phase and the increased cross-linking in EPDM. As the result, it was found that the annealing process is effective for the improvement of the mechanical properties of PBS/MAH-grafted rubber blends.
The new (R) - phenylacetylcarbinol (PAC) batch biotransformation kinetics for partially purified ... more The new (R) - phenylacetylcarbinol (PAC) batch biotransformation kinetics for partially purified Candida tropicalis TISTR 5350 pyruvate decarboxylase (PDC) were characterized and validated with a comprehensive mathematical model in 250 mL scale with 250 mM phosphate buffer / pH 7.0. PDC could convert initial 100 / 120 mM benzaldehyde / pyruvate substrates to the statistical significantly highest (p £ 0.05) maximum PAC concentration (95.8 ± 0.1 mM) and production rate (0.639 ± 0.001 mM min-1). A parameter search strategy aimed at minimizing overall residual sum of square (RSST) based on a system of six ordinary differential equations was applied to PAC biotransformation profiles with initial benzaldehyde / pyruvate concentration of 100/120 and 30/36 mM. Ten important biotransformation kinetic parameters were then elucidated including the zeroth order activation rate constant due to phosphate buffer species (ka) of (9.38 ± < 0.01) × 10-6 % relative PDC activity min-1 mM-1. The vali...
Horticulturae
This research examined the changes of black garlic (BG) quality attributes when raw materials of ... more This research examined the changes of black garlic (BG) quality attributes when raw materials of different initial moisture contents (iMC) were used. Fresh garlic bulbs (cv. Thai) were shade-dried for eight weeks at a controlled condition at 29 °C and relative humidity (RH) of 55% to the desired iMC (ranging from ca. 50–70%). BG processing was at 75 °C, RH = 80% for ten days. After processing, physiological characteristics and chemical properties of garlic were determined. Results illustrated that fresh garlic with higher moisture content (ca. 70%) resulted in BG of a dark brown colour, sloppy texture, and lesser acidity (pH = 4.44), while samples with lower iMCs (<50%) gave products that were completely black, elastic in texture, and with higher acidity (pH = 3.79). The analysed bioactive compounds, as well as their antioxidative potentials, suggested that the longer the curing time, the higher the functional properties of the finished products, possessing a total phenolic, tota...
Quality Assurance and Safety of Crops & Foods, 2021
This study provides an application of new, natural source of crude peptide extract from Lablab be... more This study provides an application of new, natural source of crude peptide extract from Lablab bean (CPL). Use of additive such as benzoate in the rice noodle industry is a common practice and has several beneficial effects on quality and shelf-life. However, the shelf-life of semi-dried rice noodles can be extended by crude peptide extract with acceptable quality when compared to other additives. This research aimed to extract CPL and determine its effect on the growth of microorganisms. The use of the CPL to extend the shelf-life of semi-dried rice noodles was compared with other natural extracts (chitosan and thymol) and benzoic acid. The CPL samples were extracted using 5% pepsin and incubated for up to 24 h. CPL at 200 mg/mL could be used as the growth inhibitor for Bacillus cereus but not for Staphylococcus aureus and Escherichia coli. It was found that noodles with CPL had the highest cooking loss (4.69) and lowest tensile strength (22.6 g.force). Overall-liking scores show...
Purple glutinous rice bran (Kum Doi Saket rice (KUM)) contains high content of edible polysacchar... more Purple glutinous rice bran (Kum Doi Saket rice (KUM)) contains high content of edible polysaccharides and anthocyanins and has an excellent antioxidant activity. This research aimed to optimize the extraction of crude polysaccharides from defatted purple glutinous rice bran using an ultrasonic-assisted extraction (UAE) and compared with a hot water extraction (HWE). Results showed that optimal extraction condition was as follows: a defatted rice bran to water ratio of 1:20 w/v, extraction temperature and time of 70 °C for 20 min. Under the optimal extraction condition, the yield of polysaccharide of UAE (4%) was significantly higher than that obtained from the HWE (0.8%). Additionally, antioxidant activities of extracted polysaccharide including IC50 value DPPH, IC50 value ABTS, and FRAP value were 1.09 mg/mL, 2.80 mg/mL and 197 µM Fe2+/g, respectively. It is suggested that the UAE process is promising method to decrease the processing time and to enhance extracted polysaccharide yi...
Uploads
Papers by Kittisak Jantanasakulwong