Papers by Gedalias Martim
International Journal of Adhesion and Adhesives, 2018
The aim of this in vitro study was to synthesize three new methacrylate monomers based on the mod... more The aim of this in vitro study was to synthesize three new methacrylate monomers based on the modification of saccharides structures (glucose-Gluc, sucrose-Sucr and chitosan-Chit) with glycidyl methacrylate, and to use them in the composition of dental adhesives. Three methacrylate saccharide monomers were synthesized and characterized by mid-IR, 1 H and 13 C NMR, antioxidant activity and cytotoxic effect. Monomers included: one monosaccharide -Gluc-MA; one disaccharide -Sucr-MA; and one polysaccharide -Chit-MA. Primers containing HEMA, *
Journal of the mechanical behavior of biomedical materials, 2018
The aim of this study was to synthesize and characterize mesoporous materials SBA-15 and SBA-15 m... more The aim of this study was to synthesize and characterize mesoporous materials SBA-15 and SBA-15 modified with 3-(methacryloxy)-propyl-trimethoxysilane (MPS) to be used as inorganic filler in restorative dental composites and adhesives, and evaluate the main physical-chemical properties of the resulting material. The SBA-15 and SBA-15/MPS were characterized by FTIR, BET and X-Ray and combined with TEGDMA, bis-GMA and commercial spherical silica to produce dental composites. Afterwards, the mesoporous materials were combined with TEGDMA, bis-GMA and HEMA to make adhesives. To compare the results, composites and adhesives containing only commercial spherical silica were investigated. Some physical-chemical properties such as degree of conversion (DC), flexural strength (FS) and modulus (FM), water sorption and solubility (W and W), specific area (BET), and the leachable components were evaluated. The SBA-15/MPS can be used to prepare dental restorative materials, with some foreseeable ...
Brazilian Dental Science, 2016
Objetivo: Nesse estudo, foram avaliados os efeitos de dois diferentes protocolos de cura sobre as... more Objetivo: Nesse estudo, foram avaliados os efeitos de dois diferentes protocolos de cura sobre as propriedades de um compósito usando um polímero híbrido como resina dentária. Material e Métodos: Dois compósitos diferentes foram preparados, um contendo uma mistura de TEGDMA/Bis-GMA (50:50) e, outro contendo uma mistura de TEGDMA/p-MEMO (50:50), [p-MEMO: precursor oligomérico inorgânico]. Ambos compósitos foram reticulados com lucirin e canforoquinona. Os compósitos foram preparados com 70% em massa de carga inorgânica. Resistência flexural foi avaliada com uma máquina de testes universal e o grau de conversão calculado por espectroscopia na região do infravermelho. Um picnômetro a gás hélio foi usado para obter os dados de contração de polimerização. Testes de sorção foram feitos e microscopia eletrônica de varredura foi usada para avaliar efeitos deletérios sobre as superfícies das resinas. Resultados: A amostra constituída com TEGDMA/p-MEMO reticulada com lucirin (L-T/p) apresentou os melhores valores das propriedades monitoradas. Conclusão: Lucirin é o sistema fotoiniciador mais adequado para compostos dentários contendo polímeros híbridos.
Dental materials : official publication of the Academy of Dental Materials, 2015
Thio-urethanes were synthesized by combining 1,6-hexanediol-diissocyante (aliphatic) with pentaer... more Thio-urethanes were synthesized by combining 1,6-hexanediol-diissocyante (aliphatic) with pentaerythritol tetra-3-mercaptopropionate (PETMP) or 1,3-bis(1-isocyanato-1-methylethyl)benzene (aromatic) with trimethylol-tris-3-mercaptopropionate (TMP), at 1:2 isocyanate:thiol, leaving pendant thiols. Oligomers were added at 10-30phr to BisGMA-UDMA-TEGDMA (5:3:2, BUT). 25wt% silanated inorganic fillers were added. Commercial cement (Relyx Veneer, 3M-ESPE) was also evaluated with 10-20phr of aromatic oligomer. Near-IR was used to follow methacrylate conversion (DC) and rate of polymerization (Rpmax). Mechanical properties were evaluated in three-point bending (ISO 4049) for flexural strength/modulus (FS/FM, and toughness), and notched specimens (ASTM Standard E399-90) for fracture toughness (KIC). Polymerization stress (PS) was measured on the Bioman. Volumetric shrinkage (VS, %) was measured with the bonded disk technique. Results were analyzed with ANOVA/Tukey's test (α=5%). In gener...
Materials Science and Engineering: C
The aim of this study was to synthesize and characterize new multifunctional-urethane-methacrylat... more The aim of this study was to synthesize and characterize new multifunctional-urethane-methacrylate monomers to be used as the organic matrix in restorative dental composites, and evaluate the main physical-chemical properties of the resulting material. Bis-GMA (bisphenol-A-diglycidylmethacrylate) and GDMA (glycerol dimethacrylate) were modified by reacting the hydroxyl groups with isocyanate groups of urethane-methacrylate precursors to result in the new monomeric systems U-(bis-GMA)-Mod and U-(GDMA)-Mod, U=Urethane and Mod=Modified. The modifications were characterized by FTIR and (1)H NMR. The final monomeric synthesized system was used to prepare dental resins and composites. The physical-chemical properties were evaluated and compared with those of bis-GMA composites with varying filler contents or unfilled resins. U-(bis-GMA)-Mod and U-(GDMA)-Mod can be used to prepare dental restorative composites, with some foreseeable advantages compared with bis-GMA composites. One significant advantage is that these composites have the potential to be less toxic, once they presented a reduction of 50% in leaching of unreacted monomers extracted by solvent.
Dental materials: official publication of the Academy of Dental Materials
To synthesize and characterize different molar weight urethane multimethacrylates with a single s... more To synthesize and characterize different molar weight urethane multimethacrylates with a single stage (one-pot) procedure. To prepare and characterize the properties of related composites. Two methacrylate precursors were initially synthesized. Then, these precursors and the multimethacrylate system formed by their coupling were characterized by FTIR and (1)H NMR. The final product was used as a matrix (with TEGDMA and SiO2 silanized microparticles) in the preparation of composites and their physical and mechanical properties were compared to those of a bis-GMA-based resin. Water sorption and solubility measurements of the composites were also performed. FTIR and NMR suggested that the proposed synthesis route yields a mixture of mainly urethane-di, -tri, and tetramethacrylates. The composites presented low polymerization shrinkage (e.g. 1.88±0.08% for a resin with 70% of SiO2) and high flexural strength (e.g. 124.74±9.68MPa for a resin with 65% of SiO2) when compared to the bis-GMA...
Uploads
Papers by Gedalias Martim