To explore perceptions of undergraduate dental students regarding difficulties faced during endod... more To explore perceptions of undergraduate dental students regarding difficulties faced during endodontic procedures. Methods An e-questionnaire was sent to 57 fourth-year and 45 fifth-year dental students. It comprised questions regarding demographic data and difficulties faced during different steps of the endodontic treatment. The responses were recorded on a 5-point Likert scale. During dichotomization, responses where one and two were chosen were considered yes whereas responses where three, four, and five were chosen were considered no. The sample size (SS) calculated using the Qualtrics SS calculator was 89. Data were analyzed using SPSS version 20. Frequencies and percentages were calculated. A p-value of less than 0.05 was considered significant. The chi-square test was applied for comparison based on the students' academic year and genders. Results Ninety students responded with an 88.2% response rate. Most students reported not facing any difficulty in differentiating healthy pulp and periapex from conditions of pulp pathosis (78.9%) and periapical pathosis (75.6%). Most males found access opening and de-roofing of the pulp chamber (35.6%) and working length determination (31.1%) difficult. Females reported having difficulty mostly in mesial and distal shift radiograph techniques (55.6%) and access openings (51.1%). No statistical difference was found based on an academic year or gender except in the use of mesial and distal shift techniques for radiograph acquisition Conclusion Assessing difficulties encountered by students during endodontic therapy can aid in the development of teaching strategies for preclinical and clinical instruction. Mesial and distal shift techniques, access cavity preparation, and working length determination are areas requiring more focus in the training process.
Background: Polyether ether ketone (PEEK) has emerged as a new thermoplastic material with potent... more Background: Polyether ether ketone (PEEK) has emerged as a new thermoplastic material with potential applications as a restorative material. Aim: This study aimed to evaluate the marginal adaptation of PEEK copings compared to zirconia copings using field emission scanning electron microscopy. Materials and Methods: A freshly extracted maxillary central incisor was prepared for a full-coverage restoration following standard principles of tooth preparation. The tooth was sent to a laboratory for fabrication of samples using computer-aided design and manufacturing (CAD/CAM). Twenty samples of polyether ether ketone (PEEK) copings (group A) and 20 of zirconia copings were fabricated (group B). The copings were scanned under a field emission scanning electron microscope and measurements were taken at four distinct points. The marginal adaptation over the buccal, lingual, mesial, and distal margins for both groups was evaluated. One-way analysis of variance (ANOVA) and independent t test...
Aim: The aim of this study is to evaluate and compare the impact strength of conventional acrylic... more Aim: The aim of this study is to evaluate and compare the impact strength of conventional acrylic resin, high-impact acrylic resin, high-impact acrylic resin reinforced with silver nanoparticles, and high-impact acrylic resin reinforced with a zirconium oxide powder. Materials and methods: A total of 60 samples were prepared of dimensions 60 mm length × 7 mm width × 4 mm thickness to test impact strength. Machined stainless steel dies of the same dimension were used to form molds for the fabrication of these samples. Of 60 samples, 15 samples were prepared each from conventional acrylic resin (Group A1), high-impact acrylic resin (Group A2), acrylic resin reinforced with silver nanoparticles (Group A3), and acrylic resin reinforced with zirconium oxide powder (Group A4). Izod-Charpy pendulum impact testing machine was used. Results: The impact strength of group A1 was in the range of 2.83-3.30 kJ/m 2 (M = 3.12 kJ/m 2 , SD = 0.16), group A2 was in range of 5.10-5.78 kJ/m 2 (M = 5.51 kJ/m 2 , SD = 0.18), group A3 was in range 3.18-3.56 kJ/m 2 (M = 3.37 kJ/m 2 , SD = 0.11), and group A4 was in range 7.18-7.78 kJ/m 2 (M = 7.5 kJ/m 2 , SD = 0.18). Statistical analysis using one-way ANOVA and t-test revealed significant differences (p < 0.001). Conclusion: High-impact acrylic resin reinforced with zirconium oxide powder has the highest impact strength. Clinical significance: This research sheds light on the usefulness of novel filler materials in clinical prosthodontics.
None declared Conflict of interest: None declared Background: Suppression of tumorigenicity 2 (ST... more None declared Conflict of interest: None declared Background: Suppression of tumorigenicity 2 (ST2) is a member of the interleukin (IL)-1 family and has 2 isoforms: ST2L, a transmembrane form, and ST2, a soluble form. IL-33 can act as an immune system alarm signal when released by damaged cells, which in turn activates other cells expressing the ST2 receptor. This can cause inflammatory cytokines to be released and produced, as well as trigger osteoclastogenesis. This study aimed to investigate the levels of soluble ST2 in gingival samples. Material/Methods: The study population consisted of 30 individuals. The participants were divided into 3 groups: healthy participants, patients with periodontitis, and patients with periodontitis and diabetes mellitus. Periodontitis was determined using probing depth, clinical attachment loss, and gingival index. Patients with stage 2 to 4 periodontitis met the inclusion criteria. Gingival crevicular fluid (GCF) was collected for quantification of samples for ST2 levels by using an enzyme immunoassay. Results: The mean±standard deviation of ST2 GCF concentrations was relatively high (558.87±68.99) in the group with periodontitis and diabetes mellitus, compared with that of the periodontitis group (452.06±54.18) and healthy group (252.82±87.9). Conclusions: GCF ST2 values were found to be a marker of inflammatory activities. Thus, GCF ST2 could be a potential biomarker for the diagnosis of periodontitis as well as systemic diseases, such as diabetes mellitus. This pilot study was limited by a small number of participants. To confirm the associations, more large-scale investigations should be conducted.
This article is an open access article distributed under the terms and conditions of the Creative... more This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY
Resin-bonded fixed dental prostheses (RBFDP) are minimally invasive alternatives to traditional f... more Resin-bonded fixed dental prostheses (RBFDP) are minimally invasive alternatives to traditional full-coverage fixed partial dentures as they rely on resin cements for retention. This study compared and evaluated the tensile bond strength of three different resin-bonded bridge designs, namely, three-unit fixed-fixed, two-unit cantilever single abutment, and three-unit cantilever double-abutted resin-bonded bridge. Furthermore, the study attempted to compare the tensile bond strengths of the Maryland and Rochette types of resin-bonded bridges. Based on the inclusion and exclusion criteria, a total of seventy-five extracted maxillary incisors were collected and later were mounted on the acrylic blocks. Three distinct resin-bonded metal frameworks were designed: three-unit fixed-fixed (n = 30), two-unit cantilever single abutment (n = 30), and a three-unit cantilever double abutment (n = 30). The main groups were further divided into two subgroups based on the retainer design such as Ro...
Cracked teeth can pose a diagnostic dilemma for a clinician as they can mimic several other condi... more Cracked teeth can pose a diagnostic dilemma for a clinician as they can mimic several other conditions. The constant physiological stress along with any pathological strain like trauma or iatrogenic causes can lead to the development of microcracks in the teeth. Constant exposure to immense stress can cause the progression of these often-undiagnosed tooth cracks to cause tooth fractures. This review aims to outline the etiology of tooth cracks, their classification, and recent advances in the diagnosis of enamel cracks. Diagnosing a cracked tooth can be an arduous task as symptoms differ according to the location and extension of the incomplete fracture. Early detection is critical because restorative treatment can prevent fracture propagation, microleakage, pulpal or periodontal tissue involvement, and catastrophic cusp failure. Older methods of crack detection are not sensitive or specific. They include clinical examination, visual inspection, exploratory excavation, and percussio...
The essential factor in determining the preservation of restoration is the marginal seal. Restori... more The essential factor in determining the preservation of restoration is the marginal seal. Restoring cervical lesions with a resin composite has always been a challenge. Composite resins with various viscosities and different bonding systems are being researched to reduce the microleakage. Confocal laser scanning microscopy (CLSM) is the latest non-destructive technique for visualizing the microleakage. Objectives: To evaluate and compare the microleakage of Universal Flo composite resin (G-aenial) using etch and rinse adhesive system ER-2 steps (Adper Single Bond 2), self-etch adhesive system SE-1 step (G-Bond), and self-adhesive flowable composite resin (Constic) in Class V cavities using a confocal laser scanning microscope. Materials and Method: Class V cavities were prepared on 27 caries-free human extracted premolar teeth on the buccal and lingual surfaces with standardized dimensions of 2 mm height, width 4 mm, and a depth of 2 mm. After the cavity preparation, all teeth were ...
Dental caries is a common chronic disease, and anyone can be at threat of it throughout their lif... more Dental caries is a common chronic disease, and anyone can be at threat of it throughout their lifespan. In school-aged children, dental caries is the most frequent disease related with oral health. Contemporary dental caries management focuses on non-restorative, non-invasive, and micro-invasive therapeutic techniques that effectively eliminate the caries progression at the lesion level and decrease the loss of healthy tooth structure. One of these strategies is to use caries apprehending agents with antibacterial and remineralizing characteristics. Due to recent regulatory approval in the United States, the use of silver diamine fluoride (SDF) for the therapy of dental caries has received substantial interest. SDF has successfully prevented and reversed both primary tooth caries and permanent teeth root caries. Even though SDF is an effective anti-caries agent, but it is associated with certain drawbacks like gum irritation, metallic taste, and irreversible dark stains on applying ...
Dental pulp treatment is the least intrusive procedure currently available for preserving the vit... more Dental pulp treatment is the least intrusive procedure currently available for preserving the vitality of the pulp. Several studies are underway to improve the bioactivity of pulp capping materials. Tideglusib isa potent anti-inflammatory, antioxidant, and a regenerative drug developed against Alzheimer’s disease and has been shown to be effective in the treatment of dental cavities. However, its bioactive properties encapsulated within the nanoparticles as a component of pulp capping material are largely unknown. In this study, tideglusib-loaded bioactive glass nanoparticles were synthesized (tideglusib-BgNPs) and mixed at various concentrations into the calcium silicate cement to testits physiomechanical and bioactivitiescompared with biodentine (control). The calcium silicate cement with 10wgt% tideglusib-BgNPs showed comparable physiomechanical properties to that of biodentine. Additionally, the assessment of cytotoxicity and bioactivity (cell proliferation, wound healing, and c...
This study analyzes the evidence of the marginal discrepancy and internal adaptation of copings f... more This study analyzes the evidence of the marginal discrepancy and internal adaptation of copings fabricated using three types of resin patterns with subtractive (milling) and additive technology (3D printing), as it is not widely reported. Working casts (n = 15) were scanned and patterns were completed using computer-aided designing (CAD). Resin patterns were fabricated using the designed data and divided into three groups according to the method of fabrication of patterns: subtractive technology–CAD milled polymethyl methacrylate resin (Group-PMMA), additive technology [digital light processing (DLP) technique]–acrylonitrile–butadiene–styrene (ABS) patterns (Group-ABS), and polylactic acid (PLA) patterns (Group-PLA). Resin patterns were casted with Cobalt–Chromium (Co–Cr) alloy (lost wax technique). Internal and marginal gaps of the metal copings were analyzed with the replica technique under optical microscope. The Kruskal–Wallis test was used to compare values among the groups, an...
International Journal of Environmental Research and Public Health
Substance-abuse disorders are universally associated with comorbid illness. Tobacco is a widely a... more Substance-abuse disorders are universally associated with comorbid illness. Tobacco is a widely abused substance across the globe and presents a critical public health problem. The precise correlation between tobacco use and dental caries remains unclear. Thus, the present study aimed to evaluate the correlation between tobacco use and dental caries. Methodology: Based on selection criteria, a total of 270 (age 20–50 years) participants were included in the study, and were categorized as group A (n = 135), consisting of tobacco users, and group B (n = 135), comprising healthy controls (non-users). The Decayed, Missing, and Filled index (DMFT) was used to measure caries status. The Simplified Oral Hygiene index was used to evaluate oral health. Results: The tobacco group reported the use of cigarettes; smokeless tobacco in indigenous forms, such as gutka (areca nut, tobacco, and slaked lime), betel nut chewing; and a combination. Individuals with tobacco habits had a higher prevalenc...
Surface etching before cementation is a vital step that determines the clinical performance of ce... more Surface etching before cementation is a vital step that determines the clinical performance of ceramic restorations. Etching alters surface topography that contributes effective bonding between ceramic restoration and resin cement. This study aimed to compare etching techniques to determine the most effective etching method contributing the highest bond strength that helps in improving dental implants. Materials and methods: sixty discs of feldspathic ceramic measuring 10 mm diameter and 4 mm thickness were prepared. The 60 samples were divided into four equal groups based on the surface treatment technique used: group A: 9.6% hydrofluoric acid; group B: coarse diamond burs; group C: CO2 laser; and group D: no treatment. Ceramic disc specimens were examined under a Scanning Electron microscope (SEM) after surface treatment to characterize their surface morphology. Further, the specimens were luted with a resin luting agent and incubated for 24 h at a temperature of 37 °C simulating ...
Nanotechnology in modern material science is a research hot spot due to its ability to provide no... more Nanotechnology in modern material science is a research hot spot due to its ability to provide novel applications in the field of dentistry. Zinc Oxide Nanoparticles (ZnO NPs) are metal oxide nanoparticles that open new opportunities for biomedical applications that range from diagnosis to treatment. The domains of these nanoparticles are wide and diverse and include the effects brought about due to the anti-microbial, regenerative, and mechanical properties. The applications include enhancing the anti-bacterial properties of existing restorative materials, as an anti-sensitivity agent in toothpastes, as an anti-microbial and anti-fungal agent against pathogenic oral microflora, as a dental implant coating, to improve the anti-fungal effect of denture bases in rehabilitative dentistry, remineralizing cervical dentinal lesions, increasing the stability of local drug delivery agents and other applications.
Currently, thirty-seven million people are infected with human immunodeficiency virus-1 (HIV-1) w... more Currently, thirty-seven million people are infected with human immunodeficiency virus-1 (HIV-1) worldwide. Thankfully, the development of combined antiretroviral therapy (cART) regimens has decreased mortality and significantly improved the overall quality of life for these patients. However, approximately half of all patients clinically manifest with HIV-associated neurocognitive disorder (HAND), a spectrum of cognitive, motor, and behavioral abnormalities which histologically present as non-specific gliosis, synaptodendritc damage and loss of white matter and myelin. Furthermore, the severity of white matter damage correlates with the length of ART duration. However, almost no studies have been performed to determine how the myelin sheath or the oligodendrocytes that synthesize the sheath are damaged. Thus, we hypothesized that the administration of ART contributed in part to the myelin loss in the CNS of HIVpositive patients. Previously, we have reported that the protease inhibit...
To explore perceptions of undergraduate dental students regarding difficulties faced during endod... more To explore perceptions of undergraduate dental students regarding difficulties faced during endodontic procedures. Methods An e-questionnaire was sent to 57 fourth-year and 45 fifth-year dental students. It comprised questions regarding demographic data and difficulties faced during different steps of the endodontic treatment. The responses were recorded on a 5-point Likert scale. During dichotomization, responses where one and two were chosen were considered yes whereas responses where three, four, and five were chosen were considered no. The sample size (SS) calculated using the Qualtrics SS calculator was 89. Data were analyzed using SPSS version 20. Frequencies and percentages were calculated. A p-value of less than 0.05 was considered significant. The chi-square test was applied for comparison based on the students' academic year and genders. Results Ninety students responded with an 88.2% response rate. Most students reported not facing any difficulty in differentiating healthy pulp and periapex from conditions of pulp pathosis (78.9%) and periapical pathosis (75.6%). Most males found access opening and de-roofing of the pulp chamber (35.6%) and working length determination (31.1%) difficult. Females reported having difficulty mostly in mesial and distal shift radiograph techniques (55.6%) and access openings (51.1%). No statistical difference was found based on an academic year or gender except in the use of mesial and distal shift techniques for radiograph acquisition Conclusion Assessing difficulties encountered by students during endodontic therapy can aid in the development of teaching strategies for preclinical and clinical instruction. Mesial and distal shift techniques, access cavity preparation, and working length determination are areas requiring more focus in the training process.
Background: Polyether ether ketone (PEEK) has emerged as a new thermoplastic material with potent... more Background: Polyether ether ketone (PEEK) has emerged as a new thermoplastic material with potential applications as a restorative material. Aim: This study aimed to evaluate the marginal adaptation of PEEK copings compared to zirconia copings using field emission scanning electron microscopy. Materials and Methods: A freshly extracted maxillary central incisor was prepared for a full-coverage restoration following standard principles of tooth preparation. The tooth was sent to a laboratory for fabrication of samples using computer-aided design and manufacturing (CAD/CAM). Twenty samples of polyether ether ketone (PEEK) copings (group A) and 20 of zirconia copings were fabricated (group B). The copings were scanned under a field emission scanning electron microscope and measurements were taken at four distinct points. The marginal adaptation over the buccal, lingual, mesial, and distal margins for both groups was evaluated. One-way analysis of variance (ANOVA) and independent t test...
Aim: The aim of this study is to evaluate and compare the impact strength of conventional acrylic... more Aim: The aim of this study is to evaluate and compare the impact strength of conventional acrylic resin, high-impact acrylic resin, high-impact acrylic resin reinforced with silver nanoparticles, and high-impact acrylic resin reinforced with a zirconium oxide powder. Materials and methods: A total of 60 samples were prepared of dimensions 60 mm length × 7 mm width × 4 mm thickness to test impact strength. Machined stainless steel dies of the same dimension were used to form molds for the fabrication of these samples. Of 60 samples, 15 samples were prepared each from conventional acrylic resin (Group A1), high-impact acrylic resin (Group A2), acrylic resin reinforced with silver nanoparticles (Group A3), and acrylic resin reinforced with zirconium oxide powder (Group A4). Izod-Charpy pendulum impact testing machine was used. Results: The impact strength of group A1 was in the range of 2.83-3.30 kJ/m 2 (M = 3.12 kJ/m 2 , SD = 0.16), group A2 was in range of 5.10-5.78 kJ/m 2 (M = 5.51 kJ/m 2 , SD = 0.18), group A3 was in range 3.18-3.56 kJ/m 2 (M = 3.37 kJ/m 2 , SD = 0.11), and group A4 was in range 7.18-7.78 kJ/m 2 (M = 7.5 kJ/m 2 , SD = 0.18). Statistical analysis using one-way ANOVA and t-test revealed significant differences (p < 0.001). Conclusion: High-impact acrylic resin reinforced with zirconium oxide powder has the highest impact strength. Clinical significance: This research sheds light on the usefulness of novel filler materials in clinical prosthodontics.
None declared Conflict of interest: None declared Background: Suppression of tumorigenicity 2 (ST... more None declared Conflict of interest: None declared Background: Suppression of tumorigenicity 2 (ST2) is a member of the interleukin (IL)-1 family and has 2 isoforms: ST2L, a transmembrane form, and ST2, a soluble form. IL-33 can act as an immune system alarm signal when released by damaged cells, which in turn activates other cells expressing the ST2 receptor. This can cause inflammatory cytokines to be released and produced, as well as trigger osteoclastogenesis. This study aimed to investigate the levels of soluble ST2 in gingival samples. Material/Methods: The study population consisted of 30 individuals. The participants were divided into 3 groups: healthy participants, patients with periodontitis, and patients with periodontitis and diabetes mellitus. Periodontitis was determined using probing depth, clinical attachment loss, and gingival index. Patients with stage 2 to 4 periodontitis met the inclusion criteria. Gingival crevicular fluid (GCF) was collected for quantification of samples for ST2 levels by using an enzyme immunoassay. Results: The mean±standard deviation of ST2 GCF concentrations was relatively high (558.87±68.99) in the group with periodontitis and diabetes mellitus, compared with that of the periodontitis group (452.06±54.18) and healthy group (252.82±87.9). Conclusions: GCF ST2 values were found to be a marker of inflammatory activities. Thus, GCF ST2 could be a potential biomarker for the diagnosis of periodontitis as well as systemic diseases, such as diabetes mellitus. This pilot study was limited by a small number of participants. To confirm the associations, more large-scale investigations should be conducted.
This article is an open access article distributed under the terms and conditions of the Creative... more This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY
Resin-bonded fixed dental prostheses (RBFDP) are minimally invasive alternatives to traditional f... more Resin-bonded fixed dental prostheses (RBFDP) are minimally invasive alternatives to traditional full-coverage fixed partial dentures as they rely on resin cements for retention. This study compared and evaluated the tensile bond strength of three different resin-bonded bridge designs, namely, three-unit fixed-fixed, two-unit cantilever single abutment, and three-unit cantilever double-abutted resin-bonded bridge. Furthermore, the study attempted to compare the tensile bond strengths of the Maryland and Rochette types of resin-bonded bridges. Based on the inclusion and exclusion criteria, a total of seventy-five extracted maxillary incisors were collected and later were mounted on the acrylic blocks. Three distinct resin-bonded metal frameworks were designed: three-unit fixed-fixed (n = 30), two-unit cantilever single abutment (n = 30), and a three-unit cantilever double abutment (n = 30). The main groups were further divided into two subgroups based on the retainer design such as Ro...
Cracked teeth can pose a diagnostic dilemma for a clinician as they can mimic several other condi... more Cracked teeth can pose a diagnostic dilemma for a clinician as they can mimic several other conditions. The constant physiological stress along with any pathological strain like trauma or iatrogenic causes can lead to the development of microcracks in the teeth. Constant exposure to immense stress can cause the progression of these often-undiagnosed tooth cracks to cause tooth fractures. This review aims to outline the etiology of tooth cracks, their classification, and recent advances in the diagnosis of enamel cracks. Diagnosing a cracked tooth can be an arduous task as symptoms differ according to the location and extension of the incomplete fracture. Early detection is critical because restorative treatment can prevent fracture propagation, microleakage, pulpal or periodontal tissue involvement, and catastrophic cusp failure. Older methods of crack detection are not sensitive or specific. They include clinical examination, visual inspection, exploratory excavation, and percussio...
The essential factor in determining the preservation of restoration is the marginal seal. Restori... more The essential factor in determining the preservation of restoration is the marginal seal. Restoring cervical lesions with a resin composite has always been a challenge. Composite resins with various viscosities and different bonding systems are being researched to reduce the microleakage. Confocal laser scanning microscopy (CLSM) is the latest non-destructive technique for visualizing the microleakage. Objectives: To evaluate and compare the microleakage of Universal Flo composite resin (G-aenial) using etch and rinse adhesive system ER-2 steps (Adper Single Bond 2), self-etch adhesive system SE-1 step (G-Bond), and self-adhesive flowable composite resin (Constic) in Class V cavities using a confocal laser scanning microscope. Materials and Method: Class V cavities were prepared on 27 caries-free human extracted premolar teeth on the buccal and lingual surfaces with standardized dimensions of 2 mm height, width 4 mm, and a depth of 2 mm. After the cavity preparation, all teeth were ...
Dental caries is a common chronic disease, and anyone can be at threat of it throughout their lif... more Dental caries is a common chronic disease, and anyone can be at threat of it throughout their lifespan. In school-aged children, dental caries is the most frequent disease related with oral health. Contemporary dental caries management focuses on non-restorative, non-invasive, and micro-invasive therapeutic techniques that effectively eliminate the caries progression at the lesion level and decrease the loss of healthy tooth structure. One of these strategies is to use caries apprehending agents with antibacterial and remineralizing characteristics. Due to recent regulatory approval in the United States, the use of silver diamine fluoride (SDF) for the therapy of dental caries has received substantial interest. SDF has successfully prevented and reversed both primary tooth caries and permanent teeth root caries. Even though SDF is an effective anti-caries agent, but it is associated with certain drawbacks like gum irritation, metallic taste, and irreversible dark stains on applying ...
Dental pulp treatment is the least intrusive procedure currently available for preserving the vit... more Dental pulp treatment is the least intrusive procedure currently available for preserving the vitality of the pulp. Several studies are underway to improve the bioactivity of pulp capping materials. Tideglusib isa potent anti-inflammatory, antioxidant, and a regenerative drug developed against Alzheimer’s disease and has been shown to be effective in the treatment of dental cavities. However, its bioactive properties encapsulated within the nanoparticles as a component of pulp capping material are largely unknown. In this study, tideglusib-loaded bioactive glass nanoparticles were synthesized (tideglusib-BgNPs) and mixed at various concentrations into the calcium silicate cement to testits physiomechanical and bioactivitiescompared with biodentine (control). The calcium silicate cement with 10wgt% tideglusib-BgNPs showed comparable physiomechanical properties to that of biodentine. Additionally, the assessment of cytotoxicity and bioactivity (cell proliferation, wound healing, and c...
This study analyzes the evidence of the marginal discrepancy and internal adaptation of copings f... more This study analyzes the evidence of the marginal discrepancy and internal adaptation of copings fabricated using three types of resin patterns with subtractive (milling) and additive technology (3D printing), as it is not widely reported. Working casts (n = 15) were scanned and patterns were completed using computer-aided designing (CAD). Resin patterns were fabricated using the designed data and divided into three groups according to the method of fabrication of patterns: subtractive technology–CAD milled polymethyl methacrylate resin (Group-PMMA), additive technology [digital light processing (DLP) technique]–acrylonitrile–butadiene–styrene (ABS) patterns (Group-ABS), and polylactic acid (PLA) patterns (Group-PLA). Resin patterns were casted with Cobalt–Chromium (Co–Cr) alloy (lost wax technique). Internal and marginal gaps of the metal copings were analyzed with the replica technique under optical microscope. The Kruskal–Wallis test was used to compare values among the groups, an...
International Journal of Environmental Research and Public Health
Substance-abuse disorders are universally associated with comorbid illness. Tobacco is a widely a... more Substance-abuse disorders are universally associated with comorbid illness. Tobacco is a widely abused substance across the globe and presents a critical public health problem. The precise correlation between tobacco use and dental caries remains unclear. Thus, the present study aimed to evaluate the correlation between tobacco use and dental caries. Methodology: Based on selection criteria, a total of 270 (age 20–50 years) participants were included in the study, and were categorized as group A (n = 135), consisting of tobacco users, and group B (n = 135), comprising healthy controls (non-users). The Decayed, Missing, and Filled index (DMFT) was used to measure caries status. The Simplified Oral Hygiene index was used to evaluate oral health. Results: The tobacco group reported the use of cigarettes; smokeless tobacco in indigenous forms, such as gutka (areca nut, tobacco, and slaked lime), betel nut chewing; and a combination. Individuals with tobacco habits had a higher prevalenc...
Surface etching before cementation is a vital step that determines the clinical performance of ce... more Surface etching before cementation is a vital step that determines the clinical performance of ceramic restorations. Etching alters surface topography that contributes effective bonding between ceramic restoration and resin cement. This study aimed to compare etching techniques to determine the most effective etching method contributing the highest bond strength that helps in improving dental implants. Materials and methods: sixty discs of feldspathic ceramic measuring 10 mm diameter and 4 mm thickness were prepared. The 60 samples were divided into four equal groups based on the surface treatment technique used: group A: 9.6% hydrofluoric acid; group B: coarse diamond burs; group C: CO2 laser; and group D: no treatment. Ceramic disc specimens were examined under a Scanning Electron microscope (SEM) after surface treatment to characterize their surface morphology. Further, the specimens were luted with a resin luting agent and incubated for 24 h at a temperature of 37 °C simulating ...
Nanotechnology in modern material science is a research hot spot due to its ability to provide no... more Nanotechnology in modern material science is a research hot spot due to its ability to provide novel applications in the field of dentistry. Zinc Oxide Nanoparticles (ZnO NPs) are metal oxide nanoparticles that open new opportunities for biomedical applications that range from diagnosis to treatment. The domains of these nanoparticles are wide and diverse and include the effects brought about due to the anti-microbial, regenerative, and mechanical properties. The applications include enhancing the anti-bacterial properties of existing restorative materials, as an anti-sensitivity agent in toothpastes, as an anti-microbial and anti-fungal agent against pathogenic oral microflora, as a dental implant coating, to improve the anti-fungal effect of denture bases in rehabilitative dentistry, remineralizing cervical dentinal lesions, increasing the stability of local drug delivery agents and other applications.
Currently, thirty-seven million people are infected with human immunodeficiency virus-1 (HIV-1) w... more Currently, thirty-seven million people are infected with human immunodeficiency virus-1 (HIV-1) worldwide. Thankfully, the development of combined antiretroviral therapy (cART) regimens has decreased mortality and significantly improved the overall quality of life for these patients. However, approximately half of all patients clinically manifest with HIV-associated neurocognitive disorder (HAND), a spectrum of cognitive, motor, and behavioral abnormalities which histologically present as non-specific gliosis, synaptodendritc damage and loss of white matter and myelin. Furthermore, the severity of white matter damage correlates with the length of ART duration. However, almost no studies have been performed to determine how the myelin sheath or the oligodendrocytes that synthesize the sheath are damaged. Thus, we hypothesized that the administration of ART contributed in part to the myelin loss in the CNS of HIVpositive patients. Previously, we have reported that the protease inhibit...
Uploads
Papers by Bassam Zidane