Back to table of contents :arrow_up_small:

\n\n### Prerequisites\n\n#### Cleaning\n\nPlease remove any web server and mail services running on your server. I recommend using a clean installation of your preferred distribution. If you are using Debian, remember to remove the default MTA **Exim4**:\n\n```\n# apt-get purge exim4*\n```\n\nAlso make sure that no other application is interfering with mail server configuration:\n\n```\n# netstat -tulpn | grep -E -w '25|80|110|143|443|465|587|993|995|4190'\n```\n\nIf this command returns any results please remove or stop the application running on that port.\n\n#### Ports\n\nIf you have a firewall, unblock the following ports, according to your needs:\n\n| Service | Software | Protocol | Port |\n| ------- | -------- | -------- | ---- |\n| SMTP | Postfix | TCP | 25 |\n| HTTP | Nginx | TCP | 80 |\n| POP3 | Dovecot | TCP | 110 |\n| IMAP | Dovecot | TCP | 143 |\n| HTTPS | Nginx | TCP | 443 |\n| SMTPS | Postfix | TCP | 465 |\n| Submission | Postfix | TCP | 587 |\n| IMAPS | Dovecot | TCP | 993 |\n| POP3S | Dovecot | TCP | 995 |\n| ManageSieve | Dovecot | TCP | 4190 |\n\n#### DNS setup\n\nI recommend you to use [hardware/nsd-dnssec](https://github.com/hardware/nsd-dnssec) as an authoritative name server with DNSSEC capabilities. NSD is an authoritative only, high performance, simple and open source name server.\n\n#### DNS records and reverse PTR\n\nA correct DNS setup is required, this step is very important.\n\n| HOSTNAME | CLASS | TYPE | PRIORITY | VALUE |\n| -------- | ----- | ---- | -------- | ----- |\n| mail | IN | A/AAAA | any | 1.2.3.4 |\n| spam | IN | CNAME | any | mail.domain.tld. |\n| webmail | IN | CNAME | any | mail.domain.tld. |\n| postfixadmin | IN | CNAME | any | mail.domain.tld. |\n| @ | IN | MX | 10 | mail.domain.tld. |\n| @ | IN | TXT | any | \"v=spf1 a mx ip4:SERVER_IPV4 ~all\" |\n| {{selector}}._domainkey | IN | TXT | any | \"v=DKIM1; k=rsa; p=YOUR DKIM Public Key\" |\n| _dmarc | IN | TXT | any | \"v=DMARC1; p=reject; rua=mailto:postmaster@domain.tld; ruf=mailto:admin@domain.tld; fo=0; adkim=s; aspf=s; pct=100; rf=afrf; sp=reject\" |\n\n**Notes:**\n\n* Make sure that the **PTR record** of your IP matches the FQDN (default: mail.domain.tld) of your mailserver host. This record is usually set in your web hosting interface.\n* {{selector}} defaults to ``mail`` unless changed via ``DKIM_SELECTOR``\n* DKIM, SPF and DMARC records are recommended to build a good reputation score.\n* The DKIM public key will be available on host after the container startup:\n\n```\n/mnt/docker/mail/dkim/domain.tld/{{selector}}.public.key\n```\n\nTo regenerate your public and private keys, remove the `/mnt/docker/mail/dkim/domain.tld` folder. By default a **1024-bit** key is generated, you can increase this size by setting the `DKIM_KEY_LENGTH` environment variable with a higher value. Check your domain registrar support to verify that it supports a TXT record long enough for a key larger than 1024 bits.\n\nThese DNS record will raise your trust reputation score and reduce abuse of your domain name. You can find more information here:\n\n* http://www.openspf.org/\n* http://www.opendkim.org/\n* https://dmarc.org/\n* http://arc-spec.org/\n\n#### Testing\n\nYou can audit your mailserver with the following assessment services:\n\n* https://www.mail-tester.com/\n* https://www.hardenize.com/\n* https://observatory.mozilla.org/\n* https://www.emailprivacytester.com/ (MUA side)\n\n

Back to table of contents :arrow_up_small:

\n\n### Installation\n\n#### 1 - Prepare your environment\n\n:bulb: The reverse proxy used in this setup is [Traefik](https://traefik.io/), but you can use the solution of your choice (Nginx, Apache, Haproxy, Caddy, H2O, etc pp).\n\n:warning: This docker image may not work with some hardened Linux distribution using security-enhancing kernel patches like GrSecurity, please use a [supported platform](https://docs.docker.com/install/#supported-platforms).\n\n```bash\n# Create a new docker network for Traefik (IPv4 only)\ndocker network create http_network\n# If you want to support IPv6, please refer to [IPv6 support]\n\n# Create the required folders and files\nmkdir -p /mnt/docker/traefik/acme && cd /mnt/docker \\\n&& curl https://raw.githubusercontent.com/mailserver2/mailserver/master/docker-compose.sample.yml -o docker-compose.yml \\\n&& curl https://raw.githubusercontent.com/mailserver2/mailserver/master/sample.env -o .env \\\n&& curl https://raw.githubusercontent.com/mailserver2/mailserver/master/traefik.sample.toml -o traefik/traefik.toml \\\n&& touch traefik/acme/acme.json \\\n&& chmod 600 docker-compose.yml .env traefik/traefik.toml traefik/acme/acme.json\n```\n\nEdit the `.env` and `traefik.toml`, adapt to your needs, then start all services:\n\n```\ndocker-compose up -d\n```\n\n#### 2 - Postfixadmin installation\n\nPostfixAdmin is a web based interface used to manage mailboxes, virtual domains and aliases.\n\n* Docker image: https://github.com/hardware/postfixadmin\n* How to setup: [Postfixadmin initial configuration](https://github.com/mailserver2/mailserver/wiki/Postfixadmin-initial-configuration)\n\n#### 3 - Rainloop installation (optional)\n\nRainloop is a simple, modern and fast web mail front end with Sieve scripts support (filters and vacation message), GPG and a modern user interface.\n\n* Docker image: https://github.com/hardware/rainloop\n* How to setup: [Rainloop initial configuration](https://github.com/mailserver2/mailserver/wiki/Rainloop-initial-configuration)\n\n#### 4 - Done, congratulation ! :tada:\n\nAt first launch, the container takes few minutes to generate SSL certificates (if needed), DKIM keypair generation and update Clamav database, all of this takes some time (1/2 minutes). This image comes with a snake-oil self-signed certificate, please use your own trusted certificates. [See below](https://github.com/mailserver2/mailserver#ssl-certificates) for configuration.\n\n**List of webservices available:**\n\n| Service | URI |\n| ------- | --- |\n| **Traefik dashboard** | https://mail.domain.tld/ |\n| **Rspamd dashboard** | https://spam.domain.tld/ |\n| **Administration** | https://postfixadmin.domain.tld/ |\n| **Webmail** | https://webmail.domain.tld/ |\n\nTraefik dashboard use a basic authentication (user:admin, password:12345), the password can be encoded in MD5, SHA1 and BCrypt. You can use [htpasswd ](https://httpd.apache.org/docs/2.4/programs/htpasswd.html) to generate those ones. Users can be specified directly in the `traefik.toml` file. Rspamd dashboard use the password defined in your `docker-compose.yml`.\n\nYou can check the startup logs with this command:\n\n```\n# docker logs -f mailserver\n\n[INFO] Let's encrypt live directory found\n[INFO] Using /etc/letsencrypt/live/mail.domain.tld folder\n[INFO] Creating DKIM keys for domain domain.tld\n[INFO] Database hostname found in /etc/hosts\n[INFO] Fetchmail forwarding is enabled.\n[INFO] Automatic GPG encryption is enabled.\n[INFO] ManageSieve protocol is enabled.\n[INFO] POP3 protocol is enabled.\n-------------------------------------------------------------------------------------\n2017-08-26T11:06:58.885562+00:00 mail root: s6-supervise : spawning clamd process\n2017-08-26T11:06:59.059077+00:00 mail root: s6-supervise : spawning freshclam process\n2017-08-26T11:06:59.395214+00:00 mail root: s6-supervise : spawning rspamd process\n2017-08-26T11:07:01.615597+00:00 mail root: s6-supervise : spawning unbound process\n2017-08-26T11:07:01.870856+00:00 mail root: s6-supervise : spawning postfix process\n2017-08-26T11:07:03.303536+00:00 mail root: s6-supervise : spawning dovecot process\n...\n```\n\n

Back to table of contents :arrow_up_small:

\n\n### Rancher Catalog\n\n![rancher-logo](https://i.imgur.com/R9AArJN.png)\n\nhttps://github.com/hardware/mailserver-rancher\n\nThis catalog provides a basic template to easily deploy an email server based on [hardware/mailserver](https://github.com/hardware/mailserver) very quickly. To use it, just add this repository to your Rancher system as a catalog in `Admin > Settings` page and follow [the readme](https://github.com/hardware/mailserver-rancher/blob/master/README.md). This catalog has been initiated by [@MichelDiz](https://github.com/MichelDiz).\n\n![rancher-ui](https://i.imgur.com/kdJxAiN.png)\n\n

Back to table of contents :arrow_up_small:

\n\n### Ansible Playbooks\n\n![logo](https://i.imgur.com/tvTG8pN.png)\n\nIf you use Ansible, I recommend you to go to see [@ksylvan](https://github.com/ksylvan) playbooks here: https://github.com/ksylvan/docker-mail-server\n\n

Back to table of contents :arrow_up_small:

\n\n### Environment variables\n\n| Variable | Description | Type | Default value |\n| -------- | ----------- | ---- | ------------- |\n| **VMAILUID** | vmail user id | *optional* | 1024\n| **VMAILGID** | vmail group id | *optional* | 1024\n| **VMAIL_SUBDIR** | Individual mailbox' subdirectory | *optional* | mail\n| **DKIM_KEY_LENGTH** | Size of your DKIM RSA key pair | *optional* | 1024\n| **DKIM_SELECTOR** | Your DKIM selector | *optional* | `mail`\n| **DEBUG_MODE** | Enable Postfix, Dovecot, Rspamd and Unbound verbose logging | *optional* | false\n| **PASSWORD_SCHEME** | Passwords encryption scheme | *optional* | `SHA512-CRYPT`\n| **DBDRIVER** | Database type: mysql, pgsql, ldap | *optional* | mysql\n| **DBHOST** | Database instance ip/hostname | *optional* | mariadb\n| **DBPORT** | Database instance port | *optional* | 3306 / 389 (sql/ldap)\n| **DBUSER** | Database username | *optional* | postfix\n| **DBNAME** | Database name | *optional* | postfix\n| **DBPASS** | Database password or location of a file containing it | **required** *\\*1)* | null\n| **REDIS_HOST** | Redis instance ip/hostname | *optional* | redis\n| **REDIS_PORT** | Redis instance port | *optional* | 6379\n| **REDIS_PASS** | Redis database password or location of a file containing it | *optional* | null\n| **REDIS_NUMB** | Redis database number | *optional* | 0\n| **RSPAMD_PASSWORD** | Rspamd WebUI and controller password or location of a file containing it | **required** | null\n| **ADD_DOMAINS** | Add additional domains to the mailserver separated by commas (needed for dkim keys etc.) | *optional* | null\n| **RELAY_NETWORKS** | Additional IPs or networks the mailserver relays without authentication | *optional* | null\n| **WHITELIST_SPAM_ADDRESSES** | List of whitelisted email addresses separated by commas | *optional* | null\n| **DISABLE_RSPAMD_MODULE** | List of disabled modules separated by commas | *optional* | null\n| **DISABLE_CLAMAV** | Disable virus scanning | *optional* | false\n| **DISABLE_SIEVE** | Disable ManageSieve protocol | *optional* | false\n| **DISABLE_SIGNING** | Disable DKIM/ARC signing | *optional* | false\n| **DISABLE_GREYLISTING** | Disable greylisting policy | *optional* | false\n| **DISABLE_RATELIMITING** | Disable rate limiting policy | *optional* | true\n| **DISABLE_DNS_RESOLVER** | Disable the local DNS resolver | *optional* | false\n| **DISABLE_SSL_WATCH** | Disable watching of `acme.json` and the Let's Encrypt directory | *optional* | false\n| **ENABLE_POP3** | Enable POP3 protocol | *optional* | false\n| **ENABLE_FETCHMAIL** | Enable fetchmail forwarding | *optional* | false\n| **ENABLE_ENCRYPTION** | Enable automatic GPG encryption | *optional* | false\n| **FETCHMAIL_INTERVAL** | Fetchmail polling interval | *optional* | 10\n| **RECIPIENT_DELIMITER** | RFC 5233 subaddress extension separator (single character only) | *optional* | +\n\n\\*1) **DBPASS** is NOT required when using LDAP authentication\n\n* Use **DEBUG_MODE** to enable the debug mode. Switch to `true` to enable verbose logging for `postfix`, `dovecot`, `rspamd` and `Unbound`. To debug components separately, use this syntax: `DEBUG_MODE=postfix,rspamd`.\n* **VMAIL_SUBDIR** is the mail location subdirectory name `/var/mail/vhosts/%domain/%user/$subdir`. For more information, read this: https://wiki.dovecot.org/VirtualUsers/Home\n* **PASSWORD_SCHEME** for compatible schemes, read this: https://wiki.dovecot.org/Authentication/PasswordSchemes\n* Currently, only a single **RECIPIENT_DELIMITER** is supported. Support for multiple delimiters will arrive with Dovecot v2.3.\n* **FETCHMAIL_INTERVAL** must be a number between **1** and **59** minutes.\n* Use **DISABLE_DNS_RESOLVER** if you have some DNS troubles and DNSSEC lookup issues with the local DNS resolver.\n* Use **DISABLE_RSPAMD_MODULE** to disable any module listed here: https://rspamd.com/doc/modules/\n* **OPENDKIM_KEY_LENGTH** has been renamed to **DKIM_KEY_LENGTH**, but falls back to **OPENDKIM_KEY_LENGTH** for backwards compatability\n\nWhen using LDAP authentication the following additional variables become available. All *DBUSER*, *DBNAME* and *DBPASS* variables will not be used in this case:\n\n| Variable | Description | Type | Default value |\n| -------- | ----------- | ---- | ------------- |\n| **LDAP_TLS_ENABLED** | Enable TLS on LDAP | *optional* | false\n| **LDAP_TLS_CA_FILE** | The TLS CA File | **required** if **LDAP_TLS_ENABLED** |\n| **LDAP_TLS_FORCE** | Force TLS connections | **required** if **LDAP_TLS_ENABLED** | false\n| **LDAP_BIND** | Bind to LDAP Server | *optional* | true\n| **LDAP_BIND_DN** | The DN to bind to | **required** if **LDAP_BIND** |\n| **LDAP_BIND_PW** | LDAP password or location of a file containing it | **required** if **LDAP_BIND** |\n| **LDAP_DEFAULT_SEARCH_BASE** | The base DN for all lookups | **required** |\n| **LDAP_DEFAULT_SEARCH_SCOPE** | The default scope for all lookups (sub, base or one) | *optional* | sub\n| **LDAP_DOMAIN_SEARCH_BASE** | The search base for domain lookups | *optional* | ${LDAP_DEFAULT_SEARCH_BASE}\n| **LDAP_DOMAIN_SEARCH_SCOPE** | The search scope for domain lookups | *optional* | ${LDAP_DEFAULT_SEARCH_SCOPE}\n| **LDAP_DOMAIN_FILTER** | The search filter for domain lookups | **required** |\n| **LDAP_DOMAIN_ATTRIBUTE** | The attributes for domain lookup | **required** |\n| **LDAP_DOMAIN_FORMAT** | The format for domain lookups | *optional* |\n| **LDAP_MAILBOX_SEARCH_BASE** | The search base for mailbox lookups | *optional* | ${LDAP_DEFAULT_SEARCH_BASE}\n| **LDAP_MAILBOX_SEARCH_SCOPE** | The search scope for mailbox lookups | *optional* | ${LDAP_DEFAULT_SEARCH_SCOPE}\n| **LDAP_MAILBOX_FILTER** | The search filter for mailbox lookups | **required** |\n| **LDAP_MAILBOX_ATTRIBUTE** | The attributes for mailbox lookup | **required** |\n| **LDAP_MAILBOX_FORMAT** | The format for domain mailbox | *optional* |\n| **LDAP_ALIAS_SEARCH_BASE** | The search base for domain lookups | *optional* | ${LDAP_DEFAULT_SEARCH_BASE}\n| **LDAP_ALIAS_SEARCH_SCOPE** | The search scope for domain lookups | *optional* | ${LDAP_DEFAULT_SEARCH_SCOPE}\n| **LDAP_ALIAS_FILTER** | The search filter for domain lookups | **required** |\n| **LDAP_ALIAS_ATTRIBUTE** | The attributes for domain lookup | **required** |\n| **LDAP_ALIAS_FORMAT** | The format for domain lookups | *optional* |\n| **LDAP_FORWARD_SEARCH_BASE** | The search base for forward lookups | *optional* | ${LDAP_DEFAULT_SEARCH_BASE}\n| **LDAP_FORWARD_SEARCH_SCOPE** | The search scope for forward lookups | *optional* | ${LDAP_DEFAULT_SEARCH_SCOPE}\n| **LDAP_FORWARD_FILTER** | The search filter for forward lookups | *optional* |\n| **LDAP_FORWARD_ATTRIBUTE** | The attributes for forward lookup | *optional* |\n| **LDAP_FORWARD_FORMAT** | The format for forward lookups | *optional* |\n| **LDAP_GROUP_SEARCH_BASE** | The search base for group lookups | *optional* | ${LDAP_DEFAULT_SEARCH_BASE}\n| **LDAP_GROUP_SEARCH_SCOPE** | The search scope for group lookups | *optional* | ${LDAP_DEFAULT_SEARCH_SCOPE}\n| **LDAP_GROUP_FILTER** | The search filter for group lookups | *optional* |\n| **LDAP_GROUP_ATTRIBUTE** | The attributes for group lookup | *optional* |\n| **LDAP_GROUP_FORMAT** | The format for group lookups | *optional* |\n| **LDAP_SENDER_SEARCH_BASE** | The search base for sender lookups | *optional* | ${LDAP_DEFAULT_SEARCH_BASE}\n| **LDAP_SENDER_SEARCH_SCOPE** | The search scope for sender lookups | *optional* | ${LDAP_DEFAULT_SEARCH_SCOPE}\n| **LDAP_SENDER_FILTER** | The search filter for sender lookups | **required** |\n| **LDAP_SENDER_ATTRIBUTE** | The attributes for sender lookup | **required** |\n| **LDAP_SENDER_FORMAT** | The format for sender lookups | **required** |\n| **LDAP_DOVECOT_USER_ATTRS** | Dovecot user attribute mapping | **required** |\n| **LDAP_DOVECOT_USER_FILTER** | Dovecot user search filter | **required** |\n| **LDAP_DOVECOT_PASS_ATTRS** | Dovecot user password attribute mapping | **required** |\n| **LDAP_DOVECOT_PASS_FILTER** | Dovecot user password filter | **required** |\n| **LDAP_DOVECOT_ITERATE_ATTRS** | Dovecot user iterate attributes | *optional* |\n| **LDAP_DOVECOT_ITERATE_FILTER** | Dovecot user iterate filters | *optional* |\n| **LDAP_MASTER_USER_ENABLED** | Enable LDAP master users | *optional* | false\n| **LDAP_MASTER_USER_SEPARATOR** | LDAP master user separator | **required** if **LDAP_MASTER_USER_ENABLED** | \\*\n| **LDAP_MASTER_USER_SEARCH_BASE** | LDAP master user search base | **required** if **LDAP_MASTER_USER_ENABLED** | ${LDAP_DEFAULT_SEARCH_BASE}\n| **LDAP_MASTER_USER_SEARCH_SCOPE** | LDAP master user scope | **required** if **LDAP_MASTER_USER_ENABLED** | ${LDAP_DEFAULT_SEARCH_SCOPE}\n| **LDAP_DOVECOT_MASTER_USER_ATTRS** | LDAP master user Dovecot attributes | **required** if **LDAP_MASTER_USER_ENABLED** |\n| **LDAP_DOVECOT_MASTER_USER_FILTER** | LDAP master user Dovecot search filter | **required** if **LDAP_MASTER_USER_ENABLED** |\n\n

Back to table of contents :arrow_up_small:

\n\n### Automatic GPG encryption of all your emails\n\n#### How does it work ?\n\n[Zeyple](https://infertux.com/labs/zeyple/) catches email from the postfix queue, then encrypts it if a corresponding recipient's GPG public key is found. Finally, it puts it back into the queue.\n\n![zeyple](https://i.imgur.com/gGQZL4V.png)\n\n#### Enable automatic GPG encryption\n\n:heavy_exclamation_mark: **Please enable this option carefully and only if you know what you are doing.**\n\nSwitch `ENABLE_ENCRYPTION` environment variable to `true`. The public keyring will be saved in `/var/mail/zeyple/keys`.\nPlease don't change the default value of `RECIPIENT_DELIMITER` (default = \"+\"). If encryption is enabled with another delimiter, Zeyple could have an unpredictable behavior.\n\n#### Import your public key\n\n:warning: Make sure to send your public key on a GPG keyserver before to run the following command.\n\n```\ndocker exec -ti mailserver encryption.sh import-key YOUR_KEY_ID\n```\n\n#### Import all recipients public keys\n\nThis command browses all `/var/mail/vhosts/*` domains directories and users subdirectories to find all the recipients addresses in the mailserver.\n\n```\ndocker exec -ti mailserver encryption.sh import-all-keys\n```\n\n#### Specify another GPG keyserver\n\n```\ndocker exec -ti mailserver encryption.sh import-key YOUR_KEY","has_starred","hub_user","immutable_tags_settings",{"_69":11,"_70":71},"enabled","rules",[72],".*","is_automated","permissions",{"_76":77,"_78":11,"_79":11},"read",true,"write","admin","user","storage_size",4138591054,"orgData",{"_85":86,"_87":88,"_89":90,"_91":26,"_92":93,"_94":93,"_95":93,"_96":93,"_97":98,"_99":93,"_100":93,"_101":93,"_102":77},"id","4ec12c2423694f12a638a9b79748dfde","uuid","4ec12c24-2369-4f12-a638-a9b79748dfde","type","organization","orgname","full_name","","location","company","profile_url","date_joined","2020-02-29T10:48:03.91002Z","gravatar_url","gravatar_email","badge","is_active","recentTags",[105,142,155,161,171,181,191,201,212,222],{"_106":37,"_107":108,"_109":110,"_111":112,"_85":113,"_114":115,"_43":130,"_131":108,"_132":133,"_134":49,"_50":135,"_136":137,"_138":121,"_139":130,"_140":59,"_141":77},"content_type","creator",2088819,"digest","sha256:b6a65785af7dfbfbe209cda3b01f810e77c45dce69ad1bc8b12f7a4ebccac919","full_size",169168090,1045606020,"images",[116],{"_117":118,"_109":110,"_119":93,"_120":121,"_122":123,"_124":125,"_126":93,"_127":-5,"_128":112,"_56":59,"_129":-5},"architecture","amd64","features","last_pulled","2026-03-29T16:54:00.866257066Z","last_pushed","2026-01-09T21:26:03.01673609Z","os","linux","os_features","os_version","size","variant","2026-01-09T21:26:03.356064Z","last_updater","last_updater_username","andrewsav","media_type","1.1.23.1","repository",8584025,"tag_last_pulled","tag_last_pushed","tag_status","v2",{"_106":37,"_107":143,"_109":144,"_111":145,"_85":146,"_114":147,"_43":151,"_131":152,"_132":153,"_134":49,"_50":154,"_136":137,"_138":149,"_139":151,"_140":59,"_141":77},9484545,"sha256:3c96fce8f4dbaba33dd77b2d89e48a624453887c718f18492508a2eddefb86ef",156567138,89167919,[148],{"_117":118,"_109":144,"_119":93,"_120":149,"_122":150,"_124":125,"_126":93,"_127":-5,"_128":145,"_56":59,"_129":-5},"2026-03-29T16:08:31.85488811Z","2025-08-29T05:02:00.434029984Z","2025-08-29T05:02:07.89046Z",9484163,"sarasmiseth","latest",{"_106":37,"_107":152,"_109":144,"_111":145,"_85":156,"_114":157,"_43":159,"_131":152,"_132":153,"_134":49,"_50":160,"_136":137,"_138":149,"_139":159,"_140":59,"_141":77},963300825,[158],{"_117":118,"_109":144,"_119":93,"_120":149,"_122":150,"_124":125,"_126":93,"_127":-5,"_128":145,"_56":59,"_129":-5},"2025-08-29T05:02:00.822599Z","1.1.23",{"_106":37,"_107":152,"_109":162,"_111":163,"_85":164,"_114":165,"_43":169,"_131":152,"_132":153,"_134":49,"_50":170,"_136":137,"_138":167,"_139":169,"_140":59,"_141":77},"sha256:5fadfd8e5bb59fe2e744d1e38c6e75f58603544c7d559af7946c06e7da7ca601",155870785,865271464,[166],{"_117":118,"_109":162,"_119":93,"_120":167,"_122":168,"_124":125,"_126":93,"_127":-5,"_128":163,"_56":59,"_129":-5},"2026-03-24T22:43:35.320607318Z","2025-03-16T16:33:42.959659324Z","2025-03-16T16:33:43.230249Z","1.1.22",{"_106":37,"_107":108,"_109":172,"_111":173,"_85":174,"_114":175,"_43":179,"_131":108,"_132":133,"_134":49,"_50":180,"_136":137,"_138":177,"_139":179,"_140":59,"_141":77},"sha256:f9d56c0d82f8a569a114a050e13e2c86408f0f8e93182704b845fe922113e952",192570822,847933126,[176],{"_117":118,"_109":172,"_119":93,"_120":177,"_122":178,"_124":125,"_126":93,"_127":-5,"_128":173,"_56":59,"_129":-5},"2026-03-07T09:23:38.164686939Z","2025-02-14T00:29:58.45637557Z","2025-02-14T00:29:58.756613Z","1.1.21",{"_106":37,"_107":108,"_109":182,"_111":183,"_85":184,"_114":185,"_43":189,"_131":108,"_132":133,"_134":49,"_50":190,"_136":137,"_138":187,"_139":189,"_140":59,"_141":77},"sha256:db38eac8866e1c389e539738aeef757ab9874d086e79e0051a506060809a3c30",149485611,818232376,[186],{"_117":118,"_109":182,"_119":93,"_120":187,"_122":188,"_124":125,"_126":93,"_127":-5,"_128":183,"_56":59,"_129":-5},"2026-03-11T16:21:18.591441789Z","2024-12-22T19:59:05Z","2024-12-22T19:59:04.080194Z","1.1.20",{"_106":37,"_107":108,"_109":192,"_111":193,"_85":194,"_114":195,"_43":199,"_131":108,"_132":133,"_134":49,"_50":200,"_136":137,"_138":197,"_139":199,"_140":59,"_141":77},"sha256:3f1af6f2375c8f31401007619aa7b1ffc2e7c1f051205f596dbedd497914d7bc",149485991,814782707,[196],{"_117":118,"_109":192,"_119":93,"_120":197,"_122":198,"_124":125,"_126":93,"_127":-5,"_128":193,"_56":59,"_129":-5},"2026-03-09T12:48:16.944788622Z","2024-12-16T19:45:03Z","2024-12-16T19:45:02.6992Z","andrew",{"_106":37,"_107":152,"_109":202,"_111":203,"_85":204,"_114":205,"_43":210,"_131":152,"_132":153,"_134":49,"_50":211,"_136":137,"_138":207,"_139":210,"_140":209,"_141":77},"sha256:b142ee4903b7762d1f14c39433dfef746659818db1c7341a6e5104347ea55aec",146616282,774983143,[206],{"_117":118,"_109":202,"_119":93,"_120":207,"_122":208,"_124":125,"_126":93,"_127":-5,"_128":203,"_56":209,"_129":-5},"2025-10-29T07:19:12.414559371Z","2024-10-15T15:03:18Z","inactive","2024-10-15T15:03:17.197426Z","1.1.19",{"_106":37,"_107":152,"_109":213,"_111":214,"_85":215,"_114":216,"_43":220,"_131":152,"_132":153,"_134":49,"_50":221,"_136":137,"_138":218,"_139":220,"_140":59,"_141":77},"sha256:b875a93d2baef017c61bde6a98c18ff37dca788337c7556c6d01661cbeb93187",145809080,692101397,[217],{"_117":118,"_109":213,"_119":93,"_120":218,"_122":219,"_124":125,"_126":93,"_127":-5,"_128":214,"_56":59,"_129":-5},"2026-03-28T19:57:31.213420704Z","2024-05-24T09:23:00Z","2024-06-08T07:18:03.070172Z","1.1.18",{"_106":37,"_107":223,"_109":224,"_111":225,"_85":226,"_114":227,"_43":231,"_131":223,"_132":232,"_134":49,"_50":233,"_136":137,"_138":229,"_139":231,"_140":59,"_141":77},137492,"sha256:9ee31561400010b15c73cec122345017f6759cc8380bd8ba49d08bdc17a311fd",148426401,619297214,[228],{"_117":118,"_109":224,"_119":93,"_120":229,"_122":230,"_124":125,"_126":93,"_127":-5,"_128":225,"_56":59,"_129":-5},"2026-03-09T12:47:43.441204228Z","2024-03-11T23:34:22Z","2024-03-11T23:35:02.840315Z","kayvan","20240311_01","isPotentialSpam","routes/_layout.r.$namespace.$reponame.builds",{"_24":11,"_29":-5},"actionData","errors"]