Advanced Page Building and Element Configuration

  1. Home
  2. Site Edits
  3. Basics
  4. Advanced Page Building and Element Configuration

This article covers more advanced topics regarding the most commonly used elements (text, image, carousel, grid, etc).

If you have not done so yet, please review the following article, its contents include basic information that this article assumes you are already comfortable with: Logging In/Editing Page Content.

Quick Navigation

Rows & Columns

Starting off we will be discussing the edit menu for rows and columns. Here is a quick refresher on the distinction between them as well as how to reach the edit menu:

Rows vs Columns: Rows span from side to side in the editor and can be broken up into multiple Columns.

Shown below is an outer row boxed in red and an inner row boxed in blue:

Take note of the pencil on both of these that allows you to edit the settings for either row.

Shown below are the various columns in this example:

For columns, the edit pencil appears at the top when hovering over that column.

Editing rows/columns settings will be covered in another article, but the definitions are important for clarity.

We will begin from here with the row menu, specifically, the outer row (they are different!):

The first tab that will open up is the general tab.

General Tab

Red – Spacing

Content Width: Controls the overall maximum width of the content for desktop users. Full width automatically sizes the content to the maximum width for the viewing device. This setting often requires some amount of spacing to be set manually within the design tab.

Vertical Indents: Simple as it sounds, controls the amount of vertical spacing placed on the top and bottom of the entire row and all its columns.

Full Height Row: Toggling this option makes it so that the given row will automatically take up the full vertical height of the screen for any device. This is ideal for large banners. This is most commonly used on the homepage for the lander.

Blue – Colors and Background

Row Color Style: Changes the overall color pallet between a couple of options. Pulls the colors from your color settings in the Theme Options. If you need some visual breaks, it often looks good to alternate rows between Content Colors and Alternate Content Colors. You can also use Shape Dividers to break up content if you want something more significant (covered later in this section).

Background Image: Allows you to set a background image to the row. Custom lets you select one from the media library or upload one. Featured Image uses the currently set featured image.

There are various settings that will appear after selecting one of these options, you can tweak these to get the image as you wish.

Overall, we recommend “Fit to area”, no repeating, and in the center as a starting point; but each image may have different needs. Sometimes its easiest to crop the image and reupload if you are struggling to get a specific portion of the image to show. Just crop out the parts you don’t wish to see.

Show on Background: This allows you to display either video or a rotating image slideshow, rather than a single static image. This works great for title sections, landers, and similar designs.

Background Overlay: Allows you to set a colored overlay over the entire background. This lets you darken or washout images to give better contrast for text (or just set a background color). Click in the checkered area to open the color picker, select a color, then use the bar on the right side of the color menu to turn down the opacity to your liking.

Green – Advanced

Sticky Row: Toggling this option on makes the row stick to the top of the screen when you scroll past it on the page. Has specific uses, but can be good for small callouts that you want to follow the user down the page after reaching it. This feature is not particularly mobile friendly.

Row Title: Lets you set titles for rows, purely aesthetic for the builder. The name you set here will appear in the grey bar at the top of the row.

Columns Tab

Gap Between Columns: Used to influence amount of spacing to use between columns when a row is set to use more than one column.

Equal Columns Content Height: Enable to make all columns of this row share the height of the tallest column in the row. Useful when you have background colors on column sections with text of varying length inside.

Columns Content Position: Sets the vertical position where content is generated within the row.

Add Padding Around Columns Content: Useful when things get too scrunched and you need to quickly be able to add spacing. When this fails you will need to use the design tab instead and manual spacing settings to achieve what you need.

Reverse Order For Column Stacking: Column stacking occurs when the screen viewing the page is too narrow to display multiple columns in the same row, such as on mobile or tablet. In this case columns are stacked from left to right unless this setting is enabled which makes them stack in reverse. This is useful when you have alternating left and right text/image columns on desktop, but need the photos to be in a normal order on mobile.

Ignore the Columns Stacking Width Option: Enable this to stop automatic column stacking. Turning this on will almost certainly require a lot of attention to the spacing settings in design to make the multi column setup work for mobile.

The design tab is covered in detail here.

Shape Dividers

Shape dividers can be used to break up your content in a visually engaging way.

As shown above, you can enable shape dividers on the bottom, top, or both at the same time. This places the selected shape at the top/bottom of the row directly against the next row.

The height setting can be used to change the overall height of the generated shape. 100vmin is 100% of the screen height, 10vmin being 10%. Vmin is the most common measurement used to set height as its easy to use on a 100 scale, and it reacts to screen size changes.

Overlap the content of this row can be toggled on to make the shape divider fit more tightly with existing content and not add any additional padding that wasn’t already there.

This can cause overlap, but the divider is sometimes a bit overzealous with the spacing if this isn’t turned on. If it needs to be on and there are overlap issues, you will need to add some padding to the row at the top or bottom respectively (from the design tab).

Scrolling Effects

Same for all elements. Covered here.

Display Logic

Same for all elements. Covered here.

Design

Same for all elements. Covered here.

Scrolling Effects

Scrolling effects are animations which can be added and triggered by the page scrolling, which can give your site a very modern and alive feel.

Examples of what options you can enable are shown above and wont appear until you enable effects using the main scrolling effects toggle. Generally the effects work as you would expect but it almost always requires a bit of work to find what looks good. If you’re interested in adding this to your site I recommend playing around with it for a bit until you find something you are happy with.

Vertical Shift: Moves the element up/down as you scroll

Horizontal Shift: Moves the element right/left as you scroll

Transparency: Changes the elements alpha value as you scroll, making it become more or less see through.

Blur: Changes the amount of blur applied to the element as you scroll.

Scale: Changes the size of the element as you scroll.

Display Logic

Allows you to set conditions to allow/disallow the element to show. By default all elements are set to ‘always’ for the Display This Element setting. Changing this using the dropdown lets you choose to display the element either if all conditions are met, or if any condition is met, from a list of variables (also shown above).

These all have their specific use cases, but the most useful among them is usually Inner List/Carousel has items. This allows you to hide a row or column altogether if it lacks any items to display.

Another example is when you have a page template that you use for many pages, but on only certain pages you want it to have an additional section that does not appear on the other pages, you could configure that with this menu and it would be much easier still than adding the new section to each page individually.

The Design Tab

This menu is found when you click the pencil icon on almost any element to edit it. It offers various ways to influence said element, and the options here will be the same for anything that features the design tab on your site.

Most commonly, the design tab is used to edit the text inside text elements, background color and background images, and spacing among other things.

Of note at the very top, the copy/paste buttons can be used to copy all design settings from one element to another.

Once you have opened any of the tabs, by clicking the button shown below you can also enable device specific settings. This is especially useful when you need to make tweaks for tablets or mobile. You will likely use this most on the text, sizes, and spacing menus.

After that you can use the black menu that pops up to select different screen sizes and set them individually. After enabling this you will need to set each screen size individually. Its recommended to go back and do this “mobile pass” last so you aren’t stuck reentering settings that don’t change between screen sizes four different times.

Below, we will go through each tab in order.

Text

These options are primarily only useful for text based elements or elements that have text inside them somewhere. You can influence text size, color, font, and spacing among other things.

Leaving options blank will cause them to use the site settings, so this will usually give the most uniform look with the rest of your site, but sometimes you need to make text stand out a bit extra.

For colors, you can select from your sites saved colors by hovering over the color selection area and clicking the dynamic values button, shown below.

This dynamic values button is present on all colors selectors and is very helpful with keeping colors uniform.

For more information about setting text size, jump to sizes

Background

Allows you to set a background image or color behind an element. Most commonly this is used when setting a background for an entire row or column when creating visual breaks and contrast in designs.

Clicking inside the large plus button area allows you to select a photo to add.

The background color can be set in the same way as the color field in text and makes a square background behind whatever element its applied to. The background area can be expanded through the spacing menu (padding specifically, margin is outside the colored area), and the square block can be made round via the border menu by setting a border radius (no actual border is needed to make the corners round).

Sizes

From here you can manipulate the overall size of elements, be it horizontal size or vertical size.

Do not use these settings to try to resize text size. Those settings are inside the text tab.

Width and Height will set static values that the element wont be able to stray from. Sometimes this works well, but other times its better to use the max or min settings so that the element can resize when necessary (especially for photos). When using max and min, usually its best to set only max, but if you find its making the area too small sometimes, you will need to set a lower bound to the min.

In general, sizing for web elements can be difficult. Horizontal and vertical respond differently to different measurement types and some are better suited to one than the other.

Measurements

For example, percentage based measurements are great on horizontal and translate well to mobile, but only work on vertical if you have already set a static vertical size to the parent container of the element you’re resizing.

Below are some of the most common measurements used:

Px: Pixel based measurement, sets size using a number of pixels. Commonly used to set text size for body text.

Common body text sizes are 14-18 px, but leaving the setting blank will allow the text to use the sites general settings so it matches.

Rem: Rem stands for “root em,” a relative unit of measurement tied directly to the font size of the document’s root. This measurement reacts to screen size and gets smaller on mobile and larger on desktop and bigger devices. Commonly used for header text sizes, section height settings, and general spacing.

Common header sizes are between 2-4rem, with additional spacing usually being between 1-3rem depending on your sites look.

Percent based (XX%): Recommended for horizontal size settings only, uses the calculated outer container size to determine the size of the element based on the percentage given. For example, if the width is set to 20%, the element will take up 20% of the total available space.

This can be particularly useful when you need multiple items in a horizontal wrapper to all fit side by side without moving to the next row. By ensuring all elements add to 100% or less everything will continue fitting on one row.

Vmin: Practically the percentage of vertical. 100vmin uses the full height of the screen based on calculated values from the value, 10vmin uses only 10% of the screen. Unlike percentage, vmin does not require manipulation of the outer container height so its always advised to use it over percentage on vertical.

Vw: Same as Vmin, except made for use in horizontal situations.

Spacing

Spacing lets you add additional blank space around elements. You can use the measurement units covered just above inside the sizes section.

Spacing will be applied slightly differently depending on if you add it to the margin or to the padding section.

You can think of Margin as adding to spacing to the outside of the element. If the element has any background color applied, the spacing will be added OUTSIDE the background and the color will not be extended.

Padding on the other hand is added to the ‘interior’ of the element, therefore extending any background or effects added to that element.

Border

This menu allows you to create borders around elements.

By default, the border dropdown will be set to None, for the example photo I selected a border type so that it would display the border options (they are hidden when set to no border).

The first field of note is the border radius, this can sometimes be useful even when you aren’t planning on applying an actual border. By applying a border radius to an element with a background color applied you can round the edges of the background, even with border set to none. Typically you will want a setting somewhere between 0.5 and 1.5 rem for this.

If you are applying a border, then you can use the dropdown to choose from a few different types. After selecting a type just set the border widths as necessary. Typically borders are kept rather thin, around 1-2px, but some more advanced page building techniques may use borders to add visual breaks on pages which might require a thicker border and potentially use of rems.

Color can also be set using the color picker at the bottom.

Position

This menu allows you to influence the position of an element on the page. One of the less used menus, and can be difficult to use effectively.

Using the dropdown you can select different position attributes to apply to the elements. These properties effect how browsers lay out the element in question.

Default – Uses the position setting already provided by the theme or browser.
Static – The normal page layout. The item appears in order with everything else, and offset controls like top/right/bottom/left won’t work.
Relative – Keeps its normal place in the layout but allows you to nudge it from that position. Often also used as a reference point for absolute elements inside it.
Absolute – Removes the item from the normal layout and lets you place it precisely inside its nearest positioned container. Other content behaves as though it isn’t there.
Fixed – Attaches the item to the browser window. It stays in the same spot when the page is scrolled—useful for floating buttons.
Sticky – Behaves normally until scrolling reaches a chosen position, then stays there until its containing section ends—useful for sticky headers or sidebars.

From there, use the Top, Right, Bottom, and Left fields to adjust the element’s position. Achieving a specific placement may take a few attempts as you fine-tune these values.

Keep in mind that positioning also depends on where the element is located within the WPBakery page structure. In most cases, the key factor is its parent—the row, column, or container directly surrounding the element you’re moving.

For example, if you set an image to Absolute and position it 20px from the top and right, those measurements are usually based on its parent container—not the entire page. Moving the image into a different row or column could therefore change its position, even if the Top and Right values remain the same.

Finally, you can adjust the Z-index to control which element appears in front when elements overlap. Think of the page as a stack of transparent sheets, all overlapping in different ways: an element with a higher Z-index is placed on a sheet closer to you, so it appears in front of elements with lower values.

Text Shadow

The Horizontal and Vertical offset settings control the shadow’s position. These values can be positive or negative, depending on the direction in which you want the shadow to fall. Subtle offsets of approximately 1–3 pixels are generally a good starting point.

The Blur setting controls the sharpness of the shadows edge. Set it to zero for a sharp, clearly defined shadow, or increase it to create a softer, more diffused effect.

Finally, use the color selector in the bottom-right corner to choose the shadow’s color and transparency.

Box Shadow

Allows you to add a shadow around an element’s outer container.

The available settings work much like the text-shadow controls described above, except the shadow is applied to the element’s box rather than its text.

The only additional setting is Spread. Spread controls the overall size of the shadow before any blur is applied. A positive value expands the shadow outward, while a negative value contracts it toward the element.

Box shadows are commonly paired with a background color to help an element stand out or appear raised above the page. They also follow the element’s border radius, allowing the shadow to match rounded corners.

Overflow

The Overflow setting controls what happens when an element’s content extends beyond the boundaries of its container.

Visible allows the extra content to extend outside the container, while Hidden clips anything that passes beyond its edges. Scroll always adds scrollbars, and Auto adds them only when the content does not fit. The default option inherits the behavior already defined by the theme or element. Overflow is commonly set to Hidden when containing oversized images, animations, or content within rounded corners.

The optional Clip-path field provides more precise control by limiting the element to a custom shape, such as a circle, ellipse, or polygon. Anything outside the defined shape is hidden. This is an advanced CSS feature and is generally only needed when creating decorative or unusually shaped elements.

Transformation

This advanced menu allows you to visually move, resize, rotate, or skew an element without changing its original position in the page layout.

For example, translateY(-50%) moves an element upward by half its own height, scale(1.2) enlarges it by 20%, and rotate(90deg) turns it 90 degrees. Multiple transformations can also be combined in the same field.

The Transform Origin setting determines the point from which the transformation occurs. By default, transformations generally use the element’s center as their origin. Changing this to a location such as top left or bottom right alters how the element rotates or scales, similar to moving the hinge or anchor point on an object.

Generally speaking, we recommend this as a last resort when trying to position elements, more suited to highly advanced designs. Most, if not all things can be accomplished through correct use of spacing.

Animation

Allows you to apply an entrance effect to an element when it enters the browser’s visible area.

Depending on the selected effect, the element may fade, slide, zoom, or rotate into view. Select None if the element should appear normally without animation.

The Animation Delay controls how long the browser waits before starting the effect. Values can be entered in milliseconds, such as 250ms, or seconds, such as 0.5s. Delays can be useful for staggering several nearby elements and giving the site a more ‘alive’ feel, but should generally be kept short so the content does not feel slow or unresponsive. Internet goers are impatient!

Internet
Goers
Are
Impatient,
…
So
Don’t
Make
Them
Wait!

Additional Options

Found at the bottom below the other accordion tabs inside design are the additional options.

The Extra Class field allows you to assign one or more custom CSS classes to the element. These classes can then be used to apply custom styling or target the element with JavaScript. Enter class names without a period, and separate multiple classes with spaces.

The Element ID field assigns a unique identifier to the element. IDs are commonly used to create direct links to a specific section of a page or to target an individual element with CSS or JavaScript. Enter the ID without a #, avoid spaces, and do not use the same ID for multiple elements on one page.

Custom HTML Attributes allow advanced information to be added directly to the element’s HTML. These may include accessibility labels, custom data attributes, or settings used by third-party scripts. This option is generally unnecessary unless a particular integration or customization requires it.

The Hide On options control which screen sizes display the element. Selecting a device category hides the element when the browser falls within that width range. Multiple categories can be selected, making it possible to create separate desktop and mobile versions of the same content or remove an element from layouts where it does not fit properly.

Grids and Lists

While the menu may vary slightly depending on your Impreza/WPBakery version, generally the editor for grids/lists will look like so:

You May Be Interested In…

Editing Images

This article covers the most common methods you will need to use to edit images on your site of varying…

Appnet Alert Bar

This article goes over making changes to our in-house custom header alert bar, a plugin we created to make it…

Search by Topic

Share This

Previous Post
Editing Images
Next Post
Reusable Blocks for Repeating Content