NAS-115194 / Merge Linux v5.10.105#26
Merged
Merged
Conversation
[ Upstream commit 42a7996 ] Add IEEE80211_TX_STAT_NOACK_TRANSMITTED to tx_status flags to have proper statistics for non-acked frames. Signed-off-by: Benjamin Beichler <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit cacfddf ] In mac80211_hwsim, the probe_req frame is created and sent while scanning. It is sent with ieee80211_tx_info which is not initialized. Uninitialized ieee80211_tx_info can cause problems when using mac80211_hwsim with wmediumd. wmediumd checks the tx_rates field of ieee80211_tx_info and doesn't relay probe_req frame to other clients even if it is a broadcasting message. Call ieee80211_tx_prepare_skb() to initialize ieee80211_tx_info for the probe_req that is created by hw_scan_work in mac80211_hwsim. Signed-off-by: JaeMan Park <[email protected]> Link: https://lore.kernel.org/r/[email protected] [fix memory leak] Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 9495b9b ] The CLKT register contains at poweron 0x40, which at our typical 100kHz bus rate means .64ms. But there is no specified limit to how long devices should be able to stretch the clocks, so just disable the timeout. We still have a timeout wrapping the entire transfer. Signed-off-by: Eric Anholt <[email protected]> Signed-off-by: Stefan Wahren <[email protected]> BugLink: raspberrypi/linux#3064 Signed-off-by: Wolfram Sang <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit a6d7866 ] The current rt5668_jack_detect_handler() assumes the component and card will always show up and implements an infinite usleep loop waiting for them to show up. This does not hold true if a codec interrupt (or other event) occurs when the card is unbound. The codec driver's remove or shutdown functions cannot cancel the workqueue due to the wait loop. As a result, code can either end up blocking the workqueue, or hit a kernel oops when the card is freed. Fix the issue by rescheduling the jack detect handler in case the card is not ready. In case card never shows up, the shutdown/remove/suspend calls can now cancel the detect task. Signed-off-by: Kai Vehmanen <[email protected]> Reviewed-by: Bard Liao <[email protected]> Reviewed-by: Ranjani Sridharan <[email protected]> Reviewed-by: Pierre-Louis Bossart <[email protected]> Reviewed-by: Péter Ujfalusi <[email protected]> Reviewed-by: Shuming Fan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 4c33de0 ] The current rt5682_jack_detect_handler() assumes the component and card will always show up and implements an infinite usleep loop waiting for them to show up. This does not hold true if a codec interrupt (or other event) occurs when the card is unbound. The codec driver's remove or shutdown functions cannot cancel the workqueue due to the wait loop. As a result, code can either end up blocking the workqueue, or hit a kernel oops when the card is freed. Fix the issue by rescheduling the jack detect handler in case the card is not ready. In case card never shows up, the shutdown/remove/suspend calls can now cancel the detect task. Signed-off-by: Kai Vehmanen <[email protected]> Reviewed-by: Bard Liao <[email protected]> Reviewed-by: Ranjani Sridharan <[email protected]> Reviewed-by: Pierre-Louis Bossart <[email protected]> Reviewed-by: Péter Ujfalusi <[email protected]> Reviewed-by: Shuming Fan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 4e2a354 ] The check done by regulator_late_cleanup() to detect whether a regulator is on was inconsistent with the check done by _regulator_is_enabled(). While _regulator_is_enabled() takes the enable GPIO into account, regulator_late_cleanup() was not doing that. This resulted in a false positive, e.g. when a GPIO-controlled fixed regulator was used, which was not enabled at boot time, e.g. reg_disp_1v2: reg_disp_1v2 { compatible = "regulator-fixed"; regulator-name = "display_1v2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; gpio = <&tlmm 148 0>; enable-active-high; }; Such regulator doesn't have an is_enabled() operation. Nevertheless it's state can be determined based on the enable GPIO. The check in regulator_late_cleanup() wrongly assumed that the regulator is on and tried to disable it. Signed-off-by: Oliver Barta <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 37ef4c1 ] Buttonpads are expected to map the INPUT_PROP_BUTTONPAD property bit and the BTN_LEFT key bit. As explained in the specification, where a device has a button type value of 0 (click-pad) or 1 (pressure-pad) there should not be discrete buttons: https://docs.microsoft.com/en-us/windows-hardware/design/component-guidelines/touchpad-windows-precision-touchpad-collection#device-capabilities-feature-report However, some drivers map the BTN_RIGHT and/or BTN_MIDDLE key bits even though the device is a buttonpad and therefore does not have those buttons. This behavior has forced userspace applications like libinput to implement different workarounds and quirks to detect buttonpads and offer to the user the right set of features and configuration options. For more information: https://gitlab.freedesktop.org/libinput/libinput/-/merge_requests/726 In order to avoid this issue clear the BTN_RIGHT and BTN_MIDDLE key bits when the input device is register if the INPUT_PROP_BUTTONPAD property bit is set. Notice that this change will not affect udev because it does not check for buttons. See systemd/src/udev/udev-builtin-input_id.c. List of known affected hardware: - Chuwi AeroBook Plus - Chuwi Gemibook - Framework Laptop - GPD Win Max - Huawei MateBook 2020 - Prestigio Smartbook 141 C2 - Purism Librem 14v1 - StarLite Mk II - AMI firmware - StarLite Mk II - Coreboot firmware - StarLite Mk III - AMI firmware - StarLite Mk III - Coreboot firmware - StarLabTop Mk IV - AMI firmware - StarLabTop Mk IV - Coreboot firmware - StarBook Mk V Acked-by: Peter Hutterer <[email protected]> Acked-by: Benjamin Tissoires <[email protected]> Acked-by: Jiri Kosina <[email protected]> Signed-off-by: José Expósito <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 5bfa685 ] It appears that a read access to GIC[DR]_I[CS]PENDRn doesn't always result in the pending interrupts being accurately reported if they are mapped to a HW interrupt. This is particularily visible when acking the timer interrupt and reading the GICR_ISPENDR1 register immediately after, for example (the interrupt appears as not-pending while it really is...). This is because a HW interrupt has its 'active and pending state' kept in the *physical* distributor, and not in the virtual one, as mandated by the spec (this is what allows the direct deactivation). The virtual distributor only caries the pending and active *states* (note the plural, as these are two independent and non-overlapping states). Fix it by reading the HW state back, either from the timer itself or from the distributor if necessary. Reported-by: Ricardo Koller <[email protected]> Tested-by: Ricardo Koller <[email protected]> Reviewed-by: Ricardo Koller <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 143de8d ] msg_data_sz return a 32bit value, but size is 16bit. This may lead to a bit overflow. Signed-off-by: Hangyu Hua <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 3d6cc98 ] When cifs_get_root() fails during cifs_smb3_do_mount() we call deactivate_locked_super() which eventually will call delayed_free() which will free the context. In this situation we should not proceed to enter the out: section in cifs_smb3_do_mount() and free the same resources a second time. [Thu Feb 10 12:59:06 2022] BUG: KASAN: use-after-free in rcu_cblist_dequeue+0x32/0x60 [Thu Feb 10 12:59:06 2022] Read of size 8 at addr ffff888364f4d110 by task swapper/1/0 [Thu Feb 10 12:59:06 2022] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G OE 5.17.0-rc3+ #4 [Thu Feb 10 12:59:06 2022] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.0 12/17/2019 [Thu Feb 10 12:59:06 2022] Call Trace: [Thu Feb 10 12:59:06 2022] <IRQ> [Thu Feb 10 12:59:06 2022] dump_stack_lvl+0x5d/0x78 [Thu Feb 10 12:59:06 2022] print_address_description.constprop.0+0x24/0x150 [Thu Feb 10 12:59:06 2022] ? rcu_cblist_dequeue+0x32/0x60 [Thu Feb 10 12:59:06 2022] kasan_report.cold+0x7d/0x117 [Thu Feb 10 12:59:06 2022] ? rcu_cblist_dequeue+0x32/0x60 [Thu Feb 10 12:59:06 2022] __asan_load8+0x86/0xa0 [Thu Feb 10 12:59:06 2022] rcu_cblist_dequeue+0x32/0x60 [Thu Feb 10 12:59:06 2022] rcu_core+0x547/0xca0 [Thu Feb 10 12:59:06 2022] ? call_rcu+0x3c0/0x3c0 [Thu Feb 10 12:59:06 2022] ? __this_cpu_preempt_check+0x13/0x20 [Thu Feb 10 12:59:06 2022] ? lock_is_held_type+0xea/0x140 [Thu Feb 10 12:59:06 2022] rcu_core_si+0xe/0x10 [Thu Feb 10 12:59:06 2022] __do_softirq+0x1d4/0x67b [Thu Feb 10 12:59:06 2022] __irq_exit_rcu+0x100/0x150 [Thu Feb 10 12:59:06 2022] irq_exit_rcu+0xe/0x30 [Thu Feb 10 12:59:06 2022] sysvec_hyperv_stimer0+0x9d/0xc0 ... [Thu Feb 10 12:59:07 2022] Freed by task 58179: [Thu Feb 10 12:59:07 2022] kasan_save_stack+0x26/0x50 [Thu Feb 10 12:59:07 2022] kasan_set_track+0x25/0x30 [Thu Feb 10 12:59:07 2022] kasan_set_free_info+0x24/0x40 [Thu Feb 10 12:59:07 2022] ____kasan_slab_free+0x137/0x170 [Thu Feb 10 12:59:07 2022] __kasan_slab_free+0x12/0x20 [Thu Feb 10 12:59:07 2022] slab_free_freelist_hook+0xb3/0x1d0 [Thu Feb 10 12:59:07 2022] kfree+0xcd/0x520 [Thu Feb 10 12:59:07 2022] cifs_smb3_do_mount+0x149/0xbe0 [cifs] [Thu Feb 10 12:59:07 2022] smb3_get_tree+0x1a0/0x2e0 [cifs] [Thu Feb 10 12:59:07 2022] vfs_get_tree+0x52/0x140 [Thu Feb 10 12:59:07 2022] path_mount+0x635/0x10c0 [Thu Feb 10 12:59:07 2022] __x64_sys_mount+0x1bf/0x210 [Thu Feb 10 12:59:07 2022] do_syscall_64+0x5c/0xc0 [Thu Feb 10 12:59:07 2022] entry_SYSCALL_64_after_hwframe+0x44/0xae [Thu Feb 10 12:59:07 2022] Last potentially related work creation: [Thu Feb 10 12:59:07 2022] kasan_save_stack+0x26/0x50 [Thu Feb 10 12:59:07 2022] __kasan_record_aux_stack+0xb6/0xc0 [Thu Feb 10 12:59:07 2022] kasan_record_aux_stack_noalloc+0xb/0x10 [Thu Feb 10 12:59:07 2022] call_rcu+0x76/0x3c0 [Thu Feb 10 12:59:07 2022] cifs_umount+0xce/0xe0 [cifs] [Thu Feb 10 12:59:07 2022] cifs_kill_sb+0xc8/0xe0 [cifs] [Thu Feb 10 12:59:07 2022] deactivate_locked_super+0x5d/0xd0 [Thu Feb 10 12:59:07 2022] cifs_smb3_do_mount+0xab9/0xbe0 [cifs] [Thu Feb 10 12:59:07 2022] smb3_get_tree+0x1a0/0x2e0 [cifs] [Thu Feb 10 12:59:07 2022] vfs_get_tree+0x52/0x140 [Thu Feb 10 12:59:07 2022] path_mount+0x635/0x10c0 [Thu Feb 10 12:59:07 2022] __x64_sys_mount+0x1bf/0x210 [Thu Feb 10 12:59:07 2022] do_syscall_64+0x5c/0xc0 [Thu Feb 10 12:59:07 2022] entry_SYSCALL_64_after_hwframe+0x44/0xae Reported-by: Shyam Prasad N <[email protected]> Reviewed-by: Shyam Prasad N <[email protected]> Signed-off-by: Ronnie Sahlberg <[email protected]> Signed-off-by: Steve French <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 21bffcb ] seccomp_bpf failed on tests 47 global.user_notification_filter_empty and 48 global.user_notification_filter_empty_threaded when it's tested on updated kernel but with old kernel headers. Because old kernel headers don't have definition of macro __NR_clone3 which is required for these two tests. Since under selftests/, we can install headers once for all tests (the default INSTALL_HDR_PATH is usr/include), fix it by adding usr/include to the list of directories to be searched. Use "-isystem" to indicate it's a system directory as the real kernel headers directories are. Signed-off-by: Sherry Yang <[email protected]> Tested-by: Sherry Yang <[email protected]> Reviewed-by: Kees Cook <[email protected]> Signed-off-by: Shuah Khan <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 455896c ] pm_runtime_get_() increments the runtime PM usage counter even when it returns an error code, thus a matching decrement is needed on the error handling path to keep the counter balanced. Signed-off-by: Yongzhi Liu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 0b0dcb3 ] Driver builds fine with COMPILE_TEST. Enable it for wider test coverage and easier maintenance. Signed-off-by: Wolfram Sang <[email protected]> Acked-by: Michal Simek <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 5de7179 ] Driver builds fine with COMPILE_TEST. Enable it for wider test coverage and easier maintenance. Signed-off-by: Wolfram Sang <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 21e8a96 ] Add quirk CDC_MBIM_FLAG_AVOID_ALTSETTING_TOGGLE for Telit FN990 0x1071 composition in order to avoid bind error. Signed-off-by: Daniele Palmas <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
commit 89f3594 upstream. dev->buf does not need to be released if it already exists before executing dev_config. Acked-by: Alan Stern <[email protected]> Signed-off-by: Hangyu Hua <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 501e38a upstream. dev->config and dev->hs_config and dev->dev need to be cleaned if dev_config fails to avoid UAF. Acked-by: Alan Stern <[email protected]> Signed-off-by: Hangyu Hua <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
[ Upstream commit 7dee6f5 ] Also add a local "struct exfat_inode_info *ei" variable to exfat_truncate() to simplify the code. Signed-off-by: Christophe Vu-Brugier <[email protected]> Signed-off-by: Namjae Jeon <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 92fba08 ] In exfat_truncate(), the computation of inode->i_blocks is wrong if the file is larger than 4 GiB because a 32-bit variable is used as a mask. This is fixed and simplified by using round_up(). Also fix the same buggy computation in exfat_read_root() and another (correct) one in exfat_fill_inode(). The latter was fixed another way last month but can be simplified by using round_up() as well. See: commit 0c336d6 ("exfat: fix incorrect loading of i_blocks for large files") Fixes: 98d9170 ("exfat: add file operations") Cc: [email protected] # v5.7+ Suggested-by: Matthew Wilcox <[email protected]> Reviewed-by: Sungjong Seo <[email protected]> Signed-off-by: Christophe Vu-Brugier <[email protected]> Signed-off-by: Namjae Jeon <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
…nters [ Upstream commit 77360f9 ] Pingfan reported that the following causes a fault: echo "filename ~ \"cpu\"" > events/syscalls/sys_enter_openat/filter echo 1 > events/syscalls/sys_enter_at/enable The reason is that trace event filter treats the user space pointer defined by "filename" as a normal pointer to compare against the "cpu" string. The following bug happened: kvm-03-guest16 login: [72198.026181] BUG: unable to handle page fault for address: 00007fffaae8ef60 #PF: supervisor read access in kernel mode #PF: error_code(0x0001) - permissions violation PGD 80000001008b7067 P4D 80000001008b7067 PUD 2393f1067 PMD 2393ec067 PTE 8000000108f47867 Oops: 0001 [#1] PREEMPT SMP PTI CPU: 1 PID: 1 Comm: systemd Kdump: loaded Not tainted 5.14.0-32.el9.x86_64 #1 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:strlen+0x0/0x20 Code: 48 89 f9 74 09 48 83 c1 01 80 39 00 75 f7 31 d2 44 0f b6 04 16 44 88 04 11 48 83 c2 01 45 84 c0 75 ee c3 0f 1f 80 00 00 00 00 <80> 3f 00 74 10 48 89 f8 48 83 c0 01 80 38 00 75 f7 48 29 f8 c3 31 RSP: 0018:ffffb5b900013e48 EFLAGS: 00010246 RAX: 0000000000000018 RBX: ffff8fc1c49ede00 RCX: 0000000000000000 RDX: 0000000000000020 RSI: ffff8fc1c02d601c RDI: 00007fffaae8ef60 RBP: 00007fffaae8ef60 R08: 0005034f4ddb8ea4 R09: 0000000000000000 R10: ffff8fc1c02d601c R11: 0000000000000000 R12: ffff8fc1c8a6e380 R13: 0000000000000000 R14: ffff8fc1c02d6010 R15: ffff8fc1c00453c0 FS: 00007fa86123db40(0000) GS:ffff8fc2ffd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fffaae8ef60 CR3: 0000000102880001 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: filter_pred_pchar+0x18/0x40 filter_match_preds+0x31/0x70 ftrace_syscall_enter+0x27a/0x2c0 syscall_trace_enter.constprop.0+0x1aa/0x1d0 do_syscall_64+0x16/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fa861d88664 The above happened because the kernel tried to access user space directly and triggered a "supervisor read access in kernel mode" fault. Worse yet, the memory could not even be loaded yet, and a SEGFAULT could happen as well. This could be true for kernel space accessing as well. To be even more robust, test both kernel and user space strings. If the string fails to read, then simply have the filter fail. Note, TASK_SIZE is used to determine if the pointer is user or kernel space and the appropriate strncpy_from_kernel/user_nofault() function is used to copy the memory. For some architectures, the compare to TASK_SIZE may always pick user space or kernel space. If it gets it wrong, the only thing is that the filter will fail to match. In the future, this needs to be fixed to have the event denote which should be used. But failing a filter is much better than panicing the machine, and that can be solved later. Link: https://lore.kernel.org/all/[email protected]/ Link: https://lkml.kernel.org/r/[email protected] Cc: [email protected] Cc: Ingo Molnar <[email protected]> Cc: Andrew Morton <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Tom Zanussi <[email protected]> Reported-by: Pingfan Liu <[email protected]> Tested-by: Pingfan Liu <[email protected]> Fixes: 87a342f ("tracing/filters: Support filtering for char * strings") Signed-off-by: Steven Rostedt <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit d3d079b ] When sending x_char in stm32_usart_transmit_chars(), driver can overwrite the value of TDR register by the value of x_char. If this happens, the previous value that was present in TDR register will not be sent through uart. This code checks if the previous value in TDR register is sent before writing the x_char value into register. Fixes: 48a6092 ("serial: stm32-usart: Add STM32 USART Driver") Cc: stable <[email protected]> Signed-off-by: Valentin Caron <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 5f6b0f2 ] The f_CNT register (at the PCI config. address 0x78) is 16-bit, not 8-bit! The bug was there from the very start... :-( Signed-off-by: Sergey Shtylyov <[email protected]> Fixes: 669a5db ("[libata] Add a bunch of PATA drivers.") Cc: [email protected] Signed-off-by: Damien Le Moal <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit c1a66c3 ] Workstation application ANSA/META v21.1.4 get this error dmesg when running CI test suite provided by ANSA/META: [drm:amdgpu_gem_va_ioctl [amdgpu]] *ERROR* Couldn't update BO_VA (-16) This is caused by: 1. create a 256MB buffer in invisible VRAM 2. CPU map the buffer and access it causes vm_fault and try to move it to visible VRAM 3. force visible VRAM space and traverse all VRAM bos to check if evicting this bo is valuable 4. when checking a VM bo (in invisible VRAM), amdgpu_vm_evictable() will set amdgpu_vm->evicting, but latter due to not in visible VRAM, won't really evict it so not add it to amdgpu_vm->evicted 5. before next CS to clear the amdgpu_vm->evicting, user VM ops ioctl will pass amdgpu_vm_ready() (check amdgpu_vm->evicted) but fail in amdgpu_vm_bo_update_mapping() (check amdgpu_vm->evicting) and get this error log This error won't affect functionality as next CS will finish the waiting VM ops. But we'd better clear the error log by checking the amdgpu_vm->evicting flag in amdgpu_vm_ready() to stop calling amdgpu_vm_bo_update_mapping() later. Another reason is amdgpu_vm->evicted list holds all BOs (both user buffer and page table), but only page table BOs' eviction prevent VM ops. amdgpu_vm->evicting flag is set only for page table BOs, so we should use evicting flag instead of evicted list in amdgpu_vm_ready(). The side effect of this change is: previously blocked VM op (user buffer in "evicted" list but no page table in it) gets done immediately. v2: update commit comments. Acked-by: Paul Menzel <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Qiang Yu <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit f37c3bb ] Since referencing user space pointers is special, if the user wants to filter on a field that is a pointer to user space, then they need to specify it. Add a ".ustring" attribute to the field name for filters to state that the field is pointing to user space such that the kernel can take the appropriate action to read that pointer. Link: https://lore.kernel.org/all/[email protected]/ Fixes: 77360f9 ("tracing: Add test for user space strings when filtering on string pointers") Tested-by: Sven Schnelle <[email protected]> Signed-off-by: Steven Rostedt <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
commit 0aa6b29 upstream. PCM buffers might be allocated dynamically when the buffer preallocation failed or a larger buffer is requested, and it's not guaranteed that substream->dma_buffer points to the actually used buffer. The driver needs to refer to substream->runtime->dma_addr instead for the buffer address. Signed-off-by: Zhen Ni <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit dcf0c83 upstream. The get_boot_hartid_from_fdt() function currently returns U32_MAX for failure case which is not correct because U32_MAX is a valid hartid value. This patch fixes the issue by returning error code. Cc: <[email protected]> Fixes: d707174 ("RISC-V: Add EFI stub support.") Signed-off-by: Sunil V L <[email protected]> Reviewed-by: Heinrich Schuchardt <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit a3d3280 upstream. In order to get the pfn of a struct page* when sparsemem is enabled without vmemmap, the mem_section structures need to be initialized which happens in sparse_init. But kasan_early_init calls pfn_to_page way before sparse_init is called, which then tries to dereference a null mem_section pointer. Fix this by removing the usage of this function in kasan_early_init. Fixes: 8ad8b72 ("riscv: Add KASAN support") Signed-off-by: Alexandre Ghiti <[email protected]> Cc: [email protected] Signed-off-by: Palmer Dabbelt <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit c648c4b upstream. __virt_to_phys function is called very early in the boot process (ie kasan_early_init) so it should not be instrumented by KASAN otherwise it bugs. Fix this by declaring phys_addr.c as non-kasan instrumentable. Signed-off-by: Alexandre Ghiti <[email protected]> Fixes: 8ad8b72 (riscv: Add KASAN support) Cc: [email protected] Signed-off-by: Palmer Dabbelt <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 9bdd10d upstream. While the $val/$val2 values passed in from userspace are always >= 0 integers, the limits of the control can be signed integers and the $min can be non-zero and less than zero. To correctly validate $val/$val2 against platform_max, add the $min offset to val first. Fixes: 817f7c9 ("ASoC: ops: Reject out of bounds values in snd_soc_put_volsw()") Signed-off-by: Marek Vasut <[email protected]> Cc: Mark Brown <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 5ce97f4 upstream. The AMD IOMMU logs I/O page faults and such to a ring buffer in system memory, and this ring buffer can overflow. The AMD IOMMU spec has the following to say about the interrupt status bit that signals this overflow condition: EventOverflow: Event log overflow. RW1C. Reset 0b. 1 = IOMMU event log overflow has occurred. This bit is set when a new event is to be written to the event log and there is no usable entry in the event log, causing the new event information to be discarded. An interrupt is generated when EventOverflow = 1b and MMIO Offset 0018h[EventIntEn] = 1b. No new event log entries are written while this bit is set. Software Note: To resume logging, clear EventOverflow (W1C), and write a 1 to MMIO Offset 0018h[EventLogEn]. The AMD IOMMU driver doesn't currently implement this recovery sequence, meaning that if a ring buffer overflow occurs, logging of EVT/PPR/GA events will cease entirely. This patch implements the spec-mandated reset sequence, with the minor tweak that the hardware seems to want to have a 0 written to MMIO Offset 0018h[EventLogEn] first, before writing an 1 into this field, or the IOMMU won't actually resume logging events. Signed-off-by: Lennert Buytenhek <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joerg Roedel <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Commit 5cadd4b upstream. Instead of __get_free_pages() and free_pages() use alloc_pages_exact() and free_pages_exact(). This is in preparation of a change of gnttab_end_foreign_access() which will prohibit use of high-order pages. By using the local variable "order" instead of ring->intf->ring_order in the error path of xen_9pfs_front_alloc_dataring() another bug is fixed, as the error path can be entered before ring->intf->ring_order is being set. By using alloc_pages_exact() the size in bytes is specified for the allocation, which fixes another bug for the case of order < (PAGE_SHIFT - XEN_PAGE_SHIFT). This is part of CVE-2022-23041 / XSA-396. Reported-by: Simon Gaiser <[email protected]> Signed-off-by: Juergen Gross <[email protected]> Reviewed-by: Jan Beulich <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Commit b0576cc upstream. Instead of __get_free_pages() and free_pages() use alloc_pages_exact() and free_pages_exact(). This is in preparation of a change of gnttab_end_foreign_access() which will prohibit use of high-order pages. This is part of CVE-2022-23041 / XSA-396. Reported-by: Simon Gaiser <[email protected]> Signed-off-by: Juergen Gross <[email protected]> Reviewed-by: Jan Beulich <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Commit 42baefa upstream. gnttab_end_foreign_access() is used to free a grant reference and optionally to free the associated page. In case the grant is still in use by the other side processing is being deferred. This leads to a problem in case no page to be freed is specified by the caller: the caller doesn't know that the page is still mapped by the other side and thus should not be used for other purposes. The correct way to handle this situation is to take an additional reference to the granted page in case handling is being deferred and to drop that reference when the grant reference could be freed finally. This requires that there are no users of gnttab_end_foreign_access() left directly repurposing the granted page after the call, as this might result in clobbered data or information leaks via the not yet freed grant reference. This is part of CVE-2022-23041 / XSA-396. Reported-by: Simon Gaiser <[email protected]> Signed-off-by: Juergen Gross <[email protected]> Reviewed-by: Jan Beulich <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Commit 66e3531 upstream. When calling gnttab_end_foreign_access_ref() the returned value must be tested and the reaction to that value should be appropriate. In case of failure in xennet_get_responses() the reaction should not be to crash the system, but to disable the network device. The calls in setup_netfront() can be replaced by calls of gnttab_end_foreign_access(). While at it avoid double free of ring pages and grant references via xennet_disconnect_backend() in this case. This is CVE-2022-23042 / part of XSA-396. Reported-by: Demi Marie Obenour <[email protected]> Signed-off-by: Juergen Gross <[email protected]> Reviewed-by: Jan Beulich <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
This reverts commit 48e4130 which is commit dc0075b upstream. It's been reported to cause problems with a number of Fedora and Arch Linux users, so drop it for now until that is resolved. Link: https://lore.kernel.org/r/CAJZ5v0gE52NT=4kN4MkhV3Gx=M5CeMGVHOF0jgTXDb5WwAMs_Q@mail.gmail.com Link: https://lore.kernel.org/r/[email protected] Reported-by: Hans de Goede <[email protected]> Reported-by: Rafael J. Wysocki <[email protected]> Cc: Sasha Levin <[email protected]> Cc: Justin Forbes <[email protected]> Cc: Mark Pearson <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Link: https://lore.kernel.org/r/[email protected] Tested-by: Fox Chen <[email protected]> Tested-by: Hulk Robot <[email protected]> Tested-by: Florian Fainelli <[email protected]> Tested-by: Bagas Sanjaya <[email protected]> Tested-by: Pavel Machek (CIP) <[email protected]> Link: https://lore.kernel.org/r/[email protected] Tested-by: Pavel Machek (CIP) <[email protected]> = Tested-by: Salvatore Bonaccorso <[email protected]> Tested-by: Jon Hunter <[email protected]> Tested-by: Shuah Khan <[email protected]> Tested-by: Florian Fainelli <[email protected]> Tested-by: Guenter Roeck <[email protected]> Tested-by: Bagas Sanjaya <[email protected]> Tested-by: Sudip Mukherjee <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
This is the 5.10.105 stable release
Signed-off-by: Umer Saleem <[email protected]>
amotin
approved these changes
Mar 14, 2022
ghost
approved these changes
Mar 14, 2022
umsaleem
pushed a commit
that referenced
this pull request
Mar 28, 2022
[ Upstream commit 4224cfd ] When bringing down the netdevice or system shutdown, a panic can be triggered while accessing the sysfs path because the device is already removed. [ 755.549084] mlx5_core 0000:12:00.1: Shutdown was called [ 756.404455] mlx5_core 0000:12:00.0: Shutdown was called ... [ 757.937260] BUG: unable to handle kernel NULL pointer dereference at (null) [ 758.031397] IP: [<ffffffff8ee11acb>] dma_pool_alloc+0x1ab/0x280 crash> bt ... PID: 12649 TASK: ffff8924108f2100 CPU: 1 COMMAND: "amsd" ... #9 [ffff89240e1a38b0] page_fault at ffffffff8f38c778 [exception RIP: dma_pool_alloc+0x1ab] RIP: ffffffff8ee11acb RSP: ffff89240e1a3968 RFLAGS: 00010046 RAX: 0000000000000246 RBX: ffff89243d874100 RCX: 0000000000001000 RDX: 0000000000000000 RSI: 0000000000000246 RDI: ffff89243d874090 RBP: ffff89240e1a39c0 R8: 000000000001f080 R9: ffff8905ffc03c00 R10: ffffffffc04680d4 R11: ffffffff8edde9fd R12: 00000000000080d0 R13: ffff89243d874090 R14: ffff89243d874080 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #10 [ffff89240e1a39c8] mlx5_alloc_cmd_msg at ffffffffc04680f3 [mlx5_core] #11 [ffff89240e1a3a18] cmd_exec at ffffffffc046ad62 [mlx5_core] #12 [ffff89240e1a3ab8] mlx5_cmd_exec at ffffffffc046b4fb [mlx5_core] #13 [ffff89240e1a3ae8] mlx5_core_access_reg at ffffffffc0475434 [mlx5_core] #14 [ffff89240e1a3b40] mlx5e_get_fec_caps at ffffffffc04a7348 [mlx5_core] #15 [ffff89240e1a3bb0] get_fec_supported_advertised at ffffffffc04992bf [mlx5_core] #16 [ffff89240e1a3c08] mlx5e_get_link_ksettings at ffffffffc049ab36 [mlx5_core] #17 [ffff89240e1a3ce8] __ethtool_get_link_ksettings at ffffffff8f25db46 #18 [ffff89240e1a3d48] speed_show at ffffffff8f277208 #19 [ffff89240e1a3dd8] dev_attr_show at ffffffff8f0b70e3 #20 [ffff89240e1a3df8] sysfs_kf_seq_show at ffffffff8eedbedf #21 [ffff89240e1a3e18] kernfs_seq_show at ffffffff8eeda596 #22 [ffff89240e1a3e28] seq_read at ffffffff8ee76d10 #23 [ffff89240e1a3e98] kernfs_fop_read at ffffffff8eedaef5 #24 [ffff89240e1a3ed8] vfs_read at ffffffff8ee4e3ff #25 [ffff89240e1a3f08] sys_read at ffffffff8ee4f27f #26 [ffff89240e1a3f50] system_call_fastpath at ffffffff8f395f92 crash> net_device.state ffff89443b0c0000 state = 0x5 (__LINK_STATE_START| __LINK_STATE_NOCARRIER) To prevent this scenario, we also make sure that the netdevice is present. Signed-off-by: suresh kumar <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
umsaleem
pushed a commit
that referenced
this pull request
Apr 7, 2022
[ Upstream commit 4224cfd ] When bringing down the netdevice or system shutdown, a panic can be triggered while accessing the sysfs path because the device is already removed. [ 755.549084] mlx5_core 0000:12:00.1: Shutdown was called [ 756.404455] mlx5_core 0000:12:00.0: Shutdown was called ... [ 757.937260] BUG: unable to handle kernel NULL pointer dereference at (null) [ 758.031397] IP: [<ffffffff8ee11acb>] dma_pool_alloc+0x1ab/0x280 crash> bt ... PID: 12649 TASK: ffff8924108f2100 CPU: 1 COMMAND: "amsd" ... #9 [ffff89240e1a38b0] page_fault at ffffffff8f38c778 [exception RIP: dma_pool_alloc+0x1ab] RIP: ffffffff8ee11acb RSP: ffff89240e1a3968 RFLAGS: 00010046 RAX: 0000000000000246 RBX: ffff89243d874100 RCX: 0000000000001000 RDX: 0000000000000000 RSI: 0000000000000246 RDI: ffff89243d874090 RBP: ffff89240e1a39c0 R8: 000000000001f080 R9: ffff8905ffc03c00 R10: ffffffffc04680d4 R11: ffffffff8edde9fd R12: 00000000000080d0 R13: ffff89243d874090 R14: ffff89243d874080 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #10 [ffff89240e1a39c8] mlx5_alloc_cmd_msg at ffffffffc04680f3 [mlx5_core] #11 [ffff89240e1a3a18] cmd_exec at ffffffffc046ad62 [mlx5_core] #12 [ffff89240e1a3ab8] mlx5_cmd_exec at ffffffffc046b4fb [mlx5_core] #13 [ffff89240e1a3ae8] mlx5_core_access_reg at ffffffffc0475434 [mlx5_core] #14 [ffff89240e1a3b40] mlx5e_get_fec_caps at ffffffffc04a7348 [mlx5_core] #15 [ffff89240e1a3bb0] get_fec_supported_advertised at ffffffffc04992bf [mlx5_core] #16 [ffff89240e1a3c08] mlx5e_get_link_ksettings at ffffffffc049ab36 [mlx5_core] #17 [ffff89240e1a3ce8] __ethtool_get_link_ksettings at ffffffff8f25db46 #18 [ffff89240e1a3d48] speed_show at ffffffff8f277208 #19 [ffff89240e1a3dd8] dev_attr_show at ffffffff8f0b70e3 #20 [ffff89240e1a3df8] sysfs_kf_seq_show at ffffffff8eedbedf #21 [ffff89240e1a3e18] kernfs_seq_show at ffffffff8eeda596 #22 [ffff89240e1a3e28] seq_read at ffffffff8ee76d10 #23 [ffff89240e1a3e98] kernfs_fop_read at ffffffff8eedaef5 #24 [ffff89240e1a3ed8] vfs_read at ffffffff8ee4e3ff #25 [ffff89240e1a3f08] sys_read at ffffffff8ee4f27f #26 [ffff89240e1a3f50] system_call_fastpath at ffffffff8f395f92 crash> net_device.state ffff89443b0c0000 state = 0x5 (__LINK_STATE_START| __LINK_STATE_NOCARRIER) To prevent this scenario, we also make sure that the netdevice is present. Signed-off-by: suresh kumar <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
umsaleem
pushed a commit
that referenced
this pull request
Apr 7, 2022
[ Upstream commit 4224cfd ] When bringing down the netdevice or system shutdown, a panic can be triggered while accessing the sysfs path because the device is already removed. [ 755.549084] mlx5_core 0000:12:00.1: Shutdown was called [ 756.404455] mlx5_core 0000:12:00.0: Shutdown was called ... [ 757.937260] BUG: unable to handle kernel NULL pointer dereference at (null) [ 758.031397] IP: [<ffffffff8ee11acb>] dma_pool_alloc+0x1ab/0x280 crash> bt ... PID: 12649 TASK: ffff8924108f2100 CPU: 1 COMMAND: "amsd" ... #9 [ffff89240e1a38b0] page_fault at ffffffff8f38c778 [exception RIP: dma_pool_alloc+0x1ab] RIP: ffffffff8ee11acb RSP: ffff89240e1a3968 RFLAGS: 00010046 RAX: 0000000000000246 RBX: ffff89243d874100 RCX: 0000000000001000 RDX: 0000000000000000 RSI: 0000000000000246 RDI: ffff89243d874090 RBP: ffff89240e1a39c0 R8: 000000000001f080 R9: ffff8905ffc03c00 R10: ffffffffc04680d4 R11: ffffffff8edde9fd R12: 00000000000080d0 R13: ffff89243d874090 R14: ffff89243d874080 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #10 [ffff89240e1a39c8] mlx5_alloc_cmd_msg at ffffffffc04680f3 [mlx5_core] #11 [ffff89240e1a3a18] cmd_exec at ffffffffc046ad62 [mlx5_core] #12 [ffff89240e1a3ab8] mlx5_cmd_exec at ffffffffc046b4fb [mlx5_core] #13 [ffff89240e1a3ae8] mlx5_core_access_reg at ffffffffc0475434 [mlx5_core] #14 [ffff89240e1a3b40] mlx5e_get_fec_caps at ffffffffc04a7348 [mlx5_core] #15 [ffff89240e1a3bb0] get_fec_supported_advertised at ffffffffc04992bf [mlx5_core] #16 [ffff89240e1a3c08] mlx5e_get_link_ksettings at ffffffffc049ab36 [mlx5_core] #17 [ffff89240e1a3ce8] __ethtool_get_link_ksettings at ffffffff8f25db46 #18 [ffff89240e1a3d48] speed_show at ffffffff8f277208 #19 [ffff89240e1a3dd8] dev_attr_show at ffffffff8f0b70e3 #20 [ffff89240e1a3df8] sysfs_kf_seq_show at ffffffff8eedbedf #21 [ffff89240e1a3e18] kernfs_seq_show at ffffffff8eeda596 #22 [ffff89240e1a3e28] seq_read at ffffffff8ee76d10 #23 [ffff89240e1a3e98] kernfs_fop_read at ffffffff8eedaef5 #24 [ffff89240e1a3ed8] vfs_read at ffffffff8ee4e3ff #25 [ffff89240e1a3f08] sys_read at ffffffff8ee4f27f #26 [ffff89240e1a3f50] system_call_fastpath at ffffffff8f395f92 crash> net_device.state ffff89443b0c0000 state = 0x5 (__LINK_STATE_START| __LINK_STATE_NOCARRIER) To prevent this scenario, we also make sure that the netdevice is present. Signed-off-by: suresh kumar <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
wongsyrone
pushed a commit
to wongsyrone/truenas-scale-linux
that referenced
this pull request
Aug 14, 2022
Release refcount after xas_set to fix UAF which may cause panic like this: page:ffffea000491fa40 refcount:1 mapcount:0 mapping:0000000000000000 index:0x1 pfn:0x1247e9 head:ffffea000491fa00 order:3 compound_mapcount:0 compound_pincount:0 memcg:ffff888104f91091 flags: 0x2fffff80010200(slab|head|node=0|zone=2|lastcpupid=0x1fffff) ... page dumped because: VM_BUG_ON_PAGE(PageTail(page)) ------------[ cut here ]------------ kernel BUG at include/linux/page-flags.h:632! invalid opcode: 0000 [truenas#1] SMP DEBUG_PAGEALLOC KASAN CPU: 1 PID: 7642 Comm: sh Not tainted 5.15.51-dirty truenas#26 ... Call Trace: <TASK> __invalidate_mapping_pages+0xe7/0x540 drop_pagecache_sb+0x159/0x320 iterate_supers+0x120/0x240 drop_caches_sysctl_handler+0xaa/0xe0 proc_sys_call_handler+0x2b4/0x480 new_sync_write+0x3d6/0x5c0 vfs_write+0x446/0x7a0 ksys_write+0x105/0x210 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f52b5733130 ... This problem has been fixed on mainline by patch 6b24ca4 ("mm: Use multi-index entries in the page cache") since it deletes the related code. Fixes: 5c211ba ("mm: add and use find_lock_entries") Signed-off-by: Liu Shixin <[email protected]> Acked-by: Matthew Wilcox (Oracle) <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
wongsyrone
pushed a commit
to wongsyrone/truenas-scale-linux
that referenced
this pull request
Feb 9, 2023
commit b8caf69 upstream. Driver's probe allocates memory for RX FIFO (port->rx_fifo) based on default RX FIFO depth, e.g. 16. Later during serial startup the qcom_geni_serial_port_setup() updates the RX FIFO depth (port->rx_fifo_depth) to match real device capabilities, e.g. to 32. The RX UART handle code will read "port->rx_fifo_depth" number of words into "port->rx_fifo" buffer, thus exceeding the bounds. This can be observed in certain configurations with Qualcomm Bluetooth HCI UART device and KASAN: Bluetooth: hci0: QCA Product ID :0x00000010 Bluetooth: hci0: QCA SOC Version :0x400a0200 Bluetooth: hci0: QCA ROM Version :0x00000200 Bluetooth: hci0: QCA Patch Version:0x00000d2b Bluetooth: hci0: QCA controller version 0x02000200 Bluetooth: hci0: QCA Downloading qca/htbtfw20.tlv bluetooth hci0: Direct firmware load for qca/htbtfw20.tlv failed with error -2 Bluetooth: hci0: QCA Failed to request file: qca/htbtfw20.tlv (-2) Bluetooth: hci0: QCA Failed to download patch (-2) ================================================================== BUG: KASAN: slab-out-of-bounds in handle_rx_uart+0xa8/0x18c Write of size 4 at addr ffff279347d578c0 by task swapper/0/0 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.1.0-rt5-00350-gb2450b7e00be-dirty truenas#26 Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT) Call trace: dump_backtrace.part.0+0xe0/0xf0 show_stack+0x18/0x40 dump_stack_lvl+0x8c/0xb8 print_report+0x188/0x488 kasan_report+0xb4/0x100 __asan_store4+0x80/0xa4 handle_rx_uart+0xa8/0x18c qcom_geni_serial_handle_rx+0x84/0x9c qcom_geni_serial_isr+0x24c/0x760 __handle_irq_event_percpu+0x108/0x500 handle_irq_event+0x6c/0x110 handle_fasteoi_irq+0x138/0x2cc generic_handle_domain_irq+0x48/0x64 If the RX FIFO depth changes after probe, be sure to resize the buffer. Fixes: f9d690b ("tty: serial: qcom_geni_serial: Allocate port->rx_fifo buffer in probe") Cc: <[email protected]> Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Jiri Slaby <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
umsaleem
pushed a commit
that referenced
this pull request
Jul 25, 2023
[ Upstream commit 8d21155 ] adjust_inuse_and_calc_cost() use spin_lock_irq() and IRQ will be enabled when unlock. DEADLOCK might happen if we have held other locks and disabled IRQ before invoking it. Fix it by using spin_lock_irqsave() instead, which can keep IRQ state consistent with before when unlock. ================================ WARNING: inconsistent lock state 5.10.0-02758-g8e5f91fd772f #26 Not tainted -------------------------------- inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. kworker/2:3/388 [HC0[0]:SC0[0]:HE0:SE1] takes: ffff888118c00c28 (&bfqd->lock){?.-.}-{2:2}, at: spin_lock_irq ffff888118c00c28 (&bfqd->lock){?.-.}-{2:2}, at: bfq_bio_merge+0x141/0x390 {IN-HARDIRQ-W} state was registered at: __lock_acquire+0x3d7/0x1070 lock_acquire+0x197/0x4a0 __raw_spin_lock_irqsave _raw_spin_lock_irqsave+0x3b/0x60 bfq_idle_slice_timer_body bfq_idle_slice_timer+0x53/0x1d0 __run_hrtimer+0x477/0xa70 __hrtimer_run_queues+0x1c6/0x2d0 hrtimer_interrupt+0x302/0x9e0 local_apic_timer_interrupt __sysvec_apic_timer_interrupt+0xfd/0x420 run_sysvec_on_irqstack_cond sysvec_apic_timer_interrupt+0x46/0xa0 asm_sysvec_apic_timer_interrupt+0x12/0x20 irq event stamp: 837522 hardirqs last enabled at (837521): [<ffffffff84b9419d>] __raw_spin_unlock_irqrestore hardirqs last enabled at (837521): [<ffffffff84b9419d>] _raw_spin_unlock_irqrestore+0x3d/0x40 hardirqs last disabled at (837522): [<ffffffff84b93fa3>] __raw_spin_lock_irq hardirqs last disabled at (837522): [<ffffffff84b93fa3>] _raw_spin_lock_irq+0x43/0x50 softirqs last enabled at (835852): [<ffffffff84e00558>] __do_softirq+0x558/0x8ec softirqs last disabled at (835845): [<ffffffff84c010ff>] asm_call_irq_on_stack+0xf/0x20 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&bfqd->lock); <Interrupt> lock(&bfqd->lock); *** DEADLOCK *** 3 locks held by kworker/2:3/388: #0: ffff888107af0f38 ((wq_completion)kthrotld){+.+.}-{0:0}, at: process_one_work+0x742/0x13f0 #1: ffff8881176bfdd8 ((work_completion)(&td->dispatch_work)){+.+.}-{0:0}, at: process_one_work+0x777/0x13f0 #2: ffff888118c00c28 (&bfqd->lock){?.-.}-{2:2}, at: spin_lock_irq #2: ffff888118c00c28 (&bfqd->lock){?.-.}-{2:2}, at: bfq_bio_merge+0x141/0x390 stack backtrace: CPU: 2 PID: 388 Comm: kworker/2:3 Not tainted 5.10.0-02758-g8e5f91fd772f #26 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 Workqueue: kthrotld blk_throtl_dispatch_work_fn Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x107/0x167 print_usage_bug valid_state mark_lock_irq.cold+0x32/0x3a mark_lock+0x693/0xbc0 mark_held_locks+0x9e/0xe0 __trace_hardirqs_on_caller lockdep_hardirqs_on_prepare.part.0+0x151/0x360 trace_hardirqs_on+0x5b/0x180 __raw_spin_unlock_irq _raw_spin_unlock_irq+0x24/0x40 spin_unlock_irq adjust_inuse_and_calc_cost+0x4fb/0x970 ioc_rqos_merge+0x277/0x740 __rq_qos_merge+0x62/0xb0 rq_qos_merge bio_attempt_back_merge+0x12c/0x4a0 blk_mq_sched_try_merge+0x1b6/0x4d0 bfq_bio_merge+0x24a/0x390 __blk_mq_sched_bio_merge+0xa6/0x460 blk_mq_sched_bio_merge blk_mq_submit_bio+0x2e7/0x1ee0 __submit_bio_noacct_mq+0x175/0x3b0 submit_bio_noacct+0x1fb/0x270 blk_throtl_dispatch_work_fn+0x1ef/0x2b0 process_one_work+0x83e/0x13f0 process_scheduled_works worker_thread+0x7e3/0xd80 kthread+0x353/0x470 ret_from_fork+0x1f/0x30 Fixes: b0853ab ("blk-iocost: revamp in-period donation snapbacks") Signed-off-by: Li Nan <[email protected]> Acked-by: Tejun Heo <[email protected]> Reviewed-by: Yu Kuai <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
umsaleem
pushed a commit
that referenced
this pull request
Jul 31, 2023
[ Upstream commit 8d21155 ] adjust_inuse_and_calc_cost() use spin_lock_irq() and IRQ will be enabled when unlock. DEADLOCK might happen if we have held other locks and disabled IRQ before invoking it. Fix it by using spin_lock_irqsave() instead, which can keep IRQ state consistent with before when unlock. ================================ WARNING: inconsistent lock state 5.10.0-02758-g8e5f91fd772f #26 Not tainted -------------------------------- inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. kworker/2:3/388 [HC0[0]:SC0[0]:HE0:SE1] takes: ffff888118c00c28 (&bfqd->lock){?.-.}-{2:2}, at: spin_lock_irq ffff888118c00c28 (&bfqd->lock){?.-.}-{2:2}, at: bfq_bio_merge+0x141/0x390 {IN-HARDIRQ-W} state was registered at: __lock_acquire+0x3d7/0x1070 lock_acquire+0x197/0x4a0 __raw_spin_lock_irqsave _raw_spin_lock_irqsave+0x3b/0x60 bfq_idle_slice_timer_body bfq_idle_slice_timer+0x53/0x1d0 __run_hrtimer+0x477/0xa70 __hrtimer_run_queues+0x1c6/0x2d0 hrtimer_interrupt+0x302/0x9e0 local_apic_timer_interrupt __sysvec_apic_timer_interrupt+0xfd/0x420 run_sysvec_on_irqstack_cond sysvec_apic_timer_interrupt+0x46/0xa0 asm_sysvec_apic_timer_interrupt+0x12/0x20 irq event stamp: 837522 hardirqs last enabled at (837521): [<ffffffff84b9419d>] __raw_spin_unlock_irqrestore hardirqs last enabled at (837521): [<ffffffff84b9419d>] _raw_spin_unlock_irqrestore+0x3d/0x40 hardirqs last disabled at (837522): [<ffffffff84b93fa3>] __raw_spin_lock_irq hardirqs last disabled at (837522): [<ffffffff84b93fa3>] _raw_spin_lock_irq+0x43/0x50 softirqs last enabled at (835852): [<ffffffff84e00558>] __do_softirq+0x558/0x8ec softirqs last disabled at (835845): [<ffffffff84c010ff>] asm_call_irq_on_stack+0xf/0x20 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&bfqd->lock); <Interrupt> lock(&bfqd->lock); *** DEADLOCK *** 3 locks held by kworker/2:3/388: #0: ffff888107af0f38 ((wq_completion)kthrotld){+.+.}-{0:0}, at: process_one_work+0x742/0x13f0 #1: ffff8881176bfdd8 ((work_completion)(&td->dispatch_work)){+.+.}-{0:0}, at: process_one_work+0x777/0x13f0 #2: ffff888118c00c28 (&bfqd->lock){?.-.}-{2:2}, at: spin_lock_irq #2: ffff888118c00c28 (&bfqd->lock){?.-.}-{2:2}, at: bfq_bio_merge+0x141/0x390 stack backtrace: CPU: 2 PID: 388 Comm: kworker/2:3 Not tainted 5.10.0-02758-g8e5f91fd772f #26 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 Workqueue: kthrotld blk_throtl_dispatch_work_fn Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x107/0x167 print_usage_bug valid_state mark_lock_irq.cold+0x32/0x3a mark_lock+0x693/0xbc0 mark_held_locks+0x9e/0xe0 __trace_hardirqs_on_caller lockdep_hardirqs_on_prepare.part.0+0x151/0x360 trace_hardirqs_on+0x5b/0x180 __raw_spin_unlock_irq _raw_spin_unlock_irq+0x24/0x40 spin_unlock_irq adjust_inuse_and_calc_cost+0x4fb/0x970 ioc_rqos_merge+0x277/0x740 __rq_qos_merge+0x62/0xb0 rq_qos_merge bio_attempt_back_merge+0x12c/0x4a0 blk_mq_sched_try_merge+0x1b6/0x4d0 bfq_bio_merge+0x24a/0x390 __blk_mq_sched_bio_merge+0xa6/0x460 blk_mq_sched_bio_merge blk_mq_submit_bio+0x2e7/0x1ee0 __submit_bio_noacct_mq+0x175/0x3b0 submit_bio_noacct+0x1fb/0x270 blk_throtl_dispatch_work_fn+0x1ef/0x2b0 process_one_work+0x83e/0x13f0 process_scheduled_works worker_thread+0x7e3/0xd80 kthread+0x353/0x470 ret_from_fork+0x1f/0x30 Fixes: b0853ab ("blk-iocost: revamp in-period donation snapbacks") Signed-off-by: Li Nan <[email protected]> Acked-by: Tejun Heo <[email protected]> Reviewed-by: Yu Kuai <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
umsaleem
pushed a commit
that referenced
this pull request
Sep 14, 2023
commit 2ea3528 upstream. Commit bf5c25d ("skbuff: in skb_segment, call zerocopy functions once per nskb") added the call to zero copy functions in skb_segment(). The change introduced a bug in skb_segment() because skb_orphan_frags() may possibly change the number of fragments or allocate new fragments altogether leaving nrfrags and frag to point to the old values. This can cause a panic with stacktrace like the one below. [ 193.894380] BUG: kernel NULL pointer dereference, address: 00000000000000bc [ 193.895273] CPU: 13 PID: 18164 Comm: vh-net-17428 Kdump: loaded Tainted: G O 5.15.123+ #26 [ 193.903919] RIP: 0010:skb_segment+0xb0e/0x12f0 [ 194.021892] Call Trace: [ 194.027422] <TASK> [ 194.072861] tcp_gso_segment+0x107/0x540 [ 194.082031] inet_gso_segment+0x15c/0x3d0 [ 194.090783] skb_mac_gso_segment+0x9f/0x110 [ 194.095016] __skb_gso_segment+0xc1/0x190 [ 194.103131] netem_enqueue+0x290/0xb10 [sch_netem] [ 194.107071] dev_qdisc_enqueue+0x16/0x70 [ 194.110884] __dev_queue_xmit+0x63b/0xb30 [ 194.121670] bond_start_xmit+0x159/0x380 [bonding] [ 194.128506] dev_hard_start_xmit+0xc3/0x1e0 [ 194.131787] __dev_queue_xmit+0x8a0/0xb30 [ 194.138225] macvlan_start_xmit+0x4f/0x100 [macvlan] [ 194.141477] dev_hard_start_xmit+0xc3/0x1e0 [ 194.144622] sch_direct_xmit+0xe3/0x280 [ 194.147748] __dev_queue_xmit+0x54a/0xb30 [ 194.154131] tap_get_user+0x2a8/0x9c0 [tap] [ 194.157358] tap_sendmsg+0x52/0x8e0 [tap] [ 194.167049] handle_tx_zerocopy+0x14e/0x4c0 [vhost_net] [ 194.173631] handle_tx+0xcd/0xe0 [vhost_net] [ 194.176959] vhost_worker+0x76/0xb0 [vhost] [ 194.183667] kthread+0x118/0x140 [ 194.190358] ret_from_fork+0x1f/0x30 [ 194.193670] </TASK> In this case calling skb_orphan_frags() updated nr_frags leaving nrfrags local variable in skb_segment() stale. This resulted in the code hitting i >= nrfrags prematurely and trying to move to next frag_skb using list_skb pointer, which was NULL, and caused kernel panic. Move the call to zero copy functions before using frags and nr_frags. Fixes: bf5c25d ("skbuff: in skb_segment, call zerocopy functions once per nskb") Signed-off-by: Mohamed Khalfella <[email protected]> Reported-by: Amit Goyal <[email protected]> Cc: [email protected] Reviewed-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
wongsyrone
pushed a commit
to wongsyrone/truenas-scale-linux
that referenced
this pull request
Sep 27, 2023
commit 0b0747d upstream. The following processes run into a deadlock. CPU 41 was waiting for CPU 29 to handle a CSD request while holding spinlock "crashdump_lock", but CPU 29 was hung by that spinlock with IRQs disabled. PID: 17360 TASK: ffff95c1090c5c40 CPU: 41 COMMAND: "mrdiagd" !# 0 [ffffb80edbf37b58] __read_once_size at ffffffff9b871a40 include/linux/compiler.h:185:0 !# 1 [ffffb80edbf37b58] atomic_read at ffffffff9b871a40 arch/x86/include/asm/atomic.h:27:0 !# 2 [ffffb80edbf37b58] dump_stack at ffffffff9b871a40 lib/dump_stack.c:54:0 # 3 [ffffb80edbf37b78] csd_lock_wait_toolong at ffffffff9b131ad5 kernel/smp.c:364:0 # 4 [ffffb80edbf37b78] __csd_lock_wait at ffffffff9b131ad5 kernel/smp.c:384:0 # 5 [ffffb80edbf37bf8] csd_lock_wait at ffffffff9b13267a kernel/smp.c:394:0 # 6 [ffffb80edbf37bf8] smp_call_function_many at ffffffff9b13267a kernel/smp.c:843:0 # 7 [ffffb80edbf37c50] smp_call_function at ffffffff9b13279d kernel/smp.c:867:0 # 8 [ffffb80edbf37c50] on_each_cpu at ffffffff9b13279d kernel/smp.c:976:0 # 9 [ffffb80edbf37c78] flush_tlb_kernel_range at ffffffff9b085c4b arch/x86/mm/tlb.c:742:0 truenas#10 [ffffb80edbf37cb8] __purge_vmap_area_lazy at ffffffff9b23a1e0 mm/vmalloc.c:701:0 truenas#11 [ffffb80edbf37ce0] try_purge_vmap_area_lazy at ffffffff9b23a2cc mm/vmalloc.c:722:0 truenas#12 [ffffb80edbf37ce0] free_vmap_area_noflush at ffffffff9b23a2cc mm/vmalloc.c:754:0 truenas#13 [ffffb80edbf37cf8] free_unmap_vmap_area at ffffffff9b23bb3b mm/vmalloc.c:764:0 truenas#14 [ffffb80edbf37cf8] remove_vm_area at ffffffff9b23bb3b mm/vmalloc.c:1509:0 truenas#15 [ffffb80edbf37d18] __vunmap at ffffffff9b23bb8a mm/vmalloc.c:1537:0 truenas#16 [ffffb80edbf37d40] vfree at ffffffff9b23bc85 mm/vmalloc.c:1612:0 truenas#17 [ffffb80edbf37d58] megasas_free_host_crash_buffer [megaraid_sas] at ffffffffc020b7f2 drivers/scsi/megaraid/megaraid_sas_fusion.c:3932:0 truenas#18 [ffffb80edbf37d80] fw_crash_state_store [megaraid_sas] at ffffffffc01f804d drivers/scsi/megaraid/megaraid_sas_base.c:3291:0 truenas#19 [ffffb80edbf37dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 truenas#20 [ffffb80edbf37dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 truenas#21 [ffffb80edbf37de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 truenas#22 [ffffb80edbf37e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 truenas#23 [ffffb80edbf37ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 truenas#24 [ffffb80edbf37ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 truenas#25 [ffffb80edbf37ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 truenas#26 [ffffb80edbf37f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 truenas#27 [ffffb80edbf37f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 PID: 17355 TASK: ffff95c1090c3d80 CPU: 29 COMMAND: "mrdiagd" !# 0 [ffffb80f2d3c7d30] __read_once_size at ffffffff9b0f2ab0 include/linux/compiler.h:185:0 !# 1 [ffffb80f2d3c7d30] native_queued_spin_lock_slowpath at ffffffff9b0f2ab0 kernel/locking/qspinlock.c:368:0 # 2 [ffffb80f2d3c7d58] pv_queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/paravirt.h:674:0 # 3 [ffffb80f2d3c7d58] queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/qspinlock.h:53:0 # 4 [ffffb80f2d3c7d68] queued_spin_lock at ffffffff9b8961a6 include/asm-generic/qspinlock.h:90:0 # 5 [ffffb80f2d3c7d68] do_raw_spin_lock_flags at ffffffff9b8961a6 include/linux/spinlock.h:173:0 # 6 [ffffb80f2d3c7d68] __raw_spin_lock_irqsave at ffffffff9b8961a6 include/linux/spinlock_api_smp.h:122:0 # 7 [ffffb80f2d3c7d68] _raw_spin_lock_irqsave at ffffffff9b8961a6 kernel/locking/spinlock.c:160:0 # 8 [ffffb80f2d3c7d88] fw_crash_buffer_store [megaraid_sas] at ffffffffc01f8129 drivers/scsi/megaraid/megaraid_sas_base.c:3205:0 # 9 [ffffb80f2d3c7dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 truenas#10 [ffffb80f2d3c7dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 truenas#11 [ffffb80f2d3c7de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 truenas#12 [ffffb80f2d3c7e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 truenas#13 [ffffb80f2d3c7ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 truenas#14 [ffffb80f2d3c7ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 truenas#15 [ffffb80f2d3c7ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 truenas#16 [ffffb80f2d3c7f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 truenas#17 [ffffb80f2d3c7f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 The lock is used to synchronize different sysfs operations, it doesn't protect any resource that will be touched by an interrupt. Consequently it's not required to disable IRQs. Replace the spinlock with a mutex to fix the deadlock. Signed-off-by: Junxiao Bi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Mike Christie <[email protected]> Cc: [email protected] Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
umsaleem
pushed a commit
that referenced
this pull request
Oct 2, 2023
commit 2ea3528 upstream. Commit bf5c25d ("skbuff: in skb_segment, call zerocopy functions once per nskb") added the call to zero copy functions in skb_segment(). The change introduced a bug in skb_segment() because skb_orphan_frags() may possibly change the number of fragments or allocate new fragments altogether leaving nrfrags and frag to point to the old values. This can cause a panic with stacktrace like the one below. [ 193.894380] BUG: kernel NULL pointer dereference, address: 00000000000000bc [ 193.895273] CPU: 13 PID: 18164 Comm: vh-net-17428 Kdump: loaded Tainted: G O 5.15.123+ #26 [ 193.903919] RIP: 0010:skb_segment+0xb0e/0x12f0 [ 194.021892] Call Trace: [ 194.027422] <TASK> [ 194.072861] tcp_gso_segment+0x107/0x540 [ 194.082031] inet_gso_segment+0x15c/0x3d0 [ 194.090783] skb_mac_gso_segment+0x9f/0x110 [ 194.095016] __skb_gso_segment+0xc1/0x190 [ 194.103131] netem_enqueue+0x290/0xb10 [sch_netem] [ 194.107071] dev_qdisc_enqueue+0x16/0x70 [ 194.110884] __dev_queue_xmit+0x63b/0xb30 [ 194.121670] bond_start_xmit+0x159/0x380 [bonding] [ 194.128506] dev_hard_start_xmit+0xc3/0x1e0 [ 194.131787] __dev_queue_xmit+0x8a0/0xb30 [ 194.138225] macvlan_start_xmit+0x4f/0x100 [macvlan] [ 194.141477] dev_hard_start_xmit+0xc3/0x1e0 [ 194.144622] sch_direct_xmit+0xe3/0x280 [ 194.147748] __dev_queue_xmit+0x54a/0xb30 [ 194.154131] tap_get_user+0x2a8/0x9c0 [tap] [ 194.157358] tap_sendmsg+0x52/0x8e0 [tap] [ 194.167049] handle_tx_zerocopy+0x14e/0x4c0 [vhost_net] [ 194.173631] handle_tx+0xcd/0xe0 [vhost_net] [ 194.176959] vhost_worker+0x76/0xb0 [vhost] [ 194.183667] kthread+0x118/0x140 [ 194.190358] ret_from_fork+0x1f/0x30 [ 194.193670] </TASK> In this case calling skb_orphan_frags() updated nr_frags leaving nrfrags local variable in skb_segment() stale. This resulted in the code hitting i >= nrfrags prematurely and trying to move to next frag_skb using list_skb pointer, which was NULL, and caused kernel panic. Move the call to zero copy functions before using frags and nr_frags. Fixes: bf5c25d ("skbuff: in skb_segment, call zerocopy functions once per nskb") Signed-off-by: Mohamed Khalfella <[email protected]> Reported-by: Amit Goyal <[email protected]> Cc: [email protected] Reviewed-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
umsaleem
pushed a commit
that referenced
this pull request
Oct 2, 2023
commit 0b0747d upstream. The following processes run into a deadlock. CPU 41 was waiting for CPU 29 to handle a CSD request while holding spinlock "crashdump_lock", but CPU 29 was hung by that spinlock with IRQs disabled. PID: 17360 TASK: ffff95c1090c5c40 CPU: 41 COMMAND: "mrdiagd" !# 0 [ffffb80edbf37b58] __read_once_size at ffffffff9b871a40 include/linux/compiler.h:185:0 !# 1 [ffffb80edbf37b58] atomic_read at ffffffff9b871a40 arch/x86/include/asm/atomic.h:27:0 !# 2 [ffffb80edbf37b58] dump_stack at ffffffff9b871a40 lib/dump_stack.c:54:0 # 3 [ffffb80edbf37b78] csd_lock_wait_toolong at ffffffff9b131ad5 kernel/smp.c:364:0 # 4 [ffffb80edbf37b78] __csd_lock_wait at ffffffff9b131ad5 kernel/smp.c:384:0 # 5 [ffffb80edbf37bf8] csd_lock_wait at ffffffff9b13267a kernel/smp.c:394:0 # 6 [ffffb80edbf37bf8] smp_call_function_many at ffffffff9b13267a kernel/smp.c:843:0 # 7 [ffffb80edbf37c50] smp_call_function at ffffffff9b13279d kernel/smp.c:867:0 # 8 [ffffb80edbf37c50] on_each_cpu at ffffffff9b13279d kernel/smp.c:976:0 # 9 [ffffb80edbf37c78] flush_tlb_kernel_range at ffffffff9b085c4b arch/x86/mm/tlb.c:742:0 #10 [ffffb80edbf37cb8] __purge_vmap_area_lazy at ffffffff9b23a1e0 mm/vmalloc.c:701:0 #11 [ffffb80edbf37ce0] try_purge_vmap_area_lazy at ffffffff9b23a2cc mm/vmalloc.c:722:0 #12 [ffffb80edbf37ce0] free_vmap_area_noflush at ffffffff9b23a2cc mm/vmalloc.c:754:0 #13 [ffffb80edbf37cf8] free_unmap_vmap_area at ffffffff9b23bb3b mm/vmalloc.c:764:0 #14 [ffffb80edbf37cf8] remove_vm_area at ffffffff9b23bb3b mm/vmalloc.c:1509:0 #15 [ffffb80edbf37d18] __vunmap at ffffffff9b23bb8a mm/vmalloc.c:1537:0 #16 [ffffb80edbf37d40] vfree at ffffffff9b23bc85 mm/vmalloc.c:1612:0 #17 [ffffb80edbf37d58] megasas_free_host_crash_buffer [megaraid_sas] at ffffffffc020b7f2 drivers/scsi/megaraid/megaraid_sas_fusion.c:3932:0 #18 [ffffb80edbf37d80] fw_crash_state_store [megaraid_sas] at ffffffffc01f804d drivers/scsi/megaraid/megaraid_sas_base.c:3291:0 #19 [ffffb80edbf37dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 #20 [ffffb80edbf37dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 #21 [ffffb80edbf37de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 #22 [ffffb80edbf37e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 #23 [ffffb80edbf37ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 #24 [ffffb80edbf37ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 #25 [ffffb80edbf37ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 #26 [ffffb80edbf37f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 #27 [ffffb80edbf37f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 PID: 17355 TASK: ffff95c1090c3d80 CPU: 29 COMMAND: "mrdiagd" !# 0 [ffffb80f2d3c7d30] __read_once_size at ffffffff9b0f2ab0 include/linux/compiler.h:185:0 !# 1 [ffffb80f2d3c7d30] native_queued_spin_lock_slowpath at ffffffff9b0f2ab0 kernel/locking/qspinlock.c:368:0 # 2 [ffffb80f2d3c7d58] pv_queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/paravirt.h:674:0 # 3 [ffffb80f2d3c7d58] queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/qspinlock.h:53:0 # 4 [ffffb80f2d3c7d68] queued_spin_lock at ffffffff9b8961a6 include/asm-generic/qspinlock.h:90:0 # 5 [ffffb80f2d3c7d68] do_raw_spin_lock_flags at ffffffff9b8961a6 include/linux/spinlock.h:173:0 # 6 [ffffb80f2d3c7d68] __raw_spin_lock_irqsave at ffffffff9b8961a6 include/linux/spinlock_api_smp.h:122:0 # 7 [ffffb80f2d3c7d68] _raw_spin_lock_irqsave at ffffffff9b8961a6 kernel/locking/spinlock.c:160:0 # 8 [ffffb80f2d3c7d88] fw_crash_buffer_store [megaraid_sas] at ffffffffc01f8129 drivers/scsi/megaraid/megaraid_sas_base.c:3205:0 # 9 [ffffb80f2d3c7dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 #10 [ffffb80f2d3c7dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 #11 [ffffb80f2d3c7de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 #12 [ffffb80f2d3c7e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 #13 [ffffb80f2d3c7ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 #14 [ffffb80f2d3c7ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 #15 [ffffb80f2d3c7ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 #16 [ffffb80f2d3c7f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 #17 [ffffb80f2d3c7f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 The lock is used to synchronize different sysfs operations, it doesn't protect any resource that will be touched by an interrupt. Consequently it's not required to disable IRQs. Replace the spinlock with a mutex to fix the deadlock. Signed-off-by: Junxiao Bi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Mike Christie <[email protected]> Cc: [email protected] Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
wongsyrone
pushed a commit
to wongsyrone/truenas-scale-linux
that referenced
this pull request
Dec 11, 2023
[ Upstream commit a524eab ] As of commit b92143d ("net: dsa: mv88e6xxx: add infrastructure for phylink_pcs") probing of a Marvell 88e6350 switch causes a NULL pointer de-reference like this example: ... mv88e6085 d0072004.mdio-mii:11: switch 0x3710 detected: Marvell 88E6350, revision 2 8<--- cut here --- Unable to handle kernel NULL pointer dereference at virtual address 00000000 when read [00000000] *pgd=00000000 Internal error: Oops: 5 [truenas#1] ARM Modules linked in: CPU: 0 PID: 8 Comm: kworker/u2:0 Not tainted 6.7.0-rc2-dirty truenas#26 Hardware name: Marvell Armada 370/XP (Device Tree) Workqueue: events_unbound deferred_probe_work_func PC is at mv88e6xxx_port_setup+0x1c/0x44 LR is at dsa_port_devlink_setup+0x74/0x154 pc : [<c057ea24>] lr : [<c0819598>] psr: a0000013 sp : c184fce0 ip : c542b8f4 fp : 00000000 r10: 00000001 r9 : c542a540 r8 : c542bc00 r7 : c542b838 r6 : c5244580 r5 : 00000005 r4 : c5244580 r3 : 00000000 r2 : c542b840 r1 : 00000005 r0 : c1a02040 ... The Marvell 6350 switch has no SERDES interface and so has no corresponding pcs_ops defined for it. But during probing a call is made to mv88e6xxx_port_setup() which unconditionally expects pcs_ops to exist - though the presence of the pcs_ops->pcs_init function is optional. Modify code to check for pcs_ops first, before checking for and calling pcs_ops->pcs_init. Modify checking and use of pcs_ops->pcs_teardown which may potentially suffer the same problem. Fixes: b92143d ("net: dsa: mv88e6xxx: add infrastructure for phylink_pcs") Signed-off-by: Greg Ungerer <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
umsaleem
pushed a commit
that referenced
this pull request
Feb 7, 2024
commit 56925f3 upstream. With previous patch, one of subtests in test_btf_id becomes flaky and may fail. The following is a failing example: Error: #26 btf Error: #26/174 btf/BTF ID Error: #26/174 btf/BTF ID btf_raw_create:PASS:check 0 nsec btf_raw_create:PASS:check 0 nsec test_btf_id:PASS:check 0 nsec ... test_btf_id:PASS:check 0 nsec test_btf_id:FAIL:check BTF lingersdo_test_get_info:FAIL:check failed: -1 The test tries to prove a btf_id not available after the map is closed. But btf_id is freed only after workqueue and a rcu grace period, compared to previous case just after a rcu grade period. Depending on system workload, workqueue could take quite some time to execute function bpf_map_free_deferred() which may cause the test failure. Instead of adding arbitrary delays, let us remove the logic to check btf_id availability after map is closed. Signed-off-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Samasth Norway Ananda <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
umsaleem
pushed a commit
that referenced
this pull request
Nov 18, 2024
Syzkaller reported this warning: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 16 at net/ipv4/af_inet.c:156 inet_sock_destruct+0x1c5/0x1e0 Modules linked in: CPU: 0 UID: 0 PID: 16 Comm: ksoftirqd/0 Not tainted 6.12.0-rc5 #26 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:inet_sock_destruct+0x1c5/0x1e0 Code: 24 12 4c 89 e2 5b 48 c7 c7 98 ec bb 82 41 5c e9 d1 18 17 ff 4c 89 e6 5b 48 c7 c7 d0 ec bb 82 41 5c e9 bf 18 17 ff 0f 0b eb 83 <0f> 0b eb 97 0f 0b eb 87 0f 0b e9 68 ff ff ff 66 66 2e 0f 1f 84 00 RSP: 0018:ffffc9000008bd90 EFLAGS: 00010206 RAX: 0000000000000300 RBX: ffff88810b172a90 RCX: 0000000000000007 RDX: 0000000000000002 RSI: 0000000000000300 RDI: ffff88810b172a00 RBP: ffff88810b172a00 R08: ffff888104273c00 R09: 0000000000100007 R10: 0000000000020000 R11: 0000000000000006 R12: ffff88810b172a00 R13: 0000000000000004 R14: 0000000000000000 R15: ffff888237c31f78 FS: 0000000000000000(0000) GS:ffff888237c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffc63fecac8 CR3: 000000000342e000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __warn+0x88/0x130 ? inet_sock_destruct+0x1c5/0x1e0 ? report_bug+0x18e/0x1a0 ? handle_bug+0x53/0x90 ? exc_invalid_op+0x18/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? inet_sock_destruct+0x1c5/0x1e0 __sk_destruct+0x2a/0x200 rcu_do_batch+0x1aa/0x530 ? rcu_do_batch+0x13b/0x530 rcu_core+0x159/0x2f0 handle_softirqs+0xd3/0x2b0 ? __pfx_smpboot_thread_fn+0x10/0x10 run_ksoftirqd+0x25/0x30 smpboot_thread_fn+0xdd/0x1d0 kthread+0xd3/0x100 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x34/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> ---[ end trace 0000000000000000 ]--- Its possible that two threads call tcp_v6_do_rcv()/sk_forward_alloc_add() concurrently when sk->sk_state == TCP_LISTEN with sk->sk_lock unlocked, which triggers a data-race around sk->sk_forward_alloc: tcp_v6_rcv tcp_v6_do_rcv skb_clone_and_charge_r sk_rmem_schedule __sk_mem_schedule sk_forward_alloc_add() skb_set_owner_r sk_mem_charge sk_forward_alloc_add() __kfree_skb skb_release_all skb_release_head_state sock_rfree sk_mem_uncharge sk_forward_alloc_add() sk_mem_reclaim // set local var reclaimable __sk_mem_reclaim sk_forward_alloc_add() In this syzkaller testcase, two threads call tcp_v6_do_rcv() with skb->truesize=768, the sk_forward_alloc changes like this: (cpu 1) | (cpu 2) | sk_forward_alloc ... | ... | 0 __sk_mem_schedule() | | +4096 = 4096 | __sk_mem_schedule() | +4096 = 8192 sk_mem_charge() | | -768 = 7424 | sk_mem_charge() | -768 = 6656 ... | ... | sk_mem_uncharge() | | +768 = 7424 reclaimable=7424 | | | sk_mem_uncharge() | +768 = 8192 | reclaimable=8192 | __sk_mem_reclaim() | | -4096 = 4096 | __sk_mem_reclaim() | -8192 = -4096 != 0 The skb_clone_and_charge_r() should not be called in tcp_v6_do_rcv() when sk->sk_state is TCP_LISTEN, it happens later in tcp_v6_syn_recv_sock(). Fix the same issue in dccp_v6_do_rcv(). Suggested-by: Eric Dumazet <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Fixes: e994b2f ("tcp: do not lock listener to process SYN packets") Signed-off-by: Wang Liang <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
wongsyrone
pushed a commit
to wongsyrone/truenas-scale-linux
that referenced
this pull request
Dec 27, 2024
[ Upstream commit 7a17308 ] This fixes the circular locking dependency warning below, by reworking iso_sock_recvmsg, to ensure that the socket lock is always released before calling a function that locks hdev. [ 561.670344] ====================================================== [ 561.670346] WARNING: possible circular locking dependency detected [ 561.670349] 6.12.0-rc6+ truenas#26 Not tainted [ 561.670351] ------------------------------------------------------ [ 561.670353] iso-tester/3289 is trying to acquire lock: [ 561.670355] ffff88811f600078 (&hdev->lock){+.+.}-{3:3}, at: iso_conn_big_sync+0x73/0x260 [bluetooth] [ 561.670405] but task is already holding lock: [ 561.670407] ffff88815af58258 (sk_lock-AF_BLUETOOTH){+.+.}-{0:0}, at: iso_sock_recvmsg+0xbf/0x500 [bluetooth] [ 561.670450] which lock already depends on the new lock. [ 561.670452] the existing dependency chain (in reverse order) is: [ 561.670453] -> truenas#2 (sk_lock-AF_BLUETOOTH){+.+.}-{0:0}: [ 561.670458] lock_acquire+0x7c/0xc0 [ 561.670463] lock_sock_nested+0x3b/0xf0 [ 561.670467] bt_accept_dequeue+0x1a5/0x4d0 [bluetooth] [ 561.670510] iso_sock_accept+0x271/0x830 [bluetooth] [ 561.670547] do_accept+0x3dd/0x610 [ 561.670550] __sys_accept4+0xd8/0x170 [ 561.670553] __x64_sys_accept+0x74/0xc0 [ 561.670556] x64_sys_call+0x17d6/0x25f0 [ 561.670559] do_syscall_64+0x87/0x150 [ 561.670563] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 561.670567] -> truenas#1 (sk_lock-AF_BLUETOOTH-BTPROTO_ISO){+.+.}-{0:0}: [ 561.670571] lock_acquire+0x7c/0xc0 [ 561.670574] lock_sock_nested+0x3b/0xf0 [ 561.670577] iso_sock_listen+0x2de/0xf30 [bluetooth] [ 561.670617] __sys_listen_socket+0xef/0x130 [ 561.670620] __x64_sys_listen+0xe1/0x190 [ 561.670623] x64_sys_call+0x2517/0x25f0 [ 561.670626] do_syscall_64+0x87/0x150 [ 561.670629] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 561.670632] -> #0 (&hdev->lock){+.+.}-{3:3}: [ 561.670636] __lock_acquire+0x32ad/0x6ab0 [ 561.670639] lock_acquire.part.0+0x118/0x360 [ 561.670642] lock_acquire+0x7c/0xc0 [ 561.670644] __mutex_lock+0x18d/0x12f0 [ 561.670647] mutex_lock_nested+0x1b/0x30 [ 561.670651] iso_conn_big_sync+0x73/0x260 [bluetooth] [ 561.670687] iso_sock_recvmsg+0x3e9/0x500 [bluetooth] [ 561.670722] sock_recvmsg+0x1d5/0x240 [ 561.670725] sock_read_iter+0x27d/0x470 [ 561.670727] vfs_read+0x9a0/0xd30 [ 561.670731] ksys_read+0x1a8/0x250 [ 561.670733] __x64_sys_read+0x72/0xc0 [ 561.670736] x64_sys_call+0x1b12/0x25f0 [ 561.670738] do_syscall_64+0x87/0x150 [ 561.670741] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 561.670744] other info that might help us debug this: [ 561.670745] Chain exists of: &hdev->lock --> sk_lock-AF_BLUETOOTH-BTPROTO_ISO --> sk_lock-AF_BLUETOOTH [ 561.670751] Possible unsafe locking scenario: [ 561.670753] CPU0 CPU1 [ 561.670754] ---- ---- [ 561.670756] lock(sk_lock-AF_BLUETOOTH); [ 561.670758] lock(sk_lock AF_BLUETOOTH-BTPROTO_ISO); [ 561.670761] lock(sk_lock-AF_BLUETOOTH); [ 561.670764] lock(&hdev->lock); [ 561.670767] *** DEADLOCK *** Fixes: 07a9342 ("Bluetooth: ISO: Send BIG Create Sync via hci_sync") Signed-off-by: Iulia Tanasescu <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
20 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
No description provided.