Hi,
I'm having some trouble getting openFPGALoader to work with my colorlight i5. I'm working inside WSL2 with a custom kernel that has
CONFIG_USB_HIDDEV enabled. The usb device is forwarded with usbipd.
Here is my dmesg output:
[ +4.153175] vhci_hcd vhci_hcd.0: pdev(0) rhport(0) sockfd(3)
[ +0.000004] vhci_hcd vhci_hcd.0: devid(196621) speed(2) speed_str(full-speed)
[ +0.000042] vhci_hcd vhci_hcd.0: Device attached
[ +0.283290] vhci_hcd: vhci_device speed not set
[ +0.069954] usb 1-1: new full-speed USB device number 4 using vhci_hcd
[ +0.080066] vhci_hcd: vhci_device speed not set
[ +0.069994] usb 1-1: SetAddress Request (4) to port 0
[ +0.035266] usb 1-1: New USB device found, idVendor=0d28, idProduct=0204, bcdDevice= 1.00
[ +0.000005] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ +0.000001] usb 1-1: Product: DAPLink CMSIS-DAP
[ +0.000001] usb 1-1: Manufacturer: ARM
[ +0.000001] usb 1-1: SerialNumber: 0700000105daff303334594e43135065a5a5a5a597969908
[ +0.002229] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ +0.002671] hid-generic 0003:0D28:0204.0006: hiddev96: USB HID v1.00 Device [ARM DAPLink CMSIS-DAP] on usb-vhci_hcd.0-1/input2
This looks fine to me, here is the lsusb output:
Bus 001 Device 004: ID 0d28:0204 NXP ARM mbed
Now when I try to detect the FPGA I get the following output:
>:~$ openFPGALoader --detect -c cmsisdap
empty
JTAG init failed with: No device found
I also tried ecpdap, which seems to work just fine, after I installed the udev rules (https://github.com/adamgreig/ecpdap/tree/master/drivers):
>:~$ ecpdap scan
Detected JTAG chain, closest to TDO first:
- 0: 0x41111043 (Lattice Semi.) [IR length: 8] [LFE5U-25]
Any help would be greatly appreciated.
Hi,
I'm having some trouble getting openFPGALoader to work with my colorlight i5. I'm working inside WSL2 with a custom kernel that has
CONFIG_USB_HIDDEV enabled. The usb device is forwarded with usbipd.
Here is my dmesg output:
This looks fine to me, here is the lsusb output:
Bus 001 Device 004: ID 0d28:0204 NXP ARM mbedNow when I try to detect the FPGA I get the following output:
I also tried ecpdap, which seems to work just fine, after I installed the udev rules (https://github.com/adamgreig/ecpdap/tree/master/drivers):
Any help would be greatly appreciated.