Description
Take Ethernet50 and Ethernet51 as examples.
In config_db.json, the relevant configuration is as follows:
"PORT": {
"Ethernet50": {
"alias": "Ethernet51/1",
"lanes": "82",
"admin_status": "up",
"speed": "10000",
"index": "50"
},
"Ethernet51": {
"alias": "Ethernet52/1",
"lanes": "83",
"admin_status": "down",
"speed": "10000",
"index": "51"
}
},
"INTERFACE": {
"Ethernet51|192.168.51.100/24": {}
},
When the device starts up, you can see the following phenomena:
show interface status, you can see that both Ethernet50 and Ethernet51 are up; but using ip link show, you can see that Ethernet50 is down and Ehernet51 is up.
admin@switch100:~$ show interfaces status
Command: intfutil status
Interface Lanes Speed MTU Alias Oper Admin
----------- --------------- ------- ----- ------------ ------ -------
Ethernet0 8 10G 9302 Ethernet1/1 down down
Ethernet1 9 10G 9302 Ethernet2/1 down down
Ethernet2 10 10G 9302 Ethernet3/1 down down
Ethernet3 11 10G 9302 Ethernet4/1 down down
Ethernet4 12 10G 9302 Ethernet5/1 down down
Ethernet5 13 10G 9302 Ethernet6/1 down down
Ethernet6 14 10G 9302 Ethernet7/1 down down
Ethernet7 15 10G 9302 Ethernet8/1 down down
Ethernet8 16 10G 9302 Ethernet9/1 down down
Ethernet9 17 10G 9302 Ethernet10/1 down down
Ethernet10 18 10G 9302 Ethernet11/1 down down
Ethernet11 19 10G 9302 Ethernet12/1 down down
Ethernet12 20 10G 9302 Ethernet13/1 down down
Ethernet13 21 10G 9302 Ethernet14/1 down down
Ethernet14 22 10G 9302 Ethernet15/1 down down
Ethernet15 23 10G 9302 Ethernet16/1 down down
Ethernet16 32 10G 9302 Ethernet17/1 down down
Ethernet17 33 10G 9302 Ethernet18/1 down down
Ethernet18 34 10G 9302 Ethernet19/1 down down
Ethernet19 35 10G 9302 Ethernet20/1 down down
Ethernet20 40 10G 9302 Ethernet21/1 down down
Ethernet21 41 10G 9302 Ethernet22/1 down down
Ethernet22 42 10G 9302 Ethernet23/1 down down
Ethernet23 43 10G 9302 Ethernet24/1 down down
Ethernet24 48 10G 9302 Ethernet25/1 down down
Ethernet25 49 10G 9302 Ethernet26/1 down down
Ethernet26 50 10G 9302 Ethernet27/1 down down
Ethernet27 51 10G 9302 Ethernet28/1 down down
Ethernet28 56 10G 9302 Ethernet29/1 down down
Ethernet29 57 10G 9302 Ethernet30/1 down down
Ethernet30 58 10G 9302 Ethernet31/1 down down
Ethernet31 59 10G 9302 Ethernet32/1 down down
Ethernet32 64 10G 9302 Ethernet33/1 down down
Ethernet33 65 10G 9302 Ethernet34/1 down down
Ethernet34 66 10G 9302 Ethernet35/1 down down
Ethernet35 67 10G 9302 Ethernet36/1 down down
Ethernet36 68 10G 9302 Ethernet37/1 down down
Ethernet37 69 10G 9302 Ethernet38/1 down down
Ethernet38 70 10G 9302 Ethernet39/1 down down
Ethernet39 71 10G 9302 Ethernet40/1 down down
Ethernet40 72 10G 9302 Ethernet41/1 down down
Ethernet41 73 10G 9302 Ethernet42/1 down down
Ethernet42 74 10G 9302 Ethernet43/1 down down
Ethernet43 75 10G 9302 Ethernet44/1 down down
Ethernet44 76 10G 9302 Ethernet45/1 down down
Ethernet45 77 10G 9302 Ethernet46/1 down down
Ethernet46 78 10G 9302 Ethernet47/1 down down
Ethernet47 79 10G 9302 Ethernet48/1 down down
Ethernet48 80 10G 9302 Ethernet49/1 down down
Ethernet49 81 10G 9302 Ethernet50/1 down down
Ethernet50 82 10G 9302 Ethernet51/1 up up
Ethernet51 83 10G 9100 Ethernet52/1 up up
Ethernet52 84,85,86,87 100G 9302 Ethernet53/1 down down
Ethernet53 104,105,106,107 100G 9302 Ethernet54/1 down down
Ethernet54 108,109,110,111 100G 9302 Ethernet55/1 down down
Ethernet55 112,113,114,115 100G 9302 Ethernet56/1 down down
Ethernet56 116,117,118,119 100G 9302 Ethernet57/1 down down
admin@switch100:~$ sudo ip link show Ethernet50
58: Ethernet50: <BROADCAST,MULTICAST> mtu 9302 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether a8:2b:b5:4f:9c:b2 brd ff:ff:ff:ff:ff:ff
admin@switch100:~$ sudo ip link show Ethernet51
59: Ethernet51: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9100 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000
link/ether a8:2b:b5:4f:9c:b2 brd ff:ff:ff:ff:ff:ff
admin@switch100:~$
Steps to reproduce the issue:
1.As described in “Description”.
2.
3.
Describe the results you received:
As described in “Description”.
Describe the results you expected:
The port status seen by “show interface status” and “ip link show“ should be the same as those configured in config_db.json.
Additional information you deem important (e.g. issue happens only occasionally):
**Output of `show version`:**
admin@switch100:~$ show version
SONiC Software Version: SONiC.201803.0-dirty-20180510.051907
Distribution: Debian 8.10
Kernel: 3.16.0-5-amd64
Build commit: 1dd26fe
Build date: Thu May 10 05:35:51 UTC 2018
Built by: simon@debian89
Docker images:
REPOSITORY TAG IMAGE ID SIZE
docker-syncd-nephos 201803.0-dirty-20180510.051907 d740eeeac60d 319.6 MB
docker-syncd-nephos latest d740eeeac60d 319.6 MB
docker-orchagent-nephos 201803.0-dirty-20180510.051907 b1cf7aedb0ea 290.7 MB
docker-orchagent-nephos latest b1cf7aedb0ea 290.7 MB
docker-dhcp-relay 201803.0-dirty-20180510.051907 cf16ce48da3f 285.2 MB
docker-dhcp-relay latest cf16ce48da3f 285.2 MB
docker-database 201803.0-dirty-20180510.051907 d65afb7f3be5 285.2 MB
docker-database latest d65afb7f3be5 285.2 MB
docker-snmp-sv2 201803.0-dirty-20180510.051907 29ea5346df9d 323 MB
docker-snmp-sv2 latest 29ea5346df9d 323 MB
docker-teamd 201803.0-dirty-20180510.051907 a07ea8d2781f 290.5 MB
docker-teamd latest a07ea8d2781f 290.5 MB
docker-router-advertiser 201803.0-dirty-20180510.051907 77904de1774b 282.8 MB
docker-router-advertiser latest 77904de1774b 282.8 MB
docker-platform-monitor 201803.0-dirty-20180510.051907 63445adc75bb 304.8 MB
docker-platform-monitor latest 63445adc75bb 304.8 MB
docker-lldp-sv2 201803.0-dirty-20180510.051907 1c66277f9e10 303.6 MB
docker-lldp-sv2 latest 1c66277f9e10 303.6 MB
docker-fpm-quagga 201803.0-dirty-20180510.051907 a0584bb3cf43 297.1 MB
docker-fpm-quagga latest a0584bb3cf43 297.1 MB
**Attach debug file `sudo generate_dump`:**
sonic_dump_switch100_20180606_020846.tar.gz
Description
Take Ethernet50 and Ethernet51 as examples.
In config_db.json, the relevant configuration is as follows:
When the device starts up, you can see the following phenomena:
show interface status, you can see that both Ethernet50 and Ethernet51 are up; but using ip link show, you can see that Ethernet50 is down and Ehernet51 is up.
Steps to reproduce the issue:
1.As described in “Description”.
2.
3.
Describe the results you received:
As described in “Description”.
Describe the results you expected:
The port status seen by “show interface status” and “ip link show“ should be the same as those configured in config_db.json.
Additional information you deem important (e.g. issue happens only occasionally):
sonic_dump_switch100_20180606_020846.tar.gz