vcgencmd display_power 0 does not turn off screen after updating Raspberry Pi OS #727

System Information
------------------

Raspberry Pi 4 Model B Rev 1.1
PRETTY_NAME="Raspbian GNU/Linux 11 (bullseye)"
NAME="Raspbian GNU/Linux"
VERSION_ID="11"
VERSION="11 (bullseye)"

Raspberry Pi reference 2021-01-11
Generated using pi-gen, https://github.com/RPi-Distro/pi-gen, 21090519d85bdaa1615d5d5057d37b09368ea5d2, stage4

Linux raspberrypi 5.15.56-v7l+ #1575 SMP Fri Jul 22 20:29:46 BST 2022 armv7l GNU/Linux
Revision	: c03111
Serial		: 100000003f786852
Model		: Raspberry Pi 4 Model B Rev 1.1
Throttled flag  : throttled=0x0
Camera          : supported=1 detected=1, libcamera interfaces=0

Videocore information
---------------------

Aug  9 2022 13:45:36
Copyright (c) 2012 Broadcom
version 273b410636cf8854ca35af91fd738a3d5f8b39b6 (clean) (release) (start_x)

alloc failures:     0
compactions:        0
legacy block fails: 0

Filesystem information
----------------------
df: /run/user/1000/doc: Operation not permitted
Filesystem     1K-blocks     Used Available Use% Mounted on
/dev/root      122602552 12311332 105257440  11% /
devtmpfs         1774272        0   1774272   0% /dev
tmpfs            1939136        0   1939136   0% /dev/shm
tmpfs             775656     1140    774516   1% /run
tmpfs               5120        4      5116   1% /run/lock
/dev/mmcblk0p1    258095    51693    206403  21% /boot
tmpfs             387824       28    387796   1% /run/user/1000

Filename				Type		Size		Used		Priority
/var/swap                               file		102396		0	-2

Package version information
---------------------------
raspberrypi-ui-mods:
  Installed: 1.20220530
raspberrypi-sys-mods:
  Installed: 20220224
openbox:
  Installed: 3.6.1-9+rpt1+deb11u1
lxpanel:
  Installed: 0.10.1-2+rpt19
pcmanfm:
  Installed: 1.3.2-1+rpt9
rpd-plym-splash:
  Installed: 0.31

Networking Information
----------------------

docker0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        inet x.x.x.x  netmask x.x.x.x  broadcast x.x.x.x
        ether m.m.m.m  txqueuelen 0  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        ether m.m.m.m  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet x.x.x.x  netmask x.x.x.x
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 1735  bytes 216995 (211.9 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 1735  bytes 216995 (211.9 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet x.x.x.x  netmask x.x.x.x  broadcast x.x.x.x
        inet6 y::y.y.y.y  prefixlen 64  scopeid 0x20<link>
        ether m.m.m.m  txqueuelen 1000  (Ethernet)
        RX packets 96809  bytes 36304378 (34.6 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 81614  bytes 17389321 (16.5 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0


USB Information
---------------

/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/1p, 480M
    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
        |__ Port 1: Dev 3, If 0, Class=Vendor Specific Class, Driver=cp210x, 12M
        |__ Port 2: Dev 4, If 0, Class=Human Interface Device, Driver=usbhid, 12M
        |__ Port 2: Dev 4, If 1, Class=Human Interface Device, Driver=usbhid, 12M

config.txt
----------

arm_freq=1500
audio_pwm_mode=514
camera_auto_detect=-1
config_hdmi_boost=5
core_freq=500
core_freq_min=200
disable_commandline_tags=2
disable_l2cache=1
disable_overscan=1
display_hdmi_rotate=-1
display_lcd_rotate=-1
dvfs=3
enable_gic=1
force_eeprom_read=1
force_pwm_open=1
framebuffer_ignore_alpha=1
framebuffer_swap=1
gpu_freq=500
gpu_freq_min=250
init_uart_clock=0x2dc6c00
lcd_framerate=60
mask_gpu_interrupt0=3072
mask_gpu_interrupt1=25635
max_framebuffers=2
over_voltage_avs=-30000
overscan_bottom=-16
overscan_top=20
pause_burst_frames=1
program_serial_random=1
total_mem=4096
hdmi_force_cec_address:0=65535
hdmi_force_cec_address:1=65535
hdmi_pixel_freq_limit:0=0x11e1a300
hdmi_pixel_freq_limit:1=0x11e1a300
device_tree=-
overlay_prefix=overlays/
hdmi_cvt:0=
hdmi_cvt:1=
hdmi_edid_filename:0=
hdmi_edid_filename:1=
hdmi_timings:0=
hdmi_timings:1=

cmdline.txt
-----------
coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=20,margin_bottom=0 smsc95xx.macaddr=DC:A6:32:40:CF:F9 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=6c672326-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait

raspi-gpio settings
-------------------

BANK0 (GPIO 0 to 27):
GPIO 0: level=1 fsel=0 func=INPUT pull=UP
GPIO 1: level=1 fsel=0 func=INPUT pull=UP
GPIO 2: level=1 fsel=0 func=INPUT pull=UP
GPIO 3: level=1 fsel=0 func=INPUT pull=UP
GPIO 4: level=1 fsel=0 func=INPUT pull=UP
GPIO 5: level=1 fsel=0 func=INPUT pull=UP
GPIO 6: level=1 fsel=0 func=INPUT pull=UP
GPIO 7: level=1 fsel=0 func=INPUT pull=UP
GPIO 8: level=1 fsel=0 func=INPUT pull=UP
GPIO 9: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 10: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 11: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 12: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 13: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 14: level=1 fsel=0 func=INPUT pull=NONE
GPIO 15: level=1 fsel=0 func=INPUT pull=UP
GPIO 16: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 17: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 18: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 19: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 20: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 21: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 22: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 23: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 24: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 25: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 26: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 27: level=0 fsel=0 func=INPUT pull=DOWN
BANK1 (GPIO 28 to 45):
GPIO 28: level=1 fsel=2 alt=5 func=RGMII_MDIO pull=UP
GPIO 29: level=0 fsel=2 alt=5 func=RGMII_MDC pull=DOWN
GPIO 30: level=0 fsel=7 alt=3 func=CTS0 pull=UP
GPIO 31: level=0 fsel=7 alt=3 func=RTS0 pull=NONE
GPIO 32: level=1 fsel=7 alt=3 func=TXD0 pull=NONE
GPIO 33: level=1 fsel=7 alt=3 func=RXD0 pull=UP
GPIO 34: level=0 fsel=7 alt=3 func=SD1_CLK pull=NONE
GPIO 35: level=1 fsel=7 alt=3 func=SD1_CMD pull=UP
GPIO 36: level=1 fsel=7 alt=3 func=SD1_DAT0 pull=UP
GPIO 37: level=0 fsel=7 alt=3 func=SD1_DAT1 pull=UP
GPIO 38: level=1 fsel=7 alt=3 func=SD1_DAT2 pull=UP
GPIO 39: level=1 fsel=7 alt=3 func=SD1_DAT3 pull=UP
GPIO 40: level=1 fsel=4 alt=0 func=PWM1_0 pull=NONE
GPIO 41: level=1 fsel=4 alt=0 func=PWM1_1 pull=NONE
GPIO 42: level=0 fsel=1 func=OUTPUT pull=UP
GPIO 43: level=1 fsel=0 func=INPUT pull=UP
GPIO 44: level=1 fsel=0 func=INPUT pull=UP
GPIO 45: level=1 fsel=0 func=INPUT pull=UP
BANK2 (GPIO 46 to 53):
GPIO 46: level=0 fsel=0 func=INPUT pull=UP
GPIO 47: level=0 fsel=0 func=INPUT pull=UP
GPIO 48: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 49: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 50: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 51: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 52: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 53: level=0 fsel=0 func=INPUT pull=DOWN

vcdbg log messages
------------------

005511.734: arasan: arasan_emmc_open
005986.142: brfs: File read: /mfs/sd/config.txt
005986.975: brfs: File read: 1827 bytes
006008.533: HDMI0:EDID error reading EDID block 0 attempt 0
006009.549: HDMI0:EDID giving up on reading EDID block 0
006070.238: brfs: File read: /mfs/sd/config.txt
006518.439: gpioman: gpioman_get_pin_num: pin DISPLAY_DSI_PORT not defined
006520.907: *** Restart logging
006520.926: brfs: File read: 1827 bytes
006526.486: hdmi: HDMI0:EDID error reading EDID block 0 attempt 0
006527.500: hdmi: HDMI0:EDID giving up on reading EDID block 0
006532.545: hdmi: HDMI0:EDID error reading EDID block 0 attempt 0
006533.562: hdmi: HDMI0:EDID giving up on reading EDID block 0
006533.578: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead
006592.043: HDMI0: hdmi_pixel_encoding: 300000000
006592.057: HDMI1: hdmi_pixel_encoding: 300000000
006596.984: dtb_file 'bcm2711-rpi-4-b.dtb'
006602.797: brfs: File read: /mfs/sd/bcm2711-rpi-4-b.dtb
006602.815: Loaded 'bcm2711-rpi-4-b.dtb' to 0x100 size 0xcaf3
006615.798: brfs: File read: 51955 bytes
006629.360: brfs: File read: /mfs/sd/overlays/overlay_map.dtb
006701.601: brfs: File read: 2043 bytes
006703.694: brfs: File read: /mfs/sd/config.txt
006704.196: dtparam: audio=on
006714.694: brfs: File read: 1827 bytes
006729.871: brfs: File read: /mfs/sd/overlays/vc4-kms-v3d-pi4.dtbo
006827.234: Loaded overlay 'vc4-kms-v3d'
007234.184: brfs: File read: 3914 bytes
007236.378: brfs: File read: /mfs/sd/cmdline.txt
007236.450: Read command line from file 'cmdline.txt':
007236.475: 'console=serial0,115200 console=tty1 root=PARTUUID=6c672326-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait'
007569.558: brfs: File read: 121 bytes
008934.645: brfs: File read: /mfs/sd/kernel7l.img
008934.681: Loaded 'kernel7l.img' to 0x8000 size 0x6b6268
008934.765: Device tree loaded to 0x2eff2e00 (size 0xd200)
008948.268: gpioman: gpioman_get_pin_num: pin SDCARD_CONTROL_POWER not defined
012576.925: vchiq_core: vchiq_init_state: slot_zero = 0xdad80000, is_master = 1
012588.140: TV service:host side not connected, dropping notification 0x00000002, 0x00000001, 0x00000010
018111.053: camsubs: Looking for camera 0: i2c_port = 0, led gpio = -1, power enable gpio = 133
018406.711: camsubs: Camera not found
018406.870: camsubs: Looking for camera 0: i2c_port = 0, led gpio = -1, power enable gpio = 133
018408.495: camsubs: Camera found OK

dmesg log
---------

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 5.15.56-v7l+ (dom@buildbot) (arm-linux-gnueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1575 SMP Fri Jul 22 20:29:46 BST 2022
[    0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[    0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.1
[    0.000000] random: crng init done
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] Reserved memory: created CMA memory pool at 0x000000001ac00000, size 320 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x000000002fffffff]
[    0.000000]   Normal   empty
[    0.000000]   HighMem  [mem 0x0000000030000000-0x00000000fbffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000037ffffff]
[    0.000000]   node   0: [mem 0x0000000040000000-0x00000000fbffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff]
[    0.000000] percpu: Embedded 16 pages/cpu s35788 r8192 d21556 u65536
[    0.000000] pcpu-alloc: s35788 r8192 d21556 u65536 alloc=16*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 997696
[    0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=20,margin_bottom=0 smsc95xx.macaddr=m.m.m.m vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=6c672326-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
[    0.000000] Kernel parameter elevator= does not have any effect anymore.
               Please use sysfs to set IO scheduler for individual devices.
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: mapped [mem 0x0000000014890000-0x0000000018890000] (64MB)
[    0.000000] Memory: 3548544K/3997696K available (10240K kernel code, 1385K rwdata, 3300K rodata, 2048K init, 592K bss, 121472K reserved, 327680K cma-reserved, 3211264K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 35488 entries in 105 pages
[    0.000000] ftrace: allocated 104 pages with 3 groups
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] 	Rude variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7ef00100, parent irq: 25)
[    0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[    0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[    0.000022] Switching to timer-based delay loop, resolution 18ns
[    0.000370] Console: colour dummy device 80x30
[    0.001085] printk: console [tty1] enabled
[    0.001161] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000)
[    0.001213] pid_max: default: 32768 minimum: 301
[    0.001364] LSM: Security Framework initializing
[    0.001588] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.001636] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.003256] cgroup: Disabling memory control group subsystem
[    0.003516] CPU: Testing write buffer coherency: ok
[    0.003589] CPU0: Spectre BHB: enabling loop workaround for all CPUs
[    0.004059] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.005434] Setting up static identity map for 0x200000 - 0x20003c
[    0.005669] rcu: Hierarchical SRCU implementation.
[    0.006698] smp: Bringing up secondary CPUs ...
[    0.007911] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.009236] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.010601] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.010763] smp: Brought up 1 node, 4 CPUs
[    0.010847] SMP: Total of 4 processors activated (432.00 BogoMIPS).
[    0.010879] CPU: All CPU(s) started in HYP mode.
[    0.010905] CPU: Virtualization extensions available.
[    0.011713] devtmpfs: initialized
[    0.026877] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0
[    0.027131] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.027190] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.037546] pinctrl core: initialized pinctrl subsystem
[    0.038902] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.043512] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[    0.044354] audit: initializing netlink subsys (disabled)
[    0.044631] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1
[    0.045304] thermal_sys: Registered thermal governor 'step_wise'
[    0.046033] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.046089] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.046523] Serial: AMBA PL011 UART driver
[    0.060275] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[    0.100080] raspberrypi-firmware soc:firmware: Attached to firmware from 2022-08-09T13:45:36, variant start_x
[    0.110097] raspberrypi-firmware soc:firmware: Firmware hash is 273b410636cf8854ca35af91fd738a3d5f8b39b6
[    0.168623] Kprobes globally optimized
[    0.174887] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
[    0.179500] vgaarb: loaded
[    0.179973] SCSI subsystem initialized
[    0.180288] usbcore: registered new interface driver usbfs
[    0.180367] usbcore: registered new interface driver hub
[    0.180468] usbcore: registered new device driver usb
[    0.180884] usb_phy_generic phy: supply vcc not found, using dummy regulator
[    0.181094] usb_phy_generic phy: dummy supplies not allowed for exclusive requests
[    0.181434] pps_core: LinuxPPS API ver. 1 registered
[    0.181463] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[    0.181512] PTP clock support registered
[    0.183197] clocksource: Switched to clocksource arch_sys_counter
[    0.263833] VFS: Disk quotas dquot_6.6.0
[    0.263985] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.264184] FS-Cache: Loaded
[    0.264396] CacheFiles: Loaded
[    0.265515] simple-framebuffer 3e3ed000.framebuffer: framebuffer at 0x3e3ed000, 0x7da000 bytes
[    0.265559] simple-framebuffer 3e3ed000.framebuffer: format=a8r8g8b8, mode=1920x1060x32, linelength=7680
[    0.276564] Console: switching to colour frame buffer device 240x66
[    0.286522] simple-framebuffer 3e3ed000.framebuffer: fb0: simplefb registered!
[    0.296782] NET: Registered PF_INET protocol family
[    0.297101] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.299021] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    0.299144] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.299248] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    0.299393] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.299536] TCP: Hash tables configured (established 8192 bind 8192)
[    0.299767] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.299875] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.300198] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.301033] RPC: Registered named UNIX socket transport module.
[    0.301116] RPC: Registered udp transport module.
[    0.301180] RPC: Registered tcp transport module.
[    0.301243] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.301327] PCI: CLS 0 bytes, default 64
[    1.283541] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[    1.306889] Initialise system trusted keyrings
[    1.307246] workingset: timestamp_bits=14 max_order=20 bucket_order=6
[    1.316549] zbud: loaded
[    1.318549] FS-Cache: Netfs 'nfs' registered for caching
[    1.319482] NFS: Registering the id_resolver key type
[    1.319588] Key type id_resolver registered
[    1.319649] Key type id_legacy registered
[    1.319846] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.319934] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    1.321145] Key type asymmetric registered
[    1.321209] Asymmetric key parser 'x509' registered
[    1.321497] bounce: pool size: 64 pages
[    1.321618] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    1.321917] io scheduler mq-deadline registered
[    1.324935] io scheduler kyber registered
[    1.337183] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[    1.340174] brcm-pcie fd500000.pcie:   No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
[    1.343220] brcm-pcie fd500000.pcie:      MEM 0x0600000000..0x063fffffff -> 0x00c0000000
[    1.346218] brcm-pcie fd500000.pcie:   IB MEM 0x0000000000..0x00bfffffff -> 0x0400000000
[    1.405314] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
[    1.408602] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[    1.411472] pci_bus 0000:00: root bus resource [bus 00-ff]
[    1.414309] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff])
[    1.417267] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[    1.420391] pci 0000:00:00.0: PME# supported from D0 D3hot
[    1.427019] PCI: bus0: Fast back to back transfers disabled
[    1.430283] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[    1.433307] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    1.436649] pci 0000:01:00.0: PME# supported from D0 D3cold
[    1.443252] PCI: bus1: Fast back to back transfers disabled
[    1.446206] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
[    1.449077] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
[    1.452030] pci 0000:00:00.0: PCI bridge to [bus 01]
[    1.454921] pci 0000:00:00.0:   bridge window [mem 0x600000000-0x6000fffff]
[    1.458205] pcieport 0000:00:00.0: enabling device (0140 -> 0142)
[    1.461332] pcieport 0000:00:00.0: PME: Signaling with IRQ 77
[    1.478164] iproc-rng200 fe104000.rng: hwrng registered
[    1.481366] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[    1.485903] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
[    1.502035] brd: module loaded
[    1.515667] loop: module loaded
[    1.519377] Loading iSCSI transport class v2.0-870.
[    1.527571] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
[    1.623379] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
[    1.627488] usbcore: registered new interface driver r8152
[    1.630358] usbcore: registered new interface driver lan78xx
[    1.633128] usbcore: registered new interface driver smsc95xx
[    1.637493] xhci_hcd 0000:01:00.0: enabling device (0140 -> 0142)
[    1.640360] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    1.643076] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[    1.651428] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x00003c0000000890
[    1.655529] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[    1.658263] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.660974] usb usb1: Product: xHCI Host Controller
[    1.663682] usb usb1: Manufacturer: Linux 5.15.56-v7l+ xhci-hcd
[    1.666327] usb usb1: SerialNumber: 0000:01:00.0
[    1.669775] hub 1-0:1.0: USB hub found
[    1.672575] hub 1-0:1.0: 1 port detected
[    1.675958] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    1.678668] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[    1.681309] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[    1.684458] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
[    1.687147] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.689836] usb usb2: Product: xHCI Host Controller
[    1.692501] usb usb2: Manufacturer: Linux 5.15.56-v7l+ xhci-hcd
[    1.695201] usb usb2: SerialNumber: 0000:01:00.0
[    1.698522] hub 2-0:1.0: USB hub found
[    1.701254] hub 2-0:1.0: 4 ports detected
[    1.706009] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    1.709022] dwc_otg: FIQ enabled
[    1.709037] dwc_otg: NAK holdoff enabled
[    1.709050] dwc_otg: FIQ split-transaction FSM enabled
[    1.709068] Module dwc_common_port init
[    1.709542] usbcore: registered new interface driver uas
[    1.712270] usbcore: registered new interface driver usb-storage
[    1.715088] mousedev: PS/2 mouse device common for all mice
[    1.723008] sdhci: Secure Digital Host Controller Interface driver
[    1.725677] sdhci: Copyright(c) Pierre Ossman
[    1.728990] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.735345] ledtrig-cpu: registered to indicate activity on CPUs
[    1.738311] hid: raw HID events driver (C) Jiri Kosina
[    1.741094] usbcore: registered new interface driver usbhid
[    1.743741] usbhid: USB HID core driver
[    1.752848] Initializing XFRM netlink socket
[    1.755598] NET: Registered PF_PACKET protocol family
[    1.758458] Key type dns_resolver registered
[    1.761479] Registering SWP/SWPB emulation handler
[    1.764838] registered taskstats version 1
[    1.767388] Loading compiled-in X.509 certificates
[    1.770754] Key type ._fscrypt registered
[    1.773333] Key type .fscrypt registered
[    1.775824] Key type fscrypt-provisioning registered
[    1.790593] uart-pl011 fe201000.serial: there is not valid maps for state default
[    1.793539] uart-pl011 fe201000.serial: cts_event_workaround enabled
[    1.796194] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 34, base_baud = 0) is a PL011 rev2
[    1.808019] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[    1.811159] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[    1.815453] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
[    1.818095] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
[    1.850697] of_cfs_init
[    1.853459] of_cfs_init: OK
[    1.893971] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA
[    1.896978] Waiting for root device PARTUUID=6c672326-02...
[    1.939615] mmc1: new high speed SDIO card at address 0001
[    1.963252] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    2.000958] mmc0: new ultra high speed DDR50 SDXC card at address aaaa
[    2.004614] mmcblk0: mmc0:aaaa SR128 119 GiB
[    2.010963]  mmcblk0: p1 p2
[    2.014126] mmcblk0: mmc0:aaaa SR128 119 GiB
[    2.063752] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[    2.066444] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[    2.070054] devtmpfs: mounted
[    2.083916] Freeing unused kernel image (initmem) memory: 2048K
[    2.093541] Run /sbin/init as init process
[    2.096233]   with arguments:
[    2.096246]     /sbin/init
[    2.096260]   with environment:
[    2.096273]     HOME=/
[    2.096286]     TERM=linux
[    2.145905] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
[    2.148676] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.151443] usb 1-1: Product: USB2.0 Hub
[    2.156540] hub 1-1:1.0: USB hub found
[    2.159497] hub 1-1:1.0: 4 ports detected
[    2.483261] usb 1-1.1: new full-speed USB device number 3 using xhci_hcd
[    2.526168] systemd[1]: System time before build time, advancing clock.
[    2.621135] usb 1-1.1: New USB device found, idVendor=10c4, idProduct=ea60, bcdDevice= 1.00
[    2.624013] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.626774] usb 1-1.1: Product: Sonoff Zigbee 3.0 USB Dongle Plus
[    2.629513] usb 1-1.1: Manufacturer: ITead
[    2.632173] usb 1-1.1: SerialNumber: b834cefbc512ec11968621c7bd930c07
[    2.733282] usb 1-1.2: new full-speed USB device number 4 using xhci_hcd
[    2.741307] NET: Registered PF_INET6 protocol family
[    2.745821] Segment Routing with IPv6
[    2.748508] In-situ OAM (IOAM) with IPv6
[    2.838283] systemd[1]: systemd 247.3-7+rpi1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[    2.845173] systemd[1]: Detected architecture arm.
[    2.868069] systemd[1]: Set hostname to <raspberrypi>.
[    2.874918] usb 1-1.2: New USB device found, idVendor=aaec, idProduct=c021, bcdDevice= 2.00
[    2.878109] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.881179] usb 1-1.2: Product: Multi touch overlay device
[    2.884295] usb 1-1.2: Manufacturer: Multi touch
[    2.887381] usb 1-1.2: SerialNumber: 6C65298F0236
[    2.902665] hid-generic 0003:AAEC:C021.0001: hiddev96,hidraw0: USB HID v1.10 Device [Multi touch   Multi touch overlay device] on usb-0000:01:00.0-1.2/input0
[    2.922419] input: Multi touch   Multi touch overlay device Touchscreen as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:AAEC:C021.0002/input/input0
[    2.933555] input: Multi touch   Multi touch overlay device Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:AAEC:C021.0002/input/input1
[    2.938317] hid-generic 0003:AAEC:C021.0002: input,hiddev97,hidraw1: USB HID v1.00 Mouse [Multi touch   Multi touch overlay device] on usb-0000:01:00.0-1.2/input1
[    3.728668] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[    3.948160] systemd[1]: Queued start job for default target Graphical Interface.
[    3.999471] systemd[1]: Created slice system-getty.slice.
[    4.010359] systemd[1]: Created slice system-modprobe.slice.
[    4.020747] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    4.031018] systemd[1]: Created slice User and Session Slice.
[    4.040039] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    4.049789] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    4.059199] systemd[1]: Reached target Slices.
[    4.068018] systemd[1]: Reached target Swap.
[    4.077890] systemd[1]: Listening on Syslog Socket.
[    4.087507] systemd[1]: Listening on fsck to fsckd communication Socket.
[    4.096644] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    4.106547] systemd[1]: Listening on Journal Audit Socket.
[    4.115971] systemd[1]: Listening on Journal Socket (/dev/log).
[    4.125765] systemd[1]: Listening on Journal Socket.
[    4.136406] systemd[1]: Listening on udev Control Socket.
[    4.146165] systemd[1]: Listening on udev Kernel Socket.
[    4.155763] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
[    4.208140] systemd[1]: Mounting POSIX Message Queue File System...
[    4.224316] systemd[1]: Mounting RPC Pipe File System...
[    4.241288] systemd[1]: Mounting Kernel Debug File System...
[    4.258398] systemd[1]: Mounting Kernel Trace File System...
[    4.268525] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
[    4.281350] systemd[1]: Starting Restore / save the current clock...
[    4.299618] systemd[1]: Starting Set the console keyboard layout...
[    4.317518] systemd[1]: Starting Create list of static device nodes for the current kernel...
[    4.334265] systemd[1]: Starting Load Kernel Module configfs...
[    4.350148] systemd[1]: Starting Load Kernel Module drm...
[    4.368618] systemd[1]: Starting Load Kernel Module fuse...
[    4.383650] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[    4.395784] systemd[1]: Starting File System Check on Root Device...
[    4.418375] systemd[1]: Starting Journal Service...
[    4.442155] systemd[1]: Starting Load Kernel Modules...
[    4.458577] systemd[1]: Starting Coldplug All udev Devices...
[    4.459497] fuse: init (API version 7.34)
[    4.491289] systemd[1]: Mounted POSIX Message Queue File System.
[    4.500682] systemd[1]: Mounted RPC Pipe File System.
[    4.510048] systemd[1]: Mounted Kernel Debug File System.
[    4.518867] systemd[1]: Mounted Kernel Trace File System.
[    4.529634] systemd[1]: Finished Restore / save the current clock.
[    4.541101] systemd[1]: Finished Create list of static device nodes for the current kernel.
[    4.551872] systemd[1]: [email protected]: Succeeded.
[    4.557171] systemd[1]: Finished Load Kernel Module configfs.
[    4.567155] systemd[1]: [email protected]: Succeeded.
[    4.572332] systemd[1]: Finished Load Kernel Module fuse.
[    4.589383] systemd[1]: Mounting FUSE Control File System...
[    4.601175] i2c_dev: i2c /dev entries driver
[    4.637149] systemd[1]: Mounting Kernel Configuration File System...
[    4.661184] systemd[1]: Started File System Check Daemon to report status.
[    4.684597] systemd[1]: [email protected]: Succeeded.
[    4.689824] systemd[1]: Finished Load Kernel Module drm.
[    4.700941] systemd[1]: Finished Load Kernel Modules.
[    4.709470] systemd[1]: Mounted FUSE Control File System.
[    4.718140] systemd[1]: Mounted Kernel Configuration File System.
[    4.732754] systemd[1]: Starting Apply Kernel Variables...
[    4.841133] systemd[1]: Finished Apply Kernel Variables.
[    4.865187] systemd[1]: Finished Set the console keyboard layout.
[    4.923135] systemd[1]: Started Journal Service.
[    5.160586] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null). Quota mode: none.
[    5.284469] systemd-journald[144]: Received client request to flush runtime journal.
[    5.326655] systemd-journald[144]: File /var/log/journal/bf28ac8f33b840b1bf5399e88fb3eb57/system.journal corrupted or uncleanly shut down, renaming and replacing.
[    6.801585] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[    6.809799] mc: Linux media interface: v0.10
[    6.872780] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[    6.872816] [vc_sm_connected_init]: start
[    6.926640] [vc_sm_connected_init]: installed successfully
[    6.941847] videodev: Linux video capture interface: v2.00
[    7.153495] brcmstb-i2c fef04500.i2c:  @97500hz registered in polling mode
[    7.156242] brcmstb-i2c fef09500.i2c:  @97500hz registered in polling mode
[    7.213245] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[    7.232656] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[    7.237703] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
[    7.246078] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
[    7.246849] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
[    7.254469] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[    7.261593] rpivid_hevc: module is from the staging directory, the quality is unknown, you have been warned.
[    7.269162] bcm2835_audio bcm2835_audio: card created with 8 channels
[    7.271851] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[    7.273133] rpivid feb10000.codec: Device registered as /dev/video19
[    7.304062] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
[    7.583711] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
[    7.583755] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[    7.583784] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[    7.583829] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[    7.583858] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[    7.587125] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[    7.587186] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[    7.657770] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0
[    7.720051] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[    7.720111] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[    7.721128] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20
[    7.722733] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21
[    7.727590] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22
[    7.731854] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23
[    7.731910] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[    7.731939] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[    7.731962] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[    7.731985] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[    7.732273] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
[    7.748617] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[    7.748673] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[    7.772728] bcm2835-codec bcm2835-codec: Device registered as /dev/video18
[    7.772801] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx
[    7.793860] bcm2835-codec bcm2835-codec: Device registered as /dev/video31
[    7.793931] bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image
[    7.795956] bcm2835-v4l2-0: scene mode selected 0, was 0
[    7.811634] bcm2835-v4l2-0: V4L2 device registered as video0 - stills mode > 1280x720
[    7.817261] bcm2835-v4l2-0: Broadcom 2835 MMAL video capture ver 0.0.2 loaded.
[    7.906565] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    7.957867] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    7.968121] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
[    8.209012] checking generic (3e3ed000 7da000) vs hw (0 ffffffffffffffff)
[    8.209044] fb0: switching to vc4 from simple
[    8.220918] brcmfmac: F1 signature read @0x18000000=0x15264345
[    8.232423] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[    8.234309] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.bin failed with error -2
[    8.279406] usbcore: registered new interface driver brcmfmac
[    8.333926] Console: switching to colour dummy device 80x30
[    8.396087] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4])
[    8.404373] Registered IR keymap rc-cec
[    8.457456] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0
[    8.460027] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input2
[    8.526268] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[    8.526422] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[    8.542066] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Nov  1 2021 00:37:25 version 7.45.241 (1a2f2fa CY) FWID 01-703fd60
[    8.562637] usbcore: registered new interface driver usbserial_generic
[    8.577296] usbserial: USB Serial support registered for generic
[    8.748039] usbcore: registered new interface driver cp210x
[    8.782163] usbserial: USB Serial support registered for cp210x
[    8.792125] cp210x 1-1.1:1.0: cp210x converter detected
[    8.902953] usb 1-1.1: cp210x converter now attached to ttyUSB0
[    9.043807] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4])
[    9.045996] Registered IR keymap rc-cec
[    9.070249] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0
[    9.151454] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input3
[    9.206758] input: Multi touch   Multi touch overlay device as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:AAEC:C021.0002/input/input4
[    9.316809] hid-multitouch 0003:AAEC:C021.0002: input,hiddev97,hidraw1: USB HID v1.00 Mouse [Multi touch   Multi touch overlay device] on usb-0000:01:00.0-1.2/input1
[    9.322585] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4])
[    9.334243] Registered IR keymap rc-cec
[    9.334601] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0
[    9.335314] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input6
[    9.555013] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4])
[    9.563683] Registered IR keymap rc-cec
[    9.579658] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0
[    9.616895] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input7
[    9.620412] vc4-drm gpu: bound fef00700.hdmi (ops vc4_hdmi_ops [vc4])
[    9.638729] Registered IR keymap rc-cec
[    9.638929] rc rc1: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1
[    9.639170] input: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1/input8
[    9.642583] vc4-drm gpu: bound fef05700.hdmi (ops vc4_hdmi_ops [vc4])
[    9.643129] vc4-drm gpu: bound fe004000.txp (ops vc4_txp_ops [vc4])
[    9.643763] vc4-drm gpu: bound fe206000.pixelvalve (ops vc4_crtc_ops [vc4])
[    9.644208] vc4-drm gpu: bound fe207000.pixelvalve (ops vc4_crtc_ops [vc4])
[    9.644619] vc4-drm gpu: bound fe20a000.pixelvalve (ops vc4_crtc_ops [vc4])
[    9.644987] vc4-drm gpu: bound fe216000.pixelvalve (ops vc4_crtc_ops [vc4])
[    9.645376] vc4-drm gpu: bound fec12000.pixelvalve (ops vc4_crtc_ops [vc4])
[    9.676297] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1
[    9.784737] Console: switching to colour frame buffer device 320x90
[    9.820089] vc4-drm gpu: [drm] fb0: vc4drmfb frame buffer device
[   10.346253] 8021q: 802.1Q VLAN Support v1.8
[   10.613165] uart-pl011 fe201000.serial: no DMA platform data
[   10.921819] Adding 102396k swap on /var/swap.  Priority:-2 extents:1 across:102396k SSFS
[   11.349417] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
[   11.913618] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
[   11.914666] bcmgenet fd580000.ethernet eth0: Link is Down
[   16.926557] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   17.433480] Bluetooth: Core ver 2.22
[   17.433566] NET: Registered PF_BLUETOOTH protocol family
[   17.433573] Bluetooth: HCI device and connection manager initialized
[   17.433591] Bluetooth: HCI socket layer initialized
[   17.433602] Bluetooth: L2CAP socket layer initialized
[   17.433622] Bluetooth: SCO socket layer initialized
[   17.450435] Bluetooth: HCI UART driver ver 2.3
[   17.450450] Bluetooth: HCI UART protocol H4 registered
[   17.450507] Bluetooth: HCI UART protocol Three-wire (H5) registered
[   17.450675] Bluetooth: HCI UART protocol Broadcom registered
[   17.768951] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[   17.784105] Bridge firewalling registered
[   18.185735] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   18.185749] Bluetooth: BNEP filters: protocol multicast
[   18.185764] Bluetooth: BNEP socket layer initialized
[   18.210511] NET: Registered PF_ALG protocol family
[   18.261382] cryptd: max_cpu_qlen set to 1000
[   19.617114] hdmi-audio-codec hdmi-audio-codec.3.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19
[   19.617147]  MAI: soc_pcm_open() failed (-19)
[   19.617984] hdmi-audio-codec hdmi-audio-codec.3.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19
[   19.618016]  MAI: soc_pcm_open() failed (-19)
[   19.618713] hdmi-audio-codec hdmi-audio-codec.3.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19
[   19.618742]  MAI: soc_pcm_open() failed (-19)
[   19.630976] hdmi-audio-codec hdmi-audio-codec.3.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19
[   19.631005]  MAI: soc_pcm_open() failed (-19)
[   19.631747] hdmi-audio-codec hdmi-audio-codec.3.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19
[   19.631788]  MAI: soc_pcm_open() failed (-19)
[   19.632213] hdmi-audio-codec hdmi-audio-codec.3.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19
[   19.632239]  MAI: soc_pcm_open() failed (-19)
[   19.890424] hdmi-audio-codec hdmi-audio-codec.3.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19
[   19.890465]  MAI: soc_pcm_open() failed (-19)
[   19.891885] hdmi-audio-codec hdmi-audio-codec.3.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19
[   19.891922]  MAI: soc_pcm_open() failed (-19)
[   19.892831] hdmi-audio-codec hdmi-audio-codec.3.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19
[   19.892860]  MAI: soc_pcm_open() failed (-19)
[   19.904555] hdmi-audio-codec hdmi-audio-codec.3.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19
[   19.904596]  MAI: soc_pcm_open() failed (-19)
[   19.904968] hdmi-audio-codec hdmi-audio-codec.3.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19
[   19.904991]  MAI: soc_pcm_open() failed (-19)
[   19.905363] hdmi-audio-codec hdmi-audio-codec.3.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19
[   19.905395]  MAI: soc_pcm_open() failed (-19)
[   19.936318] Bluetooth: RFCOMM TTY layer initialized
[   19.936347] Bluetooth: RFCOMM socket layer initialized
[   19.936374] Bluetooth: RFCOMM ver 1.11
[   32.473291] cam-dummy-reg: disabling