dial.nvim

Abstract

Extended increment/decrement plugin for Neovim. Written in Lua.

Features

Increment/decrement based on various type of rules
- n-ary (2 <= n <= 36) integers
- decimal Fractions
- date and time
- constants (an ordered set of specific strings, such as a keyword or operator)
  - true ⇄ false
  - && ⇄ ||
  - a ⇄ b ⇄ ... ⇄ z
- hex colors
- semantic version
Support <C-a> / <C-x> / g<C-a> / g<C-x> in VISUAL mode
Flexible configuration of increment/decrement targets
- Rules that are valid only in specific FileType
- Rules that are valid only in VISUAL mode
Support counter
Support dot repeat (without overriding the behavior of .)

Similar plugins

Installation

dial.nvim requires Neovim >=0.11.0. You can install dial.nvim by following the instructions of your favorite package manager.

Usage

This plugin does not provide or override any default key-mappings. To use this plugin, you need to assign the plugin key-mapping to the key you like, as shown below:

nnoremap  <C-a> <Plug>(dial-increment)
nnoremap  <C-x> <Plug>(dial-decrement)
nnoremap g<C-a> <Plug>(dial-g-increment)
nnoremap g<C-x> <Plug>(dial-g-decrement)
xnoremap  <C-a> <Plug>(dial-increment)
xnoremap  <C-x> <Plug>(dial-decrement)
xnoremap g<C-a> <Plug>(dial-g-increment)
xnoremap g<C-x> <Plug>(dial-g-decrement)

Or you can configure it with Lua as follows:

vim.keymap.set("n", "<C-a>", function()
    require("dial.map").manipulate("increment", "normal")
end)
vim.keymap.set("n", "<C-x>", function()
    require("dial.map").manipulate("decrement", "normal")
end)
vim.keymap.set("n", "g<C-a>", function()
    require("dial.map").manipulate("increment", "gnormal")
end)
vim.keymap.set("n", "g<C-x>", function()
    require("dial.map").manipulate("decrement", "gnormal")
end)
vim.keymap.set("x", "<C-a>", function()
    require("dial.map").manipulate("increment", "visual")
end)
vim.keymap.set("x", "<C-x>", function()
    require("dial.map").manipulate("decrement", "visual")
end)
vim.keymap.set("x", "g<C-a>", function()
    require("dial.map").manipulate("increment", "gvisual")
end)
vim.keymap.set("x", "g<C-x>", function()
    require("dial.map").manipulate("decrement", "gvisual")
end)

Configuration

In this plugin, flexible increment/decrement rules can be set by using augend and group, where augend represents the target of the increment/decrement operation, and group represents a group of multiple augends.

local augend = require("dial.augend")
require("dial.config").augends:register_group{
  -- default augends used when no group name is specified
  default = {
    augend.integer.alias.decimal,   -- nonnegative decimal number (0, 1, 2, 3, ...)
    augend.integer.alias.hex,       -- nonnegative hex number  (0x01, 0x1a1f, etc.)
    augend.date.alias["%Y/%m/%d"],  -- date (2022/02/19, etc.)
  },

  -- augends used when group with name `mygroup` is specified
  mygroup = {
    augend.integer.alias.decimal,
    augend.constant.alias.bool,    -- boolean value (true <-> false)
    augend.date.alias["%m/%d/%Y"], -- date (02/19/2022, etc.)
  }
}

To define a group, use the augends:register_group function in the "dial.config" module. The arguments is a dictionary whose keys are the group names and whose values are the list of augends.
Various augends are defined "dial.augend" by default.

To specify the group of augends, you can use expression register (:h @=) as follows:

"=mygroup<CR><C-a>

If it is tedious to specify the expression register for each operation, you can "map" it:

nmap <Leader>a "=mygroup<CR><Plug>(dial-increment)

Alternatively, you can set the same mapping without expression register:

vim.keymap.set("n", "<Leader>a", require("dial.map").inc_normal("mygroup"))

When you don't specify any group name in the way described above, the addends in the default group is used instead.

Example Configuration

local augend = require("dial.augend")
require("dial.config").augends:register_group{
  default = {
    augend.integer.alias.decimal,
    augend.integer.alias.hex,
    augend.date.alias["%Y/%m/%d"],
  },
  only_in_visual = {
    augend.integer.alias.decimal,
    augend.integer.alias.hex,
    augend.date.alias["%Y/%m/%d"],
    augend.constant.alias.alpha,
    augend.constant.alias.Alpha,
  },
}

-- Use `only_in_visual` group only in VISUAL <C-a> / <C-x>
vim.keymap.set("x", "<C-a>", function()
    require("dial.map").manipulate("increment", "visual", "only_in_visual")
end)
vim.keymap.set("x", "<C-x>", function()
    require("dial.map").manipulate("decrement", "visual", "only_in_visual")
end)

require("dial.config").augends:on_filetype {
  typescript = {
    augend.integer.alias.decimal,
    augend.integer.alias.hex,
    augend.constant.new{ elements = {"let", "const"} },
  },
}

List of Augends

For simplicity, we define the variable augend as follows.

local augend = require("dial.augend")

`integer`

n-based integer (2 <= n <= 36). You can use this rule with augend.integer.new{ ...opts }.

require("dial.config").augends:register_group{
  default = {
    -- uppercase hex number (0x1A1A, 0xEEFE, etc.)
    augend.integer.new{
      radix = 16,
      prefix = "0x",
      natural = true,
      case = "upper",
    },
  },
}

`date`

Date and time.

require("dial.config").augends:register_group{
  default = {
    -- date with format `yyyy/mm/dd`
    augend.date.new{
        pattern = "%Y/%m/%d",
        default_kind = "day",
        -- if true, it does not match dates which does not exist, such as 2022/05/32
        only_valid = true,
        -- if true, it only matches dates with word boundary
        word = false,
    },
  },
}

In the pattern argument, you can use the following escape sequences:

Sequence	Meaning
`%Y`	4-digit year. (e.g. `2022`)
`%y`	Last 2 digits of year. The upper 2 digits are interpreted as `20`. (e.g. `22`)
`%m`	2-digit month. (e.g. `09`)
`%d`	2-digit day. (e.g. `28`)
`%H`	2-digit hour, expressed in 24 hours. (e.g. `15`)
`%I`	2-digit hour, expressed in 12 hours. (e.g. `03`)
`%M`	2-digit minute. (e.g. `05`)
`%S`	2-digit second. (e.g. `08`)
`%-y`	1- or 2-digit year. (e.g. `9` represents 2009)
`%-m`	1- or 2-digit month. (e.g. `9`)
`%-d`	1- or 2-digit day. (e.g. `28`)
`%-H`	1- or 2-digit hour, expressed in 24 hours. (e.g. `15`)
`%-I`	1- or 2-digit hour, expressed in 12 hours. (e.g. `3`)
`%-M`	1- or 2-digit minute. (e.g. `5`)
`%-S`	1- or 2-digit second. (e.g. `8`)
`%a`	English weekdays (`Sun`, `Mon`, ..., `Sat`)
`%A`	English full weekdays (`Sunday`, `Monday`, ..., `Saturday`)
`%b`	English month names (`Jan`, ..., `Dec`)
`%B`	English month full names (`January`, ..., `December`)
`%p`	`AM` or `PM`.
`%J`	Japanese weekdays (`日`, `月`, ..., `土`)

`constant`

Predefined sequence of strings. You can use this rule with augend.constant.new{ ...opts }.

require("dial.config").augends:register_group{
  default = {
    -- uppercase hex number (0x1A1A, 0xEEFE, etc.)
    augend.constant.new{
      elements = {"and", "or"},
      word = true, -- if false, "sand" is incremented into "sor", "doctor" into "doctand", etc.
      cyclic = true,  -- "or" is incremented into "and".
    },
    augend.constant.new{
      elements = {"&&", "||"},
      word = false,
      cyclic = true,
    },
  },
}

`hexcolor`

RGB color code such as #000000 and #ffffff.

require("dial.config").augends:register_group{
  default = {
    -- hex colors (e.g. #1A1A1A, #EEFEFE, etc.)
    augend.hexcolor.new{
      case = "upper", -- or "lower", "prefer_upper", "prefer_lower", see below
    },
  },
}

Supported options for case are:

upper: use uppercase letters A-F
lower: use lowercase letters a-f
prefer_upper: try to keep the case, use uppercase as fallback
- #0a1bfe will be incremented to #0b1cff (keep existing case)
- #0A1BFE will be incremented to #0B1CFF (keep existing case)
- #059799 will be incremented to #06989A (no letter, use uppercase)
- #0a1BFf will be incremented to #0B1CFF (mixed casing, use uppercase)
prefer_lower: try to keep the case, use lowercase as fallback
- #0a1bfe will be incremented to #0b1cff (keep existing case)
- #0A1BFE will be incremented to #0B1CFF (keep existing case)
- #059799 will be incremented to #06989a (no letter, use lowercase)
- #0a1BFf will be incremented to #0b1cff (mixed casing, use lowercase)

`semver`

Semantic versions. You can use this rule by augend alias described below.

It differs from a simple nonnegative integer increment/decrement in these ways:

When the cursor is before the semver string, the patch version is incremented.
When the minor version is incremented, the patch version is reset to zero.
When the major version is incremented, the minor and patch versions are reset to zero.

`user`

Custom augends.

require("dial.config").augends:register_group{
  default = {
    -- uppercase hex number (0x1A1A, 0xEEFE, etc.)
    augend.user.new{
      find = require("dial.augend.common").find_pattern("%d+"),
      add = function(text, addend, cursor)
          local n = tonumber(text)
          n = math.floor(n * (2 ^ addend))
          text = tostring(n)
          cursor = #text
          return {text = text, cursor = cursor}
      end
    },
  },
}

Augend Alias

Some augend rules are defined as alias. It can be used directly without using new function.

require("dial.config").augends:register_group{
  default = {
    augend.integer.alias.decimal,
    augend.integer.alias.hex,
    augend.date.alias["%Y/%m/%d"],
  },
}

Alias Name	Explanation	Examples
`augend.integer.alias.decimal`	decimal natural number	`0`, `1`, ..., `9`, `10`, `11`, ...
`augend.integer.alias.decimal_int`	decimal integer (including negative number)	`0`, `314`, `-1592`, ...
`augend.integer.alias.hex`	hex natural number	`0x00`, `0x3f3f`, ...
`augend.integer.alias.octal`	octal natural number	`0o00`, `0o11`, `0o24`, ...
`augend.integer.alias.binary`	binary natural number	`0b0101`, `0b11001111`, ...
`augend.date.alias["%Y/%m/%d"]`	Date in the format `%Y/%m/%d` (`0` padding)	`2021/01/23`, ...
`augend.date.alias["%m/%d/%Y"]`	Date in the format `%m/%d/%Y` (`0` padding)	`23/01/2021`, ...
`augend.date.alias["%d/%m/%Y"]`	Date in the format `%d/%m/%Y` (`0` padding)	`01/23/2021`, ...
`augend.date.alias["%m/%d/%y"]`	Date in the format `%m/%d/%y` (`0` padding)	`01/23/21`, ...
`augend.date.alias["%d/%m/%y"]`	Date in the format `%d/%m/%y` (`0` padding)	`23/01/21`, ...
`augend.date.alias["%m/%d"]`	Date in the format `%m/%d` (`0` padding)	`01/04`, `02/28`, `12/25`, ...
`augend.date.alias["%-m/%-d"]`	Date in the format `%-m/%-d` (no paddings)	`1/4`, `2/28`, `12/25`, ...
`augend.date.alias["%Y-%m-%d"]`	Date in the format `%Y-%m-%d` (`0` padding)	`2021-01-04`, ...
`augend.date.alias["%d.%m.%Y"]`	Date in the format `%d.%m.%Y` (`0` padding)	`23.01.2021`, ...
`augend.date.alias["%d.%m.%y"]`	Date in the format `%d.%m.%y` (`0` padding)	`23.01.21`, ...
`augend.date.alias["%d.%m."]`	Date in the format `%d.%m.` (`0` padding)	`04.01.`, `28.02.`, `25.12.`, ...
`augend.date.alias["%-d.%-m."]`	Date in the format `%-d.%-m.` (no paddings)	`4.1.`, `28.2.`, `25.12.`, ...
`augend.date.alias["%Y年%-m月%-d日"]`	Date in the format `%Y年%-m月%-d日` (no paddings)	`2021年1月4日`, ...
`augend.date.alias["%Y年%-m月%-d日(%ja)"]`	Date in the format `%Y年%-m月%-d日(%ja)`	`2021年1月4日(月)`, ...
`augend.date.alias["%H:%M:%S"]`	Time in the format `%H:%M:%S`	`14:30:00`, ...
`augend.date.alias["%H:%M"]`	Time in the format `%H:%M`	`14:30`, ...
`augend.constant.alias.de_weekday`	German weekday	`Mo`, `Di`, ..., `Sa`, `So`
`augend.constant.alias.de_weekday_full`	German full weekday	`Montag`, `Dienstag`, ..., `Sonntag`
`augend.constant.alias.en_weekday`	English weekday	`Mon`, `Tue`, ..., `Sat`, `Sun`
`augend.constant.alias.en_weekday_full`	English full weekday	`Monday`, `Tuesday`, ..., `Sunday`
`augend.constant.alias.ja_weekday`	Japanese weekday	`月`, `火`, ..., `土`, `日`
`augend.constant.alias.ja_weekday_full`	Japanese full weekday	`月曜日`, `火曜日`, ..., `日曜日`
`augend.constant.alias.bool`	elements in boolean algebra (`true` and `false`)	`true`, `false`
`augend.constant.alias.Bool`	elements in boolean algebra (`True` and `False`)	`True`, `False`
`augend.constant.alias.alpha`	Lowercase alphabet letter (word)	`a`, `b`, `c`, ..., `z`
`augend.constant.alias.Alpha`	Uppercase alphabet letter (word)	`A`, `B`, `C`, ..., `Z`
`augend.semver.alias.semver`	Semantic version	`0.3.0`, `1.22.1`, `3.9.1`, ...

If you don't specify any settings, the following augends is set as the value of the default group.

augend.integer.alias.decimal
augend.integer.alias.hex
augend.date.alias["%Y/%m/%d"]
augend.date.alias["%Y-%m-%d"]
augend.date.alias["%m/%d"]
augend.date.alias["%H:%M"]
augend.constant.alias.ja_weekday_full

Changelog

See HISTORY.

Testing

This plugin uses PlenaryBustedDirectory in plenary.nvim.

Name		Name	Last commit message	Last commit date
Latest commit History 266 Commits
.github/workflows		.github/workflows
autoload/dial		autoload/dial
doc		doc
lua/dial		lua/dial
plugin		plugin
tests		tests
.stylua.toml		.stylua.toml
HISTORY.md		HISTORY.md
LICENSE		LICENSE
README.md		README.md
README_ja.md		README_ja.md
TROUBLESHOOTING.md		TROUBLESHOOTING.md
TROUBLESHOOTING_ja.md		TROUBLESHOOTING_ja.md
run		run

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

Repository files navigation

dial.nvim

Abstract

Features

Similar plugins

Installation

Usage

Configuration

Example Configuration

List of Augends

`integer`

`date`

`constant`

`hexcolor`

`semver`

`user`

Augend Alias

Changelog

Testing

About

Uh oh!

Releases 2

Packages

Contributors 18

Uh oh!

Languages

License

monaqa/dial.nvim

Folders and files

Latest commit

History

Repository files navigation

dial.nvim

Abstract

Features

Similar plugins

Installation

Usage

Configuration

Example Configuration

List of Augends

integer

date

constant

hexcolor

semver

user

Augend Alias

Changelog

Testing

About

Topics

Resources

License

Uh oh!

Stars

Watchers

Forks

Releases 2

Packages 0

Contributors 18

Uh oh!

Languages

`integer`

`date`

`constant`

`hexcolor`

`semver`

`user`

Packages