outbound: Configure endpoint construction in logical stack#949
Merged
Conversation
ebf67d6 moved endpoint construction logic out of the logical stacks. In doing so, the gateway was incorrectly configured to mark endpoints with disabled identity, preventing mTLS between the gateway and destination service. This change moves endpoint construction into each logical stack so that it need not be configured on each instantiation.
hawkw
approved these changes
Mar 18, 2021
Contributor
hawkw
left a comment
hawkw
left a comment
There was a problem hiding this comment.
looks good to me; one thing that looked kind of weird but it's not a blocker.
olix0r
added a commit
to linkerd/linkerd2
that referenced
this pull request
Mar 30, 2021
This release fixes two issues: 1. The inbound proxy could break non-meshed TLS connections when the initial ClientHello message was larger than 512 bytes or when the entire message was not received in the first data packet of the connection. TLS detection has been fixed to ensure that the entire message is preserved in these cases. 2. The admin server could emit warnings about HTTP detection failing in some innocuous situations, such as when the socket closes before a request is sent. These situations are now handled gracefully without logging warnings. --- * Update MAINTAINERS to point at the main repo (linkerd/linkerd2-proxy#950) * outbound: Configure endpoint construction in logical stack (linkerd/linkerd2-proxy#949) * outbound: Decouple the TCP connect stack from the target type (linkerd/linkerd2-proxy#951) * outbound: Make HTTP endpoint stack generic on its target (linkerd/linkerd2-proxy#952) * outbound: Make the HTTP server stack generic (linkerd/linkerd2-proxy#953) * Update profile response to include a logical address (linkerd/linkerd2-proxy#954) * inbound, outbound: `Param`-ify `listen::Addrs` (linkerd/linkerd2-proxy#955) * tls: Fix inbound I/O when TLS detection fails (linkerd/linkerd2-proxy#958) * tls: Test SNI detection (linkerd/linkerd2-proxy#959) * admin: Handle connections that fail protocol detection (linkerd/linkerd2-proxy#960)
olix0r
added a commit
to linkerd/linkerd2
that referenced
this pull request
Mar 30, 2021
This release fixes two issues: 1. The inbound proxy could break non-meshed TLS connections when the initial ClientHello message was larger than 512 bytes or when the entire message was not received in the first data packet of the connection. TLS detection has been fixed to ensure that the entire message is preserved in these cases. 2. The admin server could emit warnings about HTTP detection failing in some innocuous situations, such as when the socket closes before a request is sent. These situations are now handled gracefully without logging warnings. --- * Update MAINTAINERS to point at the main repo (linkerd/linkerd2-proxy#950) * outbound: Configure endpoint construction in logical stack (linkerd/linkerd2-proxy#949) * outbound: Decouple the TCP connect stack from the target type (linkerd/linkerd2-proxy#951) * outbound: Make HTTP endpoint stack generic on its target (linkerd/linkerd2-proxy#952) * outbound: Make the HTTP server stack generic (linkerd/linkerd2-proxy#953) * Update profile response to include a logical address (linkerd/linkerd2-proxy#954) * inbound, outbound: `Param`-ify `listen::Addrs` (linkerd/linkerd2-proxy#955) * tls: Fix inbound I/O when TLS detection fails (linkerd/linkerd2-proxy#958) * tls: Test SNI detection (linkerd/linkerd2-proxy#959) * admin: Handle connections that fail protocol detection (linkerd/linkerd2-proxy#960)
Pothulapati
pushed a commit
to linkerd/linkerd2
that referenced
this pull request
Apr 14, 2021
This release fixes two issues: 1. The inbound proxy could break non-meshed TLS connections when the initial ClientHello message was larger than 512 bytes or when the entire message was not received in the first data packet of the connection. TLS detection has been fixed to ensure that the entire message is preserved in these cases. 2. The admin server could emit warnings about HTTP detection failing in some innocuous situations, such as when the socket closes before a request is sent. These situations are now handled gracefully without logging warnings. --- * Update MAINTAINERS to point at the main repo (linkerd/linkerd2-proxy#950) * outbound: Configure endpoint construction in logical stack (linkerd/linkerd2-proxy#949) * outbound: Decouple the TCP connect stack from the target type (linkerd/linkerd2-proxy#951) * outbound: Make HTTP endpoint stack generic on its target (linkerd/linkerd2-proxy#952) * outbound: Make the HTTP server stack generic (linkerd/linkerd2-proxy#953) * Update profile response to include a logical address (linkerd/linkerd2-proxy#954) * inbound, outbound: `Param`-ify `listen::Addrs` (linkerd/linkerd2-proxy#955) * tls: Fix inbound I/O when TLS detection fails (linkerd/linkerd2-proxy#958) * tls: Test SNI detection (linkerd/linkerd2-proxy#959) * admin: Handle connections that fail protocol detection (linkerd/linkerd2-proxy#960)
jijeesh
pushed a commit
to jijeesh/linkerd2
that referenced
this pull request
Apr 21, 2021
This release fixes two issues: 1. The inbound proxy could break non-meshed TLS connections when the initial ClientHello message was larger than 512 bytes or when the entire message was not received in the first data packet of the connection. TLS detection has been fixed to ensure that the entire message is preserved in these cases. 2. The admin server could emit warnings about HTTP detection failing in some innocuous situations, such as when the socket closes before a request is sent. These situations are now handled gracefully without logging warnings. --- * Update MAINTAINERS to point at the main repo (linkerd/linkerd2-proxy#950) * outbound: Configure endpoint construction in logical stack (linkerd/linkerd2-proxy#949) * outbound: Decouple the TCP connect stack from the target type (linkerd/linkerd2-proxy#951) * outbound: Make HTTP endpoint stack generic on its target (linkerd/linkerd2-proxy#952) * outbound: Make the HTTP server stack generic (linkerd/linkerd2-proxy#953) * Update profile response to include a logical address (linkerd/linkerd2-proxy#954) * inbound, outbound: `Param`-ify `listen::Addrs` (linkerd/linkerd2-proxy#955) * tls: Fix inbound I/O when TLS detection fails (linkerd/linkerd2-proxy#958) * tls: Test SNI detection (linkerd/linkerd2-proxy#959) * admin: Handle connections that fail protocol detection (linkerd/linkerd2-proxy#960) Signed-off-by: Jijeesh <[email protected]>
kleimkuhler
pushed a commit
to linkerd/linkerd2
that referenced
this pull request
May 12, 2021
This release fixes two issues: 1. The inbound proxy could break non-meshed TLS connections when the initial ClientHello message was larger than 512 bytes or when the entire message was not received in the first data packet of the connection. TLS detection has been fixed to ensure that the entire message is preserved in these cases. 2. The admin server could emit warnings about HTTP detection failing in some innocuous situations, such as when the socket closes before a request is sent. These situations are now handled gracefully without logging warnings. --- * Update MAINTAINERS to point at the main repo (linkerd/linkerd2-proxy#950) * outbound: Configure endpoint construction in logical stack (linkerd/linkerd2-proxy#949) * outbound: Decouple the TCP connect stack from the target type (linkerd/linkerd2-proxy#951) * outbound: Make HTTP endpoint stack generic on its target (linkerd/linkerd2-proxy#952) * outbound: Make the HTTP server stack generic (linkerd/linkerd2-proxy#953) * Update profile response to include a logical address (linkerd/linkerd2-proxy#954) * inbound, outbound: `Param`-ify `listen::Addrs` (linkerd/linkerd2-proxy#955) * tls: Fix inbound I/O when TLS detection fails (linkerd/linkerd2-proxy#958) * tls: Test SNI detection (linkerd/linkerd2-proxy#959) * admin: Handle connections that fail protocol detection (linkerd/linkerd2-proxy#960)
kleimkuhler
pushed a commit
to linkerd/linkerd2
that referenced
this pull request
May 12, 2021
This release fixes two issues: 1. The inbound proxy could break non-meshed TLS connections when the initial ClientHello message was larger than 512 bytes or when the entire message was not received in the first data packet of the connection. TLS detection has been fixed to ensure that the entire message is preserved in these cases. 2. The admin server could emit warnings about HTTP detection failing in some innocuous situations, such as when the socket closes before a request is sent. These situations are now handled gracefully without logging warnings. --- * Update MAINTAINERS to point at the main repo (linkerd/linkerd2-proxy#950) * outbound: Configure endpoint construction in logical stack (linkerd/linkerd2-proxy#949) * outbound: Decouple the TCP connect stack from the target type (linkerd/linkerd2-proxy#951) * outbound: Make HTTP endpoint stack generic on its target (linkerd/linkerd2-proxy#952) * outbound: Make the HTTP server stack generic (linkerd/linkerd2-proxy#953) * Update profile response to include a logical address (linkerd/linkerd2-proxy#954) * inbound, outbound: `Param`-ify `listen::Addrs` (linkerd/linkerd2-proxy#955) * tls: Fix inbound I/O when TLS detection fails (linkerd/linkerd2-proxy#958) * tls: Test SNI detection (linkerd/linkerd2-proxy#959) * admin: Handle connections that fail protocol detection (linkerd/linkerd2-proxy#960)
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
2 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
ebf67d6 moved endpoint construction logic out of the logical stacks. This
created more boilerplate than hoped. Realistically, the logical stack needs to
be responsible for its inner target types.
This change moves endpoint construction into each logical stack so that
it need not be configured on each instantiation, simplifying resolver type
constraints.