net: rmnet: fix suspicious RCU usage

TaeheeYoo · davem330 · commit 102210f76644 · 2020-02-27T11:45:07.000-08:00
rmnet_get_port() internally calls rcu_dereference_rtnl(), which checks RTNL. But rmnet_get_port() could be called by packet path. The packet path is not protected by RTNL. So, the suspicious RCU usage problem occurs. Test commands: modprobe rmnet ip netns add nst ip link add veth0 type veth peer name veth1 ip link set veth1 netns nst ip link add rmnet0 link veth0 type rmnet mux_id 1 ip netns exec nst ip link add rmnet1 link veth1 type rmnet mux_id 1 ip netns exec nst ip link set veth1 up ip netns exec nst ip link set rmnet1 up ip netns exec nst ip a a 192.168.100.2/24 dev rmnet1 ip link set veth0 up ip link set rmnet0 up ip a a 192.168.100.1/24 dev rmnet0 ping 192.168.100.2 Splat looks like: [ 146.630958][ T1174] WARNING: suspicious RCU usage [ 146.631735][ T1174] 5.6.0-rc1+ #447 Not tainted [ 146.632387][ T1174] ----------------------------- [ 146.633151][ T1174] drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c:386 suspicious rcu_dereference_check() ! [ 146.634742][ T1174] [ 146.634742][ T1174] other info that might help us debug this: [ 146.634742][ T1174] [ 146.645992][ T1174] [ 146.645992][ T1174] rcu_scheduler_active = 2, debug_locks = 1 [ 146.646937][ T1174] 5 locks held by ping/1174: [ 146.647609][ T1174] #0: ffff8880c31dea70 (sk_lock-AF_INET){+.+.}, at: raw_sendmsg+0xab8/0x2980 [ 146.662463][ T1174] #1: ffffffff93925660 (rcu_read_lock_bh){....}, at: ip_finish_output2+0x243/0x2150 [ 146.671696][ T1174] #2: ffffffff93925660 (rcu_read_lock_bh){....}, at: __dev_queue_xmit+0x213/0x2940 [ 146.673064][ T1174] #3: ffff8880c19ecd58 (&dev->qdisc_running_key#7){+...}, at: ip_finish_output2+0x714/0x2150 [ 146.690358][ T1174] #4: ffff8880c5796898 (&dev->qdisc_xmit_lock_key#3){+.-.}, at: sch_direct_xmit+0x1e2/0x1020 [ 146.699875][ T1174] [ 146.699875][ T1174] stack backtrace: [ 146.701091][ T1174] CPU: 0 PID: 1174 Comm: ping Not tainted 5.6.0-rc1+ #447 [ 146.705215][ T1174] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 146.706565][ T1174] Call Trace: [ 146.707102][ T1174] dump_stack+0x96/0xdb [ 146.708007][ T1174] rmnet_get_port.part.9+0x76/0x80 [rmnet] [ 146.709233][ T1174] rmnet_egress_handler+0x107/0x420 [rmnet] [ 146.710492][ T1174] ? sch_direct_xmit+0x1e2/0x1020 [ 146.716193][ T1174] rmnet_vnd_start_xmit+0x3d/0xa0 [rmnet] [ 146.717012][ T1174] dev_hard_start_xmit+0x160/0x740 [ 146.717854][ T1174] sch_direct_xmit+0x265/0x1020 [ 146.718577][ T1174] ? register_lock_class+0x14d0/0x14d0 [ 146.719429][ T1174] ? dev_watchdog+0xac0/0xac0 [ 146.723738][ T1174] ? __dev_queue_xmit+0x15fd/0x2940 [ 146.724469][ T1174] ? lock_acquire+0x164/0x3b0 [ 146.725172][ T1174] __dev_queue_xmit+0x20c7/0x2940 [ ... ] Fixes: ceed73a ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c b/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c
@@ -382,11 +382,10 @@ struct rtnl_link_ops rmnet_link_ops __read_mostly = {
 	.fill_info	= rmnet_fill_info,
 };
 
-/* Needs either rcu_read_lock() or rtnl lock */
-struct rmnet_port *rmnet_get_port(struct net_device *real_dev)
+struct rmnet_port *rmnet_get_port_rcu(struct net_device *real_dev)
 {
 	if (rmnet_is_real_dev_registered(real_dev))
-		return rcu_dereference_rtnl(real_dev->rx_handler_data);
+		return rcu_dereference_bh(real_dev->rx_handler_data);
 	else
 		return NULL;
 }
@@ -412,7 +411,7 @@ int rmnet_add_bridge(struct net_device *rmnet_dev,
 	struct rmnet_port *port, *slave_port;
 	int err;
 
-	port = rmnet_get_port(real_dev);
+	port = rmnet_get_port_rtnl(real_dev);
 
 	/* If there is more than one rmnet dev attached, its probably being
 	 * used for muxing. Skip the briding in that case
@@ -427,7 +426,7 @@ int rmnet_add_bridge(struct net_device *rmnet_dev,
 	if (err)
 		return -EBUSY;
 
-	slave_port = rmnet_get_port(slave_dev);
+	slave_port = rmnet_get_port_rtnl(slave_dev);
 	slave_port->rmnet_mode = RMNET_EPMODE_BRIDGE;
 	slave_port->bridge_ep = real_dev;
 
@@ -445,11 +444,11 @@ int rmnet_del_bridge(struct net_device *rmnet_dev,
 	struct net_device *real_dev = priv->real_dev;
 	struct rmnet_port *port, *slave_port;
 
-	port = rmnet_get_port(real_dev);
+	port = rmnet_get_port_rtnl(real_dev);
 	port->rmnet_mode = RMNET_EPMODE_VND;
 	port->bridge_ep = NULL;
 
-	slave_port = rmnet_get_port(slave_dev);
+	slave_port = rmnet_get_port_rtnl(slave_dev);
 	rmnet_unregister_real_device(slave_dev, slave_port);
 
 	netdev_dbg(slave_dev, "removed from rmnet as slave\n");
diff --git a/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.h b/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.h
@@ -65,7 +65,7 @@ struct rmnet_priv {
 	struct rmnet_priv_stats stats;
 };
 
-struct rmnet_port *rmnet_get_port(struct net_device *real_dev);
+struct rmnet_port *rmnet_get_port_rcu(struct net_device *real_dev);
 struct rmnet_endpoint *rmnet_get_endpoint(struct rmnet_port *port, u8 mux_id);
 int rmnet_add_bridge(struct net_device *rmnet_dev,
 		     struct net_device *slave_dev,
diff --git a/drivers/net/ethernet/qualcomm/rmnet/rmnet_handlers.c b/drivers/net/ethernet/qualcomm/rmnet/rmnet_handlers.c
@@ -184,7 +184,7 @@ rx_handler_result_t rmnet_rx_handler(struct sk_buff **pskb)
 		return RX_HANDLER_PASS;
 
 	dev = skb->dev;
-	port = rmnet_get_port(dev);
+	port = rmnet_get_port_rcu(dev);
 
 	switch (port->rmnet_mode) {
 	case RMNET_EPMODE_VND:
@@ -217,7 +217,7 @@ void rmnet_egress_handler(struct sk_buff *skb)
 	skb->dev = priv->real_dev;
 	mux_id = priv->mux_id;
 
-	port = rmnet_get_port(skb->dev);
+	port = rmnet_get_port_rcu(skb->dev);
 	if (!port)
 		goto drop;
 
