Treat extend-* configuration options as "always extended"#1245
Merged
charliermarsh merged 1 commit intomainfrom Dec 15, 2022
Merged
Treat extend-* configuration options as "always extended"#1245charliermarsh merged 1 commit intomainfrom
extend-* configuration options as "always extended"#1245charliermarsh merged 1 commit intomainfrom
Conversation
charliermarsh
force-pushed
the
charlie/extends
branch
from
4893997 to
24b2e44
Compare
not-my-profile
added a commit
to not-my-profile/ruff
that referenced
this pull request
Jan 28, 2023
Ruff allows rules to be enabled with `select` and disabled with
`ignore`, where the more specific rule selector takes precedence,
for example:
`--select ALL --ignore E501` selects all rules except E501
`--ignore ALL --select E501` selects only E501
(If both selectors have the same specificity ignore selectors
take precedence.)
Ruff always had two quirks:
* If `pyproject.toml` specified `ignore = ["E501"]` then you could
previously not override that with `--select E501` on the command-line
(since the resolution didn't take into account that the select was
specified after the ignore).
* If `pyproject.toml` specified `select = ["E501"]` then you could
previously not override that with `--ignore E` on the command-line
(since the resolution didn't take into account that the ignore was
specified after the select).
Since d067efe (astral-sh#1245)
`extend-select` and `extend-ignore` always override
`select` and `ignore` and are applied iteratively in pairs,
which introduced another quirk:
* If some `pyproject.toml` file specified `extend-select`
or `extend-ignore`, `select` and `ignore` became pretty much
unreliable after that with no way of resetting that.
This commit fixes all of these quirks by making later configuration
sources take precedence over earlier configuration sources.
While this is a breaking change, it fixes the broken status quo.
not-my-profile
added a commit
to not-my-profile/ruff
that referenced
this pull request
Jan 29, 2023
Ruff allows rules to be enabled with `select` and disabled with
`ignore`, where the more specific rule selector takes precedence,
for example:
`--select ALL --ignore E501` selects all rules except E501
`--ignore ALL --select E501` selects only E501
(If both selectors have the same specificity ignore selectors
take precedence.)
Ruff always had two quirks:
* If `pyproject.toml` specified `ignore = ["E501"]` then you could
previously not override that with `--select E501` on the command-line
(since the resolution didn't take into account that the select was
specified after the ignore).
* If `pyproject.toml` specified `select = ["E501"]` then you could
previously not override that with `--ignore E` on the command-line
(since the resolution didn't take into account that the ignore was
specified after the select).
Since d067efe (astral-sh#1245)
`extend-select` and `extend-ignore` always override
`select` and `ignore` and are applied iteratively in pairs,
which introduced another quirk:
* If some `pyproject.toml` file specified `extend-select`
or `extend-ignore`, `select` and `ignore` became pretty much
unreliable after that with no way of resetting that.
This commit fixes all of these quirks by making later configuration
sources take precedence over earlier configuration sources.
While this is a breaking change, it fixes the broken status quo.
not-my-profile
added a commit
to not-my-profile/ruff
that referenced
this pull request
Jan 29, 2023
Ruff allows rules to be enabled with `select` and disabled with
`ignore`, where the more specific rule selector takes precedence,
for example:
`--select ALL --ignore E501` selects all rules except E501
`--ignore ALL --select E501` selects only E501
(If both selectors have the same specificity ignore selectors
take precedence.)
Ruff always had two quirks:
* If `pyproject.toml` specified `ignore = ["E501"]` then you could
previously not override that with `--select E501` on the command-line
(since the resolution didn't take into account that the select was
specified after the ignore).
* If `pyproject.toml` specified `select = ["E501"]` then you could
previously not override that with `--ignore E` on the command-line
(since the resolution didn't take into account that the ignore was
specified after the select).
Since d067efe (astral-sh#1245)
`extend-select` and `extend-ignore` always override
`select` and `ignore` and are applied iteratively in pairs,
which introduced another quirk:
* If some `pyproject.toml` file specified `extend-select`
or `extend-ignore`, `select` and `ignore` became pretty much
unreliable after that with no way of resetting that.
This commit fixes all of these quirks by making later configuration
sources take precedence over earlier configuration sources.
While this is a breaking change, it fixes the broken status quo.
not-my-profile
added a commit
to not-my-profile/ruff
that referenced
this pull request
Jan 29, 2023
Ruff allows rules to be enabled with `select` and disabled with
`ignore`, where the more specific rule selector takes precedence,
for example:
`--select ALL --ignore E501` selects all rules except E501
`--ignore ALL --select E501` selects only E501
(If both selectors have the same specificity ignore selectors
take precedence.)
Ruff always had two quirks:
* If `pyproject.toml` specified `ignore = ["E501"]` then you could
previously not override that with `--select E501` on the command-line
(since the resolution didn't take into account that the select was
specified after the ignore).
* If `pyproject.toml` specified `select = ["E501"]` then you could
previously not override that with `--ignore E` on the command-line
(since the resolution didn't take into account that the ignore was
specified after the select).
Since d067efe (astral-sh#1245)
`extend-select` and `extend-ignore` always override
`select` and `ignore` and are applied iteratively in pairs,
which introduced another quirk:
* If some `pyproject.toml` file specified `extend-select`
or `extend-ignore`, `select` and `ignore` became pretty much
unreliable after that with no way of resetting that.
This commit fixes all of these quirks by making later configuration
sources take precedence over earlier configuration sources.
While this is a breaking change, it fixes the broken status quo.
not-my-profile
added a commit
to not-my-profile/ruff
that referenced
this pull request
Jan 29, 2023
Ruff allows rules to be enabled with `select` and disabled with
`ignore`, where the more specific rule selector takes precedence,
for example:
`--select ALL --ignore E501` selects all rules except E501
`--ignore ALL --select E501` selects only E501
(If both selectors have the same specificity ignore selectors
take precedence.)
Ruff always had two quirks:
* If `pyproject.toml` specified `ignore = ["E501"]` then you could
previously not override that with `--select E501` on the command-line
(since the resolution didn't take into account that the select was
specified after the ignore).
* If `pyproject.toml` specified `select = ["E501"]` then you could
previously not override that with `--ignore E` on the command-line
(since the resolution didn't take into account that the ignore was
specified after the select).
Since d067efe (astral-sh#1245)
`extend-select` and `extend-ignore` always override
`select` and `ignore` and are applied iteratively in pairs,
which introduced another quirk:
* If some `pyproject.toml` file specified `extend-select`
or `extend-ignore`, `select` and `ignore` became pretty much
unreliable after that with no way of resetting that.
This commit fixes all of these quirks by making later configuration
sources take precedence over earlier configuration sources.
While this is a breaking change, it fixes the broken status quo.
not-my-profile
added a commit
to not-my-profile/ruff
that referenced
this pull request
Jan 29, 2023
Ruff allows rules to be enabled with `select` and disabled with
`ignore`, where the more specific rule selector takes precedence,
for example:
`--select ALL --ignore E501` selects all rules except E501
`--ignore ALL --select E501` selects only E501
(If both selectors have the same specificity ignore selectors
take precedence.)
Ruff always had two quirks:
* If `pyproject.toml` specified `ignore = ["E501"]` then you could
previously not override that with `--select E501` on the command-line
(since the resolution didn't take into account that the select was
specified after the ignore).
* If `pyproject.toml` specified `select = ["E501"]` then you could
previously not override that with `--ignore E` on the command-line
(since the resolution didn't take into account that the ignore was
specified after the select).
Since d067efe (astral-sh#1245)
`extend-select` and `extend-ignore` always override
`select` and `ignore` and are applied iteratively in pairs,
which introduced another quirk:
* If some `pyproject.toml` file specified `extend-select`
or `extend-ignore`, `select` and `ignore` became pretty much
unreliable after that with no way of resetting that.
This commit fixes all of these quirks by making later configuration
sources take precedence over earlier configuration sources.
While this is a breaking change, we expect most ruff configuration
files to not rely on the previous unintutive behavior.
not-my-profile
added a commit
to not-my-profile/ruff
that referenced
this pull request
Jan 30, 2023
Ruff allows rules to be enabled with `select` and disabled with
`ignore`, where the more specific rule selector takes precedence,
for example:
`--select ALL --ignore E501` selects all rules except E501
`--ignore ALL --select E501` selects only E501
(If both selectors have the same specificity ignore selectors
take precedence.)
Ruff always had two quirks:
* If `pyproject.toml` specified `ignore = ["E501"]` then you could
previously not override that with `--select E501` on the command-line
(since the resolution didn't take into account that the select was
specified after the ignore).
* If `pyproject.toml` specified `select = ["E501"]` then you could
previously not override that with `--ignore E` on the command-line
(since the resolution didn't take into account that the ignore was
specified after the select).
Since d067efe (astral-sh#1245)
`extend-select` and `extend-ignore` always override
`select` and `ignore` and are applied iteratively in pairs,
which introduced another quirk:
* If some `pyproject.toml` file specified `extend-select`
or `extend-ignore`, `select` and `ignore` became pretty much
unreliable after that with no way of resetting that.
This commit fixes all of these quirks by making later configuration
sources take precedence over earlier configuration sources.
While this is a breaking change, we expect most ruff configuration
files to not rely on the previous unintutive behavior.
not-my-profile
added a commit
to not-my-profile/ruff
that referenced
this pull request
Jan 30, 2023
Ruff allows rules to be enabled with `select` and disabled with
`ignore`, where the more specific rule selector takes precedence,
for example:
`--select ALL --ignore E501` selects all rules except E501
`--ignore ALL --select E501` selects only E501
(If both selectors have the same specificity ignore selectors
take precedence.)
Ruff always had two quirks:
* If `pyproject.toml` specified `ignore = ["E501"]` then you could
previously not override that with `--select E501` on the command-line
(since the resolution didn't take into account that the select was
specified after the ignore).
* If `pyproject.toml` specified `select = ["E501"]` then you could
previously not override that with `--ignore E` on the command-line
(since the resolution didn't take into account that the ignore was
specified after the select).
Since d067efe (astral-sh#1245)
`extend-select` and `extend-ignore` always override
`select` and `ignore` and are applied iteratively in pairs,
which introduced another quirk:
* If some `pyproject.toml` file specified `extend-select`
or `extend-ignore`, `select` and `ignore` became pretty much
unreliable after that with no way of resetting that.
This commit fixes all of these quirks by making later configuration
sources take precedence over earlier configuration sources.
While this is a breaking change, we expect most ruff configuration
files to not rely on the previous unintutive behavior.
charliermarsh
pushed a commit
that referenced
this pull request
Jan 30, 2023
Ruff allows rules to be enabled with `select` and disabled with
`ignore`, where the more specific rule selector takes precedence,
for example:
`--select ALL --ignore E501` selects all rules except E501
`--ignore ALL --select E501` selects only E501
(If both selectors have the same specificity ignore selectors
take precedence.)
Ruff always had two quirks:
* If `pyproject.toml` specified `ignore = ["E501"]` then you could
previously not override that with `--select E501` on the command-line
(since the resolution didn't take into account that the select was
specified after the ignore).
* If `pyproject.toml` specified `select = ["E501"]` then you could
previously not override that with `--ignore E` on the command-line
(since the resolution didn't take into account that the ignore was
specified after the select).
Since d067efe (#1245)
`extend-select` and `extend-ignore` always override
`select` and `ignore` and are applied iteratively in pairs,
which introduced another quirk:
* If some `pyproject.toml` file specified `extend-select`
or `extend-ignore`, `select` and `ignore` became pretty much
unreliable after that with no way of resetting that.
This commit fixes all of these quirks by making later configuration
sources take precedence over earlier configuration sources.
While this is a breaking change, we expect most ruff configuration
files to not rely on the previous unintutive behavior.
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
1 participant
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
Now, every
--extend-ignoreand--extend-selectpair is applied iteratively (rather than "overriding" the--extend-ignoreand--extend-selectof something else).This sounds complicated, but I think the semantics are more intuitive.
As an example, say you have this in your
pyproject.toml:Today, if you run
ruff /path/to/file.py --extend-select F401, we won't actually detectF401, because today, it's treated as equivalent to:And ignores "beat" selects.
As of this PR, the same setup would trigger
F401, since we now resolve the first (select, ignore) pair, then apply the next (select, ignore) pair to the resolved codes, and so on.This is particularly useful with configuration extension via
extend, as the childpyproject.tomlcan always enable and disable codes (whereas before, if a parent disabled a specific code, it was impossible for the child to re-enable it).Resolves #1216.