19294: sys/shell: don't include suit command by default r=maribu a=benpicco



Co-authored-by: Benjamin Valentin <[email protected]>

18392: drivers/servo: reimplement with high level interface r=benpicco a=maribu

### Contribution description

The previous servo driver didn't provide any benefit over using PWM directly, as users controlled the servo in terms of PWM duty cycles. This changes the interface to provide a high level interface that abstracts the gory PWM details.

In addition, a SAUL layer and auto-initialization is provided.

### Testing procedure

The test application provides access to the servo driver via the `saul` shell command.

```
> saul
2022-08-02 22:12:31,826 # saul
2022-08-02 22:12:31,827 # ID	Class		Name
2022-08-02 22:12:31,830 # #0	ACT_SWITCH	LD1(green)
2022-08-02 22:12:31,832 # #1	ACT_SWITCH	LD2(blue)
2022-08-02 22:12:31,834 # #2	ACT_SWITCH	LD3(red)
2022-08-02 22:12:31,837 # #3	SENSE_BTN	B1(User button)
2022-08-02 22:12:31,838 # #4	ACT_SERVO	servo
> saul write 4 0
2022-08-02 22:12:41,443 # saul write 4 0
2022-08-02 22:12:41,445 # Writing to device #4 - servo
2022-08-02 22:12:41,447 # Data:	             0 
2022-08-02 22:12:41,450 # [servo] setting 0 to 2949 (0 / 255)
2022-08-02 22:12:41,453 # data successfully written to device #4
> saul write 4 256
2022-08-02 22:12:45,343 # saul write 4 256
2022-08-02 22:12:45,346 # Writing to device #4 - servo
2022-08-02 22:12:45,347 # Data:	           256 
2022-08-02 22:12:45,351 # [servo] setting 0 to 6865 (255 / 255)
2022-08-02 22:12:45,354 # data successfully written to device #4
```

Each write resulted in the MG90S servo that I connected to move to the corresponding position.

### Issues/PRs references

19292: sys/phydat: Fix unit confusion r=benpicco a=maribu

### Contribution description

Previously, `UNIT_G` was used for g-force with the correct symbol `g`, `UNIT_GR` for gram (as in kilogram) with the incorrect symbol `G` (which would be correct for Gauss), and `UNIT_GS` for Gauss with symbol `Gs` (which is an alternative correct symbol).

To avoid confusion between G-Force, Gauss, and Gram the units have been renamed to `UNIT_G_FORCE`, `UNIT_GRAM`, and `UNIT_GAUSS`. In addition, gram now uses the correct symbol `g`; which sadly is the same as for g-force. But usually there is enough context to tell them apart.

### Testing procedure

Green CI

### Issues/PRs references

None

19294: sys/shell: don't include suit command by default r=benpicco a=benpicco



19295: gcoap: Finish the gcoap_get_resource_list_tl -> gcoap_get_resource_list renaming r=benpicco a=chrysn

### Contribution description

In #16688, an argument was added to the `gcoap_get_resource_list` function by creating a new function `gcoap_get_resource_list_tl` with a deprecation and roll-over plan.

This plan has not been acted on so far.

This PR shortens the original plan by just adding the argument to `gcoap_get_resource_list` and removing `gcoap_get_resource_list_tl` in a single go. The rationale for this deviation is that while it's a public API, its only two practical consumers are the (built-in) well-known/core implementation, and the (built-in) CoRE Resource Directory (cord) endpoint. Moreover, a further change to this API (switching over to `coap_block_slicer_t`) is expected to happen within this release cycle, which would take something like 4 total releases to get through otherwise, which is unrealistic for an API that there are no known external users of.

A second commit clean up ToDo items (in the changed function's documentation) that referred to a IETF draft that has long been abandoned by the CoRE WG.

### Testing procedure

Plain inspection and CI passing should suffice.

### AOB

There is a second analogous pair left over from #16688, `gcoap_req_send` / `gcoap_req_send_tl`. As that *is* expected to be used widely, I prefer not to mix these two concerns, and get the present one through without unnecessary hold-up.

Co-authored-by: Marian Buschsieweke <[email protected]>
Co-authored-by: Benjamin Valentin <[email protected]>
Co-authored-by: chrysn <[email protected]>