After a new camera appears on the network (with the description openipc-gk7205v2x0), immediately reboot it by power.

After rebooting (this must be done!), log in to the camera via SSH using the username root and the password 12345 and execute the following commands:

fw_setenv ethaddr e4:e6:6c:23:84:89

firstboot

The camera will set the original MAC address of the device, perform all necessary configurations, and reboot.

Transition firmware for CamHi / HiChip / Xin boards created by mr. John

Transition firmware for Longse/Herospeed boards

Original firmware and recovery files for XiongMai-based boards

Transition firmware for XiongMai-based boards