fix(gateway): consume was_auto_reset flag to prevent model-override wipe after auto-reset#48062
Closed
x7peeps wants to merge 1 commit into
Closed
fix(gateway): consume was_auto_reset flag to prevent model-override wipe after auto-reset#48062x7peeps wants to merge 1 commit into
x7peeps wants to merge 1 commit into
Conversation
…ipe after auto-reset When /model <name> is the first message after a session auto-reset, the command handler (_handle_model_command) returns directly without entering _handle_message_with_agent(), so was_auto_reset is never consumed. The next regular message finds the flag still True and the cleanup at line 8378 wipes _session_model_overrides, silently losing the model switch. Two-part fix: 1. In _handle_message_with_agent(), capture was_auto_reset into a local variable and consume the flag immediately after the cleanup block, so subsequent messages in the same auto-reset session do not re-fire the cleanup. 2. In _handle_model_command(), consume was_auto_reset on the session entry obtained from get_or_create_session(), so that even when the command bypasses _handle_message_with_agent(), the flag is cleared before the next regular message arrives. Closes NousResearch#48031
alt-glitch
added
type/bug
Closed
6 tasks
kshitijk4poor
pushed a commit
that referenced
this pull request
Jun 24, 2026
…reset
When `/model X` is the FIRST message after an idle/daily/suspended auto-reset,
the slash-command path stores a session model override but leaves
`session_entry.was_auto_reset = True` (it never passes through
`_handle_message_with_agent`, which is where the flag was consumed). On the
NEXT regular message, the auto-reset cleanup block pops the freshly-stored
model/reasoning override BEFORE the flag is consumed — so the switch is
silently lost and resolution falls back to the config default, while the
session DB still shows the switched model (a two-sources-of-truth divergence).
Consume the flag at both sites:
1. gateway/run.py — capture `was_auto_reset` into a local and set the
attribute False immediately at the top of the cleanup block, so the
cleanup can't re-fire on a later message and wipe an override stored
between turns. Downstream reads use the captured local.
2. gateway/slash_commands.py — the model path consumes the flag before
storing the override, so a /model-first-after-auto-reset isn't wiped by
the next message's cleanup.
Salvaged from #48062 by x7peeps (authorship preserved).
Tests: tests/gateway/test_48031_model_switch_after_auto_reset.py — AST
invariants pinning both consume sites (load-bearing; verified they fail when
either consume is removed). Mirrors the AST-pin approach in
test_35809_auto_reset_clean_context.py. Gateway session/reset suite: 16 passed.
Fixes #48031
Collaborator
|
Thanks for the fix — same root cause (the |
pai-scaffolde
pushed a commit
to pai-scaffolde/hermes-agent
that referenced
this pull request
Jun 28, 2026
…reset
When `/model X` is the FIRST message after an idle/daily/suspended auto-reset,
the slash-command path stores a session model override but leaves
`session_entry.was_auto_reset = True` (it never passes through
`_handle_message_with_agent`, which is where the flag was consumed). On the
NEXT regular message, the auto-reset cleanup block pops the freshly-stored
model/reasoning override BEFORE the flag is consumed — so the switch is
silently lost and resolution falls back to the config default, while the
session DB still shows the switched model (a two-sources-of-truth divergence).
Consume the flag at both sites:
1. gateway/run.py — capture `was_auto_reset` into a local and set the
attribute False immediately at the top of the cleanup block, so the
cleanup can't re-fire on a later message and wipe an override stored
between turns. Downstream reads use the captured local.
2. gateway/slash_commands.py — the model path consumes the flag before
storing the override, so a /model-first-after-auto-reset isn't wiped by
the next message's cleanup.
Salvaged from NousResearch#48062 by x7peeps (authorship preserved).
Tests: tests/gateway/test_48031_model_switch_after_auto_reset.py — AST
invariants pinning both consume sites (load-bearing; verified they fail when
either consume is removed). Mirrors the AST-pin approach in
test_35809_auto_reset_clean_context.py. Gateway session/reset suite: 16 passed.
Fixes NousResearch#48031
waefrebeorn
pushed a commit
to waefrebeorn/slermes
that referenced
this pull request
Jul 2, 2026
…reset
When `/model X` is the FIRST message after an idle/daily/suspended auto-reset,
the slash-command path stores a session model override but leaves
`session_entry.was_auto_reset = True` (it never passes through
`_handle_message_with_agent`, which is where the flag was consumed). On the
NEXT regular message, the auto-reset cleanup block pops the freshly-stored
model/reasoning override BEFORE the flag is consumed — so the switch is
silently lost and resolution falls back to the config default, while the
session DB still shows the switched model (a two-sources-of-truth divergence).
Consume the flag at both sites:
1. gateway/run.py — capture `was_auto_reset` into a local and set the
attribute False immediately at the top of the cleanup block, so the
cleanup can't re-fire on a later message and wipe an override stored
between turns. Downstream reads use the captured local.
2. gateway/slash_commands.py — the model path consumes the flag before
storing the override, so a /model-first-after-auto-reset isn't wiped by
the next message's cleanup.
Salvaged from NousResearch#48062 by x7peeps (authorship preserved).
Tests: tests/gateway/test_48031_model_switch_after_auto_reset.py — AST
invariants pinning both consume sites (load-bearing; verified they fail when
either consume is removed). Mirrors the AST-pin approach in
test_35809_auto_reset_clean_context.py. Gateway session/reset suite: 16 passed.
Fixes NousResearch#48031
liuchanchen
pushed a commit
to liuchanchen/hermes-agent
that referenced
this pull request
Jul 3, 2026
…reset
When `/model X` is the FIRST message after an idle/daily/suspended auto-reset,
the slash-command path stores a session model override but leaves
`session_entry.was_auto_reset = True` (it never passes through
`_handle_message_with_agent`, which is where the flag was consumed). On the
NEXT regular message, the auto-reset cleanup block pops the freshly-stored
model/reasoning override BEFORE the flag is consumed — so the switch is
silently lost and resolution falls back to the config default, while the
session DB still shows the switched model (a two-sources-of-truth divergence).
Consume the flag at both sites:
1. gateway/run.py — capture `was_auto_reset` into a local and set the
attribute False immediately at the top of the cleanup block, so the
cleanup can't re-fire on a later message and wipe an override stored
between turns. Downstream reads use the captured local.
2. gateway/slash_commands.py — the model path consumes the flag before
storing the override, so a /model-first-after-auto-reset isn't wiped by
the next message's cleanup.
Salvaged from NousResearch#48062 by x7peeps (authorship preserved).
Tests: tests/gateway/test_48031_model_switch_after_auto_reset.py — AST
invariants pinning both consume sites (load-bearing; verified they fail when
either consume is removed). Mirrors the AST-pin approach in
test_35809_auto_reset_clean_context.py. Gateway session/reset suite: 16 passed.
Fixes NousResearch#48031
Methodician
added a commit
to Methodician/hermes-agent
that referenced
this pull request
Jul 4, 2026
…reset
When `/model X` is the FIRST message after an idle/daily/suspended auto-reset,
the slash-command path stores a session model override but leaves
`session_entry.was_auto_reset = True` (it never passes through
`_handle_message_with_agent`, which is where the flag was consumed). On the
NEXT regular message, the auto-reset cleanup block pops the freshly-stored
model/reasoning override BEFORE the flag is consumed — so the switch is
silently lost and resolution falls back to the config default, while the
session DB still shows the switched model (a two-sources-of-truth divergence).
Consume the flag at both sites:
1. gateway/run.py — capture `was_auto_reset` into a local and set the
attribute False immediately at the top of the cleanup block, so the
cleanup can't re-fire on a later message and wipe an override stored
between turns. Downstream reads use the captured local.
2. gateway/slash_commands.py — the model path consumes the flag before
storing the override, so a /model-first-after-auto-reset isn't wiped by
the next message's cleanup.
Salvaged from NousResearch#48062 by x7peeps (authorship preserved).
Tests: tests/gateway/test_48031_model_switch_after_auto_reset.py — AST
invariants pinning both consume sites (load-bearing; verified they fail when
either consume is removed). Mirrors the AST-pin approach in
test_35809_auto_reset_clean_context.py. Gateway session/reset suite: 16 passed.
Fixes NousResearch#48031
habarmc1223-sudo
pushed a commit
to habarmc1223-sudo/hermes-agent-fluxmem
that referenced
this pull request
Jul 8, 2026
…reset
When `/model X` is the FIRST message after an idle/daily/suspended auto-reset,
the slash-command path stores a session model override but leaves
`session_entry.was_auto_reset = True` (it never passes through
`_handle_message_with_agent`, which is where the flag was consumed). On the
NEXT regular message, the auto-reset cleanup block pops the freshly-stored
model/reasoning override BEFORE the flag is consumed — so the switch is
silently lost and resolution falls back to the config default, while the
session DB still shows the switched model (a two-sources-of-truth divergence).
Consume the flag at both sites:
1. gateway/run.py — capture `was_auto_reset` into a local and set the
attribute False immediately at the top of the cleanup block, so the
cleanup can't re-fire on a later message and wipe an override stored
between turns. Downstream reads use the captured local.
2. gateway/slash_commands.py — the model path consumes the flag before
storing the override, so a /model-first-after-auto-reset isn't wiped by
the next message's cleanup.
Salvaged from NousResearch#48062 by x7peeps (authorship preserved).
Tests: tests/gateway/test_48031_model_switch_after_auto_reset.py — AST
invariants pinning both consume sites (load-bearing; verified they fail when
either consume is removed). Mirrors the AST-pin approach in
test_35809_auto_reset_clean_context.py. Gateway session/reset suite: 16 passed.
Fixes NousResearch#48031
santhreal
pushed a commit
to santhreal/hermes-agent
that referenced
this pull request
Jul 13, 2026
…reset
When `/model X` is the FIRST message after an idle/daily/suspended auto-reset,
the slash-command path stores a session model override but leaves
`session_entry.was_auto_reset = True` (it never passes through
`_handle_message_with_agent`, which is where the flag was consumed). On the
NEXT regular message, the auto-reset cleanup block pops the freshly-stored
model/reasoning override BEFORE the flag is consumed — so the switch is
silently lost and resolution falls back to the config default, while the
session DB still shows the switched model (a two-sources-of-truth divergence).
Consume the flag at both sites:
1. gateway/run.py — capture `was_auto_reset` into a local and set the
attribute False immediately at the top of the cleanup block, so the
cleanup can't re-fire on a later message and wipe an override stored
between turns. Downstream reads use the captured local.
2. gateway/slash_commands.py — the model path consumes the flag before
storing the override, so a /model-first-after-auto-reset isn't wiped by
the next message's cleanup.
Salvaged from NousResearch#48062 by x7peeps (authorship preserved).
Tests: tests/gateway/test_48031_model_switch_after_auto_reset.py — AST
invariants pinning both consume sites (load-bearing; verified they fail when
either consume is removed). Mirrors the AST-pin approach in
test_35809_auto_reset_clean_context.py. Gateway session/reset suite: 16 passed.
Fixes NousResearch#48031
kulikman
pushed a commit
to kulikman/hermes-agent
that referenced
this pull request
Jul 16, 2026
…reset
When `/model X` is the FIRST message after an idle/daily/suspended auto-reset,
the slash-command path stores a session model override but leaves
`session_entry.was_auto_reset = True` (it never passes through
`_handle_message_with_agent`, which is where the flag was consumed). On the
NEXT regular message, the auto-reset cleanup block pops the freshly-stored
model/reasoning override BEFORE the flag is consumed — so the switch is
silently lost and resolution falls back to the config default, while the
session DB still shows the switched model (a two-sources-of-truth divergence).
Consume the flag at both sites:
1. gateway/run.py — capture `was_auto_reset` into a local and set the
attribute False immediately at the top of the cleanup block, so the
cleanup can't re-fire on a later message and wipe an override stored
between turns. Downstream reads use the captured local.
2. gateway/slash_commands.py — the model path consumes the flag before
storing the override, so a /model-first-after-auto-reset isn't wiped by
the next message's cleanup.
Salvaged from NousResearch#48062 by x7peeps (authorship preserved).
Tests: tests/gateway/test_48031_model_switch_after_auto_reset.py — AST
invariants pinning both consume sites (load-bearing; verified they fail when
either consume is removed). Mirrors the AST-pin approach in
test_35809_auto_reset_clean_context.py. Gateway session/reset suite: 16 passed.
Fixes NousResearch#48031
Gravezzz
pushed a commit
to Gravezzz/hermes-agent
that referenced
this pull request
Jul 21, 2026
…reset
When `/model X` is the FIRST message after an idle/daily/suspended auto-reset,
the slash-command path stores a session model override but leaves
`session_entry.was_auto_reset = True` (it never passes through
`_handle_message_with_agent`, which is where the flag was consumed). On the
NEXT regular message, the auto-reset cleanup block pops the freshly-stored
model/reasoning override BEFORE the flag is consumed — so the switch is
silently lost and resolution falls back to the config default, while the
session DB still shows the switched model (a two-sources-of-truth divergence).
Consume the flag at both sites:
1. gateway/run.py — capture `was_auto_reset` into a local and set the
attribute False immediately at the top of the cleanup block, so the
cleanup can't re-fire on a later message and wipe an override stored
between turns. Downstream reads use the captured local.
2. gateway/slash_commands.py — the model path consumes the flag before
storing the override, so a /model-first-after-auto-reset isn't wiped by
the next message's cleanup.
Salvaged from NousResearch#48062 by x7peeps (authorship preserved).
Tests: tests/gateway/test_48031_model_switch_after_auto_reset.py — AST
invariants pinning both consume sites (load-bearing; verified they fail when
either consume is removed). Mirrors the AST-pin approach in
test_35809_auto_reset_clean_context.py. Gateway session/reset suite: 16 passed.
Fixes NousResearch#48031
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
3 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
Problem
/model <name>switch is silently lost when it's the first message after a session auto-reset. The session DB shows the new model, the UI says the new model, but actual API calls use the previous/default model.Root Cause
/modelcommands are handled by_handle_model_command()which returns directly without entering_handle_message_with_agent(), wherewas_auto_resetis normally consumed. The next regular message findswas_auto_resetstillTrueand the cleanup at line 8378 wipes_session_model_overrides, silently losing the model override set by/model.Fix
Two-part fix:
_handle_message_with_agent()(run.py): Capturewas_auto_resetinto a local variable and consume the flag immediately after the cleanup block so subsequent messages in the same auto-reset session don't re-fire the cleanup._handle_model_command()(slash_commands.py): Consumewas_auto_reseton the session entry obtained fromget_or_create_session()so that even when the command bypasses_handle_message_with_agent(), the flag is cleared before the next regular message arrives.Verification
was_auto_resetconsumed immediately after cleanup prevents re-fire_is_new_sessionand context notice still work (use saved local variable)/model Xas first message after auto-reset now works correctlyCloses #48031