Connect your inkVision(R) devices to Home Assistant for local monitoring and control. No cloud account is needed: the integration talks to the device directly on your network and receives updates in real time.
HomeBrainz develops the inkVision(R) product line. Learn more at homebrainz.eu and inkvision.eu.
Works with inkVision(R) devices running HomeBrainz firmware. Available entities depend on the device model and its sensors.
- Local and real-time: live updates over your local network, with automatic reconnection
- Easy setup: devices are discovered automatically; you can also add one by IP address
- Environment sensors: temperature, humidity, pressure, and air quality (IAQ, CO2 equivalent, VOC) on supported models
- Display controls: brightness, timezone, and which screens the display rotates through
- Speaker (models with a speaker): use the device as a media player for text-to-speech, internet radio, and your Home Assistant media library
- Firmware updates: see when an update is available and install it from Home Assistant
- Click the button above, or open HACS in Home Assistant and search for inkVision
- Click Download
- Restart Home Assistant
- Download the latest release from the releases page
- Copy the
custom_components/inkvisionfolder into thecustom_componentsfolder of your Home Assistant configuration directory (createcustom_componentsif it does not exist) - Restart Home Assistant
Devices on your network are usually discovered automatically and appear under Settings > Devices & Services as ready to configure. To add a device yourself:
- Go to Settings > Devices & Services
- Click Add Integration and search for inkVision
- Enter the device's IP address or hostname
You can find the device's IP address in your router's list of connected devices.
This integration used to be called HomeBrainz (homebrainz). After you update it in HACS and restart Home Assistant, your devices move to inkVision automatically. Entity IDs, history, dashboards and device IDs stay the same.
- Actions were renamed from
homebrainz.*toinkvision.*. The old names keep working; when an automation or script uses one, a notice under Settings > Repairs tells you which action to change. - HACS leaves the old
custom_components/homebrainzfolder behind. A repair notice offers to delete it; restart Home Assistant afterwards. Until then the old entries stay under HomeBrainz as disabled, so the old code cannot add the devices again; they are removed on the first start without the folder.
The integration creates the following entities, depending on your device:
| Platform | Description |
|---|---|
sensor |
Environment and air-quality readings, Wi-Fi signal, and device diagnostics |
number |
Display brightness |
select |
Device timezone, and what each button tap / long press does on the clock |
switch |
Screens shown in the display rotation |
binary_sensor |
Firmware update available |
button |
Check for and install firmware updates |
event |
Button 1 / Button 2 touch gestures (single_tap, long_press) on the Atmos Smart Clock |
media_player |
Speaker playback, volume, and mute |
inkvision.set_brightness: set the display brightnessinkvision.display_text: show a custom text on the displayinkvision.restart_device: restart the deviceinkvision.set_screen_rotation: choose which screens the display rotates throughinkvision.set_timezone: set the device timezoneinkvision.set_custom_screen: set the text of a custom screen (slot 1-4); empty text removes it
All services take a target device and can be tried out under Developer Tools > Actions.
Each touch button of the Atmos Smart Clock has an event entity that fires on every single tap and long press, so you can use it as an automation trigger. The event's action attribute tells you what the clock did itself. If you want a button to do nothing on the clock and only trigger your automation, set its action to None (Home Assistant only), either with the button action selects on the device page or in the HomeBrainz app.
triggers:
- trigger: state
entity_id: event.atmos_smart_clock_button_1
attribute: event_type
to: long_press
actions:
- action: light.toggle
target:
entity_id: light.living_roomThe clock can show up to 4 custom screens in its rotation, after the regular screens. Set them under Settings > Devices & services > inkVision > Configure as templates, for example {{ states('sensor.outdoor_temperature') }}°C. A screen updates whenever its template's result changes. Text longer than the display scrolls. Leave a field empty to remove that screen. You can also set screens from automations with inkvision.set_custom_screen.
The clock doesn't store custom screens. Home Assistant sends them again whenever it reconnects, and clears them when the integration is unloaded.
Each device has its own settings page. Open it from the device page in Home Assistant (Visit).
- Make sure the device is powered on and connected to Wi-Fi
- Check that Home Assistant and the device are on the same network (same subnet/VLAN)
- Open the device's settings page from a browser to confirm it is reachable
- Reload the integration under Settings > Devices & Services
- Make sure the device firmware is up to date
- Check that the volume is not muted or set very low
- Check the Home Assistant logs for messages from the inkVision integration
Sensors are created only for the hardware your device has. If an expected sensor is missing, update the firmware and reload the integration.
Found a bug or have a feature request? Please open an issue.