Search results

CAM: Multipass in Profile Op ignore start point

Status: Needs confirmationMissing confirmation from other testersMissing confirmation from other testers

Status: Needs triageMissing triageMissing triage

Status: Open.

#27878 In FreeCAD/FreeCAD;

· Connor9220 opened on Feb 25, 2026

FEM: CalculiX coupling constraints are not supported

Status: Needs confirmationMissing confirmation from other testersMissing confirmation from other testers

Status: Needs triageMissing triageMissing triage

Status: Open.

#27877 In FreeCAD/FreeCAD;

· FEA-eng opened on Feb 25, 2026

1.1RC2 and 1.1RC3 cannot see network drives on linux

Mod: CoreIssue or PR touches core sections (App, Gui, Base) of FreeCADIssue or PR touches core sections (App, Gui, Base) of FreeCAD

OS: Linux

Status: Needs confirmationMissing confirmation from other testersMissing confirmation from other testers

Status: Needs test on stable versionMissing test on the stable release version in safe modeMissing test on the stable release version in safe mode

Status: Open.

Bug

#27872 In FreeCAD/FreeCAD;

· philjynx opened on Feb 25, 2026

BIM+Draft: TD DraftView and ArchView should obey the TD line cap preference

Mod: BIMRelated to the BIM WorkbenchRelated to the BIM Workbench

Mod: DraftRelated to the Draft WorkbenchRelated to the Draft Workbench

Type: FeatureFR for improvements or new featuresFR for improvements or new features

Status: Open.

Feature

#27866 In FreeCAD/FreeCAD;

· Roy-043 opened on Feb 25, 2026

Application crash following "Attachement Offset" dialog

Mod: PartRelated to the Part WorkbenchRelated to the Part Workbench

Status: ConfirmedThe issue was confirmed by othersThe issue was confirmed by others

Topic: User InterfaceIssue related UI / UXIssue related UI / UX

Type: BugThis issue or PR is related to a bugThis issue or PR is related to a bug

Type: CrashFor issues describing crashes or PRs fixing oneFor issues describing crashes or PRs fixing one

Status: Open.

Bug

#27865 In FreeCAD/FreeCAD;

· piotrmmurawski-sys opened on Feb 25, 2026

Inconsistency in decimal separator between "." (period) and "," (comma).

Mod: SpreadsheetRelated to the Spreadsheet WorkbenchRelated to the Spreadsheet Workbench

Status: ConfirmedThe issue was confirmed by othersThe issue was confirmed by others

Topic: UnitsIssue related to units of measurementIssue related to units of measurement

Topic: User InterfaceIssue related UI / UXIssue related UI / UX

Type: BugThis issue or PR is related to a bugThis issue or PR is related to a bug

Status: Open.

Bug

#27858 In FreeCAD/FreeCAD;

· hkazu opened on Feb 24, 2026

PartDesign Fillet tool intermittently creates non-manifold edges when blending external corners meeting at an angle less than 180deg

3rd party: OCC

Mod: Part DesignRelated to the Part Design WorkbenchRelated to the Part Design Workbench

Status: ConfirmedThe issue was confirmed by othersThe issue was confirmed by others

Topic: FilletsFillet or chamfer related issuesFillet or chamfer related issues

Type: BugThis issue or PR is related to a bugThis issue or PR is related to a bug

Status: Open.

Bug

#27839 In FreeCAD/FreeCAD;

· empirebuilder1 opened on Feb 24, 2026

Style: push buttons' pushed/not pushed states are visually indistinguishable

Mod: CoreIssue or PR touches core sections (App, Gui, Base) of FreeCADIssue or PR touches core sections (App, Gui, Base) of FreeCAD

Topic: StylesheetsAnything regarding stylesheets/themesAnything regarding stylesheets/themes

Topic: User InterfaceIssue related UI / UXIssue related UI / UX

Type: FeatureFR for improvements or new featuresFR for improvements or new features

Status: Open.

Feature

#27834 In FreeCAD/FreeCAD;

· furgo16 opened on Feb 23, 2026

Part: Primitives' "3D View" Location button does not describe its action

Good first issueSuitable issues for potential first-time contributorsSuitable issues for potential first-time contributors

Mod: PartRelated to the Part WorkbenchRelated to the Part Workbench

Topic: User InterfaceIssue related UI / UXIssue related UI / UX

Type: FeatureFR for improvements or new featuresFR for improvements or new features

Status: Open.

Feature

#27833 In FreeCAD/FreeCAD;

· furgo16 opened on Feb 23, 2026

CAM: Post Process export gcode with no RPM

Good first issueSuitable issues for potential first-time contributorsSuitable issues for potential first-time contributors

Mod: CAMRelated to the CAM WorkbenchRelated to the CAM Workbench

Type: FeatureFR for improvements or new featuresFR for improvements or new features

Status: Open.

Feature

#27830 In FreeCAD/FreeCAD;

· hunson817 opened on Feb 23, 2026

CAM: Adaptive "finish depth" AKA "Finish step down" in the GUI seems to be ignored when "finishing profile" is selected

Mod: CAMRelated to the CAM WorkbenchRelated to the CAM Workbench

Status: Needs confirmationMissing confirmation from other testersMissing confirmation from other testers

Status: Needs example fileMissing .zip example file from userMissing .zip example file from user

Status: Open.

Bug

#27827 In FreeCAD/FreeCAD;

· kevenwyld opened on Feb 23, 2026

[Request] Sketcher: Highlight broken vertex-references

Mod: SketcherRelated to the Sketcher WorkbenchRelated to the Sketcher Workbench

Requires: UI/UX reviewIssue/PR to be reviewed in terms of UI/UX by the Design Working Group or under refinement.Issue/PR to be reviewed in terms of UI/UX by the Design Working Group or under refinement.

Topic: User InterfaceIssue related UI / UXIssue related UI / UX

Type: FeatureFR for improvements or new featuresFR for improvements or new features

Status: Open.

Feature

#27820 In FreeCAD/FreeCAD;

· InstantMuffin opened on Feb 23, 2026