log.zip (1.9 MB)
Hi , I am trying to flash my xavier nx with sdk manager gui . I am not able to install jetpack 5.1.5 in the device . in between the board was rebooted automatically and detected again . after that there is a timeout log . i am not able to flash after that . the “Pause for a bit“ button changed to retry . it was only completed till 39.93% . in the Details tab , the flashing was at 99% . |Kindly provide a solution to resolve this issue. i have connected a F-to-F jumper at the force pin and gnd pin . all the while doing this process .
below is the zip of the exported logs
Hi,
Please use lsusb to check whether device in recovery mode.
Thanks
Hi ,
i have tried lsusb and the board is being detected . i have attached the screenshot as well .
i am currently trying to flash it with Ubuntu 20.04 .
Hi @rashiq.a.
Checking your logs the flash fail due to a timeout while waiting the jetson to boot in flash initrd.
NV_L4T_FLASH_JETSON_LINUX_COMP.log:
11:57:23.133 - Info: Waiting for target to boot-up…
11:57:24.252 - Info: Waiting for target to boot-up…
11:57:25.254 - Info: Timeout
11:57:25.254 - Info: Cleaning up…
11:57:25.736 - Error: [exec_command]: /bin/bash -c /home/vvsa/.nvsdkm/replays/scripts/JetPack_5.1.5_Linux/NV_L4T_FLASH_JETSON_LINUX_COMP.sh; [error]: 88040 blocks
11:57:25.736 - Info: [ Component Install Finished with Error ]11:57:25.740 - Info: [host] [ 752.00 KB used. Disk Avail on Partition /dev/sda4: 68.04 GB ]11:57:25.757 - Info: [ NV_L4T_FLASH_JETSON_LINUX_COMP Install took 39m55s ]
Can you confirm whether your Xavier NX is an eMMC model and if flashing it with flash.sh works? If you need help with this, you can check our Xavier NX wiki.
Best Regards,
Isaac Barrios
Embedded SW Engineer at RidgeRun
Contact us: [email protected]
Developers wiki: https://developer.ridgerun.com/
Website: www.ridgerun.com