we cannot flash the Jetson Thor with jetpack7.0 (L4T r38.2) on our custom board.
we don’t have EEPROM on our board. and I have modified the MB2 BCT file.
The flash command I used as follow: sudo ./l4t_initrd_flash.sh jetson-agx-thor-devkit internal
the flash log as follo
How to resolve this? would you please give me any suggestion?
check your UART serial log will and it might tell what is going on.
This is our uart debug log :
Can you help me find the problem? Thank you very much.
[0006.099] E> I2C: Could not write 0 bytes to slave: 0x00ac with repeat start true.
[0006.100] E> I2C_DEV: Failed to send register address 0x00000000.
[0006.102] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xac at 0x00000000 via insta.
[0006.111] E> eeprom: Retry to read I2C slave device.
[0006.117] E> I2C: slave not found in slaves.
[0006.121] E> I2C: Could not write 0 bytes to slave: 0x00ac with repeat start true.
[0006.128] E> I2C_DEV: Failed to send register address 0x00000000.
[0006.134] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xac at 0x00000000 via insta.
[0006.143] E> eeprom: Failed to read I2C slave device
[0006.148] E> CPUBL: CVB eeprom not found in h&.
what change did you do in the file? It is still trying to read CVB EEPROM.
This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.
