"After Receiving Several Reports Of Missing Persons..."

"...The Raccoon City Police Department's special S.T.A.R.S. unit immediately began investigating the affair."

These three 28mm scale 3D printed pieces are available as part of the Resident Evil 2 - Board Game - 3D Wall sets - Set 1, 2 & Corner Set 1 by the "Pro Tech Painting" eBay store, and have been designed to be used with the "cooperative board game" produced by "Steamforged Games". The large wall measures 80mm in width and 35mm in height, whilst the short and corner walls measure 40mm in width and 35mm in height.

The brick walls were initially 'cleaned up' with both a nail file and sharp modelling knife, before being primed with a double-helping of "Vallejo" Heavy Red. They were then washed using a mixture of "Citadel" Agrax Earthshade and “The Army Painter” Strong Tone Quickshade, and heavily dry-brushed with (more) "Vallejo" Heavy Red.

"Warlord Games" WIP - The ACW soldiers have been based, primed and had some of their shoes 'picked out'

With about a third of my 3D printed scenery now completed, I have had an opportunity to turn my attention to "Warlord Games" and their seemingly triumphant announcement concerning the imminent release of "Epic Battles: American Civil War". Described by the Nottingham-based company as a game "based on the familiar award-winning Black Powder rules system, with a few period-flavour tweaks to cement the battles in the ideologies of American Civil War doctrines", this 15mm scale hard plastic affair certainly seems to have whipped up quite the furore within the historical wargaming world. Not least because it's hard plastic infantry are more akin to being 13mm in height and resultantly don't appear to blend well with other similarly-sized manufacturers.

Fortunately, apart from a brief dabble in ACW with some 15mm figures by "Peter Pig" I haven't ever really given this period much thought, so decided to purchase both the January 2021 issue of "Wargames Illustrated", in order to get my hands on a single sprue of "Warlord Games" models, as well as a second-hand copy of the old Black Powder background rule-book "Glory, Hallelujah" too. Currently, I'm rather undecided as to whether I want to try my hand at such a large scale project. so simply plan to see what all the fuss is about by painting a twenty-man unit or two.

"North Star Military Figures" WIPs - The "Frostgrave" Tribal archer is slowly having all his detail painted

I have though done a bit of research on the Confederate States force of my choice and decided to go with an Alabama regiment for now. These troops eventually went the way of all Robert Edward Lee's units by predominantly wearing grey uniforms. But before 1863 were known to fight in dark blue frock coats with black broad-brimmed hats - a palette which will help me somewhat break-up the monotony of endless grey shirts and trousers...

Lastly, I have made some in-roads into my Witch's warband for "Frostgrave" by finally setting aside some dedicated hobby time on the first of my party's two archers. There certainly is a lot of detail on the "North Star Military Figures" hard plastic Tribals, so I am definitely having to be patient as I slowly pick my way up the model pouch by feathered leg-band. Fortunately, the less powerful the fighter, the less adornments I gave them, so I'm hopeful that by the time my energy starts flagging, I'll have less tricky painting subjects before me.

"Earlier This Year..."

"...A bizarre incident occurred in the Arklay Mountains, on the outskirts of an American suburb named Raccoon City."

These two 28mm scale 3D printed pieces are available as part of the Resident Evil 2 - Board Game - 3D Wall sets - Set 1 & Set 2 by the "Pro Tech Painting" eBay store, and have been designed to be used with the "cooperative board game" produced by "Steamforged Games". The large wall measures 80mm in width and 35mm in height, whilst the smaller wall measures 40mm in width and 35mm in height.

Both corrugated metal walls required some "final cleaning before painting" with a nail file and sharp modelling knife, before being undercoated with a double-helping of "Citadel" Abaddon Black. The scenic parts were then layered using some "Vallejo" Gunmetal, before being shaded with plenty of "Citadel" Nuln Oil and some sporadically-placed Agrax Earthshade.

"Marvel Crisis Protocol" WIPs - The two Black Widows are at similar stages

The walls were then dry-brushed using (more) "Vallejo" Gunmetal, and later treated to a smattering of "Mig Productions" Extreme Rust Wash in an effort to show how badly weathered some of the metal had become over time. Lastly, the pieces were given another heavy dry-brush of "Vallejo" Gunmetal in an effort to blend all the different shades and rust together.

With my latest additions to my Resident Evil 2 - Board Game completed, I have continued to work upon my two copies of the Black Widow sculpt which can be found in the "Marvel Crisis Protocol" Starter Set by "Atomic Mass Games". I plan to paint my additional figure (bought using "eBay") in Natasha Romanova's alternative all-white costume, and had been hoping to have one of these miniatures accompany my already painted Black Widow - Agent of S.H.I.E.L.D. in my ten-hero roster.

"Star Wars: Legion" WIPs - Count Dooku, Luke Skywalker and Princess Leia

Disappointingly however, having now read the expanded rule-book found only on the "Atomic Mass Games" website, it would appear that won't now be the case. I've always known I couldn't field two versions of Natasha on the actual tabletop, which frankly makes perfect sense to me, but it now appears I can only have one version of the Russian super-spy "behind the mask'" in my roster's line-up too. A situation which has admittedly somewhat dampened my enthusiasm for my little Romanova project.

Fortunately, Dave Stone over on the "Wargames Terrain Workshop" has kept me motivated with his seemingly endless array of Cantina clientele from "Star Wars". Indeed, I've been so impressed with his work that it has helped galvanise me into dusting down some of the many partially-painted models I own for "Star Wars: Legion" by "Fantasy Flight Games".

"Trapped In The Midst Of An Outbreak."

"You and your allies must work together to escape Raccoon City..."

These two 28mm scale 3D printed pieces are available as part of the Resident Evil 2 - Board Game - 3D Wall sets - Set 2 & Corner Set 1 by the "Pro Tech Painting" eBay store, and have been designed to be used with the "cooperative board game" produced by "Steamforged Games". The large wall measures 80mm in width and 35mm in height, whilst the corner wall measures 40mm in width and 35mm in height.

"...And uncover the truth behind the virus."

As advertised, the brick walls did require some quite significant "final cleaning before painting" with both a nail file and sharp modelling knife. They were then primed with two coats of "Vallejo" Heavy Red and subsequently shaded using a mixture of "Citadel" Agrax Earthshade and “The Army Painter” Strong Tone Quickshade. Finally, the models were heavily dry-brushed with (more) "Vallejo" Heavy Red.

Despite my best intentions this month to paint an entire Witch's warband for "Frostgrave", I've not really made that much progress on my hard plastic figures from the "Frostgrave: Ghost Archipelago" Tribals boxed set by "North Star Military Figures". One of the reasons for this has been that I rather fancied finishing off a metal miniature of a White Gorilla I have had lying around my painting table since the release of "Thaw Of The Lich Lord" five years ago.

"North Star Military Figures" WIPs - A White Gorilla and Tribal Warrior Archer

But, mainly due to my disappointment with the actual sculpt, I have found the 'wandering ape' quite a chore to pigment. On the surface, I thought the fang-toothed brute would prove quite a straightforward subject considering it is predominantly white with just its fleshy hands. feet, mouth and chest showing. However, a lot of the detail marvellously captured in the model's 'official paint-job' doesn't actually seem to be all that clear on the figure in front of me.

In addition, I fear I have once again succumbed to the trap of creating my own plastic miniatures by using one of "North Star Military Figures" excellent "Frostgrave" kits, as I have literally covered my Witch's tribal warriors in all manner of bracelets, pouches, hand-weapons and evil wooden face masks. All of these tiny details need 'picking out', shading and highlighting, and this is proving something of a time-consuming process for a project I initially anticipated being reasonably straightforward.

"Crooked Dice Game Design Studio" WIPs - These three FedSec Troopers just need some tidying up

Luckily, my three remaining FedSec Troopers by "Crooked Dice Game Design Studio" continue to be a lot of fun to work on. The 'dead-ringers' for Supreme Commander Servalan's Terran Federation soldiers have now had all their "Vallejo" Heavy Red gas-mask visors and Heavy Khaki trim roughly layered in place, so simply need these areas to be tidied up before each figure can be appropriately shaded with a wash or two...

"Can You Survive The Horror?"

"Nail-biting decisions. Flesh-eating zombies."

This 28mm scale 3D printed piece is available as part of the Resident Evil 2 - Board Game - 3D Wall set - Set 1 by the "Pro Tech Painting" eBay store, and has been designed to be used with the "cooperative board game" produced by "Steamforged Games". The small wall measures 40mm in width and 35mm in height, and is one of four identically-sized pieces which come as part of the overall set.

As advertised, the brick wall did require some "final cleaning before painting" with both a nail file and sharp modelling knife. It was then primed with two coats of "Vallejo" Heavy Red and subsequently shaded using a mixture of "Citadel" Agrax Earthshade and “The Army Painter” Strong Tone Quickshade. Finally, the model was heavily dry-brushed with (more) "Vallejo" Heavy Red.

"Crooked Dice Game Design Studio" WIPs - Three FedSec Troopers

With the test scenic piece completed, I have momentarily turned my attention to progressing the three remaining FedSec Troopers I have had sat upon my painting table for a few years now, and getting the black-suited soldiers at least primed with a couple of helpings of "Citadel" Abaddon Black. I actually own a few more of these excellent figures by "Crooked Dice Game Design Studio", but as they haven't yet even been based I have put them aside for a rainy day next year...

In addition, I have finally managed to assemble the metal Firebrand Warjack which comes with the Iron Star Alliance Starter Set for "Warcaster: Neo-Mechanika" by "Privateer Press". To be entirely honest, this hefty beast has been severely close to being lobbed across my hobby room on a number of occasions as it's been an incredible pain to put together, despite it containing no less than eleven pins.

"Privateer Press" WIP - The Warjack has been assembled, primed, layered, shaded and dry-brushed

The main problem has been the brute's sheer weight as it is cast entirely in metal, and as a result the suggestion its entire torso, arms, weapons and power-fins would easily be held aloft by super-glue alone is laughable. Indeed, I ended up re-pinning the Warjack's legs a couple of times after it became clear the burden was far too great for just a single piece of metal wire, some green-stuff and enough epoxy to turn me into an addict for life.

Ultimately, I have settled on a pose which takes a lot of stress off of the Firebrand's frighteningly fragile leg-joints, and placed a large portion of it onto his grounded Repulsor Shield. The overall look of the ensemble is arguably a far cry from the imposingly upright stance depicted in the 'official' Iron Star Alliance illustrations. But the miniature has so far withstood priming, layering, shading and a seriously rough 'dry-brushing' without falling apart again...