(Lead) Mountain Musings - "Partially-Painted/Printed Pledge” [II/IV] January 2026

Last month's output ranged from spacecraft to spacemen, and even a small bit of terrain

Having already completed a quarter of my latest Partially-Painted/Printed Pledge (PPPP) I thought I'd spend the next four or so weeks focusing upon a number of 28mm plastic soldiers produced by "Warlord Games" - which frankly have been gathering dust on my shelves for far too many months. The majority of these figures will be World War Two Italians, as having bought the Nottingham-based company's "Bolt Action" Third Edition rulebook, as well downloaded their Italy Army List [dated September 2024], I thought I might finally finish a force of Benito Mussolini's fascists I've previously assembled, based and undercoated.

In addition, I couldn't resist recently picking up a copy of Issue 454 of "Wargames Illustrated" as it had a sprue of US Firefly Jump Infantry 'cello-taped' to its front cover. In the past I've experimented with "Konflikt '47" using my quite considerably-sized collection of "Secrets Third Reich" miniatures by "West Wind Productions". But never got on with that range's Jet Soldiers - finding the sculpts significantly smaller than the rest of my models. So thought I might try the 'official' figures for a change, and maybe even pick up half-a-dozen Axis Stahltruppen Heavy Infantry as opposition if the mood takes me.

"Warlord Games" WIPs - Three of the six US Firefly Jump Infantry I've assembled for "Konflikt '47"

I'm also eager to continue working on the brood of Zeek Scuttlers by "Artisan Guild" I have produced using "Elegoo" Water Washable Resin on my Mars 5 3D Printer. With my unit of Burrowers now finished and ready to represent a Tidal Swarm for the Trident Realm Of Neritica in "Kings Of War", I plan to get both my army's leader and a couple of basic infantry units completed 'toot sweet.'

Lastly, I haven't forgotten how badly my Napoleonic project has started floundering in recent times. I was fully expecting to have doubled the number of French skirmishers and Russian militia I could field over the past few weeks. However, disappointingly I haven't finished a single one, and now enter a year in which I had planned to solely focus upon cavalry units rather than (more) infantry. As a result I hope to get the eight outstanding soldiers finished as soon as I can, and then potentially look at only doing a handful of horsemen before plunging back to more muskets and bayonets.

"Wargames Foundry" WIPs - This Napoleonic French skirmisher is now close to competition

There can be little doubt that my productivity over the past few months has been somewhat low when compared to my output of previous years. To be fair a lot of this has been down to the sheer variety of miniatures currently available to me - something which has caused me to leap from one manufacturer to another with little rhyme or reason. The number of STL (Standard Triangle Language) files I now own in embarrassingly high and means I now spend a lot of my hobby time tinkering with my 3D printers rather than actually putting a brush-tip on a model.

Somewhat disconcertingly I don't see that changing any time soon either, as I have now started printing and painting scenery too - something I've always tried to avoid in the past. Of particular note has to be the numerous pieces of scenery I just acquired from "Saucermen Studios" via their "Beyond The Trenches Of Despair" Kickstarter. Whether it be ruined walls, trench systems, bunkers, towers or concrete barricades, I am currently slowly producing as much of this stuff as my "Bambu Lab" A1 Mini can cope with - and then I'll be moving onto another terrain project concerning various sewers, dungeons and pyramids following the success of "Death x Tiles: The Lost Temple" campaign by "Cast N Play"...

Top Ten Miniatures Of 2025 - A "Rantings From Under The Wargames Table" Viewpoint

It’s that time again folk’s, when once a year Simon lets me play fast and loose with his blog and pick what are in my opinion the ten best miniatures he has painted in 2025. Each year this gets harder to do as there is just so much good stuff to choose from. So without further ado let’s get stuck in to the real stars of the show…the miniatures.

No. 10 - Plague Lord by “Mantic Games” - November 18th

If you're only an occasional visitor to this blog you could be forgiven for thinking it’s all just 28mm stuff. But regulars will be more aware that Simon does tend to “dip his toe” into other scales as well, and a perfect example of this are these smashing 10mm scale versions of Mantic Games' “First Generation Plague Lord” figures. Now I have the 28mm version of a figure very similar to this, and I have to say my painting of that is no more detailed than this tiny rendition - truly outstanding stuff!

No. 9 - Late Line Infantry Flank Company Shouldered Arms by “Wargames Foundry” - November 10th

Simon’s continued efforts within his Napoleonic project cannot help but be admired. As something I flirted with many years back I am well aware of how taxing and soul destroying gazing upon rows and rows of intricate infantry can be, so each time another of his perfectly pigmented Napoleonic protagonists appears on his blog I have to tip my hat both to his exceeding good paintwork, and his resilience. I chose this British line infantry soldier for the Top Ten, as he sums up perfectly both the period and quality Simon has put into it.

No. 8 - Falklands British Infantry by “Pendraken Miniatures” - August 30th

More British infantry at the number eight spot too. Though this time we jump forward over a hundred years and down a scale or two, with these sublime versions of troops dispatched to the Falkland Islands during the 1982 conflict. Painting 10mm figures looks easy, but I know from experience that to get results as good as this requires a lot of skill and a steady hand to pick-out all the details - something that has been done with real aplomb here.

No. 7 - Dalek by “Black Tree Designs” - February 24th

Daleks. The scourge of the universe! Who doesn’t love a Dalek? Well basically anyone who has to paint them. It’s the domes that are the killer, and of course there are so many of them too - fifty six in fact! And they all have to be perfect. Luckily the ones on show here are as is the classic dark grey colour scheme made popular by “Genesis of the Daleks”. I have great admiration for a well painted Dalek, and Simon’s are some of the best I’ve seen.

No. 6 - Kurgun C3-A Heavy Cruiser by “Fat Dragon Games” – September 24th

Always one to cut his own path when it comes to starting a new project, Simon decided to do some “Star Trek” universe gaming, But rather than use “Official” miniatures he found some that though conveying the flavour of the original television series, were in my opinion much cooler looking! This was never more evident than in this version of a Klingon Heavy Cruiser. The ship's design is awesome, and the dark green colour scheme is both alien and menacing in equal measure. Absolute top work!

No. 5 - Gell Guard 2 by “Black Tree Designs” - January 20th

Well I was mightily impressed with the painting of this miniature (and the other two also painted about the same time) - both when they appeared for the first time, and again when I set about compiling this Top Ten. But it was when I saw the actual episodes of Doctor Who it appears in again this week on “U& Eden”, due to them re-showing "The Three Doctors" over the festive period, that I was struck by just how incredibly accurate Simon’s rendition is. Seriously 'Google it' and be amazed! I like my figures to be finished with a matt varnish, whereas Simon prefers a gloss finish and I have to say it works a treat on these guys. They could have glided straight out of the story. Beautifully done!

No. 4 - Retained Knight by "Alternative Armies" - May 30th

I’ve already mentioned my admiration for Simon’s ability to find alternatives to official figures to play games with, and perhaps my favourite version of this is his 15mm take on “Warhammer 40K” using miniatures from Alternative Armies “Ion Age” range. Figures for this project have made my Top Ten before in previous years. But this “Special Character” clad in gold with “Blood Angels” red accents was just too good to pass over this year, and has again got me perusing the “Alternative Armies” website!

No. 3 - Andre the Giant by “Hasbro” - September 4th

Though the classic era of the World Wrestling Federation “WWF” passed me by, I did of course know who all the main players were as they were pretty much household names and popular toys at the time. And it was the “toy like” appearance of this lovely figure that really spoke to me. This is hardly a surprise as he was scaled down to just (just?) 70mm tall by Simon, but still a massive figure by our standards. The painting is of course up to Simon’s normal high standards and even more impressive due to the increased height of the model. It really brings the character's oversized personality to wonderful life.

No. 2 - Korg by “CoolMiniorNot” - July 7th

If you like your superheroes  “Chibi” style then you’ve come to the right place, as there have been many super (pardon the pun) large headed versions of all your Marvel favourites appearing on this blog over the last twelve months. Indeed, it was our mutual love of all things “Superhero” that originally brought Simon, myself and our respective blogs together in the first place. Resultantly, it would just be so wrong of me not to include at least one of this genre in my Top Ten list, and it was a difficult choice too as they have all been so good. But the absolute perfection in colour palette and execution of Korg, along I admit with him being a favourite character of mine, just edged him above the rest.

No. 1 - Bat Sentry by “Wizkids” - December 12th

So we come to the top of the tree, the big kahuna as it were, and what I hear you ask could keep the beautifully painted miniatures above from the Number One spot? Well strangely enough I did put a Batmobile in my Top Ten last year. But this is on a whole new level! The Batmobile/Bat Sentry is a sort of “Transformer” that I didn’t even know existed until I read Simon's post (see you learn stuff here as well as basking in the lovely painted miniatures!). Of course I’ve waxed lyrical about his exceptional skill with black coloured miniatures before, and that is on show in spades here too, contrasting to perfection with the radiant yellow Bat symbol that fair glows upon its chest, as well as the red menacing eyes. Then add in the dark metallic’s on the joints and accents, and you have what looks like a simple black miniature, but is in fact covered in small yet important details. Like good movie music it is there but it don’t shout, just subtly enhances the whole viewing experience. Absolutely gorgeous, and a perfect example of Simon’s work, this is my number one of 2025!

************************************************************************

So there you go, ten wonderful miniatures from a blog full of wonderful miniatures, and if you follow the links some damn fine reading as well! So grab a cup (or glass) of your tipple of choice and go back to enjoy a year’s worth of great blogging. It’ll get you in the mood for all the wonder that is no doubt to come over the next twelve months. If you want to read some good writing and see some not so good miniatures, then you can check out Simon’s take of my last two years work (yes I’ve been much less prolific than him I’m afraid) here…

https://rantingsfromunderthewargamestable.wordpress.com/

All that leaves me to do is first off thank Simon once again for letting me “tend his baby” for a night. I hope I haven’t turned away too many of his followers, and of course to wish all of you out there in blog-land the very best New Year. I hope all your endeavours, be them gaming or otherwise, are as successful as you wish, and the year proves to be healthy, safe, successful and secure for us all.

Cheers Roger.

"All You Have To Do..."

 "...Is stare Death in the face!"

This 28mm scale pre-painted plastic model of Black Mask was produced by “Wizkids” and is miniature number 010 from their DC “Heroclix” Collateral Damage expansion. "Commonly depicted as a brutal and ruthless crime lord in Gotham City who has a fixation with masks", this comic book super-villain was created by Doug Moench and Tom Mandrake, and first appeared in the August 1985 issue of "Batman".

Rather unceremoniously snapped from its 'clicky' base and super-glued onto a plastic 25mm circular base, Roman Sionis was undercoated using plenty of "Citadel" Abaddon Black, before being dry-brushed with "Vallejo" Heavy Charcoal and shaded in "Citadel" Nuln Oil. I then gave his shirt and teeth a little touch of "Two Thin Coats" White Star, and a wash of heavily watered-down "Citadel" Agrax Earthshade.

"Orbiting Earth in the spaceship, I saw how beautiful our planet is."

The mass murderer's partially-destroyed metal walkway was given a lick of "Vallejo" Gunmetal, splashed with "Citadel" Nuln Oil, and dry-brushed with (more) "Vallejo" Gunmetal. As I wanted to suggest the place was falling apart, I also sporadically added some dabs of Extreme Rust Wash by "Mig Productions" to it, and semi-blended these in with (another) dry-brush of "Vallejo" Gunmetal.

I was tempted to add a little colour to the ensemble by following the miniature's original colour scheme and making the ladder red. However, this struck me as being a bit too distracting for my liking, so in the end I simply settled for pigmenting his briefcase with a combination of "Vallejo" Heavy Sienna and "Citadel" Nuln Oil.

"Saucermen Studios" WIPs - This Concrete Defence Wall is having all its details 'picked out'

Moving over to my current obsession with all things 3D printed, I've also completed a pair of 32mm Soviet Cosmonauts by "Black Site Studios". Their STL (Standard Triangle Language) file is from the company's Two-Player Digital Starter Set, and before being predominantly painted in "Two Thin Coats" Sanguine Scarlet and "Citadel" Carroburg Crimson, were both slightly upscaled by 1% due to the original sculpt appearing to be a bit more slender in its proportions than the cast resin Eastern Bloc astronauts I already own.

Lastly, I am continuing to progress a test piece of "Trench Crusade" inspired scenery which I recently produced on my "Bambu Labs" A1 Mini 3D printer. This small Concrete Defence Wall is made by "Saucermen Studios" as part of their "Beyond The Trenches Of Despair" Kickstarter, and is being used as a pilot piece for the colour scheme I plan to use for all my terrain "set in a horrifying alternate timeline of World War One."

"Batman's New Batmobile Upgrade..."

 "...Makes it more powerful than ever."

This 28mm scale pre-painted plastic model of the Bat Sentry was produced by “Wizkids” and is miniature number 097 from their DC “Heroclix” Unleashed range. Designed as a new, robotic upgrade for the Batmobile, such automated defence drones were created by Bill Finger, and actually first appeared way back in the December 1956 issue of "Batman".

Unceremoniously clipped from the figure's 'clicky' base and super-glued upon a plastic 65mm circular base, the robot was given a couple of licks of "Citadel" Abaddon Black, enthusiastically dry-brushed with "Vallejo" Heavy Charcoal and completely sploshed in "Citadel" Nuln Oil. I then applied a combination of "Vallejo" Gunmetal and "Citadel" Nuln Oil to all of the machine's metallic areas, such as its joints and the underside of Batmobile.

"Black Site Studios" WIPs - These four Soviet Cosmonauts just need some washes and tidy up

With the majority of the Bat Sentry completed, I then spent some time carefully 'picking out' the odd detail to help bring the model a little colour. Foremost of these areas was the model's eyes and chest symbol, which were pigmented in "Two Thin Coats" Skulker Yellow and a spot of "Citadel" Reikland Fleshshade. The car's headlights were simply covered in some White Star by "Two Thin Coats" and then shaded with (more) "Citadel" Nuln Oil.

Alongside my first completed "Heroclix" figure in over eighteen months, I have also found a little more time to work on the metallic areas of my latest "Lunar" painting project. These four Soviet Cosmonauts will probably be the last of the "Spectre Miniatures" 3D prints I work on for a while, as I really want to get cracking on some of the other Moon-based factions I actually own on sprues.

"Wizkids" WIPs - The Penguin, Black Canary and the Black Mask

Foremost of these will be the Chinese Taikonauts, who come armed with a rather formidable Pickhammer. As with both the Russian and NASA astronauts I've previously painted, I'm planning on initially just assembling what can be constructed from their basic boxed set before I begin buying/printing any STL (Standard Triangle Language) files to supplement my force - albeit currently, "Black Site Studios" don't have any R.O.C. Taikonauts available as digital files on their webstore.

Lastly, I've made a bit more progress on some more "Heroclix" miniatures I recently dusted down from my plastic backlog on a bit of a whim. The actual scale of the Penguin sculpt is a little off-putting to be honest, when he's compared to the much less cartoony size of the Black Mask and Black Canary. However, if such irregular proportions was a deal breaker with my wargaming obsessive-compulsive disorder then I'd never have collected/painted such a huge number of the models in the first place...

"Spurred On By A Feeling Of Manifest Destiny..."

 "...The United States was able to rally its people behind a new desire for space heroes rooted in a nation's pride."

This 32mm NASA Astronaut is produced by "Black Site Studios" for their "Lunar" skirmish game, and was created using "Elegoo" Water Washable Resin on a Mars 3 Pro 3D Printer. The STL (Standard Triangle Language) file comes as part of the company's Two-Player Digital Starter Set, but has been both 'mirrored' and quite heavily converted in order to represent an experienced fighter on the Moon's surface.

Indeed, as I plan to use this range of miniatures for "The Silver Bayonet" by "Osprey Games" - with some lunar surface homebrew amendments - I thought this model would make an excellent Veteran Hunter for my American faction, so subsequently kitted him out with some extra shoulder pads, a Markam S11 pistol and some spare oxygen tanks. All of these additional 'bitz' were taken from the remaining cast resin pieces I had left over from the aforementioned Starter Box.

"Artisan Guild" WIPs - These Zeek Scuttlers have been primed, shaded and dry-brushed

Once assembled the astronaut was super-glued onto a "Citadel" 30mm circular stand, undercoated with "Two Thin Coats" Celestial Blue, positively drowned in "Citadel" Drakenhof Nightshade, and dry-brushed with (more) "Two Thin Coats" Celestial Blue. I then applied a combination of "Vallejo" Heavy Blue and "Citadel" Drakenhof Nightshade to the piece of insulation material running along the edge of the astronaut's backpack in order to slightly break up the monotony of the spaceman's palette a little bit.

Of course at this point I realised that in 'mirroring' the STL on Chitubox I had inadvertently moved the tubing to the American's left side. However, I don't think it's terribly noticeable or distracting from the figure himself - and perhaps could be seen to denote the chap is simply left-handed..? The miniature's hand-weapons were quickly treated to a lick of Citadel "Abaddon Black", layered in "Vallejo" Gunmetal and later shaded with "Citadel" Nuln Oil.

"Wizkids" WIPs - This old "Heroclix" figure has been dusted down so its details can be 'picked out'

In addition to finishing my veteran NASA Astronaut, I have also been busy pigmenting a quartet of Zeek Scuttlers I aim to use for "Kings Of War" by "Mantic Games". These insectoids will hopefully make good proxies for the Trident Realm Of Neritica, and should prove pretty straightforward to get tabletop ready on account of their predominantly brown (with a little bit of green to represent sea algae).

I'm also very much aware that my annual Partially-Painted/Printed Pledge (PPPP) challenge is aimed at getting many of my long-forgotten, half-started projects tabletop ready, so with that in mind I've picked up an old plastic "Heroclix" Bat Sentry miniature I began working on way back in February 2020. This 75mm tall model comes from "Wizkids" DC HeroClix Unleashed expansion, and is one of the random encounters I have planned for a campaign based around Batman's main villains fighting for territory against one another in Gotham City.

"This Immensely Large Black Wolf Seems As Big As A Horse."

"It has fiery eyes, a thick coat of fur, and spikes crowning the top of its spine."

This 28mm scale Orr'ugs Wolf is produced by "Artisan Guild" and was downloaded for free as part of a multi-piece set of STL (Standard Triangle Language) files from their "Patreon" subscription service. One of four different poses, this impressive sculpt was originally 80mm from nose to tail, but has actually been reduced in scale down to 'just' 45mm in "Chitubox" Basic to see whether it would work as a Dark Wolf for "The Silver Bayonet" by "Osprey Games".  

Initially I actually 3D printed four versions of the animal, ranging from 30mm, 35mm, 40mm and 45mm for a friend, so they could see which size they wanted to fit onto a 25mm circular base. In the end they went for the 40mm miniature, whereas I liked the notion of a larger beast sitting upon a 30mm circular stand. I still have a couple more wolves from "Warlord Games" Mythic Americas range to paint - to use as Dark Wolf proxies. However, I much prefer these figures in both size and detail, so may well print out another dozen or so at some point to use instead.

"The Kingdom of Great Britain (later the United Kingdom) was the most constant of France's enemies."

Produced using "Elegoo" Water Washable Resin on a Mars 5 3D Printer, the 'wandering monster' was primed using "Citadel" Abaddon Black and dry-brushed with plenty of "Vallejo" Heavy Charcoal. It was then shaded with "Citadel" Nuln Oil, before being lightly dry-brushed with (more) "Vallejo" Heavy Charcoal. The brute's eyes, teeth and claws were patiently picked out using a little "Vallejo" Heavy Red and "Two Thin Coats" White Star, and later washed with some "Citadel" Carroburg Crimson or Agrax Earthshade as appropriate.

In addition to my horror-themed 'test piece', I have also completed a second 28mm scale metal by “Wargames Foundry". Taken from their B041 Late Line Infantry Flank Company Shouldered Arms set, the Napoleonic British soldier was predominantly pigmented using a combination of White Star by "Two Thin Coats" and "Vallejo" Heavy Red. Both of these colours were subsequently sploshed with some watered-down "Citadel" Agrax Earthshade to add a little shadow here and there.

"Knight Models" WIPs - Batman's base topper along with Peacemaker and Eagly

I also applied some "Vallejo" Heavy Bluegrey and "Citadel" Drakehnof Nightshade to the figure's water bottle, and a combination of "Vallejo" Heavy Brown and "Citadel" Agrax Earthshade to the Redcoat's bag. Lastly, I used a little "Vallejo" Neutral Grey on the miniature's blanket, and some Gold on his shako plate. These areas were then darkened down with a splash of "Citadel" Nuln Oil or Agrax Earthshade respectively.

I've also been busy working on some more of the STLs provided by "Knight Models" as part of their "Batman Miniatures Game" Gotham Lord Tribe pledge on "My Mini Factory". Some of these models come on some incredibly detailed base toppers, so currently I'm slowly working my way through one for the Dark Knight himself, along with Peacemaker and his sidekick Eagly...

"I Will Enjoy Feasting On Your Bones!"

 "Bein' a reptile man ain't pretty."

This 35mm scale miniature of Killer Croc Thug is produced by "Knight Models" for their "Batman Miniature Game", and was created using "Elegoo" Water Washable Resin on a Mars 5 3D Printer. The STL (Standard Triangle Language) file was part of the company's Gotham Lord Tribe pledge in September 2025 on "My Mini Factory", and also came with a base topper and 40mm lipped base (which was created using some "Bambu Lab" Matt White PLA (Polylactic Acid) on an A1 Mini 3D Printer).

Sculpted to depict Waylon Jones' scaly alter-ego in an intimidating, no-nonsense pose, the figure was primed using a couple of layers of White Star by "Two Thin Coats", and had his shoes, belt and braces 'picked out' with a little "Citadel" Abaddon Black. The super-villain's trousers were then given a lick of "Vallejo" Heavy Bluegrey, before being sploshed with "Citadel" Drakenhof Nightshade in an effort to make them look like faded blue jeans.

"Black Site Studio" WIPs - These three Soviet Cosmonauts just need some shades and a tidy up

Killer Croc's flesh was first base coated with some "Vallejo" Heavy Grey, and later shaded using "Citadel" Biel-Tan Green and Agrax Earthshade. His scales were subsequently carefully dry-brushed with a little (more) "Vallejo" Heavy Grey. I also took this opportunity to patiently dot all the buckles on his braces using a combination of "Vallejo" Gunmetal and "Citadel" Nuln Oil. Finally, his vest was simply 'dirtied up' with some heavily-watered down "Citadel" Agrax Earthshade.

Staying with 3D prints, I have managed to get a bit more work done on a trio of Soviet Cosmonauts recently produced using "Elegoo" Water Washable Resin on my Mars 5 3D Printer. To be honest these particular figures have taken a lot longer than anticipated after initially pigmenting them all in "Vallejo" Heavy Red, as opposed to the "Two Thin Coats" Sanguine Scarlet I used on their comrades-in-arms last year.

"Wargames Foundry" WIPs - Still quite a bit of work needed on these remaining British Grenadiers

Obviously this meant I had to repaint all three sculpts from scratch as the red hue was noticeably different from that of my other Russians. However, as my colour scheme for these communist moon men is very straightforward they shouldn't take too much longer - and as I have a handful more NASA Astronauts printed too, I'm hoping to get at least half a dozen of these "Black Site Studio" STLs tabletop ready before the end of the month.

Lastly, I'm still 'soldiering on' with a few more British Grenadiers from the "Wargames Foundry" blister B041 Late Line Infantry Flank Company Shouldered Arms. My enthusiasm for the Newark-based manufacturer's Napoleonic range has taken a little dent due to my planned trip up to their store being cancelled at the last minute by the facility experiencing electrical issues - and therefore having no lighting. I had been hoping to pick up a few more reinforcements for Wellington's Redcoats to help strengthen my resolve to get at least four of the fiddly soldiers finished. But I'll now have to wait until I make either a journey to East Stoke next year, or they hold a Christmas sale...

"The Right Stuff..?"

 "That's what they used to be called."

This 32mm resin miniature is produced by "Black Site Studios", and forms part of the Lunar Core Game pre-order I made with the American-based manufacturer just over four years ago in July 2021. However, the model is currently available as either part of the five-figure set SKU: LNR6809BSS - NASA Astronauts, or the manufacturer's Two-Player Starter Box, and was assembled using elements taken from the numerous hands, weapons and equipment pieces which came inside my old starter box.

Prior to painting, the spaceman was super-glued onto a "Citadel" 30mm circular stand, rather than one of the bases which came with the kit, and then equipped him with a large monkey wrench, as well as what I initially thought was a storage container. As I actually plan to use this range for a homebrew version of "The Silver Bayonet" by "Osprey Games", I thought I could simply paint his box white, and 'turn him' into a Doctor - and indeed, that is still my plan for the chap. But I have since seen the game's Item Card "Explosive Charge", which suggests the device he's carrying is disconcertingly meant to be a bomb.

"Black Site Studios" WIPs - These three Soviet Cosmonauts have been primed in "Vallejo" Heavy Red

The miniature was undercoated with a couple of licks of "Two Thin Coats" Celestial Blue, drenched in "Citadel" Drakenhof Nightshade, and dry-brushed with (more) "Two Thin Coats" Celestial Blue. I then applied a combination of "Vallejo" Heavy Blue and "Citadel" Drakenhof Nightshade to a piece of insulation material running along the edge of the astronaut's backpack so as to potentially break up the monotony of the rocketeer's palette a little bit. This didn't turn out half as well as I had hoped though, due to the colour's hue being a little too close to the predominant colour to stand out - especially once they'd both been sploshed with the same "Citadel" Colour Shade.

The American's hand-weapon was simply based coated with Citadel "Abaddon Black", layered in "Vallejo" Gunmetal and later washed with "Citadel" Nuln Oil. For his medical kit, I gave both the box and its straps a few applications of "Two Thin Coats" White Star, and subsequently shaded the entire area with some heavily watered down "Citadel" Agrax Earthshade. I also added a Red Cross emblem onto it so as to better mark the figure out as a medic - a task easier said than done as the decal was rather old and frustratingly came in two separate parts: the plain white circle and the red cross.

"Knight Models" WIPs - Killer Croc just needs a dry-brush and some tidying up before being finished

Perhaps unsurprisingly as I'm in something of a "Lunar" mood, I have 3D printed, based and primed three (more) Soviet Cosmonauts on my "Elegoo" Mars 5 in Water Washable Resin. I managed to pick up these STL (Standard Triangle Language) files at a reduced price in December last year, and frankly don't think much of them at all due to their being no customisation options, as well as them being somewhat smaller than the company's resin cast models.

Far more impressive have been all the "Batman Miniatures Game" figures I have received from "Knight Models" as part of my Gotham Lord Tribe on "My Mini Factory". In particular, I've really been enjoying pigmenting their Killer Croc Thug sculpt, and hope to have Waylon Jones' scale-covered alter-ego tabletop ready within the next few days...

"In The Early Anglo-Saxon Period Most Of Essex Was Covered By Forests."

"So meadow lands suitable for producing good hay were rare and valuable."

This 32mm scale model of a (medium) Anglo-Saxon Haystack was created using "Elegoo" Water Washable Resin on a Mars 5 3D Printer, and is available as an STL (Standard Triangle Language) file from the "Last Sword Miniatures" webstore. Measuring 100mm in height and approximately 75mm in width, the piece of scenery was super-glued onto a 80mm circular MDF base by "Warbases". I also drilled five holes into the base just in case there was still any uncured resin inside the hollow print, which could allow any lingering fumes to properly vent.

Unfortunately during the printing process (where I was printing two of the model on a single plate) a few of the supports failed around one of the haystack's timber legs and caused it to mis-print the bottom of it. Luckily, the rest of the sculpt turned out fine, so I was able to simply cut away the offending part with a modelling knife, and use some Green Stuff to build up the ground around it so as to cover over the gap.

"They wore fur caps, white uniform and white breeches, and short black gaiters."

The model was undercoated using a couple of licks of “Vallejo” Dark Yellow and enthusiastically drenched in “Citadel” Agrax Earthshade. It was then heavily dry-brushed with (more) “Vallejo” Dark Yellow and a little (lighter-coloured) Buff. The haystack's poles were simply given a coat of "Vallejo" Heavy Sienna, darkened down using a splash of "Citadel" Agrax Earthshade, and finally highlighted back up with (more) "Vallejo" Heavy Sienna.

In addition to my second of several planned haystacks, I have completed another Napoleonic Austrian by "Wargames Foundry". This 28mm metal sculpt is from their AN026 German Grenadiers 1805-15 Marching blister and was undercoated in "Citadel" Abaddon Black. I then applied a base layer of "Two Thin Coats" White Star to his uniform, and washed it with a little heavily watered-down "Citadel" Agrax Earthshade to bring out its details.

"Knight Models" WIPs - Killer Croc just needs his scaly hide completed

I next applied a combination of "Two Thin Coats" Celestial Blue and "Citadel" Drakenhof Nightshade to the infantryman's collar, cuffs, waist-band, helmet and turnbacks, before 'picking out' his water bottle and bayonet with some "Vallejo" Gunmetal and "Citadel" Nuln Oil. The Grenadier's sabre hilt, scabbard tip, ammunition pouch and helmet plate were simply pigmented using a little "Vallejo" Heavy Sienna, Gold and a dash of "Citadel" Agrax Earthshade. Finally, I added a smidgeon of "Two Thin Coats" Skulker Yellow and Wyvern Green to the miniature's head plume and later washed these areas with "Citadel" Reikland Fleshshade and Nuln Oil respectively.

Despite all these time-consuming details I've also made more progress on my Killer Croc Thug by "Knight Models". This "Elegoo" Water Washable Resin 3D figure has really caught my imagination, and as I'm planning on using it for my own 'homebrew' rules rather than the official "Batman Miniatures Game" - which apparently requires a phone app to play - I may well print out a couple more of the hulking bruiser for my tabletop to use as scaly minions for a 'bigger' Waylon Jones sculpt, once this one is finished...

"As The Klingons Are Portrayed As A Warrior Culture..."

"...The Empire is shown to use warships almost exclusively."

This Kurgun C3-A Heavy Cruiser was created using some "Bambu Lab" Matt White PLA (Polylactic Acid) on an A1 Mini 3D Printer, and can be purchased as an STL (Standard Triangle Language) file by "Fat Dragon Games" as part of the company's "Battlefront Valkyrie" Starter Set. The two-piece spacecraft has been printed using a 0.2mm nozzle, with a 0.1mm layer height in order to minimise any striation lines on the finished model, and measures an impressive 80mm in length.

The vessel was initially undercoated using a couple of layers of "Vallejo" Heavy Green and shaded with "Citadel" Biel-Tan Green. I then carefully dry-brushed it with (more) "Vallejo" Heavy Green, before 'picking out' its warp nacelle and (forward-facing) antimatter-based photon torpedo launcher with a combination of "Scale 75" White Alchemy and "Citadel" Flesh Tearers Red.

"The first Austrian grenadiers came into being in 1700."

Alongside the latest addition to my (not) Klingon Defence Force, I have finished two more Napoleonic Austrians by "Wargames Foundry". This pair of identical 28mm metal sculpts are from their AN026 German Grenadiers 1805-15 Marching blister and were primed using a couple of coats of "Citadel" Abaddon Black. I then applied a base layer of "Two Thin Coats" White Star to the majority of their uniforms, and weathered it with some heavily watered-down "Citadel" Agrax Earthshade. I next applied a combination of "Two Thin Coats" Celestial Blue and "Citadel" Drakenhof Nightshade to each elite infantryman's collar, cuffs, waist-band, helmet and turnbacks, before 'picking out' their water bottles and bayonets with some "Vallejo" Gunmetal and "Citadel" Nuln Oil.

The Grenadiers' sabre hilts, scabbard tips, ammunition pouches and helmet plates were simply pigmented using a little "Vallejo" Heavy Sienna, Gold and a dash of "Citadel" Agrax Earthshade. Lastly I added a smidgeon of "Two Thin Coats" Skulker Yellow and Wyvern Green to each model's head plume - in line with the colours used on the "Wargames Foundry" website. Both of these areas were later washed with "Citadel" Reikland Fleshshade and Nuln Oil respectively.

"Knight Models" WIPs - This Killer Croc Thug is being painted from the boots up

Despite so much of my spare time being taken up with using my brush-tip lately, I have still managed to continue producing a fair few models using some "Elegoo" Water Washable Resin on my Mars 5 3D Printer, and "Knight Models" recent announcement that they were going to be releasing their "Batman Miniature Game" (BMG) range as STL (Standard Triangle Language) files has only helped increase my enthusiasm for this side-hobby. Indeed, I've already gone 'all-in' on their Gotham Lord Tribe on "My Mini Factory".

As a result I've been busy using both my aforementioned Mars 5 and A1 Mini to create a number of Gotham City's darker denizens, as well as their respective bases. To begin this 'unforeseen' project, I thought I'd tackle a Killer Croc Thug from The Joker’s crew. Now, I have no intention of actually playing the BMG itself - despite being sent the rulebook, cards, counters, tokens and scenery from the "extremely competitive skirmish" game's starter set as PDFs. But I did think I could (once again) utilise "The Silver Bayonet" or "Five Parsecs From Home" rules with some homebrew additions...

"The Engineers Have A Multitude Of Different Names."

"Deciphered hieroglyphic tablets found in Tanaka 5 referred to them as Ossians."

These three 32mm scale Yurneyan Golem Exofist Mask figures are produced by "Papsikels Miniatures" and were downloaded as part of a free set of STL (Standard Triangle Language) files from their PAPSIPACK Welcome Models subscription set on "Patreon”. Produced using "Elegoo" Water Washable Resin on a Mars 3 Pro 3D Printer, I had initially planned to 'field' four of the figures. But one of the models' arms failed to print – probably due to my overloading the build plate.

The 55mm tall sculpts are recognisably inspired by Ridley Scott’s 2012 science fiction film “Prometheus” and were predominantly painted using “Duncan Rhodes' Two Thin Coats paint” range. They were all primed with a double helping of Gravestone Blue, shaded using Oblivion Black Wash and dry-brushed with (more) Gravestone Blue. This really helped bring out all the partly organic looking details of their survival suits.

"C27 Studio" WIPs - Conroy has been primed and dry-brushed

However, I thought the “Space Jockeys” looked a little bland so decided to pick out their stomachs, fingers and throats using a combination of Sir Coates Silver and Oblivion Black Wash. This somewhat tied into some of the pictures I have seen of the alien’s costumes for the movies, which appear to have a somewhat silvery/fleshy sheen to them. As a final step I applied Ivory Tusk to their heads, washed these areas with watered-down “Citadel” Carroburg Crimson, and dotted their eyes with Doom Death Black.

Alongside my latest submission to the Analogue Hobbies Painting Challenge, I have been working on a Kevin Conroy tribute sculpt by "C27 Studio". The company ordinarily create 40mm scaled miniatures which are similar in size to those found in the "Marvel Crisis Protocol" super-hero game by "Atomic Mass Games". But this particular figure of the Dark Knight from "Batman: The Animated Television Series", has been crafted at the somewhat smaller scale of 35mm - hence it's been placed on a "Citadel" 40mm circular base.

"Battlefront Miniatures" WIPs - A Panzer IV now sporting a "Vallejo" German Grey colour scheme

In addition, I have been plugging away at the remaining models by "Battlefront Miniatures" which I need so as to complete my initial 50-point strong German D-Day Defence Force for "Flames Of War". Things had been going reasonably well, with my 7.5cm Anti-Tank guns even receiving some odd spots of camouflage over their "Vallejo" Dark Yellow undercoat/wash/dry-brush as a precursor for doing something similar to a quartet of similarly-primed Panzer IV tanks.

Unfortunately for some bizarre reason though, I inexplicably decided to veer away from doing small, self-isolated batches of coloration, and instead chose to use some "Vallejo" Luftwaffe Camo Green as a guide by snaking the odd line over the first of my armoured vehicles. Before I knew it this haphazard spider's web had got completely out of hand, and my attempt to rein it all in with "Vallejo" Heavy Brown just looked like messy splodges. As a result, and in view of having my first game pencilled in for late next week, I have subsequently decided to keep this particular tank formation nice and straightforward, by sticking with "Vallejo" German Grey and some trusty "Citadel" Nuln Oil shade...

"Hope You Don't Mind, Found This In The Closet Upstairs."

"Oh, I don't need a degree to figure you out."

This 28mm tall plastic “Wizkids” model of Batman Beyond is miniature number 016 from the Batman The Animated DC "Heroclix" range, and depicts Terry McGinnis after the sixteen year-old High School student assumes the role of Batman in 2039 A.D. Mentored by an elderly Bruce Wayne, the new Dark Knight made his debut in January 1999 on the "Batman Of The Future" American animated television series.

Following the super-hero's removal from his 'clicky-base', the figure was super-glued on to a 25mm circular stand, and hastily primed using two coats of "Citadel" Abaddon Black. Initially I had planned to completely eradicate the costumed crime-fighter's pre-paint job. However, despite an extensive search I was unsuccessful in sourcing a red bat-shaped decal from anywhere, so ultimately was forced to ensure that my brush-tip carefully skirted around the miniature's original chest emblem.

Sharez Jek Android WIPs - The hevaily-armed robot has been dry-brushed and detailed

I also decided against heavily dry-brushing the model with "Vallejo" Heavy Charcoal, as I usually do these days for my predominantly black palettes, as I wanted the masked vigilante to appear as jet black as he does in the cartoon. This meant that all I needed to do to complete the miniature was to 'pick-out' his futuristic utility belt with a combination of "Citadel" Ironbreaker and Nuln Oil, and dot in the bat-suit's technologically advanced eyes with a little dab of "Vallejo" White.

Stepping away from super-heroes I have made some good progress on my five-man squad of Sharez Jek Androids by "Black Tree Design". The figures are predominantly black in colour, so I have spent some time heavily dry-brushing them in "Vallejo" Heavy Charcoal so as to 'lighten' them up a bit, and also 'picked out' the electronic eye of a pilot piece with "Citadel" Ironbreaker to see whether it looks better than them having plain white heads...

"Toon Realms" WIPs - Rookie The Elf, Rookie The Dragonlord and Rankle The Dwarf

With the recent arrival of my "Caverns Of The Frog King" order by "Lucid Eye Publications", I have suddenly found myself facing a bit of an uphill challenge with the amount of unpainted "Toon Realms" stuff I own. Resultantly, I have decided to try and focus upon a few of the range's 'older' heroes, whilst simultaneously finishing off the remaining skeletons I need to pigment for my "Dragon Rampant" Undead army.

One of the strengths of "Osprey Games" rule-set is that you can field single or reduced model units, so with that in mind I've realised a 'Men of The West' warband just featuring the likes of Rookie The Dragonlord, Pootle the Wizard, Rookie The Elf, and Rankle The Dwarf would easily provide me with a similar-costing force to Lord Rascal's evil minions...

"Beachhead" Loot 2019

"Wargames Terrain Workshop" WIPs - A Zodiac Warrior Rooster and Zodiac Warrior Goat

This past Saturday I decided to make my first trip to the Bournemouth International Centre, Dorset, in order to attend the "exciting tabletop games event" known as “Beachhead”. To be honest my expectations weren't particularly high for this show, as despite being in its fourth year, there was no Bring & Buy sale and its single hall only boasted approximately thirty industry trade stands; which is less than half the number present at "Warfare" 2018.

Fortunately however, one of the first vendors I stumbled upon was Dave Stone of "Wargames Terrain Workshop" fame and he was soon showing off his stunning "selection of warrior animals based on the Chinese Zodiac" to me. The range currently consists of ten different sculpts, with the largest model, the Zodiac Ox, quickly catching both my attention and imagination due to its formidable size and pugilistic pose.

"Batman Miniature Game" WIPs - Black Adam, Black Mask and Black Manta

Indeed, I quickly ensured Dave had one put by behind his till for me to collect later, and then spent a brief while picking up a few of his smaller pieces to tackle the giant bovine boxer in hand-to-hand combat. Ultimately, I went with a Rooster, Goat, Monkey and rabbit, and have subsequently set to work priming the plucky bird and billy goat gruff. These miniatures really are quite incredible to behold in the flesh and seem especially sturdy due to them miraculously containing a wire skeleton deep inside the resin...

"Great Escape Games" also soon caught my eye with their increasingly tempting "Dead Man's Hand" range of Wild West figures, and I have little doubt that the next time I see this characterful range I will be picking up a few of its "Down Under" and "The Curse Of Dead Man's Hand" miniatures. On this occasion though I was able to resist due to succumbing to a quite reasonable sale of old "Knight Models" at a nearby stall.

Pre-painted "Heroclix" - This second-hand box contains Spiders Man, Dark Deadpool and Montana

I actually own a fair few sculpts for The "Batman Miniature Game", yet quite quickly fell 'out of love' with the range due the difficulty I experienced trying to assemble its fiddly metal miniatures. In addition, as I already own a vast array of "Wizkids" plastic models, it has always seemed a bit silly to invest heavily in a second set of super-hero related figures. Having said that, it was arguably impossible to resist the likes for Black Manta, Doctor Fate, Black Mask and his Crew, Hawkman, and Black Adam for just a fiver each.

Interestingly, by far my favourite 'pick' from Bournemouth actually came in the form of a birthday gift from my eldest rather than anything I bought from "Beachhead". A whopping box of "Heroclix" miniatures, including a few members of the Enforcers, usually means an evening being spent chopping figures off from their clicky-bases and readying them for a re-paint. But this time round I'm tempted to keep some of these models intact, and try to get my head around the collectible miniatures game's rule-set once again...

Top Ten Miniatures Of 2017 - A "Rantings From Under The Wargames Table" Viewpoint

Well a little later than usual (quite a bit later to be honest) Simon has asked me to share with you, his dear readers, what were in my humble opinion the “Top Ten” miniatures he painted way back in 2017. Now I know this has already been more than ably done by “Undercoat”, who stepped into the breach when I was indisposed at the tail end of last year, but Simon has been kind enough to allow me the chance to continue the fine tradition of “sticking my oar in” and inflicting my opinions upon you as well (I think he just likes getting the compliments to be honest!).

So as I sit here with my list of twenty three possible inclusions I’ll try and whittle it down to my final ten. Some may be the same as “Undercoats”, many I think will not, though it will be interesting to compare the two come the end of my list. Before I start I firstly have to congratulate Simon on his very impressive output, his work is quite simply sublime, and though we always say this it really does get harder to pick just ten every year.

No. 10 – Napoleonic French Fusilier by "Victrix Miniatures" - November 29th

Napoleonic’s are really a staple of wargaming. To the uninitiated they are probably the image that is most conjured up in the mind of what our hobby is all about - vast armies of brightly coloured figures advancing in lines across tables of green. As we all know the modern take on the hobby is very rarely like that, but that is where I started many years ago albeit with Marlborough’s wars rather than “Nappies”. Along with his Gallic chums, this figure took me right back to those heady days in a friend's back room pushing lines of troops to their black powder smoked doom, though his were nowhere as well painted as Simon's figures. Great painting skills were on show here with real character in every figure, this chap just stood out to me, I think it’s his face with his jaunty moustache.

No. 9 - Zombie Gunslinger by "Wargames Foundry" - October 28th

Another great characterful figure at number nine, this little undead cowboy is just about as “gosh tooting cute, as a horse fly on a prairie dog!”. Perhaps “cute” is the wrong word to use to describe a member of the living dead, but there is something terribly appealing about the oversized Stetson and baggy “chaps” this chap is sporting. All of Simon’s “Wild west zombies” were great but this is my definite favourite.

No. 8 - Gorgon by "Reaper Miniatures" - September 25th

It seems I always end up with a big gold animal somewhere in my list. Last time it was a “Foo dog” and this time a very impressive “Bull” construct. Standing a massive 90mm long, not including his tail, it was the painting that really drew me to this nasty looking beastie. The brass colour and oxidised highlights on this “Bones” plastic creature give it a truly realistic look that is highly impressive. Oh and it’s by Bob Olley, and that’s a good thing too!

No. 7 - Shipwreck from a "Private Collection" - September 26th

We stay in September for the figure at number seven. Now I’m not adverse to the odd “toy” based figure myself so my interest was definitely raised when I saw this smashing figure of one of the stalwarts of the “G.I. Joe” range of “Action figures”. Sadly not commercially available, Simon was lucky enough to receive this from a private collection. The wonderful paint-job Simon has given him just makes me covet him even more. I especially love the parrot perched on his shoulder.

No. 6 – Soda Machine by "Wargames Terrain Workshop" - August 7th

This was one of those “I’d never of thought of that” ideas which I fully intend to steal shamelessly at some point in the future. I’d seen the “drinks can machines” over on Dave “WTW” site and though they are very nice, they weren’t something I’d thought of adding to my “Wish List”. That is until Simon set to work turning them into rusted out pieces of set dressing brilliance! Instead of the shiny new machines gracing a corridor or “mall”, they now looked like they had been sat out in the desert for a hundred years! Perfect on any post-apocalyptic shop front or forecourt! I’ve got to get me some of these, after all what’s the worst that could happen!

No. 5 – Manphibian by "Wizkids" - June 25th

When Jez, of “Carrion Crows Buffet” fame first came up with the idea that became “Forgotten Heroes” month, we thought that maybe a couple of other bloggers might join in, so we were both shocked by the number of participants we did get and by the sheer quality of the entries too. Simon, joined in of course (like he had a choice), and his entries were up to his usual high standard, even if they did take him a little longer to finish than some of the other competitors! This conversion of a footless "Heroclix" figure into the alien member of the “Howling Commando’s” was a “kit-bashing” masterclass. Add to this the deep shimmering paintwork on his skin, and you can see why he was my pick of the bunch.

No. 4 - Sea Devils by “Warlord Games” - September 14th

The first of two “Doctor Who” related figures comes from Jon Pertwee’s tenure in the role. These highly detailed miniatures of the water born versions of the ancient Silurians have been beautifully and faithfully rendered by Simon, and are really a joy to behold. The colours are absolutely bang-on, and they could have just walked out of the sea! (Maybe that’s why they are still shiny ;-) ). Beautiful figures, beautiful painting, just a shame they are 38mm tall.

No. 3 - Damaged Dalek by “Warlord Games” - July 17th

This was another of those out of the blue, “that’s brilliant” figures. It is well known that I am not the biggest fan of “Nu Who”, but when I first saw this unfortunate little “Pepperpot” on Simon’s blog, I was struck by what a simple yet effective piece it was. To think that it was only created because the miniature would not go together properly and so was irrevocably damaged. Yet rather than throw it out, he recycled it into this wonderful objective maker. You can tell I really like this piece as I really want to do something similar myself at some point.

No. 2 - Batman by "Knight Models" - June 17th

He had to get in to my top ten and very, very nearly made the top spot. Adam West’s portrayal of the caped crusader may not of been completely true to the original, and is a million miles away from the dark brooding hero we’ve come to know today. But is there really anyone out there who doesn’t have a soft spot for these “camp”, “psychedelic” exploits from our youth. Simon's figure is a fitting tribute to the great mister West, who we sadly lost that year, with colour choices that are as always spot on, and a deftness of touch that brings the wonderful likeness to life.

No. 1 - Mad Max Interceptor by “The Honourable Lead Boiler Suit Company” - January 26th

So if Batman is only in second spot, who made it to the top of the pile?  Well it’s not a who but a what. When Simon first put forward his idea of using a world war one armoured car as the purveyance of choice of mister Max Rockatansky, I have to admit to being a little doubtful (actually I thought “Ok, this time he’s gone too far!”). But I was completely wrong on this, as the finished article just works so well! Though the painting is as good as ever with the black (he does black so well), and rust application being seamless, (it does look like it’s been out in the desert for years), the thing that pushed this to the top spot for me was the concept and vision behind this piece. I absolutely love the way Simon drags items from different settings and makes them work in his post-apocalyptic world. Great work all round!

So that was my Top Ten for 2017, as usual mentions have to be given to the “almost” boys who made the short list but didn’t quite make the final ten, so “nod’s” have to be given to… The Fisher King, Karanak, Slambo, Zygons and Torquemada to name just a few. There are of course many others...

I’ll have to start work on this year’s offerings soon as Simon is a rather prolific poster there are always plenty to work back through. It just leaves me to thank Simon for once again allowing me free rain upon his excellent blog (even if I am late doing this), please keep reading it as the content will return to the normally high level you are used to, as soon as Simon starts writing it himself again.

Many thanks for reading, cheers Roger.