Jump to content

SpaceX Raptor

From Wikipedia, the free encyclopedia

SpaceX Raptor
A Raptor 1 rocket engine ready for transport outside SpaceX's factory in Hawthorne, California
Country of originUnited States
ManufacturerSpaceX
Associated LVSpaceX Starship
StatusIn production
Liquid-fuel engine
PropellantLOX / CH4
Mixture ratio3.6 (78% O2, 22% CH4)[1][2]
CycleFull-flow staged combustion
Pumps2 turbopumps
Configuration
Chamber1
Nozzle ratio34.34:1 (booster engine)[1]
Performance
Thrust
  • Raptor 1:
  • 185 tf (1,814 kN; 407,900 lbf)[3]
  • Raptor 2:
  • 230 tf (2,256 kN; 507,100 lbf) (sea-level)
  • 258 tf (2,530 kN; 568,800 lbf) (vacuum)[4]
  • Raptor 3:
  • 250 tf (2,452 kN; 551,200 lbf) (sea-level)
  • 275 tf (2,697 kN; 606,300 lbf) (vacuum)[4]
Thrust-to-weight ratio
  • Raptor 1: 88.94
  • Raptor 2: 141.1
  • Raptor 3: 163.9
[a][5][4]
Chamber pressure3,669.5 psi (253.00 bar) (booster engine, 2019)[1]
Burn timeVaries
Dimensions
Length3.1 m (10 ft)[6]
Diameter1.3 m (4 ft 3 in)[6]
Dry mass
  • Raptor 1: 2,080 kg (4,590 lb)
  • Raptor 2: 1,630 kg (3,590 lb)
  • Raptor 3: 1,525 kg (3,362 lb)

Raptor is a family of rocket engines developed and manufactured by SpaceX. It was the first full-flow staged combustion engine to power a vehicle in flight, on the Starhopper test vehicle in July 2019.[6][7] The engine is powered by cryogenic liquid methane and liquid oxygen, a combination known as methalox.

SpaceX's super-heavy-lift rocket Starship uses Raptor engines in its Super Heavy booster and in the Starship second stage.[8] Starship missions include lifting payloads to Earth orbit and is also planned for missions to the Moon and Mars.[9] The engines are designed to be reusable.[6]

Design

[edit]

Raptor is designed for extreme reliability, aiming to support the airline-level safety required by the point-to-point Earth transportation market.[10] Gwynne Shotwell claimed that Raptor would be able to deliver "long life... and more benign turbine environments".[11][12]

Full-flow staged combustion

[edit]
Simplified full-flow staged combustion rocket diagram

Raptor is powered by subcooled liquid methane and subcooled liquid oxygen in a full-flow staged combustion cycle. This type of combustion is a twin-shaft staged combustion cycle that uses both oxidizer-rich and fuel-rich preburners. The cycle allows for the full flow of both propellants through the turbines without dumping any unburnt propellant overboard.

Full-flow staged combustion is a departure from the more traditional "open-cycle" gas generator system and LOX/kerosene propellants used by its predecessor Merlin.[13] Before Raptor, no full-flow staged combustion engine had ever been used inflight and only two designs had progressed sufficiently to reach test stands: the Soviet RD-270 project in the 1960s, a full-scale test engine and the Aerojet Rocketdyne Integrated Powerhead Demonstrator in the mid-2000s, which only demonstrated the powerhead.[14][15][12][16] RS-25 engines (first used on the Space Shuttle) used a simpler form of staged combustion cycle.[17] Several Russian rocket engines, including the RD-180[13] and the RD-191 did as well.[12]

Full-flow staged combustion has the advantage that the energy produced by the preburners, and used to power the propellant pumps, is spread among the entire fuel flow, meaning that the preburner exhaust driving the propellant turbopumps is as cool as possible, even cooler than other closed engine cycles that only preburn one propellant. This contributes to a long engine life. In contrast, an open-cycle engine in which the preburner exhaust bypasses the main combustion chamber tries to minimize the amount of propellant fed through the preburner, which is achieved by operating the turbine at its maximum survivable temperature.

Raptor 2 rocket engine cycle diagram with estimates from open-source information and analysis

An oxygen-rich turbine powers an oxygen turbopump, and a fuel-rich turbine powers a methane turbopump. Both oxidizer and fuel streams are converted completely to the gas phase before they enter the combustion chamber.[15] Raptor uses a spark ignition system instead of the consumable TEA-TEB hypergolic igniter used by Merlin, which in principle allows many restarts.[12]

Propellants

[edit]

Raptor is designed to use subcooled cryogenic methane and oxygen. Chilling the propellants below their boiling points increases their density by about 10 to 12 percent, so more propellant fits in the same tank volume.[18] Subcooling also improves specific impulse and thrust and reduces the risk of cavitation in the turbopumps.[12] The oxidizer to fuel mass ratio of the engine is approximately 3.6 to 1.[2] Methalox burns relatively cleanly, reducing carbon build-up in the engine.[19]

Liquid methane and oxygen propellants have been adopted by other companies, such as Blue Origin with its BE-4 engine,[20] as well as Chinese startup Space Epoch's Longyun-70.[21]

Manufacturing and materials

[edit]

The 2016 subscale development engine had 40% (by mass) of its parts manufactured by 3D printing.[12]

History

[edit]
SpaceX's Merlin engine (left) compared to a sea-level Raptor 1 engine (right)

Conception

[edit]

SpaceX's Merlin engines use an RP-1 and liquid oxygen ("kerolox") combination.[13] In 2016, Raptor was expected to be up to about three times as powerful as the Merlin engines that power the Falcon 9 and Falcon Heavy launch vehicles.[22]

In October 2012, Musk said SpaceX's planned new rocket, which he called MCT, would be "several times" as powerful as the Merlin 1 series and would not use Merlin's RP-1 fuel.[23]

Development

[edit]

In November 2012, SpaceX founder and CEO Elon Musk announced that SpaceX was working on methane-fueled rocket engines, that Raptor would be methane-based,[19] and that methane would fuel Mars colonization.[16] Because of the presence of underground water and carbon dioxide in Mars atmosphere, methane, a simple hydrocarbon, could be synthesized on Mars using the Sabatier reaction.[19][24] NASA has sought technologies for in-situ resource utilization that would process Martian atmospheric gases into products such as propellants.[25]

In early 2014 SpaceX confirmed that Raptor would be used for both first and second stages of its next rocket. This held as the design evolved from the Mars Colonial Transporter[16] to the Interplanetary Transport System,[26] the Big Falcon Rocket, and ultimately, Starship.[10]

The concept evolved from a family of Raptor-designated rocket engines (2012)[19] to focus on the full-size Raptor engine (2014).[27]

The first version was intended to operate at a chamber pressure of 250 bars (25 MPa; 3,600 psi).[18] In April 2024, Musk shared the performance achieved by SpaceX with the Raptor 1 engine (sea level 185 tf, RVac 200 tf) and Raptor 2 engine (sea level 230 tf, RVac 258 tf) along with the target specifications for the upcoming Raptor 3 (sea level 280 tf, RVac 306 tf)[28][29] and said SpaceX would aim to ultimately achieve over 330 tonnes of thrust on the sea-level booster engines.[29]

Raptor 1 and 2 engines were fitted with individual protective shrouds, while Raptor 3 integrates its sensors and controllers inside the engine's thermal protection, eliminating the need for individual engine shrouds.[4]

Testing

[edit]
Testing of the Raptor 's oxygen preburner at Stennis Space Center in 2015
First test firing of a Raptor development engine on 25 September 2016 in McGregor, Texas

Initial development testing[30] of Raptor components was done at NASA's Stennis Space Center,[9] beginning in April 2014. Testing focused on startup and shutdown procedures, as well as hardware characterization and verification.[12]

SpaceX began testing injectors in 2014 and tested an oxygen preburner in 2015. 76 hot-fire tests of the preburner, totaling some 400 seconds of test time, were executed from April–August.[30]

By early 2016, SpaceX had constructed an engine test stand at their McGregor test site in central Texas for Raptor testing.[12][9] The first Raptor was manufactured at the SpaceX Hawthorne facility in California. By August 2016 it was shipped to McGregor for development testing.[22] It was the first-ever full-flow staged combustion methalox engine to reach a test stand.[12]

A subscale development engine with a thrust of about 1 meganewton (220,000 lbf) was used for design validation.[12] The test engine operated at a chamber pressure of 200 bars (20 MPa; 2,900 psi).[18] Its first firing, on a ground test stand in McGregor in late September 2016, lasted about nine seconds. The development engine's nozzle expansion ratio was limited to 150, the maximum possible within Earth's atmosphere.[12]

By September 2017, the subscale engine had completed 1200 seconds of firings across 42 tests.[18][24]

SpaceX completed many static fire tests on a vehicle using Raptor 2s, including a 31-engine full-duration static fire of Booster 7 in February 2023.[31]

SpaceX completed its first integrated flight test of Starship on 20 April 2023. The rocket had 33 Raptor 2 engines, but three of those were shut down before the rocket lifted off from the launch mount.[32] The flight test was terminated after climbing to an altitude of ~39 km over the Gulf of Mexico. Multiple engines were out before the flight termination system (FTS) destroyed the booster and ship.[33]

On the second integrated flight test, all 33 booster engines completed the full-duration ascent burn. All but three were then shut down for hot-staging, during which all six Starship engines ignited.[34] The ship's six engines were commanded to shut down before the ascent burn was complete, followed by activation of the flight termination system.[35]

On the third integrated flight test, all 33 booster engines completed the ascent burn.[36] Following hot-staging, 13 engines relit for boostback, but six shut down early.[37] Seven engines were commanded to start for the landing burn, of which two reached mainstage ignition. Contact with the booster was lost at about 462 metres above the Gulf of Mexico.[37] The ship successfully kept all 6 engines lit until second stage / secondary engine cutoff without issues, however a planned in-space Raptor re-light was cancelled due to rolling during coast.[36]

The seventh flight test featured the first reflown Raptor engine,[38] which was successfully flown during Super Heavy Booster 14's ascent burn and was recovered after its successful catch by the launch tower. Booster 14 flew again on Starship's ninth test flight, the first reflight of a Super Heavy booster.[39]

Starship

[edit]

Original configuration

[edit]
Big Falcon Rocket during ascent (artist's concept)

In September 2016, Raptor was projected to power the proposed Interplanetary Transport System (ITS), in the early 2020s.[12] Musk discussed two engines: a sea-level variant (expansion ratio 40:1) with thrust of 3,050 kN (690,000 lbf) at sea level for the first stage/booster, and a vacuum variant (expansion ratio 200:1) with thrust of 3,500 kN (790,000 lbf) in space.[40] 42 sea-level engines were envisioned in the high-level design of the first stage.[12]

Three gimbaling sea-level Raptor engines would be used for landing the second stage. Six additional, non-gimbaling vacuum-optimized Raptor Vacuum engines would provide primary thrust for the second stage, for a total of nine engines.[41][12] Raptor Vacuums were envisioned to contribute a specific impulse of 382 s (3,750 m/s), using a nozzle extension.[40]

In September 2017 Musk said that a smaller Raptor engine—with slightly over half as much thrust as the previous designs—would be used on the next-generation rocket, a 9 m (30 ft)-diameter launch vehicle termed Big Falcon Rocket (BFR) and later renamed Starship.[10][42] SpaceX said the smaller design was how it planned to pay for the system: one vehicle would replace Falcon 9, Falcon Heavy and Dragon, so the resources spent on them could go to BFR.[18] With the much smaller launch vehicle, fewer Raptor engines would be needed. BFR was then slated to have 31 Raptors on the first stage and 6 on the second stage.[43][24]

In the September 2017 presentation, Musk said the sea-level engines would have a specific impulse of about 330 s (3,200 m/s) at sea level and the upper-stage vacuum engine about 375 s (3,680 m/s).[18]

Musk has said each engine needs to be capable of flying up to 1,000 times.[14]

Starship SN20 has its tiles inspected

Proposed Falcon 9 upper stage

[edit]

In January 2016, the United States Air Force (USAF) awarded a US$33.6 million development contract to SpaceX to develop a Raptor prototype for use on the upper stage of the Falcon 9 and Falcon Heavy. The contract required double-matching funding by SpaceX of at least US$67.3 million.[44] Work was to be performed at NASA's Stennis Space Center in Mississippi, Hawthorne and Los Angeles Air Force Base.[44][45] The USAF contract called for a single prototype engine and ground tests.[44]

In October 2017 USAF awarded a US$40.8 million modification contract for a Raptor prototype for the Evolved Expendable Launch Vehicle program.[46] It was to use liquid methane and liquid oxygen propellants, a full-flow staged combustion cycle, and be reusable.[45]

Production

[edit]

In 2021, SpaceX began building a second Raptor factory at its McGregor rocket development and test facility in central Texas, to produce the main stock of Raptor 2 engines while the Hawthorne factory in California focused on Raptor Vacuum and new design evolutions. The factory's framework was being assembled by October 2021.[47]

Versions

[edit]

Raptor has evolved significantly since it was revealed.

SpaceX sea-level Raptor variants (August 2024 figures, except Raptor 3 thrust and thrust-to-weight ratio)[5]
Version Mass (kg) Thrust, sea level (tf) Specific
impulse (s)
Engine only TWR
Raptor 1 2080 185 350 89
Raptor 2 1630 230 347 141
Raptor 3 1525 250[4] — 164

Raptor Vacuum

[edit]

Raptor Vacuum (RVac) is a variant with a much larger nozzle that improves efficiency in space. The first Raptor Vacuum was test-fired at McGregor in September 2020.[48] The first in-flight ignition of a Raptor Vacuum was on S25 during the second integrated flight test.[34]

Raptor 2

[edit]
A NASA employee standing between two Raptor 2 vacuum-optimized engines (background) and a Raptor 2 sea-level (foreground).

Raptor 2 is a complete redesign of the Raptor 1 engine.[49] The turbomachinery, chamber, nozzle, and electronics were redesigned. Many flanges were converted to welds, while other parts were deleted.[49] Simplifications continued after production began. On 10 February 2022, Musk showed Raptor 2 capabilities and design improvements.[49]

By January 2022, Raptor 2 had started production.[3] By November 2022, SpaceX produced more than one Raptor a day and had created a stockpile for future launches.[50] Raptor 2s are produced at SpaceX's McGregor engine development facility.[47]

Raptor 2s were achieving 230 tf (510,000 lbf) of thrust consistently by February 2022. Musk indicated that production costs were approximately half that of Raptor 1.[49]

Raptor 3

[edit]

SpaceX aims for later versions of Raptor 3 to ultimately exceed 330 tf (3.2 MN) of thrust in the booster/sea-level configuration.[29] In April 2024, SpaceX's stated target for Raptor 3 was 280 tf (2,700 kN) at sea level.[28][29] In its May 2026 Starship V3 update, SpaceX stated that the flight engines produce 250 tf (2,500 kN; 550,000 lbf) at sea level (up from 230 tf for Raptor 2) and 275 tf (2,700 kN; 610,000 lbf) for the vacuum variant (up from 258 tf), with the sea-level engine mass reduced to 1,525 kg (3,362 lb) from 1630 kg; SpaceX said simplification of the engine and vehicle-side hardware saves about one tonne per engine at vehicle level, and that all variants use a redesigned ignition system.[4]

The main goal of Raptor 3 was to eliminate protective engine shrouds by moving the majority of the plumbing and sensors into the engine's main structure,[28][29] taking advantage of the already present regenerative cooling. In August 2024, SpaceX released pictures and specifications of Raptor 3, and the engine was test-fired at McGregor.[5]

On 22 May 2026, Flight 12, the first flight of Starship V3, was also the first flight of Raptor 3.[51] One of the booster's 33 Raptor 3 engines shut down about 1 minute 42 seconds into ascent; after stage separation several engines failed to relight for the boostback burn, which ended early, and the booster made a hard splashdown in the Gulf of Mexico. One of the ship's three Raptor Vacuum engines also shut down during ascent, but the ship reached its planned trajectory.[51][52][53] The resulting mishap investigation, closed in July 2026, found the most likely causes of the booster's failed return were heat effects on engine components during ascent and erroneous engine alarm system settings.[54]

On 24 July 2026, Flight 13 kept all 33 booster Raptor 3 engines running through ascent and completed the high-thrust portion of the boostback burn on all 33 engines for the first time with a V3 booster, but ended the burn early. Only a subset relit for the landing burn, and the booster made a hard splashdown. The ship relit a single Raptor in space and performed a landing burn with all three sea-level engines before a soft splashdown in the Indian Ocean.[55][54]

On 28 September 2026, Flight 14 became the first Starship flight to reach orbit. One booster engine shut down during ascent, 31 of 33 relit for boostback and 11 of 13 for the landing burn. A Raptor Vacuum engine on the ship shut down early during ascent, which the remaining five engines compensated for by burning longer; a single sea-level Raptor was then relit for the orbit-insertion burn.[56][57]

Raptor 4

[edit]

Musk has described a further version, Raptor 4. In November 2025 he wrote that it "should beat Merlin by >10X in $/ton of thrust, with further improvement in TWR and ISP".[58] In October 2026 he said Raptor 4 was expected to produce 300 tf (2,900 kN) of thrust at sea level at roughly the same mass as Raptor 3.[59] In November 2026 he wrote that it was "so tempting" to build a 500 tf (4,900 kN) Raptor 4 to replace the 250-tonne Raptor 3 engines in the outer ring of the Super Heavy booster.[60]

LEET

[edit]

In October 2021, SpaceX initiated an effort to develop a conceptual design for a new rocket engine with the goal of keeping cost below US$1,000 per ton of thrust. The project was called the 1337 engine, to be pronounced "LEET" (after a coding meme).[50]

Although the initial design effort was halted in late 2021, the project helped define an ideal engine, and likely generated ideas that were incorporated into Raptor 3. Musk stated then that "We can't make life multiplanetary with Raptor, as it is way too expensive, but Raptor is needed to tide us over until 1337 is ready."[50]

Comparison to other engines

[edit]
Engine Rockets Thrust Specific impulse,
vacuum
Thrust-to-
weight ratio
Propellant Cycle
Raptor 3 sea-level Super Heavy, Starship 2,452 kN (551,000 lbf)[4] — 164 LCH
4
/ LOX

(subcooled)

Full-flow staged combustion
Raptor 3 vacuum Starship 2,697 kN (606,000 lbf)[4] —
Merlin 1D sea-level Falcon booster stage 914 kN (205,000 lbf)[61] RP-1 / LOX

(subcooled)

Gas generator
Merlin 1D vacuum Falcon upper stage 934 kN (210,000 lbf)[61] 348 s (3,410 m/s)[61]
Blue Origin BE-4 New Glenn, Vulcan 2,400 kN (550,000 lbf)[20] LCH
4
/ LOX
Oxidizer-rich staged combustion
Energomash RD-170/171M Energia, Zenit, Soyuz-5 7,904 kN (1,777,000 lbf)[62] 337.2 s (3,307 m/s)[62] 79.57[62] RP-1 / LOX
Energomash RD-180 Atlas III, Atlas V 4,152 kN (933,000 lbf)[63] 338 s (3,310 m/s)[63] 78.44[63]
Energomash RD-191/181 Angara, Antares 2,090 kN (470,000 lbf)[64] 337.5 s (3,310 m/s)[64] 89[64]
Kuznetsov NK-33 N1, Soyuz-2-1v 1,638 kN (368,000 lbf)[65] 331 s (3,250 m/s)[65] 136.66[65]
Rocketdyne RS-25 Space Shuttle, SLS 2,280 kN (510,000 lbf)[66] 453 s (4,440 m/s)[66] 73[66] LH2 / LOX Fuel-rich staged combustion
Aerojet Rocketdyne RS-68 Delta IV 3,312 kN (745,000 lbf)[67] 420 s (4,100 m/s)[67] 51[67] LH2 / LOX Gas generator
Rocketdyne F-1 Saturn V 7,740 kN (1,740,000 lbf) 304 s (2,980 m/s)[68] 94[68] RP-1 / LOX Gas generator

See also

[edit]

Notes

[edit]
  1. ↑ Sea-level thrust divided by engine-only mass: 185 t / 2,080 kg, 230 t / 1,630 kg and 250 t / 1,525 kg.

References

[edit]
  1. 1 2 3 Sierra Engineering & Software, Inc. (18 June 2019). "Exhaust Plume Calculations for SpaceX Raptor Booster Engine" (PDF). p. 1. Archived (PDF) from the original on 20 October 2021. Retrieved 17 September 2021. The nominal operating condition for the Raptor engine is an injector face stagnation pressure (Pc) of 3669.5 psia and a somewhat fuel-rich engine O/F mixture ratio (MR) of 3.60. The current analysis was performed for the 100% nominal engine operating pressure (Pc=3669.5 psia) and an engine MR of 3.60.
  2. 1 2 Space Exploration Technologies Corp. (17 September 2021). "Draft Programmatic Environmental Assessment for the SpaceX Starship/Super Heavy Launch Vehicle Program at the SpaceX Boca Chica Launch Site in Cameron County, Texas" (PDF). faa.gov. FAA Office of Commercial Space Transportation. p. 12. Archived (PDF) from the original on 17 September 2021. Retrieved 17 September 2021. Super Heavy is expected to be equipped with up to 37 Raptor engines, and Starship will employ up to six Raptor engines. The Raptor engine is powered by liquid oxygen (LOX) and liquid methane (LCH4) in a 3.6:1 mass ratio, respectively.
  3. 1 2 Bergin, Chris (23 January 2022). "Raptor 2 testing at full throttle on the SpaceX McGregor test stands". NASASpaceFlight.com. Retrieved 22 March 2022.
  4. 1 2 3 4 5 6 7 8 "Introducing Starship V3". SpaceX. 12 May 2026. Retrieved 20 October 2026.{{cite web}}: CS1 maint: url-status (link)
  5. 1 2 3 Weber, Ryan (9 August 2024). "Flight 5 and 6 Preparations Underway as SpaceX reveals Raptor 3". NASASpaceFlight.com. Retrieved 16 November 2026.
  6. 1 2 3 4 "Starship : Official SpaceX Starship Page". SpaceX. Archived from the original on 22 May 2020. Retrieved 24 May 2020.
  7. ↑ Berger, Eric (26 July 2019). "SpaceX's Starship prototype has taken flight for the first time". Ars Technica. Retrieved 20 October 2026.
  8. ↑ "Starship Users Guide, Revision 1.0, March 2020" (PDF). SpaceX/files. SpaceX. March 2020. Archived from the original (PDF) on 2 April 2020. Retrieved 18 May 2020. SpaceX's Starship system represents a fully reusable transportation system designed to service Earth orbit needs as well as missions to the Moon and Mars. This two-stage vehicle — composed of the Super Heavy rocket (booster) and Starship (spacecraft)
  9. 1 2 3 Leone, Dan (25 October 2013). "SpaceX Could Begin Testing Methane-fueled Engine at Stennis Next Year". Space News. Retrieved 26 October 2013.{{cite news}}: CS1 maint: deprecated archival service (link)
  10. 1 2 3 Foust, Jeff (15 October 2017). "Musk offers more technical details on BFR system". SpaceNews. Retrieved 15 October 2017. [initial flight testing will be with] a full-scale ship doing short hops of a few hundred kilometers altitude and lateral distance ... fairly easy on the vehicle, as no heat shield is needed, we can have a large amount of reserve propellant and don't need the high area ratio, deep space Raptor engines. ... 'The engine thrust dropped roughly in proportion to the vehicle mass reduction from the first IAC talk,' Musk wrote when asked about that reduction in thrust. The reduction in thrust also allows for the use of multiple engines, giving the vehicle an engine-out capability for landings. ... Musk was optimistic about scaling up the Raptor engine from its current developmental model to the full-scale one. 'Thrust scaling is the easy part. Very simple to scale the dev Raptor to 170 tons,' he wrote. 'The flight engine design is much lighter and tighter, and is extremely focused on reliability.' He added the goal is to achieve 'passenger airline levels of safety' with the engine, required if the vehicle is to serve point-to-point transportation markets.{{cite news}}: CS1 maint: deprecated archival service (link)
  11. ↑ Shotwell, Gwynne (17 March 2015). "Statement of Gwynne Shotwell, President & Chief Operating Officer, Space Exploration Technologies Corp. (SpaceX)" (PDF). Congressional testimony. US House of Representatives, Committee on Armed Service Subcommittee on Strategic Forces. pp. 14–15. Archived (PDF) from the original on 28 January 2016. Retrieved 11 January 2016. SpaceX has already begun self-funded development and testing on our next-generation Raptor engine. ... Raptor development ... will not require external development funds related to this engine.
  12. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Belluscio, Alejandro G. (3 October 2016). "ITS Propulsion – The evolution of the SpaceX Raptor engine". NASASpaceFlight.com. Archived from the original on 26 January 2021. Retrieved 3 October 2016.
  13. 1 2 3 Todd, David (22 November 2012). "SpaceX's Mars rocket to be methane-fuelled". Flightglobal. Archived from the original on 30 October 2013. Retrieved 5 December 2012. Musk said Lox and methane would be SpaceX's propellants of choice on a mission to Mars, which has long been his stated goal. SpaceX's initial work will be to build a Lox/methane rocket for a future upper stage, codenamed Raptor. The design of this engine would be a departure from the "open cycle" gas generator system that the current Merlin 1 engine series uses. Instead, the new rocket engine would use a much more efficient "staged combustion" cycle that many Russian rocket engines use.
  14. 1 2 O'Callaghan, Jonathan (31 July 2019). "The wild physics of Elon Musk's methane-guzzling super-rocket". Wired. Archived from the original on 22 February 2021. Retrieved 5 September 2019.
  15. 1 2 Nardi, Tom (13 February 2019). "The "impossible" tech behind SpaceX's new engine". Hackaday. Archived from the original on 4 February 2021. Retrieved 15 February 2019.
  16. 1 2 3 Belluscio, Alejandro G. (7 March 2014). "SpaceX advances drive for Mars rocket via Raptor power". NASAspaceflight.com. Archived from the original on 11 September 2015. Retrieved 7 March 2014.
  17. ↑ "Space Shuttle Main Engines". NASA. Archived from the original on 10 December 2015. Retrieved 6 March 2013.
  18. 1 2 3 4 5 6 Musk, Elon (28 September 2017). "Making Life Multiplanetary (abridged transcript)" (PDF). SpaceX. Archived from the original (PDF) on 14 January 2018. Retrieved 16 November 2026.
  19. 1 2 3 4 Todd, David (20 November 2012). "Musk goes for methane-burning reusable rockets as step to colonise Mars". FlightGlobal Hyperbola. Archived from the original on 11 June 2016. Retrieved 4 November 2015. "We are going to do methane." Musk announced as he described his future plans for reusable launch vehicles including those designed to take astronauts to Mars within 15 years, "The energy cost of methane is the lowest and it has a slight Isp (Specific Impulse) advantage over Kerosene," said Musk adding, "And it does not have the pain in the ass factor that hydrogen has".
  20. 1 2 Ferster, Warren (17 September 2014). "ULA To Invest in Blue Origin Engine as RD-180 Replacement". Space News. Retrieved 19 September 2014.{{cite news}}: CS1 maint: deprecated archival service (link)
  21. ↑ Jones, Andrew (19 January 2023). "Chinese startups conduct hot fire tests for mini version of SpaceX's Starship". SpaceNews. Archived from the original on 23 February 2024. Retrieved 31 August 2023.
  22. 1 2 Berger, Eric (10 August 2016). "SpaceX has shipped its Mars engine to Texas for tests". Ars Technica. Archived from the original on 18 August 2016. Retrieved 17 August 2016.
  23. ↑ Rosenberg, Zach (15 October 2012). "SpaceX aims big with massive new rocket". Flightglobal. Archived from the original on 18 October 2012. Retrieved 17 October 2012.
  24. 1 2 3 Gaynor, Phillip (9 August 2018). "The Evolution of the Big Falcon Rocket". NASASpaceFlight.com. Archived from the original on 17 August 2018. Retrieved 17 August 2018.
  25. ↑ mmooney (8 November 2015). "In-Situ Resource Utilization – Mars Atmosphere/Gas Chemical Processing". NASA SBIR/STTR. NASA. Archived from the original on 18 June 2016. Retrieved 2 June 2015.
  26. ↑ Foust, Jeff (27 September 2016). "SpaceX's Mars plans call for massive 42-engine reusable rocket". SpaceNews. Archived from the original on 18 September 2021. Retrieved 7 April 2018. Musk stated it's possible that the first spaceship would be ready for tests in four years... 'We're kind of being intentionally fuzzy about the timeline,' he said. 'We're going to try and make as much progress as we can with a very constrained budget.'
  27. ↑ Gwynne Shotwell (21 March 2014). Broadcast 2212: Special Edition, interview with Gwynne Shotwell (audio file). The Space Show. Event occurs at 21:25–22:10. 2212. Archived from the original (mp3) on 22 March 2014. Retrieved 22 March 2014. our focus is the full Raptor size.
  28. 1 2 3 Berger, Eric (8 April 2024). "Elon Musk just gave another Mars speech; this time the vision seems tangible". Ars Technica. Retrieved 16 April 2024.
  29. 1 2 3 4 5 Foust, Jeff (6 April 2024). "Musk outlines plans to increase Starship launch rate and performance". SpaceNews. Retrieved 16 April 2024.
  30. 1 2 "NASA-SpaceX testing partnership going strong" (PDF). Lagniappe, John C. Stennis Space Center. NASA. September 2015. Archived (PDF) from the original on 31 December 2015. Retrieved 10 January 2016. this project is strictly private industry development for commercial use
  31. ↑ Bergin, Chris (9 February 2023). "Starship program conducts major test, firing 31 of 33 Super Heavy engines". NASASpaceFlight.com. Retrieved 16 November 2026.
  32. ↑ Klotz, Irene (1 May 2023). "Engine Issue Felled SpaceX First Super Heavy". Aviation Week. Retrieved 16 November 2026.
  33. ↑ "Starship Flight Test". SpaceX. 20 April 2023. Retrieved 16 November 2026.
  34. 1 2 "Starship's Second Flight Test". 21 November 2023. Archived from the original on 21 November 2023. Retrieved 21 November 2023.
  35. ↑ Berger, Eric (26 February 2024). "SpaceX discloses cause of Starship anomalies as it clears an FAA hurdle". Ars Technica. Retrieved 8 November 2026.
  36. 1 2 "Starship's Third Flight Test". SpaceX.com. 14 March 2024. Retrieved 20 May 2024.
  37. 1 2 Berger, Eric (24 May 2024). "SpaceX sets date for next Starship flight, explains what went wrong the last time". Ars Technica. Retrieved 8 November 2026.
  38. ↑ Foust, Jeff (4 January 2025). "SpaceX to test vehicle upgrades and payload deployment on next Starship flight". SpaceNews. Retrieved 24 May 2025.
  39. ↑ "Starship's Ninth Flight Test". SpaceX – Launches. Retrieved 24 May 2025.
  40. 1 2 Musk, Elon (27 September 2016). "SpaceX IAC 2016 Announcement" (PDF). Mars Presentation. SpaceX. Archived from the original (PDF) on 28 September 2016. Retrieved 27 September 2016.
  41. ↑ Wall, Mike (27 September 2016). "SpaceX's Elon Musk Unveils Interplanetary Spaceship to Colonize Mars". Space.com. Archived from the original on 3 December 2021. Retrieved 22 May 2023.
  42. ↑ Wall, Mike (29 September 2017). "Elon Musk Wants Giant SpaceX Spaceship to Fly People to Mars by 2024". Space.com. Archived from the original on 3 June 2023. Retrieved 22 May 2023.
  43. ↑ Foust, Jeff (29 September 2017). "Musk unveils revised version of giant interplanetary launch system". SpaceNews. Retrieved 1 October 2017.{{cite news}}: CS1 maint: deprecated archival service (link)
  44. 1 2 3 "Contracts: Air Force". U.S. Department of Defense (Press release). 13 January 2016. Archived from the original on 15 January 2016. Retrieved 15 January 2016.
  45. 1 2 Gruss, Mike (13 January 2016). "Orbital ATK, SpaceX Win Air Force Propulsion Contracts". SpaceNews. Retrieved 15 January 2016.
  46. ↑ "Contracts: Air Force". U.S. Department of Defense Contracts press release. 19 October 2017. Archived from the original on 7 February 2018. Retrieved 6 February 2018. Space Exploration Technologies Corp., Hawthorne, California, has been awarded a $40,766,512 modification (P00007) for the development of the Raptor rocket propulsion system prototype for the Evolved Expendable Launch Vehicle program. Work will be performed at NASA Stennis Space Center, Mississippi; Hawthorne, California; McGregor, Texas; and Los Angeles Air Force Base, California; and is expected to be complete by April 30, 2018. Fiscal 2017 research, development, test and evaluation funds in the amount of $40,766,512 are being obligated at the time of award. The Launch Systems Enterprise Directorate, Space and Missile Systems Center, Los Angeles AFB, California, is the contracting activity (FA8811-16-9-0001).
  47. 1 2 "Ship 20 prepares for Static Fire – New Raptor 2 factory rises". NASASpaceFlight.com. 11 October 2021. Archived from the original on 16 October 2021. Retrieved 12 February 2022.
  48. ↑ Wall, Mike (25 September 2020). "SpaceX fires up in-space version of Starship's Raptor engine for 1st time (video)". Space.com. Retrieved 16 November 2026.
  49. 1 2 3 4 Mooney, Justin; Bergin, Chris (11 February 2022). "Musk outlines Starship progress towards self-sustaining Mars city". NASASpaceFlight. Archived from the original on 10 March 2022. Retrieved 12 February 2022.
  50. 1 2 3 Isaacson, Walter (12 September 2023). Elon Musk. Simon & Schuster. pp. 389–392. ISBN 978-1-9821-8128-4.
  51. 1 2 "Starship's Twelfth Flight Test". SpaceX. 22 May 2026. Retrieved 20 October 2026.
  52. ↑ Foust, Jeff (22 May 2026). "SpaceX launches first Starship V3". SpaceNews. Retrieved 20 October 2026.
  53. ↑ "FAA requires SpaceX-led mishap investigation before resumption of Starship launches". Spaceflight Now. 27 May 2026. Retrieved 20 October 2026.
  54. 1 2 "Starship Flight 13 achieves new firsts for SpaceX". NASASpaceFlight.com. July 2026. Retrieved 20 October 2026.
  55. ↑ "Starship's Thirteenth Flight Test". SpaceX. 24 July 2026. Retrieved 20 October 2026.
  56. ↑ "Starship Flight 14". SpaceX. 28 September 2026. Retrieved 20 October 2026.
  57. ↑ "Starship makes orbit, Flight 15 preps in full swing". NASASpaceFlight.com. September 2026. Retrieved 20 October 2026.
  58. ↑ Musk, Elon [@elonmusk] (3 November 2025). "Raptor 3 will probably be 2 to 4 times better than Merlin in $/ton of thrust and will exceed Merlin in thrust to weight ratio. Raptor 4 should beat Merlin by >10X in $/ton of thrust, with further improvement in TWR and ISP" (Tweet). Retrieved 17 November 2026 – via X (formerly Twitter).
  59. ↑ Klender, Joey (26 October 2026). "How SpaceX Is raising Raptor's sea-level thrust while holding engine mass steady". Teslarati. Archived from the original on 3 November 2026. Retrieved 17 November 2026.
  60. ↑ Musk, Elon [@elonmusk] (7 November 2026). "It is so tempting to make a 500 ton thrust Raptor 4 in place of the 250 ton Raptor 3 for the outer ring of the Starship booster" (Tweet). Retrieved 17 November 2026 – via X (formerly Twitter).
  61. 1 2 3 "Falcon 9". SpaceX. Archived from the original on 30 September 2016. Retrieved 30 September 2016.
  62. 1 2 3 "RD-171M". NPO Energomash. Retrieved 30 June 2015.
  63. 1 2 3 "RD-180". NPO Energomash. Archived from the original on 4 December 2015. Retrieved 30 June 2015.
  64. 1 2 3 "RD-191". NPO Energomash. Retrieved 7 April 2016.
  65. 1 2 3 "NK-33". Astronautix.com. Archived from the original on 25 June 2002. Retrieved 1 April 2015.
  66. 1 2 3 "SSME". Astronautix.com. Archived from the original on 28 December 2016. Retrieved 25 October 2021.
  67. 1 2 3 "RS-68". Astronautix.com. Archived from the original on 28 December 2016. Retrieved 25 October 2021.
  68. 1 2 "F-1". Astronautix.com. Archived from the original on 9 November 2013. Retrieved 2 November 2013.
[edit]