aws.dx.connection_bps_egress
(rate) | The bit rate for outbound data from the AWS side of the connection.
Shown as bit |
aws.dx.connection_bps_ingress
(rate) | The bit rate for inbound data to the AWS side of the connection.
Shown as bit |
aws.dx.connection_crcerror_count
(count) | The total count of cyclic redundancy check (CRC) errors on the connection. Deprecated — use aws.dx.connection_error_count instead.
Shown as error |
aws.dx.connection_discards_pps_egress
(rate) | The packet discard rate for outbound data from the AWS side of the connection, due to buffer overflows, interface congestion, or other network conditions.
Shown as packet |
aws.dx.connection_encryption_state
(gauge) | The encryption status of the connection. 1 indicates encryption is up, 0 indicates encryption is down. For LAG connections, 1 indicates all connections have encryption up. |
aws.dx.connection_error_count
(count) | The total count of all MAC level errors recorded since the last reported data point, including cyclic redundancy check (CRC) errors.
Shown as error |
aws.dx.connection_light_level_rx
(gauge) | Indicates the health of the fiber connection for ingress (inbound) traffic to the AWS side of the connection. |
aws.dx.connection_light_level_tx
(gauge) | Indicates the health of the fiber connection for egress (outbound) traffic from the AWS side of the connection. |
aws.dx.connection_pps_egress
(rate) | The packet rate for outbound data from the AWS side of the connection.
Shown as packet |
aws.dx.connection_pps_ingress
(rate) | The packet rate for inbound data to the AWS side of the connection.
Shown as packet |
aws.dx.connection_state
(gauge) | The state of the connection. 1 indicates up and 0 indicates down. |
aws.dx.virtual_interface_bgp_prefixes_accepted
(gauge) | The number of BGP prefixes accepted from the BGP peer on the virtual interface. |
aws.dx.virtual_interface_bgp_prefixes_advertised
(gauge) | The number of BGP prefixes advertised to the BGP peer on the virtual interface. |
aws.dx.virtual_interface_bgp_status
(gauge) | The state of the BGP peering session for the virtual interface. 1 indicates up and 0 indicates down. |
aws.dx.virtual_interface_bps_egress
(rate) | The bitrate for outbound data from the AWS side of the virtual interface.
Shown as bit |
aws.dx.virtual_interface_bps_ingress
(rate) | The bitrate for inbound data to the AWS side of the virtual interface.
Shown as bit |
aws.dx.virtual_interface_policed_bps_egress
(rate) | The number of bytes per second traveling from AWS to your on-premises network that were dropped by the Rate Limiter when exceeding the allocated bandwidth.
Shown as bit |
aws.dx.virtual_interface_policed_bps_ingress
(rate) | The number of bytes per second traveling from your on-premises network to AWS that were dropped by the Rate Limiter when exceeding the allocated bandwidth.
Shown as bit |
aws.dx.virtual_interface_policed_pps_egress
(rate) | The number of packets per second traveling from AWS to your on-premises network that were dropped by the Rate Limiter when exceeding the allocated bandwidth.
Shown as packet |
aws.dx.virtual_interface_policed_pps_ingress
(rate) | The number of packets per second traveling from your on-premises network to AWS that were dropped by the Rate Limiter when exceeding the allocated bandwidth.
Shown as packet |
aws.dx.virtual_interface_pps_egress
(rate) | The packet rate for outbound data from the AWS side of the virtual interface.
Shown as packet |
aws.dx.virtual_interface_pps_ingress
(rate) | The packet rate for inbound data to the AWS side of the virtual interface.
Shown as packet |
aws.dx.virtual_interface_utilization_egress
(gauge) | The percentage of bandwidth utilized for outbound data from the AWS side of the virtual interface.
Shown as percent |
aws.dx.virtual_interface_utilization_ingress
(gauge) | The percentage of bandwidth utilized for inbound data to the AWS side of the virtual interface.
Shown as percent |
