# Bricks

## Bricks

- [Welcome](https://docs.bierbot.com/master.md): This is the official documentation for BierBot Bricks. As you can tell, it's currently work in progress - but you may find the already completed ones interesting.
- [Terminology](https://docs.bierbot.com/getting-started/terminology.md): This page will briefly touch some of the most important terms (or concepts) used throughout our application.
- [Adding your first BierBot Brick](https://docs.bierbot.com/getting-started/adding-your-first-brick.md)
- [Setting up your first mashtun](https://docs.bierbot.com/getting-started/setting-up-your-first-mashtun.md): You've connected your first Brick to your brewery? Great! Next step is to assign its interfaces - most likely a relay and a temperature to a device.
- [Creating / importing recipes](https://docs.bierbot.com/getting-started/importing-recipes.md): Creating and importing recipes is super easy with BierBot Bricks.
- [Starting your first brew](https://docs.bierbot.com/getting-started/creating-a-new-recipe.md)
- [FAQ](https://docs.bierbot.com/getting-started/faq.md): This section answers or links the most commonly asked questions.
- [Overview - available Bricks](https://docs.bierbot.com/hardware/hardware.md): BierBot Bricks aims to be an open hub for all your brewery equipment - we call every them Bricks.
- [BierBot Brick](https://docs.bierbot.com/hardware/hardware/brick-101.md): The "Brick" has a temperature sensor and a relay that allows you to control the mash tun, refrigerator or fermenter.
- [TILT™](https://docs.bierbot.com/hardware/hardware/tilt.md)
- [iSpindel / iSpindle](https://docs.bierbot.com/hardware/hardware/ispindel.md): This page will show you how to integrate your iSpindel into Bricks!
- [Raspberry Pi](https://docs.bierbot.com/hardware/hardware/raspberry-pi.md)
- [Brick 32](https://docs.bierbot.com/hardware/hardware/brick-32.md)
- [HYDROM](https://docs.bierbot.com/hardware/hardware/hydrom.md): This page will show you how to integrate your Hydrom into Bricks!
- [RaptPill](https://docs.bierbot.com/hardware/hardware/raptpill.md): This page will show you how to integrate your RaptPill into Bricks!
- [Setup your Bricks account](https://docs.bierbot.com/using-bricks/setup-your-bricks-account.md)
- [Managing your brewery](https://docs.bierbot.com/using-bricks/managing-your-brewery.md)
- [Equipment](https://docs.bierbot.com/using-bricks/equipment.md)
- [Calibration](https://docs.bierbot.com/using-bricks/equipment/calibration.md)
- [PDI control settings](https://docs.bierbot.com/using-bricks/equipment/pdi-control-settings.md)
- [Equipment types](https://docs.bierbot.com/using-bricks/equipment-types.md)
- [Mashtun](https://docs.bierbot.com/using-bricks/equipment-types/mashtun.md)
- [BIAB / MLT / HLT](https://docs.bierbot.com/using-bricks/equipment-types/biab.md)
- [HERMS (advanced)](https://docs.bierbot.com/using-bricks/equipment-types/herms.md)
- [Fermenter](https://docs.bierbot.com/using-bricks/equipment-types/fermenter.md)
- [Manual mode](https://docs.bierbot.com/using-bricks/the-manual-mode.md)
- [Automatic mode](https://docs.bierbot.com/using-bricks/automatic-mode.md): The automatic mode runs your recipe consisting of multiple temperature seteps "automatically" and saves all temperatures, comments and other logs (volume, gravity) permanently.
- [Gravity history](https://docs.bierbot.com/using-bricks/automatic-mode/gravity-history.md): If you run a automatic to track the progress of your fermentation, a gravity graph will show up. Here's how to read it.
- [Brewlogs](https://docs.bierbot.com/using-bricks/brewlogs.md): Every brew that was completed using the automatic mode will be permanently stored as a brewing log so you can look up your temperature profiles, brewing duration, recipes steps and comments afterwards
- [Your settings](https://docs.bierbot.com/using-bricks/your-settings.md): Bricks is tailored towards customization and gives you full control over every unit used in the UI.
- [Bricks API](https://docs.bierbot.com/developer-section/bricks-api.md): The Bricks API is fully documented and open to everyone. If you are a software dev, this section will help you to turn your hardware into a "Brick" and interact with our software.
- [Connecting displays](https://docs.bierbot.com/developer-section/bricks-api/connecting-displays.md)
- [Pro API](https://docs.bierbot.com/developer-section/pro-api.md): The Pro API lets you interact with your brewerys' data, i.e. to enable custom build dashboards.
- [Changelog](https://docs.bierbot.com/developer-section/changelog.md)